Construction of Compound wall, office, shed and toilet bathroom at fulsar tp 2/a, F.P. 27 Bhavnagar.

Excavation for foundation upto 1.5 m depth in any

type of soil including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto any lead

Boring holes 3.5 m deep in ordinary soil (for cast in

situ piles) and getting out the soil and disposal of

2 the surplus excavated soil as directed within a lead 30.00 380.00 RMT

of 50 Meter for following diameter of pipes.(iii)

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- Coarse sand : 6- graded stone

3 aggregates 20 mm nominal size) and curing 25.00 3710.00 Cum

complete including cost of formwork in (A)

Foundation and Plinth (upto 10 ton)

Providing laying controlled cement concrete M-250

and curing complete including the cost of form work

4 but excluding the cost of reinforcement for 65.00 6250.00 Cum

reinforced concrete work in GROUND BEAMS /

PLINTH BEAMS/coping/Column/slab

stone masonary work with 1:6 cement sand mortar

upto plinth level

brick work with 1:6 cement sand mortar in

superstructure upto any height for any thickness

with first class brick inculding all materials with

20mm thick sand faced cement plaster on walls

upto height 10 metres above ground level

7 consisting of 12mm thick backing coat of C.M. 1:3 1180.00 347.10 Sqm

(1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

Finishing wall with weather proof exterior plastic

emulsion paint on wall surface (two coats) after

one coat of primer to give an required shape even

shade after thoroughly brushing the surface to

8 remove all dirt, and remains of loose powdered 1180.00 140.00 Sqm

materials.etc complete The material shall be as

described in list of approved material.shade and

pattern as directed by Architects/City Engineer /

Providing Engineer in charge.

fixing M.S. grills of required pattern

using M.S. flats, bright bar, hollow MS sactions at

required spacing and frame all-round square or

round bars with round headed bolts and nuts or by

screws. Design and pattern as directed by Engineer

Providing TMT Bar FE 500D/500 reinforcement for

10 R.C.C. work including bending, binding and placing 9600.00 88.00 Kg

in position complete upto floor two level

11 morrum supply as selected by engineer incharge 29.10 401.00 cum

Vitrified tiles of grade a with 1:8 cement sand bed of

40 to 50 mm thick and cement slurry for fitting with

joint filling for flooring as per instruction given by

No ITEM QTY RATE UNIT AMOUNT

supply 0.80 mm thick corrugated G.I sheet with

cm side lap , 15 cm verticle lap with 8 mm dia G.I

J - bolt , ai bolt and galvanised and bitumen washer

water tank fitting - as per instruction supply 1000 ltr

capacity water tank having three protection layer

with all inlet, outlet and over flow pipe fitting

pvc plumbing pipe with consil and all type of

material including T -bend,nipple, elbow etc and

required fitting complete work inside or outside wall

as per site condition 20 mm size inside dia pipe

orissa type Wc of white color 580 mm with trap and

complete fitting work

17 chicken mesh supply for jointing 25.00 106.00 sqm

Providing cement vata (10cm. x 10 cm. size)

18 quarter round in cement mortar 1:1 including neat 25.00 24.28 rmt

cement finishing, watering etc. complete.

Providing and fixing S.W. gully trap with C.I. grating

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

standard weight.(i) Square mouth traps. (A)

Constructing bricksize P type.

masonry (upto 10forton)

underground C.I. Inspection chamber and bends

20 with briocks having croshing strength not less than 1.00 2932.92 nos

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

21 water connection with necessory fitting 1.00 1161.00 job

22 drainage connection with necessory fitting 1.00 1393.00 job

23 poweder coated aluminium section supply for 3.96 3437.00 sqm

pvc door supply work for toilet bathroom as per

24 required size with concrete/stone frame as per 1.00 1700.00 nos

instruction of engineer in charge

Point wiring for Light / Bell with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe

to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic box, single

mounting base frame covered with

textured/metallic front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid PVC pipe and

accessories Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earthwire

of 1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with

6A Modular type switch and hum free EME four or

more step type electronic fan regulator with

26 separately mounted and accessories with earth 1.00 710.00 pt

continuity of following type erected on PVC /

Metallic box, single mounting base frame covered

with textured/metallic front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid PVC pipe and

accessoriesCat. III

No ITEM QTY RATE UNIT AMOUNT

Point wiring for Individual Plug with & earthwire of

27 1.5 sq.mm (Green) both are of ISI marked 1.1 KV 6.00 290.00 pt

grade FRLS PVC insulated multistrand copper

Mains in following

with 1.1 KV type

to be erected concealed

PVC insulated ISI

marked stranded Copper conductor wire in

following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (a)

with medium class Rigid PVC pipe and

accessories(b) 2 wire 2.5 sq. mm

Miniature circuit breaker single pole 6A to 32A

suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA polyester powder coated and high

U.V. & corrosion resistance with diffuser and/or

Polycarbonate optics with company mark/name

to 300 V,Power Factor more than 0.9, THD <

30 %,CCT 4000 K to 6500K, Uniformity 5.00 710.00 Each

ratio>0.7,Luminaire efficiency> 85 lumens/watt

,LED driver efficiency > 85 % CREE / OSRAM /

PHILIPS Lumileds / NICHIA /

SEOUL/Bridgelux(U.S.A.) make LED used for

luminaire. (Each fitting required LM-79 & LM-80

Certificates)(A) Tube Light with integral/ non-

integral driver(c) 20-22 Watts, Surge - 4KV,IP-20

Providing & erecting Approved make Power Saving

50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz

mm sweep complete having 3blades with

aluminium blades with , canopy & 30 cms. down rod

erected with 24/ 0.2, 3 core flexible wire with

earthing.(Make shall be approved by Engineer in

Approved make ELCBs / RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA and suitable for

operation on 3 phase and neutral 415V. having

characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component for following Max. rating erected as

directed.(iii) 63 Amps. FP Cat. III