S. R. to Taluka Subjail Vyara, Talukasubjail Songadh and Taluka Subjail Uchchhal, Dist. Tapi. (Incl. Elect. ) (S. R. Jail Priority - 2025- 26) (Eighth Attempt)

No. In Figure In Words

1 Removing dry or oil bound distemper by a washing and 138.00 Sqmt 13.09 Rupees Thirteen And Paise Nine Only

scraping and sand papering the ceilings and sloping roofs

surface smooth including necessary repairs to scratches

2 Removing dry or oil bound distemper by a washing and sand 602.00 Sqmt 11.47 Rupees Eleven And Paise Forty

papering the wall surface smooth including necessary repairs Seven Only

to scratches complete.

3 Dismentalling tiled of stone floors laid in mortar including 70.00 Sqmt 48.92 Rupees Forty Eight And Paise Ninety

stacking of serviceable materials and disposal of Two Only

unserviceable materials with all lead and lift.

4 Demolition of brick work and stone masonary including 1.30 Cumt 558.57 Rupees Five Hundred Fifty Eight And

staking ofserviceble materials with all lead and lift (ii) in Paise Fifty Seven Only

cement mortar

5 Excavation for foundation in Dense or Hard soil up to 1.5 m. 43.00 Cumt 151.89 Rupees One Hundred Fifty One And

depth including sorting out and stacking of useful materials Paise Eighty Nine Only

and disposing of the excavated stuff up to any Lead and Lift.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

6 Excavation for foundation in Dense & Hard from 1.5 mt.to 3.0 39.00 Cumt 164.79 Rupees One Hundred Sixty Four And

mt. depth including sorting out and stacking of useful Paise Seventy Nine Only

materials and disposing of the excavated stuff up to any Lead

7 Providing and laying cement concrete 1:4:8 (1-cement:4- 4.00 Cumt 2720.01 Rupees Two Thousand Seven

coarse sand:8-graded stone aggregate of 40mm nominal Hundred Twenty And Paise One Only

size) and curing etc.complete excluding cost of formwork in

Foundation and Plinth.

8 Filling available excavated earth ( excluding rock) in trenches, 18.50 Cumt 132.33 Rupees One Hundred Thirty Two And

plinth sides of foundations etc. in layers not exceeding 20cms. Paise Thirty Three Only

in depth consolidating each deposited layer by ramming and

9 BRICK WORK in using common burnt clay building bricks 24.00 Cumt 4080.74 Rupees Four Thousand Eighty And

having crushing strength not less than 35 kg/sq.cm. In Paise Seventy Four Only

cement mortar 1: 6( 1 cement : 6 coarse sand ) etc comp. in

Foundation up to Plinth

10 Providing and laying Honey comb Brick masonary using 10.00 Cumt 2734.10 Rupees Two Thousand Seven

common burnt clay building bricks in cement mortar 1:6(1 Hundred Thirty Four And Paise Ten

cement, 6 coarse sand below ground level. Only

11 Brick work using common burnt clay building bricks having 5.90 Cumt 4359.80 Rupees Four Thousand Three

crushing strength not less than 35 Kg/Sq.cm.for Ground floors Hundred Fifty Nine And Paise Eighty

in cement mortar 1:6 (1-cement;6-coarse sand), Conventional Only

bricks. Bricks with frog only shall be used.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

12 Providing and laying Controlled cement concrete M-250 4.00 Cumt 7722.96 Rupees Seven Thousand Seven

finishing smooth with curing etc. complete including the cost Hundred Twenty Two And Paise

of formwork but excluding the cost of reinforcement for Ninety Six Only

R.C.C. work in SLAB having thickness of 13cm. and up to

cms for GROUND FLOOR. Providing and Mixing Plasticiserof

approved make in proportion as per mix design.

13 Providing and laying Controlled cement concrete M-250 and 2.00 Cumt 9023.88 Rupees Nine Thousand Twenty Three

finishing smooth with curing etc.. complete including the cost And Paise Eighty Eight Only

of formwork but excluding the cost of reinforcement for

BEAMS having any cross sectional area for GROUND

FLOOR. Providing and Mixing Plasticiser in cement concrete

including rate of labour,material etc.as per direction of

Engineer in charge.

14 Providing and laying T.M.T STEEL reinforcement (Grade Fe- 300.00 Kg 76.52 Rupees Seventy Six And Paise Fifty

500) for RCC work including cutting,bending,binding and Two Only

placing in position etc.comp for all floor.Steel shall be as per

approved make list of GSPHCL.

