Maintenance and Repairing Work of Various Buildings at Umarwada WDS, Ashwinikumar WDS, Puna WDS-2, Magob WDS and Other places of Hydraulic Department in Old East (Varachha) Zone-A, Surat.

Name Of Work :- Maintenance and Repairing Work of Various Buildings at Umarwada WDS, Ashwinikumar WDS, Puna WDS-2, Magob

WDS and Other places of Hydraulic Department in Old East (Varachha) Zone-A, Surat.

DESCRIPTION Qty & M.R (W/O Unit Total

A. GENERAL CONSTRUCTION ITEAMS

1 1 A B,C Excavation for foundation includ. sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.

Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 Mt. depth 30 123.13 C.M.

2 2 A B,C Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.

Comp. (A) Loose or Soft soil

Executed With Manual Labours

(1) Up to 1.5 Mt. depth 30 212.52 C.M.

3 3 Providing & Laying C.C 1:5:10 (1cement :5coarse sand :10 graded stone agg.

40 m.m Nominal size )& curing comp. excl. cost of from work in :Foundation 30 2,606.92 C.M.

4 4 Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8 graded

stone agg. 40 mm nominal size) & curing comp. excl.cost of form work in

(A) Foundation and Plinth

5 5 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

20m.m Nominal size)&curing comp. excl. cost of form work in :(a) foundation 40 3,095.25 C.M.

6 6 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form work but

exclu. Cost of reinforcement for reinforced concrete work in : 30 4,250.50 C.M.

(A) Foundation, footing, Base of columns and Mass concrete.

7 7 Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

8 8 Providing and filling in foundation and plinth with yellow soil or selected soil

in layers of 20 cm. thickness including watering ramming and consolidating 80 301.78 C.M.

9 9 Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:3

graded graded stone agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incl.. Cost of form work but excl. Cost of reinforcement for R.C.C.

(1)Having c/s area up to 0.08 s.mt- Ground Floor 5 12,844.32 C.M.

First Floor 5 12,885.28 C.M.

Second Floor 5 12,926.24 C.M.

Terrace (third) Floor 5 12,967.19 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt - G.F 5 11,166.97 C.M.

First Floor 5 11,207.92 C.M.

Second Floor 5 11,248.88 C.M.

Terrace (third) Floor 5 11,289.83 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 1 9,201.68 C.M.

First Floor 1 9,242.63 C.M.

DESCRIPTION Qty & M.R (W/O Unit Total

Second Floor 1 9,283.59 C.M.

Terrace (third) Floor 1 9,324.54 C.M.

(1)Having c/s area up to 0.08s.mt- Ground Floor 5 9,102.61 C.M.

First Floor 5 9,143.56 C.M.

Second Floor 5 9,184.52 C.M.

Terrace (third) Floor 5 9,225.47 C.M.

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m - G.F 5 8,174.41 C.M.

First Floor 5 8,215.36 C.M.

Second Floor 5 8,256.32 C.M.

Terrace (third) Floor 0 8,297.27 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 1 7,086.88 C.M.

First Floor 1 7,127.84 C.M.

Second Floor 0 7,168.79 C.M.

Terrace (third) Floor 0 7,209.75 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'.- G.F 10 7,984.42 C.M.

First Floor 1 8,025.37 C.M.

Second Floor 1 8,066.33 C.M.

Terrace (third) Floor 0 8,107.28 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.- G.F. 1 7,396.96 C.M.

First Floor 1 7,437.92 C.M.

Second Floor 1 7,478.87 C.M.

Terrace (third) Floor 0 7,519.83 C.M.

(4) Slabs having more than 13 cm. Thickness -- G.F 1 6,813.01 C.M.

First Floor 5 6,853.96 C.M.

Second Floor 0 6,894.92 C.M.

Terrace (third) Floor 0 6,935.87 C.M.

(D) LINTELS: -- G.F 1 9,982.37 C.M.

First Floor 1 10,023.32 C.M.

Second Floor 0 10,064.28 C.M.

Terrace (third) Floor 0 10,105.23 C.M.

(E) CHAJJAS: -- G.F 1 5,576.81 C.M.

First Floor 1 5,617.76 C.M.

Second Floor 0 5,658.72 C.M.

Terrace (third) Floor 0 5,699.67 C.M.

10 10 Providing and laying cement concrete work 1:1.5:3 [1 Cement, 1.5 coarse

sand:3 graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of form work and reinforcement for reinforced concrete work

(A) Staircase including landings etc.

Ground Floor 2 7,698.11 C.M.

First Floor 2 7,739.06 C.M.

Second Floor 0 7,780.02 C.M.

Terrace (third) Floor 0 7,820.97 C.M.

(B) Vertical and horizontal fins

Ground Floor 2 11,613.07 C.M.

First Floor 2 11,654.03 C.M.

Second Floor 0 11,694.99 C.M.

Terrace (third) Floor 0 11,735.00 C.M.

11 11 Providing and Fixing TMT/CRS bars steel reinforcement for R.C.C.work

including bending, binding and placing in position etc.comp.

First Floor 500 78.34 Kg.

Second Floor 500 79.39 Kg.

Terrace (third) Floor 0 80.44 Kg.

