CONSTRUCTION OF 1.2 KM LONG INDO-NEPAL CANAL.

Amount

Dewatering During Construction

Dewatering of Construction Sites including supply, installation and removal of pumping equipment from site

Surface Excavation

Excavation in all kinds of soils including soil mixed with moorum, gravels & boulders under all conditions of saturation in the foundation, stock usable material for embankment with all lift and lead for surplus material as per drawing and specifications

Excavation for removal of Ring bund

Embankments Construction

Filling in embankments

Earthwork in embankment with materials obtained from excavation including all lift and lead

i) Lead upto 1.0 km

ii) Lead beyond 1.0 km and upto 3.0 km

Filling in Ring Bund

Earthwork in embankment with materials obtained from excavation including all lift and lead

i) Lead upto 1.0 km

Concrete

Providing and laying M10/A20 plain cement concrete (Mud mat)

Providing and laying reinforced cement concrete (M25/A40) in cutoff , raft, pier , abutment, slab, concrete cladding etc.

Providing and laying reinforced cement concrete (M25/A20) in parapet, etc.

Concrete in Blockouts M30/A20

Construction of (M25/A20) RCC slab bridge, approach slabs etc as per IRC classification rested over pier/abutment of headregulator, complete in all respect as per drawings and specifications.

M25/A20 grade concrete

Pre -cast unit (Beams)

Variation in Cement

Admixtures for concrete

Air-entraining agent

Water reducing agent

Bridge ancillaries

Elastomeric bearing pads

Drain boxes

Dismantling Existing reinforcement Concrete Structure

Formwork

Formwork(General)

Class F1

Class F2

Class F1C

Class F2C

Class F3

Class F3C

Reinforcing Steel

Deformed Reinforcement Bars - Grade Fe 500

Joints in concrete structure

Providing and laying PVC water stops 230 mm wide in construction joints as per drawings and specifications

Metal Works

Railing

Ladders

Installation of metalworks supplied by others

Steel pipes

100mm dia

150 mm dia

Slope Protection

Supply of 9 mm 4-strand Polypropylene (PP) Rope Gabions (UV stabilized) with 100x100 mm aperture and size 2mx1mx1m in 2 compartments of 1m each with/ without slings as per the specification.

Supply and placing boulders of around 20 kg to 40 kg in weight and 150 mm to 300 mm in size in PP rope gabion box including cost of supply of polymer ropes for tying, cost of tying the lid of gabions with polymer ropes and cost of placing the gabion box at desired locations as per the specification.

Supply of mechanically woven double twisted hexagonal gabions (Zn coated) of size 2mx1mx1m with one diaphragm having mesh opening 100mm x 120 mm, mesh wire diameter 3.0mm, edge/ selvedge wire diameter 3.9mm and lacing wire diameter 2.2mm conforming to IS:16014 and as per technical specification.

Supply and placing boulders of around 20 kg to 40 kg in weight and 150 mm to 300 mm in size in gabion box including cost of supply of lacing wire/ rings for tying, cost of tying the lid of gabions with lacing wire/ rings as per the specification.

Laying of geomembrane including cost of supply, storage and transportation upto site as per specification.

Description of Work / Item(s)

Amount

Dewatering During Construction

Dewatering of Construction Sites including supply, installation and removal of pumping equipment from site

Surface Excavation

Excavation in all kinds of soils including soil mixed with moorum, gravels & boulders under all conditions of saturation in the foundation, stock usable material for embankment with all lift and lead for surplus material as per drawing and specifications

Embankments Construction

Filling in embankments

Earthwork in embankment with materials obtained from excavation including all lift and lead

i) Lead upto 1.0 km

ii) Lead beyond 1.0 km and upto 3.0 km

Providing and laying Rock toe/Graded filter on both sides of canal embankments as per drawings and specifications

i) Boulder

ii) Gravel

iii) Coarse sand

Concrete

Providing and laying M10/A20 plain cement concrete (Mud mat)

