KUNDERI ANGANWADI CONSTRUCTION RETENDER

Amount

Abganwadi work

Laterite stone of size 35*20*20cm

Portland Cement

Coarse sand - zone III (M-Sand for Concreting Works)

Sundries

Structural steel such as tees, angles, channels and R.S. joists

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Second class kail wood in planks

Second class kail wood in scantling

Hollock ballies 125 mm diameter

Twisted steel/deformed bars

Adjustable span ESO+SI (2.35-3.40)

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Stone Aggregate(single size): 06 mm nominal size

Stone for masonry work

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

wall form panel 1250x500mm

Corner angle 45x45x5mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip(bridge clip)

Single clip

M. S Tube 40 mm dia

Average rate of mild steel round bars for reinforcements

Mild steel round bar 12 mm dia and below

Flats up to 10 mm in thickness

Red oxide Zinc chromate primer

Fine sand - zone IV (M-Sand for Plastering Works)

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 in all shades designs except White,Ivory,Fume Red Brown etc.

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Mild steel round bar above 12 mm dia

Oxidised mild steel handles 125 mm

Oxidised mild steel screws 25 mm

Anodised Aluminium tower bolt(barrel type)300x10 mm

Chromium plated Brass screws 30 mm

Iron hooks & eyes 100 mm

Synthetic enamel paint in black or chocolate shade

Plastic emulsion paint

Stainless steel(Grade-304)hollow section round/square tubes

Stainless steel bolts/square bar and plates

wall form panel 1250x450mm

Corner angle 45x45x5mm 2.50 m long

Column clamp 450x1070 mm

Prop 2 m(2-3.5m)

Vitreous China orrisa type w.c. pan size 580 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

100 mm S.C.I. trap with vent heel

Vitreous china flat back wash basin 550x400 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Polyethylene water storage tank with cover and suitable locking arrangemnet

PVC pipe 25 mm outer dia. 10 kgf/cm2

PVC pipe 63 mm outer dia. 6 kgf/cm2

PVC pipe 110 mm outer dia. 4kgf/cm2

PVC Elbow 110 mm dia

PVC Elbow 63 mm dia

PVC 45 degree Elbow 63 mm dia

Interlocking C.C paver block(60 mm thick,M-30)

SHOJI A J

Bidder Name

SHOJI A J

Michle vp