15 Providing 10 mm thick cement PLASTER in single coat of 23.00 Sqmt 200.10 Rupees Two Hundred And Paise Ten

interior plastering and finished even and smooth in cement Only

mortar 1:3 ( 1 cement : 3 sand ) and finishing with floating

coat of neat cement slurry including providing and mixing with

WATER PROFFING material For GROUND FLOOR

16 Providing CEMENT VATA (10cm x 10cm) size quarter round 16.00 Rmt 24.04 Rupees Twenty Four And Paise Four

in cement mortar (1 : 1) including neat cement finishing, Only

watering etc. Complete.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

17 Providing 10 mm thick cement PLASTER in single coat on 22.00 Sqmt 217.46 Rupees Two Hundred Seventeen And

ceilings for interior plastering and finished even & smooth in Paise Forty Six Only

C.M. 1: 4 ( 1 cement : 4 sand ) including finishing with a

floating coat of neat cement slurry at GROUND FLOOR.

18 Providing 15 mm thick cement PLASTER in single coat on 65.60 Sqmt 220.04 Rupees Two Hundred Twenty And

block or concrete wall for interior plastering and finished even Paise Four Only

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including

finishing with floating coat of neat cement slurry at GROUND

19 Providing and laying white glazed tiles 6mm thick in flooring 9.80 Sqmt 883.07 Rupees Eight Hundred Eighty Three

treads of steps and landing laid on a bed of 12mm thick And Paise Seven Only

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement. Including Curing of All Floors

The tiles size shall be of 300mmx300mm.

20 Provinding & laying Printed / Coloured GLAZED TILES 6 mm 44.20 Sqmt 1462.62 Rupees One Thousand Four Hundred

thick in skirting, risers of steps and DADO on 10mm thick Sixty Two And Paise Sixty Two Only

cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed

with white cement slurry for ALL FLOOR. The size,brand &

make of tiles shall be as approved by GSPHCL.

21 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 39.00 Sqmt 1311.40 Rupees One Thousand Three

mm thick tile flooring over 20 mm (average) base of cement Hundred Eleven And Paise Forty Only

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface orfixing

on existing flooring by adhesive including dismentaling of

existing flooring and material jointed with color cement slurry

including finised with flush pointing & cleaning the surface

etc.Completed Brand of the tiles shall be as per approved

make list of GSPHCL. Shade & Size of tiles shall be as

specified in tender item.As per Approved Design.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

22 Providing & Laying 24" x 24" in Skirting riser of steps and 2.00 Sqmt 1420.50 Rupees One Thousand Four Hundred

dado Double Charge vitrified 8 to 10 mm thick tile over 10 Twenty And Paise Fifty Only

mm thick Cement plaster of cement mortar 1:3 (1 cement:

coarse sand) jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete Brand

of the tiles shall be as per approved make list of GSPHCL.

Shade & Size of tiles shall be as specified in tender item.As

per Approved Design.

23 Providing & Laying Kotah stone slab (Polished, Green color, 13.00 Sqmt 1104.80 Rupees One Thousand One Hundred

all edge of kotah stone slab should be chiseled dressed) & Four And Paise Eighty Only

stone shall be in one piece. flooring over 20 mm (average)

thick base of cement mortar 1:6 (1 cement: 6 coarse sand

over and jointed with grey cement slurry including rubbing and

polishing complete 25 mm thick..

24 Providing and Fixing Kota stone slab 20 mm. thick in dado 3.00 Sqmt 1192.00 Rupees One Thousand One Hundred

and pillars laid on 10 mm. thick cement mortar 1:3 (1 cement: Ninety Two Only

3 coarse sand) and jointed with grey cement slurry including

rubbing and polishing etc. complete.Over 20mm Thick based

of cement 1:6(1 cement: 6 coarse sand) laid over & sand &

with grey cement slurry. In Green Colour

25 Providing & fixing Concealed Center Point to wall ceiling & 10.00 Rmt 251.31 Rupees Two Hundred Fifty One And

floor CPVC (SDR-13.5) PIPE having National Sanitation Paise Thirty One Only

Foundation (NSF) seal For Portable Water of 25 mm. dia.

nominal bor tube fitting and clamps including making good

the wall, ceiling and floor etc. Complete

26 Providing & fixing Concealed Center Point to wall ceiling & 72.00 Rmt 206.73 Rupees Two Hundred Six And Paise

floor CPVC (SDR-13.5) PIPE having National Sanitation Seventy Three Only

Foundation (NSF) seal For Portable Water of 20 mm. dia.

nominal bor tube fitting and clamps including making good

the wall, ceiling and floor etc. Complete

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

27 Providing, supplying and fixing Corrugated DWC HDPE Pipes 55.00 Rmt. 396.00 Rupees Three Hundred Ninety Six

of Class SN8 Structured Wall polyethelene Piping systems Only

(Pipe with online/offline coupler and elastomeric sealing ring)

with non-smooth External Annular Corrugated and Smooth

Internal Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores

etc. complete. (150 mm ID Dia) Including Lowering, laying

and jointing of class SN 8 structured wall ( External Annular

Corrugated & Smooth Internal surface) Polyethylene Piping

and fittings with the help of coupler ( on line / off line )

attached with one end of pipes, sliding over the elastomeric

sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the

trench, laying on the lower bedding (constructed at bottom of

trenches) at prescribed gradient,depth & alignment ,testing

the water tightness of the joints, ensuring the continuity tests

of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of

laying etc. as per direction of Engineer-in-charge.

