Janpad bhadohi me prayagpur avam chenathu (raghaipur) prayagraj ke madhya varuna nadi par kshatigrast laghu setu ke vishesh marammat ka karya

Construction of Embankment with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 303.2

Earthwork in excavation for foundation of structure as per drawings and technical specification, including setting out, construction of shoring and bracing, removal of sumps and other deleterious matter, dress of sides and bottom backfilling with approved material.

Sand Filling in foundation trenches as per drawing and technical specification

PCC Grade M-15 in open Foundation complete as per drawing and Technical specifications.

Brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and technical specifications Clauses 600, 900 and 1208.4

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications

Rainforced cement concrete M 25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications clauses 800and 1211

Replacement of Expansion Joints complete as per drawings

Construction of K.C.Drain in both sides of the road etc. up to out fall

Construction of Chute Drain

Fabrication and supply of steel Railing including cost of steel allcarriage welding cutting labour grinding smooth finishing including applying of one coat of red oxide steelprimer paint required for proper completion of the work as per direction of Engineer in charge.

Providing and laying cement concrete wearing course M 30 including reinforcement complete as per drawing and technical specifications clauses 800and 1206.3

Wall painting (two coats) with plastic emulsion paint of First quality approved brand and manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand prepared smooth.

Painting Iron work in large area with one coat ready mixed paint priming one coat of approved paint (British ANTISOL or equaivalent) including supply of all materials labour and T&P etc.required for proper completion of the work paint to be used should conform to the I.S.I No 130-1950

Supply and installation of delinators (Roadway indicators, hazard markers, obejct marker) 80-100 cm. high above ground level, painted black and white in 15 cm wide strips, fitted with 80x100 mm rectangular or 75mm dia circular reflectorised panel at the top buried or pressed into the ground and confirming to IRC:79 and the drawings.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail , 70 cm above road /ground level ,fixed on ISMC series channel vertical post ,150 x 75 x 5 mm spaced 2 m centre, 1.8 m hight 1.10 m below groung /road level,all steel parts and fitments to be galvanised by hot dip process,all fitting to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330mm long complete as per clause 810.

Providing, laying, spreading and compacting stone aggregates of specific sizes (45-63 mm) to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate,watering and compacting to the required density . WBM Grading-II as per Technical Spcification clause 405.

Providing,laying,spreading and compacting stone aggregates of specific sizes (22.4-53 mm) to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with smooth wheeI roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate,watering and compacting to the required density. WBM Grading-III as per Technical Spcification clause 405.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502.

Providing and applying tack coat with bitumen (VG-10) using bitumen distributor at the rate of 0.30 kg per sqm on the prepared surfaces cleaned with hydraulic broom Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line,grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant, laying and rolling with three wheel 80-100 kN static rollar capacity finished to required level and grades to be followed by seal coat

Providing and laying seal coat sealing the voids in a bituminous surface laid to specefication to the specified levels using crushed stone chipping 6.7mm size and the penetration bitumen VG-10 as per Technical Specification Clause 510.

Please Enable Macros to View BoQ information