Electrical wiring with light fittings of newly constructed 03 Nos. Quarters at Birhor Colony under CRS Barkakana.

Amount

Wiring for light/fan point/exhaust fan point/call bell point with 1.5 sq mm. FRLS PVC insulated copper conductor single core single core cable in surface/ recessed medium class PVC conduit, with piano type switch , phenolic laminated sheet, suitable size M.S. box & earthing the point with 1.5 Sq. mm. FRLS PVC insulated copper conductor single core cable etc, as reqd. Group B

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required. 2x2.5 sq.mm +1x2.5 sq. mm earth wire. (For Light circuit)

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required. 2x 4 sq.mm+1x 4 sq. mm earth wire. (For Power circuit)

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required. 2x 6 sq.mm+1x 4 sq. mm earth wire. (For Main switch to meter)

Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.

Supplying & fixing metal box of 180 mm x 100 mm X 60 mm deep (normal size) on surface or recess with suitable size of phenolic laminated sheet cover in front including P/F 6 pin 5/6 & 15/16 amps socket outlet & 15/16 amps piano type switch connection, painting etc. as required.

Supplying & fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way Double door.

Supplying & fixing 5 Amps to 32 Amps rate 240 V ‘C’ series MCB suitable for inductive load of following poles in the existing MCB DB complete with connections testing & commissioning etc as req.. Single Pole

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc. as required.

Supplying & fixing brass batten/angle holder including connection etc. as reqd.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Earthing with copper earth plate 600 mm x 600mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connection etc. as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLOC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing of 32 mm dia X 2.00 metres long GI. pipe (medium class) bracket for mounting of fluorescent/ HPMV/HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as reauired.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface / recessed steel / PVC conduit as required. 2 x 6 sq.mm. (For Service connections)

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 250 mm X 300 mm X 100 mm ( For Meter, DB and Main Switch).

Providing and fixing of LED Batten 20 watt. (Reputed make).

Providing and fixing of LED Street light fitting 110 watt. (Reputed make).

Providing and fixing of Energy meter, outdoor single phase, 2 wire, AC static watt hour meters (Reputed Make).

Total impact of GST for the purpose of CTC

M/S B.N. PANDEY (BID ID -1176479)