12 12A Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement :

6 -fine sand)(C) Fly Ash Bricks

First Floor 5 5,018.55 C.M.

DESCRIPTION Qty & M.R (W/O Unit Total

Second Floor 0 5,307.27 C.M.

Terrace (third) Floor 0 5,595.99 C.M.

13 13A,B Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 - coarse sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 25 712.81 S.M.

First Floor 5 719.37 S.M.

Second Floor 0 725.94 S.M.

Terrace (third) Floor 0 732.50 S.M.

14 14 Uncoursed rubble masonary with hard stone of approved quality

in foundations and plinth in cement mortar 1:6 (1 Cement : 6 sand) 50 2,586.61 C.M.

including leveling up etc. complete.

15 15 Pointing on Coursed stone masonary with cement mortar 1:3 (1 cement :

Sand) ---(A) Flush Pointing

(B) Ruled Pointing 0.00 105.24 S.M.

16 16 Pointing on Uncoursed stone masonary with cement mortar 1:3 (1 cement :

Sand) ---(A) Flush Pointing

(B) Ruled Pointing 0.00 114.25 S.M.

17 17 Providing Rubble Pitching with hard stone of approved quality in

cement mortar 1:6 (1 Cement : 6 Coarse sand) including leveling up 5 2,550.00 C.M.

,Curing etc. complete excluding pointing

18 18 Providing and filling rubbles including hand packing and filling interstices

with quarry spalls behind abutments and between returns as directed. 5 1,094.11 C.M.

19 19A,B Providing & Applying 10mm.th.cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth with

a floating coat of cement slurry mixed with admixture of lime or neeru

in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For 1000 199.28 S.M.

wall and similar surfaces -- Ground Floor

First Floor 50 228.84 S.M.

Second Floor 0 258.39 S.M.

Terrace (third) Floor 0 287.94 S.M.

For ceilings &soffits of stairs

Ground Floor 50 225.34 S.M.

First Floor 50 254.89 S.M.

Second Floor 0 284.45 S.M.

Terrace (third) Floor 0 314.00 S.M.

20 20 Providing & Applying 15mm.th.cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth with

a floating coat of cement slurry mixed with admixture of lime or neeru

in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For 350 249.39 S.M.

wall and similar surfaces -- Ground Floor

21 21 20mm thick sand faced cement plaster on walls for height more than

10 metres above ground level consisting of 12mm thick backing coat of C.M.

1:3 (1- cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 25 347.42 S.M.

1- sand) etc. complete.

22 22 Providing 20 mm thick double coat mala cement plaster on brick /

concrete work for plastering comprising of base coat 12 mm thick

cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse 25 286.10 S.M.

sand) finished with trovel including scaffolding curing etc. complete.

23 29 Providing throating or plaster drip and moulding it to R.C.C. chajja etc.

comp.. For all floor

24 24 Providing 20 mm deep finished groove in plaster in line and level etc.

Comp. For all Floor (M.R.)

25 25 Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M.

1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of slab including 50 1019.39 S.M.

rubbing and polishing etc. complete.

DESCRIPTION Qty & M.R (W/O Unit Total

26 26 Providing and laying polished kota stone slab 25mm thick in risers of

steps, skirting Dedo and pillars laid on 10mm thick cement mortar 1:3

(1- Cement : 3 coarse sand) and jointed with gray cement slury mixed

with pigment to match the shade of slab including rubbing and polishing 50 1131 S.M.

27 27 Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring, treads of

steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 sand) 10 900.29 S.M.

finished with flush pointing in white cement etc.com. For all floors

28 28 Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of steps &

dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary

cement paste for fixing and joined with white cement slurry etc. complete. 10 932.02 S.M.

29 29 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand) finishing with flush pointing in white cement.

30 30 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps

and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand)

and jointed with white cement slurry

31 31 Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with flush

pointing in white or colour cement including rubbing and polishing 10 2,410.00 S.M.

complete. ( Basic Rate:- Rs.1347.46/S.M.)

32 32 Providing & laying granite slab 18mm thick in skirting, risers of

steps, dedo and pillars laid on 10mm thick cement mortar 1:4 (1

Cement : 4 Coarse sand) and finished with flush pointing in white or 10 2,449.00 S.M.

colour cement including rubbing & polishing comp.. (Basic Rate:-

33 33 Providing & laying granite slab 18mm thick in Window-Door seal Frame

Etc laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with

nessary adhesive material and finished with flush pointing in white or colour 10 2,026.00 S.M.

cement, including rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

34 33 A Labour Charges For Edge Finished For Granite 150 43.43 R.M.

35 35 Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell, Asian or Euro make in flooring,treads of

steps & Landing laid on bed of 20 mm (Average) base of cement

mortar 1:6 (1 Cement : 6 Coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing 10 1,467.72 S.M.

flooring and jointed with colour cement slurry including finished with

flush pointing & cleaning the surface etc. comp. Size 24" x 24"

For Antiskid tiles

36 36 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1

cement : 3 coarse sand) finishing with flush pointing in white cement.

37 37 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement :

coarse sand) and jointed with white cement slurry.

38 38,39 Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face

water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on

both side with adhesives as specified by the manufacturers. The laminate

shall be as per approved shade & texture, of make incl. Sal wood frames of 2 3,720.00 S.M.

finished size 12cm x 7cm.incl. S.S. Hinges with nessary screws &

Anodized aluminum fixtures & fastenings For all Floor

Same as Above But Without Frame 2 2,520.00 S.M.

