UPGRADATION OF SNCOs LIVING IN ACCOMMODATION (PHASE-II) AT AF STN BARRACKPORE

Dismantling of timber scantling 40 Sqcm and over in section, in any position in framed work and removing materials from site of work complete all as specified and directed.

Material and labour for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality-A including one shop coat of zinc chromate primer complete all as specified and directed.

Supply and fix rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410 (Gde E-250 quality-A including one shop coat of zinc chromate primer complete all as specified and directed.

Supply and fix mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 including one shop coat of zinc chromate primer complete all as specified and directed.

Supply and fix mild steel screw bolts diameter of neck 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm and n exc 15cm long complete all as specified and directed.

Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Refixing, securing, erecting only in repair with self tapping screws including minor mason work and filling of holes etc with concrete and making good of existing 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain/corrugated steel sheet as in roof covering/cladding to wall or in any position complete all as specified and directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets any thickness, including cover fillet / snap grid complete all as specified and directed.

Supply and fix false ceiling with powder coated exposed GI grid suspension system (E-grid T-2430 or equivalent load carrying capacity- 12.50 Kg/sqm with mid span deflection n. exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long of size- 24x38mm x 0.25mm thick, cross tee of section size- 24x27mm x 0.25mm thick 1200mm/600mm long and wall angle of section size 22x22mm x 0.4mm thick. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The main runners to be placed @ 1200mm, The cross tee 1200mm will be inserted in pre-cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm. Additional cross tee of 600mm shall be placed perpendicular to the cross tee1200mm long to finally form a grid of 600mm x 600mm shall be supported by 4mm dia G.I. wire from perlins/soffits. 6mm thick high pressure steam cured non Asbestos fibre cement designer ceiling board (density> 1200kg/cum, modules of rupture (M.O.R)-15.85 Mpa, thermal conductivity (k)-0.0872 W/mk) of size 595mm x 595mm, confirming to IS 14862 & type B catagory III of ISO 8336-1993, (Reaction of fire-A2 -s1-d0) tested as per EN 13501 Part-I & BS-476 part-4, 5, 6 & 7, should be placed in the grid module to form a false ceiling complete all as specified and directed. Make: Armstrong/ Saint Gobain/ Lafarge/ Everest.

Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and including dismantling of old unseviceable existing tank and removing from site complete all as specified and directed.

Supply and fix gun-metal globe or gate valves 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Material and labour for cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed.

Supply and fix 15 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed.

Supply and fix 20 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed.

Dismantling of steel water tanks of capacity exc 250 liters but n. exc 500 liters with frames and making good disturbed surfaces complete all as specified and directed.

Supply and fix in repair 15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fix in repair brass chromium plated shower rose 125mm size with or without swivel joint complete all as specified and directed.

Supply and fix in repair 15mm bore water saving long body, fancy type, chromium plated, bib tap, cast copper alloy with quarter turn handle, screwed down for iron pipe complete all as specified and directed.

Supply and fix in repair PVC connection pipe 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Supply and fix in repair soap dish, brass, chromium plated complete all as specified and directed.

Supply and fix in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fix in repair 15mm bore brass angle cock fancy type, chromium plated for iron pipe complete all as specified and directed.

Supply and fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debrish from site complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces in two layers, first layer of 10mm thick and top layer of 5mm thick with using liquid water proofing coumpound (WPC) @ 200ml/50Kg bag or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. Note : WPC will be measured and paid separately under respective item.

Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces fair and even on wall complete all as specified and directed.

Material and labour for scrubbing cleaning of surface (brick surface) followed by two coats of two component acrylic polymer-modified cementitious high performance coating as per manufacturer's instruction complete all as specified and directed. Make: SmartCare Damp Block 2K brand of Asian Paints Ltd or equivalent brand of make Pidilite / Fosroc/STP.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified and directed.

Taking down chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters exc. 1.50 sqm but n.exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and directed.

Supply and fix solid PVC door frame of size 50x47 mm made out of 5mm PVC sheet plain colour reinforced with MS square tube as per specification and drawing given in SSR Part-II 2020 complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification and drawing given in SSR Part-II 2020 complete all as specified and directed.

Material and labour for well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Material and labour for well-seasoned 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc. 13 sqcm but not exc. 25 sqcm including taking down existing fillets complete all as specified and directed.

Supply and fix factory made 30mm thick second class hardwood plain framed panelled shutters (any numbers of panels) with panels of timber flat both sides (feather edged) or of veneered particle board medium density, wood particle with commercial face veneers and fitted to chowkats complete all as specified and directed.

Supply and fix 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified and directed.

Suplly and fix 125mm size stainless steel butt hinges, medium weight complete all as specified and directed.