Providing and laying reinforced cement concrete (M25/A20) in parapet, etc

Providing and laying reinforced cement concrete lining (M25/A20) over bed and side slopes of canal as per drawings and specifications

Variation in Cement

Admixtures for concrete

Air-entraining agent

Water reducing agent

Formwork

Canal Formwork

Class F1

Class F2

Class F3

Reinforcing Steel

Deformed Reinforcement Bars - Grade Fe 500

Joints in concrete structure

Providing and laying PVC water stops 230 mm wide in construction joints as per drawings and specifications

Metal Works

Railing

Ladders

Installation of metal works supplied by others

Steel pipes

100mm dia

150 mm dia

Slope Protection

Supply of mechanically woven double twisted hexagonal gabions (Zn coated) of size 2mx1mx1m with one diaphragm having mesh opening 100mm x 120 mm, mesh wire diameter 3.0mm, edge/ selvedge wire diameter 3.9mm and lacing wire diameter 2.2mm conforming to IS:16014and as per technical specification.

Supply and placing boulders of around 20 kg to 40 kg in weight and 150 mm to 300 mm in size in gabion box including cost of supply of lacing wire/ rings for tying, cost of tying the lid of gabions with lacing wire/ rings as per the specification.

Providing and laying Stone/boulder pitching including all lead and lifts as per drawings and specifications

Providing and laying stone /boulder pitching in 1:6 cement mortar as per drawings and specifications for toe drains, top drains and slope drains.

Turfing with live sods on the embankment slopes of canal as per drawing and specifications

Roadworks

Providing and laying 250mm/300mm thick WBM base course for 5.5 m wide service / inspection road over left bank and 4 m wide non-inspection road over right bank as per drawings and specification.

Providing and laying 5 cm premix carpet surfacing in two layers of 2.5cm over WBM base course as per drawings and specification.

Description of Work / Item(s)

Amount

Dewatering During Construction

Dewatering of Construction Sites including supply, installation and removal of pumping equipment from site

Surface Excavation

Excavation in all kinds of soils including soil mixed with moorum, gravels & boulders under all conditions of saturation in the foundation, stock usable material for embankment with all lift and lead for surplus material as per drawing and specifications

Embankment Construction

Providing and laying rock toe/Graded filter on both sides of canal embankments as per drawings and specifications

i) Boulder

ii) Gravel

iii) Coarse sand

Concrete

Providing and laying M10/A20 plain cement concrete (Mud mat)

Providing and laying reinforced cement concrete (M25/A40) in cutoff , raft, pier ,wing walls, slab, etc.

Providing and laying reinforced cement concrete (M25/A20) in parapet, etc.

Variation in Cement

Admixtures for concrete

Air-entraining agent

Water reducing agent

Formwork

Formwork(General)

Class F1

Class F2

Class F1C

Class F2C

Class F3

Class F3C

Reinforcing Steel

Deformed Reinforcement Bars - Grade Fe 500

Joints in concrete structure

Providing and laying PVC water stops 230 mm wide in construction joints as per drawings and specifications

Slope Protection

Supply of mechanically woven double twisted hexagonal gabions (Zn coated) of size 2mx1mx1m with one diaphragm having mesh opening 100mm x 120 mm, mesh wire diameter 3.0mm, edge/ selvedge wire diameter 3.9mm and lacing wire diameter 2.2mm conforming to IS:16014 and as per technical specification.

Supply and placing boulders of around 20 kg to 40 kg in weight and 150 mm to 300 mm in size in gabion box including cost of supply of lacing wire/ rings for tying, cost of tying the lid of gabions with lacing wire/ rings as per the specification.