DESCRIPTION Qty & M.R (W/O Unit Total

39 38,39 Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows

& clearstory windows incl. Indian teak wood frames of finished size 12cm

x 7cm.incl. anodized aluminum fixtures & fastenings incl. Primer coat

of approved quality & two coats of oil painting etc. For all Floor

(A) Fully Panelled 2 5,533.68 S.M.

(B) Partly Panelled and Partely Galzed 2 5,185.03 S.M.

(C) Fully Galzed 2 4,836.39 S.M.

40 40 Providing and fixing 35mm thick shutters for Doors, windows and

clearstory windows including anodised alluminium butt hinges with

necessary screws.

(A) Indian teak wood. (i) Fully Panelled.

41 42 Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP

shutter with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame

is to be filed up with injected polyurethene foam done in situ along with

embedded wooden pieces for stiffening & also taking hinges & fixtures. The

whole FRP frame & shutter is to be water proof weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be inclusive of S.S.hinges with

fastener sleeve & alluminium fixtures & fastentings.

42 43 Providing and fixing FRP of 35mm thick Fiber Glass shutter with 1.5 to

mm thick fire retardent grade FRP skin in depressed panel design having

extra reinforcement on sides & edges & in Gel coat finish. The core of the shutter

is to be filled up with injected retardent grade polyurethane foam done in situ

alongwith embedded wooden pieces for stiffening & also taking hinges & fintures.

The whole FRP frame & shutter is to be water proof,weather proof, termite proof 10.00 1,269.63 S.M.

& resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings.

43 44 Providing & fixing M.S.Grills of required pattern to wooden frames of

windows etc. At all floor levels with M.S. flats at required spacing &

frame around square or round bars with round headed bolts & round headed

bolts and nuts or by screws incl. Priming coat of Red lead paint etc. comp. (A) 2000 109.41 Kg.

Plain grill For all Floors

44 45 Providing & fixing in position collapsible steel shutters with vertical

channels 20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size

with top & bottom rails of T-iron 40x40x6mm. with 38mm dia. steel

pulleys comp. with bolts, locking arrangements, stoppers, handles incl. 50 6,158.35 S.M.

applying a priming coat of Redlead paint etc. comp.

45 46 NOTE :- (1) The whole work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma duly

stamped (2) The rate shall include for work at all floors & conducting

proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound

confirming to IS:2645 about 25 mm. th' in the floor of the depression & about

18mm th' On the side walls of the depression up to the floor level, water proofing

plaster about 18 mm. th' be continued on the walls above the floor level for a

height of 600 mm. with surface suitable to receive further treatment 0.00 296 S.M.

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement consumption

0.316 Bags / S.M.)

DESCRIPTION Qty & M.R (W/O Unit Total

(B) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs, balconies,

terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size

with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645 ,brick bats is finally

covered by jointless cement plaster 20mm th. in C.M. 1:4 added with special

water proofing compound confirming to IS:2645 & top smooth finished with

trowel with false chequered marking of 300 mm.size.The treatment is carried 100.00 511 S.M.

along the vertical surface of the parapet & other adjoining wall up to height of

about 300 mm in a shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to be down

in order and as directed and specified by the engineer-in-charge. With average

thickness of 120 mm and minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.)

46 47 Proiding & laying water proofing treatment to vertical and horizontal surfaces

like consisting of (a) I course of applying cement slurry 4.4 kg per sq.mt. mixed

with water proofing compound confirming to IS:2645 in rcommended proportions.

(b) II corse of 20mm cement plaster 1:3 mixed with water proofing compound in

recommended proportion (c) III course of applying blown or / resideal bitumen

applied hot at 1.7 kg per sqm of area. (d) IV course of 400mm micron th. PVC 0.00 505 S.M.

sheet. (Overlaps at joints of PVC sheet should be 200mm wide and pasted to each

other with bitumen about 1.7 kg./ sqm.)

47 48 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc.

48 49 Providing & fixing at all floor levels,both face polished machine cut edge

green kota stone slab (30mm) for urinal partition joined with grey

cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)

49 50 Providing & fixing at all floor levels,both face polished machine cut edge

Marble slab for urinal partition joined with grey/White cement slurry

(1:1) incl. Rubbing & polishing etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

B. WATER SUPPLY AND SANITARY ITEMS

50 51 Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all floor

levels, size 580mm incl. 100 mm size "P'or "S" trap for water closet squatting

pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1

fine sand) etc. Comp.(A) Vitreous china long pattern of approved colour For 2 1,471.41 No.