Supply and fix 150mm long aluminium handles, cast type, anodized complete all as specified and directed.

Suplly and fix 200 mm long aluminum anodised barrel tower bolts extruded section complete all as specified and directed.

Suplly and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.

Supply and fix door stopper 150mm long cover plate, aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed to shutter complete all as specified and directed.

Supply and fix door closer hydraulically regulated aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) bends with access door any radius complete all as speified and directed.

Supply and fix 110mm bore PVC (SWR) juction single (single T) equal or unequal with access door complete all as speified and directed

Supply and fix 110 mm bore PVC (SWR) vent cowl complete all as specified and directed

Supply and fix 32mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 complete all as specified and directed.

Supply and fix 125 / 110 mm size PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fix 100mm PTMT grating doom (minimum weight 25gms) complete all as specified and directed.

Supply and fix in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Supply and fix in repair vitreous china white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts and making all necessary connections including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as specified and directed.

Supply and fix in repair vitreous china urinals, bowl type, white flat back of size 465x355x265 (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), including 32mm dia CP waste coupling and urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms) complete all as specified and directed.

Supply and fix in repair counter top flat back vitreous china wash hand basin, white, of size 560mmx410mm fixed to granite/marble top slab, including cutting for and pinning in and 32 mm bore cast copper alloy chromium plated waste fittings and 32mm dia PVC waste pipe 800mm long including 15mm bore fancy type long body swan neck type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for glazed ceramic tiles of size 300x450x7-8 mm (premium quality) coloured in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even and smooth without using extra cement including forming costruction joint 30mm deep x 10mm wide filled with sealing compound of group 'A' complete all as specified and directed.

Material and labour for ceramic, non skid coloured tiles (premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exc. 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for vitrified ceramic tiles (premium quality) 8 to 10mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

All as per item No 67.00 above but in skirting and dado laid over and including 10mm thick rendering in cement mortar (1:4) and -ditto-.

Material and labour for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Providing edge moulding to 18-20mm thick marble stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinch chrome primer complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply only liquid water proofing compound (WPC) complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including applying 2mm thick wall care putty complete all as specified and directed.

Materials and labour for complete removal of existing treatment of old decorated surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including applying 2mm thick wall care putty including preperation of surface complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.including brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base for laying floor finishes complete all as specified and directed.

Supply and fix powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fix powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Supply and fix 4.80 mm thick sheet glass ordinary quality and glazing with oil putty or wooden/ aluminium/ rubber beads, nails etc in square/ rectangle not exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fix mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders, framed balusters, walk ways; railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviceable bricks and debris from site complete all as specified and directed.

Supply and fix 15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fix brass chromium plated shower rose 125mm size with or without swivel joint complete all as specified and directed.

Supply and fix 15mm bore water saving long body, fancy type, chromium plated, bib tap, cast copper alloy with quarter turn handle, screwed down for iron pipe complete all as specified and directed.

Supply and fix soap dish, brass, chromium plated complete all as specified and directed.

Supply and fix 15mm bore brass angle cock fancy type, chromium plated for iron pipe complete all as specified and directed.

Dismantling of stone slabs and tiles laid dry of any description or thickness in floors, aprons etc. complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8), type D-2, (using 40mm graded stone aggregate) as in sub base of floor or pavings etc complete all as specified and directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Material and labour for light/fan point wiring (concealed type) with single core PVC insulated unsheathed multistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including heavy duty rigid non metalic 20mm dia PVC conduit with accessories including with 1.2mm thick pressed steel terminal boxes in flush to existing wall surface with 3mm thick bakelite sheet top cover (ISI marked) fixed with chromium plated brass screws and cap washers suitable for housing switches, sockets and regulators with all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) multistranded FRLSH copper conductor as earth continuity wire and connected to earth dully including taking down existing point wiring including fixture and fittings complete all as specified and directed. Note: (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rate shall be included for cuttings /chasing the wall and making good disturbed surfaces to fix PVC conduit and MS terminal box.

All as per item No. 91.00 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board and -ditto-.

All as per item No. 91.00 here-in-before but for one five pins 5 Amps socket outlet point on same board and -ditto-.

All as per item No. 91.00 here-in-before but for 15 amps socket outlet on independent board with 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dolly and -ditto-.

Supply and fix switch piano one way 5/6 amps 240 volts, single pole complete all as specified and directed.

Supply and fix socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.

Supply and fix switch socket combination 2 in 1, 5 pin , 5 amps flush type complete all as specified and directed.

Supply and fix switch socket combination 5 in 1, 5/15 amps socket complete all as specified and directed.

Supply and fix ceiling rose, 3 terminals, fabricated of PVC/Polycarbonate, isolated body complete all as specified and directed.

