CONSTRUCTION OF FURNISHING AND OTHER DEVELOPMENT WORKS AT HARI SINGH THAPA SPORTS COLLEGE LELU, PITHORAGARH DISTRICT PITHORAGARH

Amount

Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1

Gravel/Soil-Aggregate Base (Table 400.2) Grading A Construction of gravel/soil-aggregate base by providing well graded material,spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller to achieve the desired density, complete as per Technical Specifications Clause 402

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (For height upto 5 m) P.C.C. grade M 20 Nominal mix (1:2:4)

Cement Concrete (PCC M-30) Pavement:- Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M30, coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications.

Metal Beam Crash Barrier Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811)

Retro-Reflective Traffic Signs with Type IV retro- reflective Sheet Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 3mm/4mm thick Aluminium composite material sheet vide clause 801.3, depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel a mild steel circular pipe 65 NB, 3.2 mm thickness, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67.600 mm equilateral triangle

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 6 mm thick Cement fiber board as per IS: 14862

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 2.1.1 All kinds of soil

Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Providing and Laying of Interlocking Concrete Block (M-35) Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504.

Excavation in foundation for retaining, breast walls etc, inall types of soils and rocks including all lead, lift and disposal of surplus material asper direction of engineer- in- charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction

Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work

Supply & Installation of Carpet for M.P.H Steps Fireproof including making connection etc as required.

OFFICE CHAIR Supply and Fixing of High Back Chair, PU Adjustable Arm, Gas Lift, Nylon Base, Mesh Back & Seat Fabric Tapestry, Synchro Tilt, EDGE 1 complete as per disrection of engineer incharge

OFFICE CHAIR Supply and Fixing of High Back Chair, PU Adjustable Arm, Gas Lift, Nylon Base, Mesh Back & Seat Fabric Tapestry, Synchro Tilt, EDGE 2 complete as per disrection of engineer incharge

CHAIR Supply and Fixing of 1 Seater Sofa, Aluminium Arm And Leg, Powder Coated Cross Beam, Metal Insert PU Seat Back Size in mm - 550(L) X 660(D) X 870(H) 1 Seater With 2 Arm complete as per disrection of engineer incharge

EXECUTIVE TABLE Supply and Fixing of Executive Table, Particle Board Top, RAVE 1, W1800 X D1750 X H750 complete as per disrection of engineer incharge

EXECUTIVE TABLE Supply and Fixing of Executive Table, Particle Board Top,NUMERO 2, W1500 X D700 X H750 complete as per disrection of engineer incharge

WORKSTATION TABLE Supply and Fixing of geeken Modular Work Stations with Double Seater Rectangular shape Cluster with Side By Side sitting geekenR (MAX 2, W2580 x D660 x H1200, 2 Seater, Geeken) complete as per disrection of engineer incharge

TABLE Supply and Fixing of Study Table, Particle Board Top, MS Powder Coated Legs W1200 X D600 X H750 complete as per disrection of engineer incharge

CONFERENCE TABLE Supply and Fixing of geeken 10 seaters Meeting Table geekenR (CONFERENCE TABLE 3600X1200X750) complete as per disrection of engineer incharge

STORAGE UNIT Supply and Fixing of Back Storage Unit, 18mm PLPB, Extruded Aluminium Profile, EVOKE 4, W2250 X D450 X H2200 complete as per disrection of engineer incharge

STORAGE UNIT Supply and Fixing of Wooden Storage, Particle Board Structure W 900 X D 450 X H 2100 complete as per disrection of engineer incharge

LOCKER Supply and Fixing of Geeken Steel Clothes 18 - Locker type geekenR (GMS 27 20 COMPARTMENT LOCKER) complete as per disrection of engineer incharge

CURTAIN ROD COMPLETE Supply and Fixing of Woods Interiors Stainless Steel 304 Curtain Pipe, Sider and mounting bracket, Length 1 Meter Woods InteriorsR (Woods Interiors (2022-23)) complete as per disrection of engineer incharge

CURTAINS Supply and Fixing of Reliable Drapes Cotton Plain Door Curtains Reliable DrapesR (Reliable Drapes Cotton_Country_06_iv) complete as per disrection of engineer incharge

Providing & fixing of TIP- UP Stadium Chair for normal seating, AutoTip feature, HDPEB owmouded plastic Chair, Aluminium Stand with Silver Powder Coated, UV Resisted, Seat numbeing will be provided for easy traceability,Rain water easily drainout due to tipup PPCP Armrest will be provided, 1 year warranty for UV resisted & any manufacturing defects. (Wipro/Eurocoustic / Unique make)

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. Rocky strata including Boulders 400 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia having minimum wall thickness 5.40 mm

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:150 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work: 25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work: 32 mm dia nominal bore

Supply & Installation of Foot Light with colour temp 4000K complete with driver circuit including making connection etc as required.