51 52 Providing and fixing Wash Down Water closet European type W.C. pan

with integral P or S trap including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 find sand) (seat and cover to be measured and 2 1,356.81 Each

paid for separately) (A) Viterous china pattern - I (i) in approved colour

52 53 Providing and fixing plastic seat and cover for wash down water closet with

C.P. brass hinges and rubber buffers (B) Plastic seat and cover. 3 291.33 Each

53 54 Providing & fixing wash basin with single hole for pillar tap at all floor levels,

with C.I. or M.S. Brackets painted white incl. cutting holes & making good the

same incl. fittings such as pillar tap, capstan head screw down high pressure

with screws, shanks & back nuts, C.P. Brass waste trap, screw down stop 3 2,132.94 No.

tap 15 mm. dia. etc. complete. (A) Vitreous china flat back wash basin

mm.x 400 mm. size in approved colour For all Floor

54 55 Providing & fixing Urinal or approved quality including conecting the Urinal

with waste pipe, tap etc. complete. (A) White earthenware flat back or corner

type size 430 mm x 260mm x 350mm

DESCRIPTION Qty & M.R (W/O Unit Total

55 56 Providing & fixing white vitreous china Ladies urinal of size 470x360X100

mm and 15mm dia. C.P. spreader, and pipe to wall complete including cutting

and making good the walls and floors wherever required. 1 2,316.05 Each

Make- Cera 4040101, Parry ware C0503, ,HindWare

56 57 Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all

floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to

wooden plugs with C.P.brass screws and washers etc. For all Floor

57 59 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5) chamber & water tight C.I. cover with frame of 300mmx300mm

size (inside) with weight includ. plastering smooth inside & outside

15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps--- 1 1,292.19 No.

(A) 100mm x 100mm Size -P type

(B) 150mm x 100mm Size- P Type 1 1,246.92 No.

58 58 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5)chamber & water tight Pre cast R.C.C. cover of 300mmx300mm

size (inside) includ. plastering smooth inside & outside 15mm. th' in C.M.1:3

etc. comp. (i) Square mouth traps---

(A) 300mm x 300mm Size -P type 1 1,098.48 No.

(B) 150mm x 100mm Size- P Type 1 1,052.77 No.

59 60 Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of

following nominal internal diameters incl. Testing of pipes and joints

60 61 Providing & Fixing C.P. Brass screw down bib tap at all floor levels, polished

bright etc. comp.-(A) 15mm dia. For all Floors

61 62 Providing & Fixing gun metal check or non return full way wheel valve at

all floors levels, etc. complete.

62 63 Providing & Fixing chromium plated brass half turn flush cock at all

floor levels, of approved quality incl. fixing in pipe line etc. Comp.-- 25 mm 2 263.77 No.

63 64 Providing & Fixing abonite ball cock of approved qualities directed etc.

comp. (A) 25 mm. dia.

64 65 Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size

having weight not less than 35 Kg. etc. complete.

65 66 Providing and fixing C.P. brass waste for washbasin or sink.

(A) 32mmdia. 2 67.91 Each

(B) 40mm dia. 2 89.83 Each

66 67 Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B")

of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste

discharge system at all floor levels incl. All fixtures like bends, tees, shoe etc.

jointed with resin of approved brand & manufacture etc. comp. (M.R.)

67 68 Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A")

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at

all floor levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. (M.R.)

68 69 Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings

make or equivalent as approved by angineer-in-charge. Pipe shall be fixed

on the wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of

DESCRIPTION Qty & M.R (W/O Unit Total

69 70 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make for water supply line at all floor levels incl.

fixtures like bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. Pipe shall be fixed on the wall the help of clamp at

every two meter C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. (Market Rate)

70 71 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm

diameter with jali of the following nominal diameter of self cleaning design

with C.I. scread down or hinged grating including the cost of cutting and 5 586.27 NO

making good the walls.

71 72 Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp. dia. (MR)

(B) 110 mm Dia. 5 50.00 NO

72 73 Providing & fixing M.S. Holder Bat clamps at all floor levels of

approved design to C.I. Or S.C.I pipes including the cost of cutting holes

& making good the wall etc. Complete - 100 mm. dia. (M.R.)

73 74 Providing & fixing G.I./Aluminum Patti clamps at all floor levels of

approved design to C.I. Or S.C.I pipes including the cost of cutting holes

& making good the wall etc. Complete - 100 mm. dia. (M.R.)

74 75 Providing erecting and fixing double coated Sintex/Super/Reno PVC

(ISI) mark water tank of required capacity each with all necessary

fittings & connection etc. complete on terrace.

75 76 Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness(CM 1:3 [1 cement :3 coarse

sand]) finishing as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 5.00 173 R.M.

(B) 100 mm /110 mm PVC PIPE 5.00 180 R.M.

C. ITEMS FOR COMPOUND WALL & OTHER MISC. ITEMS :-

76 77 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of

the surplus excavated soil as directed within a lead of 50 M. For

following diameter of piles.

77 78 Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone

agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu.

Cost of reinforcement for reinforced concrete work in : (A) Foundation, 10 3,741.00 C.M.

footing, Base of columns and Mass concrete.

78 79 Providing & laying ordinary cement con. 1:2:4 (1cement:2sand:

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

comp. Incld. Cost of form work but excl. Cost of reinforcement for R.C.C. Work

(1)Having c/s area up to 0.08s.mt 20 12,235.51 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5 10,658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 5 8,692.87 C.M.

(1)Having c/s area up to 0.08s.mt 20 8,593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5 7,665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 5 6,578.07 C.M.

DESCRIPTION Qty & M.R (W/O Unit Total

79 80 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg.

m.m Nominal size)& curing comp. incl. cost of from work in: wall caps/ 5 4,085.83 C.M.

