SR to Conservation of Anjengo Fort, Anjengo, Trivandrum, Kerala 2023-24, Archaeological Survey of India, Thrissur Circle

Anjengo Fort, Anjengo

Erecting and dismantling scaffolding for conservation work with proper fittings and fixtures without disturbing the parts of monument and maintaining proper offset from monument including cost of all labour charges and hire charges as per the direction of work in charge etc. complete.

De-plastering of damaged and worn out Lime plastering manually and cleaning the surface properly using brush and throwing away debris including cost of all labour charges and hire charges etc. complete.

Re-plastering the wall with properly grinded Lime mortar 1:1:1 to an average thickness of 25mm including proper curing, cost of all labour charges, materials and hire charges etc. complete.

Finishing coat of plastering with Lime mortar 1:1:1 over the base coat to an average thickness of 10 to 15 mm including cost of all labour charges, materials and hire charges etc. complete.

Supply,installation and commissioning of one 35 LPH or above ISI approved/reputed Reverse Osmosis plant water purifier including cost of plumbing, electrical charges etc. of approved make as per the direction of site in charge.

Making and supplying of best quality wooden gates with good quality teakwood frames and pickets as per approved drawing including cutting, planning, welding, necessary fixtures, hinges, al drop, applying two coats enamel paint over a coat of primer as per the direction of work in-charge (Drawing enclosed).

Carefully removing laterite stones from the rampart wall at South west side of the monument and relaying on top of re-erected wooden beam in brick jelly lime concrete including pointing and plastering in lime mortar 1:1:1 and including cost of all labour charges, materials etc. complete.

Replacing two Nos. damaged wooden beam of average size (4.70 m x 0.20 m x 0.20 m) below the rampart wall at South west side of the monument by removing the dilapidated wooden beam and including cost of all labour charges, materials and etc. complete.

Providing additional layer of laterite stone masonry wall to the worn out/damaged foundation of compound wall with laterite stone of size 30x20x20 cm in lime mortar 1:1:1 including earthwork excavation, concreting, pointing, cost of labour charges, materials etc. complete.

Careful removal of the existing damaged laterite masonry adjacent to the well in the inner side of the fort and disposal of materials away from site as per the direction of site in charge.

Providing PCC of ratio 1:4:8, with minimum thickness 100 mm for foundation and flooring of as per the approved drawing including the cost of any centring and shuttering, cost of all labour charges, materials etc. complete.

Providing Laterite masonry work to the foundation of pump room in cement mortar 1:5 using Laterite stone of size 30x20x20 cm etc., complete as per approved drawing and including cost of all labour charges, materials etc. complete.

Earth work excavation by manual means including getting out and disposal of excavated earth out of the site as directed by site in charge including cost of labour charges etc. complete.

Providing new Laterite stone flooring at South side and South east side using Laterite stone of size 30x20x20 cm in lime mortar 1:1:1 including all excavation, levelling, compacting including cost of all labour charges, materials etc. complete.

Providing RCC Lintel slab of 170 mm thickness and sunshade using cement concrete 1:2:4 excluding centring and shuttering, finishing and including cost of all labour charges materials etc. complete (Reinforcement included).

Providing Laterite stone masonry wall using laterite stone of size 30x20x20 cm in cement mortar 1:6 as per the approved drawing including any necessary scaffolding cost of all labour charges, materials etc. complete.

Providing centring and shuttering for lintel beam, sunshade and RCC roof slab including strutting, propping etc. and including cost of all labour, materials, hire charges of tools and plants etc. complete.

Providing RCC roof slab of thickness 130mm using cement concrete ratio 1:2:4 including reinforcement and excluding centring, shuttering, finishing curing etc. complete.

Pointing in cement mortar 1:4 to the exterior and interior walls, columns of the structure including necessary scaffolding as per the instruction of site in charge including cost of materials, labour charges etc. complete.

Providing 12 mm Cement plaster of cement mortar 1:4 mix to the interior and exterior walls, columns, roof slab of the structure with neat finish including scaffolding, cost of all labour charges, materials etc. complete.

Painting two or more coats with Epoxy paint of approved brand and manufacture to give an even shade including applying appropriate priming coat, preparation of surface including cost of materials, labour charges etc. complete.

Providing and laying vitrified floor tiles of size 500x500 mm with water absorption less than 0.08 % and conforming to IS:15622, of approved make, laid on 20mm thick cement mortar 1:4,jointing in grey cement slurry @ 3.3 kg/sq m including grouting the joints with white cement and matching pigment including cost of materials, labour charges etc. complete.

Providing parapet wall and partition wall in brick masonry (brick size 22.5x11x7 cm) using cement mortar 1:5 as per approved drawing and including cost of all labour charges, materials etc. complete.

Providing MS frame work for placing MP tiles to the roof in front of feeding room using wall plate of size 3''X3'' and thickness 5mm, 3''X1'' Rafters and purling of size 2''X1" and thickness 5 mm including providing Eaves board, 6'' Upvc Rainwater gutter as per drawing including all fixtures and fitting and including cost of all labour charges cost of all materials and hire charges of tools and plants etc. complete.

Laying MP tiles of size 420X250 mm over MS frame and reapers in proper position etc. including necessary scaffoldings and including cost of all labour charges, materials, hire charges of tools and plants etc. complete.

Providing Aluminium roofing with Aluminium Trafford sheet of thickness 1.2 -1.5 mm of approved colour over Aluminium frame work of size 4''X 1 3/4 '' rafters and purlin of size 2 1/2'' X1 1/2'' including all fixtures and fittings etc. complete.

Providing MS grill of frame size 25x25x6mm MS Square tube and 12 mm MS square rod of 3 inch spacing as per approved drawing including all fabrication, fixing, fitting, hinges, aldrop with lock etc. complete

Making, supplying and fixing HDHMR door of 25 mm thick along with frames made out of Jack wood/Irul/Anjili frames of size 4''x2 1/2'' including fitting,fixing and cost of fixtures etc., complete.

Making, supplying and fixing of glazed window along with frames of size 4''x2 1/2'' made out of Jack wood/Irul/Anjili,stile of size 3''x1'', SS grill of 10 mm thickness, glass panel of thickness 2.2 mm ,including fitting, fixing and cost of fixtures etc., complete as per approved drawing.

Making, supplying and fixing of ventilator along with frames of size 4''x21/2'' made out of Jackwood /Irul /Anjili, stile of size 3''x1'', SS grill of 10 mm thickness, frost glass panel of thickness 2.2mm including all fitting, fixing and cost of all fixtures etc. complete as per the approved drawing.

Rajendran Contractor

SREEKANTON R