Supply & Installation commissioning Eight stage Submersible pump-set Crompton Greaves make or equivalent) model H6W8R1D75T with (7.5 HP ,5.50 KW) motor size 150 , pump size 150 mm and Head Range not less than 52- 84 Mtrs. Discharge LPM 245 suitable to operate on 415± , 10% Volts, 3 Phase,50 c/s a.c supply complete.

HINDOTECH 7.5 HP Starters Control Panel for Submersible Pump

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 X 16 sq. mm

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.3.5 C X 25 Sq.mm Al. XLPE arm.

Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground Including Excavation, Sand Cushioning, Protective Covering and Refilling the Trench etc. as required.upto 35 sq. mm

Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required 3½ X 25 sq. mm (28mm).

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre

Supply, Installation, Testing and Commissioning of Hybrid 50 Watt/ 45 Watt Solar Street Light luminaire with 6 Mtr Octagonal Pole & inbuilt SCC made IP65 & with MPPT (Maximum Power Point Tracking) which provides about 25% more charging efficiency by utilizing maximum energy harvested by solar PV modules. System should designed to withstand highly corrosive atmosphere and heavy wind loads. The modules are certified for industry standards IEC61215, IEC61730 (safety class 1 & 11), IEC61701 along with 6 Mtr. octagonal pole with 100 AH lead acid battery & 125 Wp solar panel Total lumen output should not less than 3100 lumen Complete with all Accessories & Control Gears etc. (Make of PHILIPS CAT NO. BRP111LED50/757/ Similar to Havells SOLAR AIO 40W/ Similar to BAJAJ BSZSL50WALL-IN-ONE WITH HYBRID)

Supply, Installation, Testing and Commissioning of 200x160x70 Polycarbonate thermoplastics enclosure - junction box with I.P - 66 Protection

Supplying of ADP Octagonal Pole Single Arm 6 m ADP, Material of Octagonal pole : Grade ISH430LA as perIS:5986:2017 latest, Base plate material : Grade: E250, Quality:BR(as per IS:2062:2011 latest)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 core 2.5 sq.mm (for 6 Mtr Poles)

Weatherised Speaker : 1 x 15" LF; All-Weather Compact 2-Way Coaxial Loudspeaker with Power rating 300W Continuous at 8 Ohms; Coverage 90° x 90°; etc.

Weatherised Speaker : 1 x 15" LF; All-Weather Compact 2-Way Coaxial Loudspeaker with Power rating 300W Continuous at 8 Ohms; Coverage 90° x 90°; etc.

Line array column Loudspeaker : Constant Beamwidth Technology™ Two- Way Line Array Column with 4 x5" LF Drivers; 16 x1" HF Drivers; etc.

Digital Power Amplifier : DCi Series, Network Based Multichannel Digital Power Amplifier with 8 x 600W; built-in DSP and BLULink Support; etc.

Digital Signal Processor : 12x8 Signal Processor with BLU link, 12 Analog Inputs (with 48v Phantom Power per Channel), 8 Analog Outputs, Configurable Signal Processing, Rich Palette of Processing and Logic Objects, 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus, Clear Front Panel LED Indication, Bi-Directional Locate Functionality, 12 Control Inputs and 6 Logic Outputs for GPIO Integration.

Wall Mount Controller :Ethernet Controller with 8 Buttons and Volume Control, Compatible with BSS Audio Soundweb London, Crown DCi, and other HiQnet devices, PoE (Power Over Ethernet),Configured within Audio Architect via Drag-and-Drop, 1 Programmable Push/Rotary Encoder, 1 Programmable Encoder Ring (Multicolored), 8 Programmable Buttons (Multicolored), 2 Programmable 64x128 Pixel LCDs (Multicolored).