Supply and fix delux stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply and fix in repair sheet metal enclouser SPN DB 4 ways double door having facility to fix MCB in incomer and MCBs in outgoing, IP-43 type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed.

Supply and fix in repair MCB SPN, 240 Volts, 40 amps, "C" series, breaking capacity 10 KA complete all as specified and directed.

Supply and fix in repair MCB SP, 240 Volts, of 6 to 32 amps current rating, 10 KA breaking capacity "C" series complete all as specified and directed.

Supply and fix 300mm sweep steel body exhaust fan AC single phase 230/240 volt. 1400 RPM, heavy duty, ISI marked, along with metal blade powder coated metalic finish with GI sheet louvers, low noise including necessary electric connection with and including cutting/making opening having dia of the hole for 300mm sweep exhaust fan in any type of walls of any description with nut, bolt, washer and making good distrubed surfaces complete all as specified and directed.

Supply and fix ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. minimum air delivery 210 CFM with service value 6.00 BEE. 5 star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix in repair LED tube light fitting 1 x 20W (+/- 5%), 220V, AC with extruded strip in thermally conductive material & extruded housing in optically efficient material milky white with system lumen efficacy > 120 lumen per watt minimum system 2300 - 2400 and chip, Integrated electronic driver, SMD based LED constant current supply with double sided connection to avoid short circuit and surge protection greater than 2.5 KV, IP 20 protection and CRI>80, Power factor > 0.95, THD less than 15%, correlated Colour temperature (CCT) of 6500K, Operating Voltage of 140 V to 270 V, frequency of 50Hz burning hours 50000 hours with comprises of CRCA pre coated metal housing including connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix in repair LED lights fittings with extruded aluminium housing, high quality PC diffuser, efficacy- 100lm/W, 10 watt, 220V, AC, 6500K, CRI ≥80, 2 feet long, integrated design including connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Material and labour for concealed submain wiring comprising single core , 2 Runs of 4 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in PVC conduit and its fittings complete including provision of 1x4 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete including taking down old unserviceable sub main wiring complete all as specified and directed. Note :- (a) Cost for extra length of cables / wire required for connection to MCBs/DB's shall be included in quoted rates. (b). Cost for cuttings /chasing of wall etc and making good the disturbed surface shall be included in quoted rates.

Supply and fix in repair LED street light fitting 35 Watt, 230 volts made with pressure die cast housing with toughened glass with high powered LED, IP-66 protection high power LED with secondary lenses and system efficiency should be minimum 110 lumen per watt. Driver should be BIS approved silicon filled potted driver with inbuilt 4KV surge protection device, THD shall be <10%, power factor >.95, CCT 5700K and brand name should embossed/engraved on the LED fitting for traceability till life complete all as specified and directed.

Material and labour for street light bracket made of 1.5 meter long GI pipe of light grade of 40 mm dia in proper shaped, bend, threaded and drilling holes for wire entry and MS clamps of flat iron of size 40x5mm of suitable length in 2 pairs including nut bolts etc of suitable size including taking down old unserviceable street light bracket cmplete all as specified and directed.

Material and labour for earthing complete with GI earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by 20 mm bore GI pipe (medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x6 cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion complete all as specified and directed. Note:- GI wire upto 7.5m length including testing shall be included in quoted rates.

Material and labour for earth continuity conductor or main earthing lead with 4mm dia GI wire, fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or DB's / Indoor type LT PBs or any other indicated situation for loop earthing etc complete all as specified and directed

Supply installation testing and commissioning of Electric storage water heater (rust and shock proof body) with attractive looks and corrision resistance inner tank having capacity 25 litre, 5 star rated with multi function safety valve , heating element, indicating lamps etc all as per following specifications:- (a) Power / Input : 8.7 Amp, 230 V, 50 Hz (b) Rated Power input in KW : 2 KW (c) Maximum rated Pressure : 8 Bar (0.8 Mpa) (d) Storage Capacity : 25 litre (e) Installation type : Wall mounted Vertical (f) Mean Hot Water Outlet - 75 degree celcius (g) Mixing factor - 30 % maximum (h) Water Proof degree - IP x 4 (j) Class of appliance - Class-I (k) Heating element : Incoloy glass coated heating element, superior heating performance with excellent resistance to both oxidation and carbonization at high temperature setting . Resists corrosion against extreme and hard water conditions with minimum energy loss. (l) Inner container : It shall be Feroglass coating, made of ultra thick super cold rolled steel plates with superior corrosion resistance and ' anti-rust property'. (m) Anode rod - The tank has an anode rod with a stainless steel core. (n) Insulation : CFC free thicker PUF insulation. (o) Star Rating : 5 Star from BEE complete all as specified and directed. Make : Bajaj/ USHA/ AO Smith/ Havells/ Crompton