Improvement works to residential building at RTPS Colony (Stage wise)

Improvement works to residential building at RTPS Colony (Stage wise)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge For thickness of tiles 10 mm to 25mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of En...

Providing and laying in position Cement Concrete of Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt crushe...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...

Providing Flush / Ruled/ Struck or weathered Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of mat...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cist...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and laying vitrified floor tiles of size 600x600mm with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colou...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 20mm nominal dia PipesUnplasticised Polyvinyl Chloride (uPVC) pipes for external work for cold water supply including all uPVC plain & brass threaded fittings This includes jointi...

Supply of PPR Ball Valve Plastic (Heavy Body) confirming to IS 15801- 2008 and DIN Standards 8077/8092 PPR Ball Valve Plastic (Heavy Body) 20mm

Providing and fixing 15mm nominal bore PTMT bib cock of approved quality and colour, 86 mm long, weighing not less than 88 g.

Providing and fixing White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,...

Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen sink without drain board 610x510 mm bowl depth 200 mm as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including paintin...

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 ltr/ 10 m²) over existing cement paint surface including preparing the surface after ...

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound) content less than 50 g/L of approved brand and manufacture, including applying additional coa...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One coats on old work as per specifications and as per directions of Engineer in charg...

Providing and fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic El...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned, chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door...

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dr...

Providing and fixing in position Mathi/Nandi wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 30mm. thick, 75mm wide in two halves with panels ...

Repair to existing ply wood ward-robes with 19mm plywood, beading, laminate and all necessary including cost of materials labour, lead, complete as per specifications

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :-100mm

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :-75x47x1.80mm

Providing and fixing bright finished brass hard drawn hooks and eyes :100 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge-SS Aldrop 16mm dia, 200mm

Providing and fixing of factory-manufactured 16mm thick Bison Panelled Door Shutter of size 0.75x2.0m made of high-density cement bonded particle board of approved make and quality including cutting t...

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing 110mm nominal dia Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints comp...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting,fixing in position and applying a priming coat of approv...