PROVN OF GRILL/CHANNEL DOORS WITH SHEETS, INTERLOCKING TILES, HARDSTANDING, LIGHTS AND FENCING FOR SPORTS INFRASTRUCTURE ALONG WITH SPECIAL REPAIR OF GUARDER IN MONO RAIL CRANE AT AF STN SAMANA

Amount

M&L for cutting holes in stone walls built in cement motar or cement lime mortar for inserting Hold fasts(depth of embedded portion of hold fast or lugs measured from the face of jamb into the wall exc. one brick but not exc. two brick) and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410 -W(Gde-E-250) quality A complete all as specified and directed.

M&L for Providing precast cement concrete type B-1 1:2:4(20mm graded aggregate) in window or door cills, roof kerb or mud stop rounded or chamferd on edges, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed by engg-in-charge.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel (ordinary tint) paint over a coat of Red oxide.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removal of debries to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed.

M&L for TMT bars (FE-500 Grade) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for steel reinforcement of TMT bars (FE-500 Grade) n exc 8 mm dia as in stirrups cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.

S & F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

Cutting opening in cement concrete walls (any description) with or without reinforcement for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. with or without reinforcement complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Use & waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete ( Square, rectangular or polygonal) complete all as directed.

M&L for Reinforced cement concrete 1:1.5:3 using (20mm graded aggregates) for Columns, pillars, piers, posts and struts complete all as specified and directed.

Use & waste of Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for rough finished flat surface of concrete complete all as directed.

M&L for Reinforced cement concrete 1:1.5:3 (20mm graded aggregates) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil.

M&L for Reinforced cement concrete 1:1.5:3 (20mm graded aggregates) for filling in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.

M&L for MS rolled section Fe 410 W (Gde-E-250) quality-B as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

M&L for MS rolled section Fe 410 W (Gde-E-250) quality-B as in main and cross beams, hip and jack rafters ; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

M&L for MS rolled section Fe 410 W (Gde-E-250) quality-B as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft / loose soil complete.

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate)as in sub base,floor complete all as specified and directed .

M & L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate)as in floors complete.

Supply and Fix Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'

M&L for preparing surfaces plastered or unplastered on wall and Priming plastered and other surfaces with alkali resistant priming paint along with applying two coats of Distemper oil emulsion, over two coat of 3mm thick wall care putty on wall all as specified & directed.

M&L precast cement concrete type C-1 1:5:8 (20mm graded agg) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4.complete all as specifed and as directed by Engr In charge.

M&L for rendering 15 mm thick on fair faces of brick works or concrete surface in cement plaster 1:4 finished even & fair all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Removing excavated material, n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Fe410-W(Gde-E -250 ) quality B Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections complete all as specified and directed.

S&F Fe410-W(Gde-E -250 ) quality B Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

M& for Preparation of New or previously untreated surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of epoxy paint over one coat of red oxide primer

Taking down existing monorail crane of any capacity from the height of 11 mtrs (approx) and reinstallation of same after replacing the monorail girder all as specified and directed by engg- in -charge. NOTE: Tenderer is deemed ti have visited the site of work to analyse the extent of work before quotting rates.No extra claim shall be entertained on this account in future.)

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil.

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for cement concrete type D2 1:4:8(40 mm graded aggregate ) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base.

M&L for Hard core of Broken stone/ boulders ; broken to gauge n exc 63 mm complete all as specified and directed.

S&f Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade joined with Grey cement and pigment complete all as specified and directed.

M&L for preparing surfaces plastered or unplastered on wall and Priming plastered and other surfaces with alkali resistant priming paint along with applying two coats of cement paint complete all as specified & directed.

M&L for Cement concrete type C2 1:3:6(40mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

S & F angle iron / flat iron as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S & F Mild steel screw bolts (machine made) of neck diameter 10 mm & 40mm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed

Supply only chain link fencing, any size or type including line wires, galvanised mild steel to any type of standards, rails, straining bolts etc complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

M&L preparation of new or previously untreated steel and iron surfaces of any description n exc 10 cm width or girth when uncon nected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for 75mm thick Cement concrete type B- 2,1:2:4 (40mm graded aggregate) as in floor/path/hardstanding etc complete.

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:6, complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in Cement Plaster 1:4, complete all as specified and directed.

M&L for chequered cement concrete tile with white cement and pigment (of approved tint) of size 30 cm x 30 cm x 25 mm thick , set, jointed and pointed in white cement slurry complete.

M&L for outdoor coloured vitrified paving tiles, of size 300 mm x 300 mm x 8 to 10 mm thick as in floors etc laid over and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M&L for Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified and directed.

Supply and erect in true vertical position 9.00 metre long steel tubular swaged poles with cast iron base plate, finial plug, bolts, nuts & screws as specified type 410 SP-31 painting of exposed surface of poles with two coats of aluminium paint over one coast of red oxide primer painting upto 1.5 mt height above copig in alternate band (20 cm wide strips) with two coat of synthetic enamel paint painting of pole below ground leval & entire internal surfaces with two coats of bituminous anti corrosive paint complete all as specified and directed.

Supply and fixing in replacement LED flood light 200 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, complete and directed. Make :-cat no. JETAIRIALPHAFL200WLED857APBOLTG of havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

Supply & laying PVC underground cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed

M&L for providing dry river sand as in sand cushioning to under ground PVC cable including punning down of sand in layer all as specified and directed. (Note: Work shall be executed as per clause 19.75 of standard schedule of rates part-1 (2009) for measurement purpose thickness of sand after punning down will be considered.)

Supply & laying ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV , Type I , flat size 250 mm X 150 mm X 40 mm in trenches as protection to LT UG cable all as specified and directed.

S&F Sheet moulding compound (SMC) junction box of size 280 mm x 170 mm x 130mm, comprising three phase aluminium bus bar and one No MCB SP, 06 Amps "C" type, fixed on pole with mild steel clamps, nuts and bolts complete.

KEVAL ENTERPRISE

Vijay Construction Co

Shree Khodal Infra Project

natwarsinghdipsingh

jagdish machinery stores

Sukhi Electricals