Patch work of KIP canal shutters SBC offtake Panivizha cross shutter 14 th mile cross shutter

Amount

Dismantling old damaged shutter, embedded parts which need Pathwork and its hoisting mechanism- Supply Fabrication erection of new embedded parts and allied civil work etc.

OD19362/2022-2023:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Unit / Embedded parts etc. of the sameand stacking at a distance of 100 meter including hire of machinery labour etc. complete as directed by thedepartmental officer at the site.(weight of the unserviceable shutters and embedded parts may be calculatedas 60% and unserviceable hoisting units as 80 % )

OD19368/2022-2023:Clearing grass from banks of channel and removal of silt, zoological waste & debris from canal bed, removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared including conveyance charges

OD19370/2022-2023:RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.

OD19369/2022-2023:Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

OD22716/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD22715/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD22714/2022-2023:Supply of MS round bar including cost of conveyance charges

OD19356/2022-2023:Fabrication and errection of Embedded parts for canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Patchwork replacement of bottom and vertical rubber seals & Painting at shutter , Hoisting units,etc.

OD22719/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD22718/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD19353/2022-2023:Patchwork of mechanical structures and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD19371/2022-2023:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of MS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

OD19372/2022-2023:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of MS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

overhauling of rollers and hoisting mechanism, erection of shutter and hoisting mechanism which were dismantled and conducting trail run etc.

OD19357/2022-2023:Overhauling the thrust rollers including remove, recondition, refitting etc including cost of all materials, machinery, labour, all lift and lead, incidental and conveyance charges etc. complete.

OD19358/2022-2023:Reconditioning of the Worm and pinion reduction gear box unit connected to the bull gear train mechanism and reconditioning of damaged teeth of worm and pinion, and bend checking and correction of screw rods ,lubrication, providing handle, consumables, fasteners, oil seal, labour, conveyance of materials, tools etc.

OD19367/2022-2023:Overhauling and Reconditioning of the Worm and pinion reduction gear box unit connected to the bull gear train mechanism and reconditioning of damaged teeth of worm and pinion, bend checking and correction of srew rod, supplying shaft and plummer block,replacement of chain for safe working ,lubrication,providing handle, consumables, fasteners, oil seal, labour, conveyance of materials, tools etc.

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD19365/2022-2023:Erection of canal shutter/Hoisting bridge/platform including hand rails,ladder etc. safely on the civil structure, assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site.

OD19361/2022-2023:Trial run the gate with its hoisting mechanism etc. including cost of all materials, machinery , labour, all lift and lead, incidental and conveyance charges etc. as per instruction of departmental officers in charge.

GEO THOMAS

Bidder Name

GEO THOMAS

Excellent