80 81 Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection

plates or angle cleats as in main & cross beams,hip & trussed purlins

connected to common raffers & the like.

(B)For work like chain link fencing, above compound wall etc. 2 9,108.48 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height

81 82 Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick

with nuts, bolts, washer or G.I. pins, excluding M.S. angles etc.complete as per

relevent IS specification & directed by engineer in charge. 200 311.00 SM

(TATA or Jindal Make) (M.R.)

82 83 Providing and fixing and fitting TATA or Jindal make G.I. barbed wire

fencing with necessary barbed wire (12 x 14 guage, weight not less than

kg. / mt.) pins, hooks, excluding M.S. angles etc. complete as per relevent IS 500 125.00 Kg.

specification.& directed by engineer in charge. (M.R.)

83 84 Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses. (1) 0.80 mm thick sheet. 10 734.19 S.M.

(Tata / Jindal or equivalent)

84 85 Providing & fixing 150mm wide 450mm over all semicircular plain

G.I. sheet class-3 gutter with iron brackets 40mm x 3mm size bolts,

nuts, washers etc. including marking necessary connection with rain water 5.00 581.32 R.M.

(i) 0.8 mm thick

85 86 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I.

"J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer

complete (1) 0.80 mm thick

86 87 Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the

main cladding on both edges. All fixing holes must be predrilled oversize as

specified for the sheet length and fastener being used. Fasteners must be

fitted with approved washers. Fixings should be tightened to ensure a

weatherproof seal but they must not be over tightened Side-lap fasteners

must also be installed at specified centers with the FRP sheet having

clearance holes provided as per the main fasteners Weatherproofing shall be

provided at all flashing points under the normal flashing by the fitting of a

foam closure strip to match the profile being used. Closure strips will be

sealed to the sheet with an appropriate non setting silicone sealant.

Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick 10 992.00 SM

(b) 2 mm thick 10 1,100.00 SM

87 88 Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3

concrete also horizontaly in line and connecting to purline angle etc by

welding rereting etc. (a) Medium duty "B" Class

88 88 Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3

concrete also horizontaly in line and connecting to purline angle etc by

welding rereting etc. (a) Medium duty "B" Class

89 90 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners , stainless

steel bolts etc., of required size, on the top of the floor or the side of 10 450.00 Kg

waist slab with suitable arrangement as per approval of Engineer-incharge,

(for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

DESCRIPTION Qty & M.R (W/O Unit Total

90 91 Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP

/ PVC)at junction of brick work and RCC work or two dissimilar surfaces, at

all heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before 5.00 102 S.M.

applying the plaster, including curing, scaffolding all complete as directed.

91 92 Providing and filling Epoxy grout of approved or suggested brand

by consultant / Engineer in charge in 4mm to 6mm thick tiles joint

including spacer with cleaning of joint by vacuum or blower etc

92 93 Providing and fixing rebar of following diameter using chemical grout

of Swanchore/Hilti/Fischer or equivalent make including cost of all

equipments, tools, material, labour, etc. Standard procedure as

mentioned in manufacturer's specifications shall be strictly followed,

which shall be submitted and got approved from the authority prior to start

of work. The rate shall also include cost of drilling of hole of required

diameter and depth as mentioned in manufacturer's specification, cleaning

the hole with required air blower and other necessary tools and tackles,

positioning, providing and grouting chemical, allied fixtures and fasteners,

etc. but excluding the cost of reinforcing bar etc. complete. Item includes

necessary scaffolding, staging, labour, tools and equipments, etc. complete

as directed by the engineer-in- charge. (MR)

93 94 Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with ISI specification. Using Chlordene and

Chiorpurfiles 20 EC. As per 6131_paret-II Consentration Weight one

percent is recommended i.e. one litre 20 EC chemical emulsion with 19 10 87.03 Smt.

liter give 1% concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 litre chemical / Sqm of surface is recommended as

94 95,96 Providing and fixing rolling shutters of approved make made of 80 mm wide

M.S. laths inter locked together through their entire lenght and jointed

together at the ends by end locks mounted on specially designed pipe

shaft with bracket plates, guide channels and arrangements for inside 10 3554.40 Smt.

and outside locking with push-pull operation including the cost of hood

cover and spring etc. complete (A) Shutters having width below 3.5 M.

95 95,96 Providing and fixing rolling shutters of approved make made of 80 mm wide

M.S. laths inter locked together through their entire lenght and jointed

together at the ends by end locks mounted on specially designed pipe

shaft with bracket plates, guide channels and arrangements for inside and

outside locking with push-pull operation including the cost of hood cover 2 4,546.01 Smt.

and spring etc. complete.

(B) Shutters having width 3.5 M and above

96 97 Providing and laying broken china mosaic flooring for terrace using 12mm

to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions and extending 10 779.70 Sqm.

them upto 15 cm along the wall clearing with water and oxalic acid etc. as

97 98 Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar

1:1 including neat cement finishing, watering etc. complete. 100 24.28 Rmt.

