Sl No.01

Dismantling worn out wall or ceiling of Tarja or Durmamat and removing the dismantled materials as directed.

Supplying,fitting & fixing in position suspended false ceiling with frame work of aluminium hollow section of size 50mm X 25mm (2.0mm thickness) combined with aluminium corners of size 38mm X 25mm, suspended by aluminium hollow tube section of size 38mm X 25mm having size of 600mm X 600mm ceiling with aluminium composit panels (ACP) - Interior grade of thickness 3.0mm comprising of proctective film, polyester coating, primer, aluminium coil, adhesive film, polyethylene core again with one layer adhesive film, aluminium bottom coating and finally service coating as per manufacturer's specification finished with aluminium screw and silicon sealent complete in all respect including all incidental charges etc. as per direction of Engineer-in-charge.

Providing and fixing of false ceilingwith powder coated exposedG.I. grid suspensionsystem(E-GridU-1520orequivalent loadcarryingcapacitywithmid spandeflectionnotexceeding1/360spanwithhangerspacingof1200mmc/c) consistingofMainRunner3600mmlong,CrossTee1200mm/600mmlongand Wall Angle. TheWall Angle shall be fixed onPVCDashFasteners on the perimeterofthewallbysteelscrewswithdistance300mmc/c.The Main Runners [email protected] Tee 1200 mm will be inserted inthepre-cut slotsofMainRunnerataregularintervalof600mmtoformamodulargridof 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the CrossTee1200mmlongtofinallyformagridof600mmX 600mm.Gridofmodulesize600mmX600mmshallbesupportedby6mmdia G.I.wire frompurlins / soffit. 15mmthickOWAcousticBoard (MineralFiber AcousticCeilingTiles)ofapprovedpaternandsize595mmX595mmwithNRC value>0.65shouldbeplacedintheGridmodule toformaFalseCeiling.All complete as per the drawing & directions of Engineer-in-charge. In ground floor.

Wall panelling / partitionwithMelamine faced 3 layered flat pressedwood particleboardofapprovedmakeandbrandasperdirectionofEngineer-inCharge of requisite grade bondedwith phenol formaldehyde synthetic resin conformingtoIS:848-1974(excludingthecostof supportingframeworkand teak wood battens / lipping),In Ground Floor, A) Plain : Conforming to IS: 3087 - 1985 i) Plain : Exterior grade. b) 12 mm thick

c) 18 mm thick

Supplyingfitting,fixingdecorativelaminationconformingtoIS:2046:1995as perapprovedmake, brand, finishand thicknesswith fitting, fixing thesameon Particle/MDF/PlyBoardswithrecommended/approvedadhesivewithproper clipping the sides for better attachment as per direction of Engineer-incharge.Therateincludes thecostof labour,adhesiveandall incidentalcharges thereof. In ground floor, Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm

A) Supplying&layingof approvedbrandof scratchproof, semi flexible P.V.C. blended homogeneous marble Vinyle flooring in tilesconforming toIS:3461, fixingwithsynthetic acrylic adhesive after preparing the floor, levelling & smothaningwhennecessarywith suitable putty, as per the design & instruction of the Engineer-in-charge. 2 mm thick

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping], (ii) 6mm

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping], (iv) 12mm

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping], (vi) 19mm

9 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. ii) 4mm thick coloured / tinted / smoke glass.

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. viii) 8mm thick coloured / tinted / smoke glass.

(i) Door stopper.(Brass)

(b)Supplying' Godrej'mortice lockchromiumplatedwithkeys6leversincluding fitting & fixing complete.

i) Ironhaspbolt of approvedquality fittedand fixedcomplete (oxidised)with 16mm dia rod with centre bolt and round fitting. (a) 200mm long

Anodised aliminiumD-type handle of approved quality manufactured from extruded sectionconforming to I.S. specification (I.S. 230/72) fittedand fixed complete: (a) With continuous plate base (Hexagonal/ Round rod) (i) 75 mm grip x 10 mm dia rod.

Electrical and IT

Please Enable Macros to View BoQ information