Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹10.5 L+₹76,897.47 (7.92%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | l3₹10.6 L+₹87,880.04 (9.05%)Rejected-AOC | l3 | Rejected-AOC L3 | |
| 4 | L4₹11.3 L+₹1.6 L (16.1%)Rejected-AOC | L4 | Rejected-AOC L4 |
| Sl No | Description | Qty | Unit | ABDUL RAHIMAN K A L1 | SHARAFUDHEEN M K L3 | A ABOOBACKER L4 | VINOD V.K L2 |
|---|---|---|---|---|---|---|---|
| 1.00Maintenance work | |||||||
| 1.00 | 15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 168.67 | sqm | 40.63 ₹6,853.14 | 39.37 ₹6,640.62 | 47.16 ₹7,954.57 | 31.35 ₹5,287.87 Lowest |
| 1.00 | 11.41.1:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm. | 173.62 | sqm | 1,203.28 ₹2,08,918.29 Lowest | 1,280.23 ₹2,22,278.65 | 1,396.43 ₹2,42,453.76 | 1,336.5 ₹2,32,048.48 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.36 | cum | 6,641.61 ₹2,390.98 Lowest | 6,855.28 ₹2,467.9 | 7,707.71 ₹2,774.78 | 7,167.6 ₹2,580.34 |
| 1.00 | OD437942/2025-2026:Steel work for purlin/single section with MS tubes including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer, including welding and bolted
with special shaped washers etc. complete | 2,666.55 | kg | 112.36 ₹2,99,613.56 Lowest | 130.45 ₹3,47,851.45 | 130.49 ₹3,47,958.11 | 126 ₹3,35,985.3 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 562.8 | sqm | 605.58 ₹3,40,820.42 Lowest | 633.72 ₹3,56,657.62 | 702.8 ₹3,95,535.84 | 653.4 ₹3,67,733.52 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 42 | metre | 406.32 ₹17,065.44 Lowest | 420.39 ₹17,656.38 | 471.55 ₹19,805.1 | 443.85 ₹18,641.7 |
| 1.01 | OD437943/2025-2026:Providing and fixing 150 mm half cut PVC pipe over flat iron brackets 20x5 mm size | 84 | metre | 189.41 ₹15,910.44 | 182.79 ₹15,354.36 Lowest | 218.38 ₹18,343.92 | 264 ₹22,176 |
| 1.01 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 52.92 | sqm | 870.29 ₹46,055.75 | 1,007.52 ₹53,317.96 | 1,010 ₹53,449.2 | 530 ₹28,047.6 Lowest |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 36.54 | sqm | 919.59 ₹33,601.82 Lowest | 1,009.44 ₹36,884.94 | 1,067.21 ₹38,995.85 | 975 ₹35,626.5 |
Tender Value
₹12.7 L
EMD Value
₹31,769
Closing Date
4 Feb 2026, 6:00 pmClosed
ASSISTANT ENGINEER
Office of the Asst. Engineer LID EW Section CHEMNAD G.P
Pro no-61/25-26 Maintenance of G U P S Thekkil Paramba in Chemnad GP-General Civil Work
2026_LSGD_830876_6
09/2025-26/AE/LSGD/CHMD
Open Tender
Civil Works - Buildings
Item Wise
180 days
CHEMNAD GRAMA PANCHAYAT
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹31,769
Yes
20 May 2026
28 Jan 2026
6 Feb 2026
28 Jan 2026
4 Feb 2026
28 Jan 2026
Maintenance work
15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
11.41.1:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm.
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
OD437942/2025-2026:Steel work for purlin/single section with MS tubes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
OD437943/2025-2026:Providing and fixing 150 mm half cut PVC pipe over flat iron brackets 20x5 mm size
21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1396065.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.29 MB
Tendernotice_2.pdf
PDF • 0.29 MB
Tendernotice_3.pdf
PDF • 0.26 MB
Tendernotice_4.pdf
PDF • 0.19 MB
Tendernotice_5.pdf
PDF • 0.26 MB
Tendernotice_6.pdf
PDF • 0.25 MB
Tendernotice_7.pdf
PDF • 0.24 MB
612526.pdf
Tender Documents • 1.81 MB
BOQ_1396065.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .