Kerala

AOC

Works

Civil Works - Others

MANKULAM GP MAINTENANCE OF ANGANWADI CENTER NO.69 WARD 13

Local Self Government Department

Mankulam GP | Idukki, Kerala

Amount: ₹1.3 LCloses: 25 Mar 2025Closed

Timeline

Published17 Mar 2025
Closed25 Mar 2025
Awarded5 Jun 2026

Bids

Item Rate

1 Bid5 Jun 2026

#	Company	Amount	Rank	Status
1	ABRAHAM ITTIYAVIRA L1₹1.3 LAccepted-AOC KERALA	₹1.3 L	L1	Accepted-AOC Accept

BoQ Comparative

Line Items (11)

Sl No	Description	Qty	Unit	ABRAHAM ITTIYAVIRA L1
1.00ANGANWADI RENOVATION
1.00	16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	63.74	sqm	1,043.17 ₹66,496.87 Lowest
1.00	13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing	43.7	sqm	346.47 ₹15,140.74 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	68.3	kg	157.11 ₹10,730.61 Lowest
1.00	OD188449/2024-2025:DSR 51.20 Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	11.76	sqm	606.58 ₹7,133.38 Lowest
1.00	15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar	1.22	cum	610.58 ₹747.35 Lowest
1.01	50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.	1.02	cum	6,706.39 ₹6,840.52 Lowest
1.01	13.9.1:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster	9.52	sqm	425.03 ₹4,046.29 Lowest
1.01	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	22.97	sqm	335.2 ₹7,699.54 Lowest
1.01	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	32.04	sqm	72.87 ₹2,334.75 Lowest

Tender Value

₹1.3 L

EMD Value

₹3,177

Closing Date

25 Mar 2025, 2:00 pmClosed

Tender Inviting Organisation

Name

ASSISTANT ENGINEER

Address

LID AND EW SECTION MANKULAM GP

Work Description

MANKULAM GP MAINTENANCE OF ANGANWADI CENTER NO.69 WARD 13

Tender Information

Tender ID

2025_LSGD_728964_36

Reference Number

02/2024/AE/LIDEW/MKLM

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Item Rate

Period of Work

30 days

Location

Mankulam GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredBid security remittence (.pdf)

RequiredBid submission letter as per item no-1 Part-VI (.pdf)

RequiredIntegrity pact certificate as per item no-3 PartVI (.pdf)

RequiredPreliminary agreement as per item no-2 PartVI (.pdf)

RequiredRequisition for e-payment as per item no-6 PartVI (.pdf)

RequiredAffidavit as per item no-4 Part- VI (.pdf)

RequiredBidder valid registration certificate (.pdf)

RequiredBid documents with NIT (.pdf)

RequiredBid submission fee remittence (.pdf)

RequiredGST Document (.pdf)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹3,177

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

5 Jun 2026

Published

17 Mar 2025

Bid Opening

26 Mar 2025

Download Starts

17 Mar 2025

Download Ends

25 Mar 2025

Submission Starts

17 Mar 2025

Clarification Period

17 Mar 2025 - 25 Mar 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1217849.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

ABRAHAM ITTIYAVIRA

L1₹1.3 LAccepted-AOC

KERALA

Sl No	Description	Qty	Unit	ABRAHAM ITTIYAVIRA L1
1.00ANGANWADI RENOVATION
1.00	16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	63.74	sqm	1,043.17 ₹66,496.87 Lowest
1.00	13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing	43.7	sqm	346.47 ₹15,140.74 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	68.3	kg	157.11 ₹10,730.61 Lowest
1.00	OD188449/2024-2025:DSR 51.20 Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	11.76	sqm	606.58 ₹7,133.38 Lowest
1.00	15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar	1.22	cum	610.58 ₹747.35 Lowest
1.01	50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.	1.02	cum	6,706.39 ₹6,840.52 Lowest
1.01	13.9.1:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster	9.52	sqm	425.03 ₹4,046.29 Lowest
1.01	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	22.97	sqm	335.2 ₹7,699.54 Lowest
1.01	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	32.04	sqm	72.87 ₹2,334.75 Lowest

Sl No

Description

Qty

Unit

ABRAHAM ITTIYAVIRA

1.00ANGANWADI RENOVATION

1.00

16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

63.74

sqm

1,043.17

₹66,496.87

Lowest

1.00

13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing

43.7

sqm

346.47

₹15,140.74

Lowest

1.00

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

68.3

157.11

₹10,730.61

Lowest

1.00

OD188449/2024-2025:DSR 51.20 Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

11.76

sqm

606.58

₹7,133.38

Lowest

1.00

15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar

1.22

cum

610.58

₹747.35

Lowest

1.01

50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

1.02

cum

6,706.39

₹6,840.52

Lowest

1.01

13.9.1:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster

9.52

sqm

425.03

₹4,046.29

Lowest

1.01

13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

22.97

sqm

335.2

₹7,699.54

Lowest

1.01

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

32.04

sqm

72.87

₹2,334.75

Lowest