98 99 Providing and fixing hot dip concertina coil of 610mm dia made out of

2.59mm (12SWG) hot dip galvanised (G.I coating not less than 200 grams per

sqm) thick wire having 80 nos of spikes and 200 nosof clips made out of

stainless steel (AISI 304)1.5mm thick dia, G.I. strips 0.5mm thickness (G.I.

coating not less than 120 gms per sqm) weight of one coil should not be less 300 314.00 Rmt.

than 15kg. etc complete at the top of the compound wall fixed with S.S. clips

and binding wires wherever necessary etc complete. (NOTE : streching length

of one coil should not be more than 9 meter)

DESCRIPTION Qty & M.R (W/O Unit Total

Hoarding Printing and Mounting

99 100 Hoarding Printing and Mounting 5.00 16.50 Sft.

100 101 Flex Banner (Any size 240 gsm) 5.00 8.50 Sft.

101 102 Flex Banner with MS (Mild Steel) framing (Any size 240 gsm (Pipe size 25 x

102 103 Cloth Banner (Upto 8 x 4 feet 140 gsm) 5.00 23.60 Sft.

103 104 Cloth Banner with MS (Mild Steel) framing (Up to 8 x 4 feet 140 gsm) (Pipe

size 25 x 25 x 1.5 mm)

104 105 Cloth Banner with Wooden stick at both end for rally display (Any size

105 106 Cloth banner standee (Any size 140 gsm Pipe size 25 x 25 x 1.5 mm)

106 107 Wall Vinyl Sticker 5.00 28.00 Sft.

107 108 Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 5.00 38.00 Sft.

108 109 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 5.00 22.00 Sft.

109 110 5mm PVC sheet Eco Vinyl (Any size) 5.00 55.46 Sft.

110 111 Decorative theme base designing & painting with all waterproof materials

D. Colour Works :-

111 112 White Washing with lime on wall surface to give an even shade & surface

incl. throughly brooming the surface to remove dirt, dust mortar drops &

losse scales of lime wash & other foreign matter Two coats.

(A) walls 10.00 13.03 S.M.

(B) Ceiling 10.00 14.21 S.M.

---do Extra Subsequant coat over above Item

(A) walls 10.00 6.01 S.M.

(B) Ceiling 10.00 6.51 S.M.

112 113 Colour washing with lime on wall over & incl. a primary coat of white

washing to give an even shade & surface incl. throughly brooming the surface

to remove all dirt, dust mortar drops & loose scales of lime wash & other

foreign matter.Two coats.

(A) walls 10.00 13.03 S.M.

(B) Ceiling 10.00 15.37 S.M.

---do Extra Subsequant coat over above Item

(A) walls 10.00 8.35 S.M.

(B) Ceiling 10.00 10.53 S.M.

113 114 Distempering two coats with oil bound washable distemper of

approved brand & manufacture & of required shade on wall surface to

give an even shade over and & including a priming coat of alkali

resistance primer of approved brand after throughly brushing the surface to

give an even shade after throughly brushing the surface free from mortar

droppings and other foreign matter and also including preparing the surface

even and smooth.

(B) Ceiling 250.00 84.37 S.M.

---do Extra Subsequant coat over above Item

(A) walls 0.00 31.91 S.M.

(B) Ceiling 0.00 35.23 S.M.

114 115 Apply two coats of putty and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other matter 100 40.59 S.M.

and sand papered smooth.

115 116 Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

116 117 Distempering two coats on previously distempering wall (without

primer) with oil bound washable distemper of approved brand & required

shade on wall surface to give an even shade after throughly brushing the

surfaces clean of all grease, dirt loose places of sceles & also including 250.00 60.63 S.M.

preparing the surface even and smooth.

DESCRIPTION Qty & M.R (W/O Unit Total

117 118 Applying Priming coat over new steel and other metal surface after over

and including preparing the surface by throughly cleaning oil, grease dirt and

other foreign matter and scoured with brushed fine steel wool, scrapers and

sand paper with ready mixed priming 50.00 36.74 S.M.

paint brushing red lead.

118 119 Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar 100 83.36 S.M.

droppings and other foreign matter and sand papered smooth.

For every subsequent coat Extra over item no.above 100 33.72 S.M.

119 120 Painting one coat (excluding priming coat) on Previously Painted steel

and other metal surface with synthetic enemal paint, burshing to give

an even shade including cleaning the surface of all dirt, dust and other

foreign matters.

For every subsequent coat Extra over item no.above 10.00 40.09 S.M.

120 121 Providing & applying two coats of weather shield max paint (3 coats may

be required in case of darker colours.)of ICI Dulux or Apex Ultima of

Asian Paint including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as directed by

the architects and manufacturers. (MR)

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease,

fungi, algae and flaking paint. This can be achieved by brushing with a wire/

stiff coir brush, followed by water jetting if required. Fill up all minor

cracks and defects with white cement and sand mixture in the ratio 1:3. For 1000 82.00 S.M.

application on previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly using wire

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5

hours. Application of putty is not recommended. Minimum 4-6 hours

duration is required between each coat of weather shield max paint

121 122 Writing letter or figures on any surface with black japan paint (stops,comas,

hyphens and the like not to be measured and paid for separately)(i) Block Per Letter

(Letters/Figures) (Per 10 Letter pet CM.HT) 10.00 3.18

122 123 Writing letter or figures on any surface with black japan paint (stops,comas,

hyphens and the like not to be measured and paid for separately) (ii) Indian Per Letter

(Letters/Figures) Per Cm/Ht

123 124 Taking photographs of work in progress and submit with each RA bill.

