Supply of PVC Pipes, Screen filter,Solar panel, Submersible pump set for hybrid (Solar and Electric) irrigation system

Amount

Items

PVC ribbed screen filter of 80 mm diaamd 3.0 m length as per IS 12818-2010

Casing pipes of 80 mm dia and 3.0 m length (6 kgf/cm²) as per IS 12818- 1997

Casing pipes of 100 mm dia and 3.0 m length (6 kgf/cm²) as per IS 12818- 1997

MS/ GI Bail plug of 80 mm

PVC Reducer 100mm x 80 mm

MS/ GI well cap of 80mm dia

Polythene pipe of 50 mm dia and 100 m long

2 kw solar panel with support structure consisting of 6 nos. of solar panel (72 Cell) of 335 Kwp each, with necessary MC4 Connector, DC Junction Box and AC Junction Box connection. Indigenously produces PV module (s) containing mono/ multi crystalline silicon solar cells should be used in the PV array for the SPV Water Pumping Systems 1) Modules supplied with the SPV water pumping systems should have certified as per IEC 61215 specifications or equivalent National or International / Standards. 2) Modules must qualify to IEC 63730 part I and II for Safety qualification testing. 3) The efficiency of the PV modules should be minimum 14% and fill factor should be more than 70% 4) The terminal box on the module should have a provision for “Opening” for replacing the cable, if required. 5) There should be a Name Plate fixed inside the module which will give: a) Name of the Manufacturer or Distinctive Logo b) Model Number c) Serial Number d) Year of Manufacturer 6) The offered module shall be in accordance with the requirements of MNRE. 7) PV module must be warranted for output wattage , which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Mounting Structures and Tracking Systems : The PV modules should be mounted on metallic structures of adequate strength and appropriate design, which can withstand load of modules and high wind velocities upto 150 km per hour. The support structure used in the pumping system should be hot dip galvanized iron with minimum 80 micron thickness. To enhance the performance of SPV water pumping systems, manual or passive or auto tracking system must be used. For manual tracking, arrangement for seasonal tilt angle adjustment and three times manual tracking in a day should beprovided.

2 HP solar submersible pump sets along with converter and controller, add on for dual drive, all necessary cables in complete with discharge 90 liters of water per watt peak of PV array,total dynamic head of 10m and shut off head being at least 12 m. The following details should be marked indelibly on the motor pump set: i) Name of the Manufacturer or Distinctive Logo. ii) Model Number iii) Serial Number The suction/ delivery pipe (GI/HDPE), electric cables, floating assembly civil work and other fittings required to install the Motor Pump set. Submersible cable should be 3 core copper, 5 sq mm flat as per ISI standards of required length.

PHOTONICS WATERTECH PRIVATE LIMITED

AARK DIGITAL PRIVATE LIMITED

A ONE POLYPIPES AND FITTINGS PRIVATE LIMITED

M/S ELECTRO PLUS