Goosneck Microphone : Gooseneck cardioid microphone provides elite performance with a 45.7 cm cable and inline preamplifier for use in installed sound reinforcement or AV conferencing. It features Commshield RF Filtering to stop wireless device interference with base unit

Four-Channel Digital Wireless Receiver

Handheld Wireless Microphone Transmitter

Bodypack Transmitter

Cardioid Lavalier Microphone

Dual Docking Recharging Station

Rechargeable Lithium-Ion Battery

Coaxial Cable

Wall-Mounted Wideband Antenna

Side-Address Condenser Microphone

Vocal Microphone

Supply of P2.5 LED Video Wall Graphic Display system of the following configuration :- P2.5 LED Video Wall Configuration SMD 3-in-1 Pixel Pitch COS/COB/flip chip for human touch Protection based Indoor Direct View True Color LED Wall size 3.6M X 3.8 M or higher inclusive Pixel Density 64500 pixels/m2 OR Better Brightness 800 cd/m2 or more IP,PP-4 MM, tile size 640 X 480 MM Grade IP30 / IP50 module IP 65 Lifetime (Typical) ≥100,000 hrs Viewing AngleHorizontal160° Vertical 160 or better, Dimming Capability0-255 level Contrast Ratio*5000:1 or higher Refresh Rate*1920Hz or higher Color Processing*16 Bit or higher Colors*4.4 Trillion or higher of LED control Processor Contro lRS232 Can be Cascaded for Uniform ControlInputsAUDIO IN 1 x AUDIO INPUT PORTDVI IN 1 x DVI INPUT PORTOutputs OUTPUT (1 TO 4) 4 x LAN OUTPUT PORT/ FIBER OPTICDVI OUT 1 x DVI OUTPUT PORT Resolution SupportInput Resolution Support1920 x 1200,2048 x 1152,2560 x 960,& other user define resolutions (under 2.3 million pixels)Maximum Width Output 2048 pixelsMaximum Height Output 1200 pixelsPowerInput voltage (AC) AC 100-240 V– 50/60 HzRated power consumption 2.9 WOperating temperature -20°C– 60°COperating humidity 10% RH–90% RHDimensions video prosseser Inputs1X DVI, 1X HDMI, 2 X VGA, 1 X Composite Video, 1 x SDI/HD-SDI Input Resolution Full HD or better Output 2xDVI,1 XVGA ControlPanel/Knob RS232 Power100~240VACOperating Temperature5~40 Deg C Switching Seamless Switching, Fade in Fade Out Switching & Blend Switch Power Distribution Unit, Structure to mount in trolly solutions LED & I&C (1 Nos.)Power Distribution Unit ,Power Distribution UnitA Power Distribution Unit to be provided to provide power to the LED walls.Cable pointsCable entry and exit points should be providedSurge protectionClass C MaterialDie-cast Aluminum Power Redundancy(Optional)SupportWith all video processor,Led controller,LED and installation should be a same OEM. 7.1 OEM should have their own registered office in India from the last 15 years on the date of bid submission. OEM of LED Display should have at least 150 cr. turnover in India in last financial year. OEM shall be ISO 9001, ISO 14001, OHSAS 45001 & ISO 27001:1 certified NABL with MII – Certificates to be submit. OEM should have their own service center across India for support. Franchised or Authorized service center are not acceptable Service centers should be available in all major metro cities with their own engineer at each location. GST registration number for all these service centers. Installation, Commissioning, after Sales support shall be provided by OEM only. OEM of the offered Active LED indoor screen should have experience of supplying minimum 15 same product Active LED

LED Video Wall Controlar and Switching ,HDMI and Data Cable

Fire Exit LED Display

Supply and laying of Two Core Shielded Speaker Cable with Conduit/ Casing ./ Cable Tray.

Supply and laying of Microphone Cable

Connectors - Audio, Video, Control and all necessary cables and connectors to execute the job

Installation, Testing & Commissioning Charges

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (25MM)

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required

Supply,of following sizes of PVC sheathed LT XLPE armoured, aluminium 1.1KV grade, as required of the following sizes. (4C X 10 sq.mm cable)

Supply,of following sizes of PVC sheathed LT XLPE armoured, COPPER CABLE 1.1KV grade, as required of the following sizes. (3C X 6 sq.mm cable)

Supply and installation of 63A 4P CABLE CONNECTOR PLATE with 10nos of aluminium thimble lugs (10 sqmm)

Chandan Singh Kuwarbi (BID ID -363854)