Photographs shall cover details of locations of the activity of work in

progress. The Contractor shall submit photographs with Album in a set

comprising 2 (two) copies (size of photograph is 4" x 6") and a soft copy of 100.00 26.79 Set

the same. Work shall be carried out as per the instruction of the Engineer-in-

E. Aluminium Works :-

124 125 Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 95 mm x 24 mm x 1.17 mm (of jindal

section no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track member size

92 mm x 31.75 mm x 1.30 mm (of jindal section no;8688, @ Wt.

Kg/mt), vertical member of size 92 mm x 31.75 mm x 1.50 mm (of jindal

section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

member size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of 5 1,591.87

0.456 kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminium fittings & fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 5 1,591.87 S.M.

DESCRIPTION Qty & M.R (W/O Unit Total

125 126 Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of Jindal

section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track member size

61.85 mm x 31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt.

Kg/mt.) vertical member of size 61.85 mm x 31.75 mm x 130 mm (of

jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding shutters of

horizontal member size 40 mm x18 mm x 1.29 mm ( of jindal section

no:8949, @ Wt. of .456 Kg/mt) vertical member of size 40 mm x 18 mm x 5 1,705.67

1.29 mm (of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @

Wt. of 0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc. complete

(A) Same as above but Colour anodized 5 1,705.67 S.M.

126 127 Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated

alluminium frame for ventilation with 5 mm thick frosted glass as details etc 5 1,175.56 S.M.

complete for Ventilation. (MR)

(A) Same as above but Colour anodized 5 1,175.56 S.M.

127 128 Providing and fixing standared extruded of aluminium section of size 61 x

37.0 x0.90 mm (of Jindal section no.14080, @ Wt. 0.471 Kg per mt) with

Powder Coated alluminium frame with 5 mm thick transparent bronze 5 1,833.29 S.M.

colour tinted float glass as details etc. complete for fix window. (MR)

(A) Same as above but Colour anodized 5 1,833.29 S.M.

128 129 Providing & fixing partly panel & partly glass Powder Coated Aluminium

doors with aluminium section of Hindalco, Jindal , Narmada,Banco or

Equivalent approved make having Poder Coated outer frame Leg

Partition section of 63.50 mm x 38.10 mm having weight 1.158 kg. / R.M.

shutter section having size 83.5 mm x 44.45mm ( top & bottom:

kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm (

vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal 5 3,237.00 S.M.

Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid

frogting and 12 mm thick prelaminated sheet of Greenlam, Panama or archid

make as approved by Engineer-in charge including fixing brass pivot, handle,

lock etc. complete. (MR)

(A) Same as above but Colour anodized 5 3,237.00 S.M.

F. Sanitary Items :-

129 1 Providing & fixing C.P. brass pillar cock with copper connection, C.P. brass

screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat. No.:

F650003, Jaquar FLR-5011N

130 3 Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.: F530004,

Jaquar FLR-5041N

131 5 Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with

C.P. copper connecting pipe 450 mm long and nuts, washer and brass flange

complete, including cutting and making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.: F440020

F850094, jaquar CON 053 KN

132 9 Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989 ,HindWare Cat.

133 10 Providing and fixing Towel Ring fabricated from seamless stainless steel

tube 2mm thick in bath room with polished wall flange at end of bars with

heavy duty anchor fasteners & accessories.

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN- 1121N

,HindWare F880007

DESCRIPTION Qty & M.R (W/O Unit Total

134 11 Providing & fixing S.S.towel rail of 600 mm long approved make including,

providing & fixing C.P. brass screws, making holes in walls & making good.

Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM

,HindWare F880005T

135 12 Providing & Fixing stainless steel recessed type Soap dish of approved make.

Including providing & fixing screws, washers, cutting & making good the

walls. 0 793.00 NO.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N

,HindWare F880011

136 136 Providing Metropole Flush Valve Dual Flow 40mm Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ,

HindWare F860075

137 19 Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-5347N, 0 1722.00 NO.

HindWare F650013

G. DEMOLITION WORKS

138 138 Demolition including stacking of serviceable materials with all lead and lift.

139 139 Demolition of brick work and stone masonry including stacking of

serviceable materials and disposal of unserviceable materials with all lead 10 577.92 C.M.

and lift. (i) On Cement Mortar.

140 140 Removing and scraping of old deteriorated plaster of any thickness from wall

/ RCC member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift.

141 141 Dismentling steel work including distempering and stacking the materials

with all lead and lift.

142 Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys, Gutters etc.

stacking of serviceable materials and disposal of unserviceable materials with

all lead and lift.

(i) G.I. sheet roofing.

143 142 Dismentling door, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraces, holdfasts and other attacement etc.

complete and stacking them within all lead and lift. 5 197.09 EACH

(i) Not exceeding 3 Sq.M. in area.

144 143 Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys, Gutters etc.

stacking of serviceable materials and disposal of unserviceable materials with 5 50.11 S.M.

all lead and lift. (i) G.I. sheet roofing.

145 144 Dismentaling tiled of stone floors laid in mortar including stacking of

serviceable materilas and disposal of

unserviceable materials with all lead and lift.

A A. Kota stone flooring and steps 5 50.11 S.M.

