Annual Plan-Kannur DP Proj.No. 663/25-Kalliassery KPRGHSS mainteanace in Kalliassery GP

Amount

Maintanance

OD338321/2024-2025:Demolishing Laterite masonry in manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges: In cement mortar

OD338386/2024-2025:Laterite masonry with departmental Laterite stones of size 35x20x20cm in cement mortar 1:6 for foundation and basement o including all cost of materials, labour charges etc. (Modified 50.6.7.1)

OD338391/2024-2025:Laterate masonry with neatly dressed laterate stone of size35x20x20cm or nearest size in cement mortar1:6 for foundation and basement including all cost of materials, labour charges etc. (MOD 50.6.7.1 of DAR)

OD391276/2024-2025:Laterite neatly dressed stones of size 35x20x20cm or nearezt size in cement mortar1:6 for superstructure above plinth level up to floor five level including cost of materials labour charges etc. complete.(MOD 50.6.7.2 of DAR)

OD415332/2024-2025:Half brick masonry with Terracotta Ventilator Brick ( Approved Pattern, 20x20x6cm size, Locally made) superstructure above plinth level up to floor V level with Polymer modified adhesive mortar-Modified 6.13.1

OD338842/2024-2025:Laterate dry masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size for foundation and basement including all cost of materials, labour charges etc. (MOD 50.6.7.1 of DAR)(without Mortar)

OD339066/2024-2025:Lateriate exposed masonry (Decorative work) in cm 1:6 using laterite stone of size 35x20x20cm finely dressed to 33x18x18 cm size smoothly finished laterite stone, so as to get the masonry in joint free appearance including smoothening the surface of the completed masonry and making good for application of sealent coat to be paid seperately.

22.14.1:Grading roof for water proofing treatment with:Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

OD418576/2024-2025:Providing and fixing steel bib cock of approved quality :20 mm nominal bore

OD339508/2024-2025:Providing and laying 60mm or nearest thick factory made cement concrete interlocking paverblock made by block making machine with strong vibrator compaction, of approved size, design and shape, laid in required colour and pattern over and including 50mm thick compacted bed of 6mm metal,filling the joints with finesand etc complte as per the direction of Engineer-in charge. Vertically including cost and conveyance of all materials all labour charges, fabricating etc. complete.(Modified 16.68 by replacing Sand bed 6mm stone aggregate bed)

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

14.46:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

13.71:Lettering with black Japan pint of approved brand and manufacture

Bidder Name

AFSAL A A