Providing and laying CC block (M20/A40) as per drawings and specifications

Description of Work / Item(s)

Amount

Mandatory tools & tackles (Statement 1-A)

A. Mandatory Tools comprising of following items / instruments / equipments: 1. 3/8 inch to 1/2 inch square drive reducer. 2. Screw driver socket 1/2 inch square drive 3. Sockets 1/2 inch square drive a) 7/16 inch b) 9/16 inch c) 5/8 inch 4. Extensions 1/2 inch square drive a) 2 inches b) 5 inches 5. Combination wrench one end ring and one end open a) 7/16 inch b) 1/2 inch c) 9/16 inch d) 3/4 inch e) 7/8 inch f) 15/16 inch 6.D.E. spanner set 6mm to 32 mm 7.Ring spanner set 6 mm to 32 mm 8.Adjustable spanner 12 inches 9 Adjustable spanner 6 inches Items 1 to 3 shall be of reputed make and Item 4 shall be of SKF/FAG/ reputed make. B. Good quality Tool boxes for items at 'A' above.

Mandatory Spare Parts (Statement 1-B)

Head Regulator Service gates & rope drum hoists

Rubber seal along with stainless steel fasteners for Head Regulator fixed wheel gate

Complete Wheel assembly for Head Regulator fixed wheel gate

Bearings for electric motors of rope drum hoist of Head Regulator fixed wheel gate

Brake shoes for rope drum hoist

Bearings/bushes for rope drum hoist

Bearings/bushes for sheaves of Head Regulator fixed wheel gate

Fuses, auxiliary contactors, push-buttons, indication lamps, switches, limit switches and relays for rope drum hoist of Head Regulator fixed wheel gate

Bush and washers of guide roller assembly for Head Regulator fixed wheel gate

Head Regulator Upstream Bulkhead

Rubber seals including stainless steel fasteners for all Head Regulator Upstream

Head Regulator Downstream Bulkhead

Rubber seals including stainless steel fasteners for all Head Regulator Upstream bulkhead

Description of Work / Item(s)

Amount

Head Regulator Trash racks

Trash racks for complete Head Regulator openings comprising four numbers trash rack panels of sizes as per specifications.

First stage Embedded parts for 1.1

Head Regulator Service Gate and Rope Drum Hoist

Head Regulator Service gate (fixed wheel type)

First Stage Embedded Parts for 2.1

Second Stage Embedded Parts including dogging etc for 2.1

Rope drum hoist complete in all respect and control equipment for 2.1

Common Hoist supporting structure & trestle etc for two nos. Head regulator service gates for 2.1

Mandatory Spare Parts (As per statement-IB)

Head Regulator Upstream Bulkhead, Down Stream Bulkhead and Lifting Beam

Head Regulator Upstream Bulkhead (Slide type)

First Stage Embedded Parts etc. for 3.1

Second Stage Embedded Parts including dogging etc for 3.1

Head Regulator Downstream Bulkhead (Slide type)

First Stage Embedded Parts etc. for 3.4

Second Stage Embedded Parts including dogging etc for 3.4

Common Lifting Beam complete in all respect etc. for 3.1 & 3.4

Mandatory Spare Part (As per statement-IB) for 3.1

Mandatory Spare Part (As per statement-IB) for 3.4

Mandatory tools & tackles (As per statement-1A)

Description of Work / Item(s)

Amount

Recommended Spare Parts

Head Regulator Service gates

Head Regulator Service gates and Rope Drum hoists

Head Regulator Upstream Bulkhead gates

Head Regulator Downstream Bulkhead gates

Recommended Special Tools and Tackles

Head Regulator Service gates

Head Regulator Service gates and Rope Drum hoists

Head Regulator Upstream Bulkhead gates

Head Regulator Downstream Bulkhead gates

Description of Work / Item(s)

Amount

HEAD REGULATOR

CANAL

CROSS DRAINAGE

Hydro mechanical Works

STARCON INFRA PROJECT INDIA PRIVATE LIMITED

STARCON INFRA PROJECT INDIA PRIVATE LIMITED

ANS Constructions.com

STARCON INFRA PROJECT INDIA PRIVATE LIMITED

ANS Constructions.com

ANS Constructions.com

STARCON INFRA PROJECT INDIA PRIVATE LIMITED