B B. Marble 5 50.11 S.M.

C C. Tiles flooring / Dedo 5 50.11 S.M.

D D. Granite flooring and steps 5 50.11 S.M.

146 145 Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with fittings and

clamps including stacking the materials with all lead and lift. (for any dia, of

GI pipe (15mm) 0.00 78.51 Rmt.

GI pipe (25 mm) 0.00 78.51 Rmt.

GI pipe (32 mm) 0.00 78.51 Rmt.

GI pipe (40 mm) 0.00 78.51 Rmt.

GI pipe (50 mm) 0.00 78.51 Rmt.

UPVC pipe 0.00 78.51 Rmt.

147 146 Dismentling wood work, wrought framed and fixed in frames trusses

including stacking the materials with all lead and lift.

148 147 Dismentling barbed wire in fencing including making rolls and also including

dismentling fencing posts including all earth work concrete in base and

making good the disturbed fround stacking useful materials as directed and 5.00 70.15 Rmt.

disposing as directed and disposing of the unserviceable materials with all

E. ITEMS FOR GROUND DEVELOPMENT WORKS

149 148 Box Cutting the road surface to proper slope and camber for making base

includinng removing the excavated stuff and depositing on the road side 10.00 109.41 C.M.

slope as directed up to 50 mt. lead.

DESCRIPTION Qty & M.R (W/O Unit Total

150 149 Preparation of subgrade with Compacting, Levelling and consolidation of

subgrade with miniroller /plate vibrator machine including watering and

filling in depressions which occur during the process as directed by engineer

151 150 Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering,

ramming & consolidation etc. complete.

152 151 Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm

compacted thickness over the base including necessary compaction, watering

etc. complete. Item includes leveling by using vibratory plates compacted 10.00 1016.00 C.M.

machine and as directed by engineer in charge.

153 152 Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm

x 380mm) purchased from SMC's approved paverblock manufacturer &

setting in line, level and in truly vertical position, including filling joints in

C.M. 1:1 (1 part of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 50 228.00 R.M.

(1 part of cement : 1 part of coarse sand) including watering etc. complete

and as directed by engineer in charge. (MR)

154 153 Providing interlocking type Rubber moulded cement concrete paver block

of approved shape, design & colour having 60mm thickness (M-35)

purchased from SMC's approved paverblock manufacturer only & fixing of

fine sand bedding. Item includes levelling by using vibratory plates

compacted machine. Item also includes all materials, labour, equipments,

tools, plants, watering, cleaning etc. complete. (MR)

With colour 50 524.00 S.M.

Without colour 50 524.00 S.M.

155 154 Providing & laying Granular sub base (GSB) confirming to Grading-V of

Table 400.0 of compacted thick of 150mm with specified graded stone metal

and sand mixed in place and laid with mechanical means spreading with

motor grader and compacting with vibratory roller having minimum 80-

100 KN static weight to acheve desired density of 98% of MDD including 50 1,469.00 C.M.

all material, labour, machinery with all leads and lift etc. complete.

156 155 Providing and Replace door, Window S.S. Fixtures fix in wooden /

Alluminium door - window

(A) S.S. Stopper 60 Cm long of ASIS 304 1.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 1.00 182.32 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 1.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 1.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 1.00 327.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 1.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS 304 Grade

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 1.00 76.17 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 1.00 873.05 No.

(J) Inter Lock [Kadaka lock] 1.00 209.71 No.

(H) Locks Godrej Mortice lock cover 1.00 329.63 No.

(I) Door closers arrow type with spring 12 length as approved sample

(J)Handle for doors Windows Cupboards etc. Brass 15 cms. Length

(K) S.S. Door / window hinges 4"x1"x1" 1.00 54.78 No.

157 156 Providing & fixing water proof plywood (ISI marks 710 grade) at the

door,window and any space in the building. necessary hardware,screws

materials etc. complete as per instruction by engineer in charge.

158 157 Removing & resetting existing readymade c.c. kerb stone of required size &

thickness in line .level and in truly vertical position including filling joints in

C.M. 1:1 (1 part of cement : 1 part of stone dust) smooth pointing in C.M. 1:1

(1 part of cement : 1 part of coarse sand) including watering etc. complete 50.00 56.00 R.M.

and as directed by engineer in charge. (M.R)

159 158 Removing and Resetting of Paver block of walk-way with necessary sand /

pana filling and make in line and level with necessary vibrating using 350.00 102.00 S.M.

compactor machine.

DESCRIPTION Qty & M.R (W/O Unit Total

160 159 Providing, Suppling and fixing of FRP Moulded Grating of approved make

over drain channel etc.Work Complete as per instructions of the Engneer-in- 100.00 5172.00 S.M.

charge. (AS PER MARKET RATE)

161 160 Providing and fixing with wooden battens Netlon-type PVC net to the sides of

skylight including Indian Teak wood frame of 75 mm x 35 mm using wooden

battens of required size including one coat of primer and two coats of 0.00 745.38 S.M.

approved enamel paint as directed by the Engineer-in-charge.

162 161 Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20mm nominal size) laid in one layer

finished with a floating coat of neat cement (A) 50 mm thick - IPS at Sump &

Hydraulice Engineer

Surat Municipal Corporation