28 Providing & Fixing 15mm One way Bib Tap with Wall Flange. 10.00 No 990.61 Rupees Nine Hundred Ninety And

Rate are inclusive of all materials, Labour & Necessary Paise Sixty One Only

Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In

charge. Materials used for the above items Must be list

approved by G.S.P.H.C.L.

29 Providing and fixing water Closet Squatting (ORRISSA TYPE 3.00 No 1343.85 Rupees One Thousand Three

W. C PAN ) size 580mm first quality including necessary "P" Hundred Forty Three And Paise

or "S" trap, including jointing the trap with pan & soil pipe in Eighty Five Only

vitreous chine white colour, Joints shall be pipe sealant.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

30 Providing and fixing gun metal check or non return full way 7.00 No 416.47 Rupees Four Hundred Sixteen And

WHEEL / HANDLE VALVE 25 mm dia. Paise Forty Seven Only

31 Constructing brick masonry chamber for under ground C.I. 6.00 No 3793.18 Rupees Three Thousand Seven

inspection chamber and bends with brick having crushing Hundred Ninety Three And Paise

strength not less than 35 kg./cm2 in C.M. 1.5 precast R.C.C. Eighteen Only

cover 1:1.5:3 of size 455 x 610 mm internal dimensions.

R.C.C. top slab with C.C. 1:1.5:3 mix (1 Cement : 1.5 coarse

sand :3 graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement walls

& bed connect etc. complete rate inclusive of outside plaster

of 15mm thick in cm 1:3 form top of chamber and all side up

to 15 cm deep below ground level. rate also inclusive of

providing and fixing precast cover of size 0.7 m x 0.6 x .07 m

with 2 no of m.s. flat handle in cement concrete 1:1.5:3.

including angle frame of section 40x40x3mm section etc

32 Extra over above item no. 31 for every additional depth of 4.00 No 239.99 Rupees Two Hundred Thirty Nine And

0.1mtr. or part thereof beyond 450mm depth for Block Paise Ninety Nine Only

masonry chamber 455 X610MM.

33 Providing and fixing in position ISI marked Rotational 2000.00 Ltr 3.91 Rupees Three And Paise Ninety One

moulded Polyethylene double layer cylindrical vertical storage Only

tank (IS : 12701 ) water tank size including making inlet and

outlet. Overflow and wash out arrangement with GI

connection including using necessary M H for connection etc.

Complete with closed cover including applying two coats of oil

painting outside the tank etc complete.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

34 Providing and fixing Corrogulated JSW pre coated sheet 63.00 Sqmt 984.37 Rupees Nine Hundred Eighty Four

roofing fixed with galvanised iron J or L hooks, bolts and Nuts And Paise Thirty Seven Only

8 mm dia with bitumen and G.I. Limpet washer or G.I. limpet

washer with white lead complete excluding the cost of

Purlines , rafters and trusses(0.60mm thick)

35 Providing, Fabricating and fixing M.S. GRILL/GATE of 660.00 Kg 75.01 Rupees Seventy Five And Paise One

approved pattern fabricated from M.S. flat,square bars, round Only

bars,c-channel, box pipe as per detail Drawings. Rate is

inclusive of welding with grinding smooth surface, two coats

of Oil paint and one coat of approved brand only by GSPHCL

as per GSPHCL Approved Make List.Structure Steel Shall be

ISI mark in used

36 Providing and fixing solid PVC Flush Door shutter 24mm 3.40 Sqmt 4513.01 Rupees Four Thousand Five Hundred

thick. made from Co-extruded three layer rigid PVC foam Thirteen And Paise One Only

sheet(single Extruded) with density not less than 600kg/cbm

outer layer (0.8-1mm)thick should be rigid PVC with density of

not less than 1400kg/cbm. Door should be water proof,

Termite proof, fire retardant & having good screw holding

capacity(200 kgf). Providing and fixing 100% Solid Wood

Plastic composite (WPC) Door Frame 90mmx45mm made

from wood plastic composite(single Extruded

Process)material with density 780kg/cbm. As per drawing as

directed by the engineer in charge.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

37 Providing and fixing Alluminium section window having 4.40 Sqmt 1902.50 Rupees One Thousand Nine Hundred

extruded Aluminum Colour anodized section frame main Two And Paise Fifty Only

outer size 95mm x 24mm x 1.17mm (of Jindal Section

no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track

member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt.

Kg/mt) with sliding shutters of horizontal member size

mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of

Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of

Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details including one

mosquito jali shutter With Both Side Locking Arrangement

38 Providing and fixing window having extruded aluminum 19.00 Sqmt 1696.73 Rupees One Thousand Six Hundred

Colour anodized section frame main outer size 63.50 x 38.10 Ninety Six And Paise Seventy Three

x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), Only

horizontal two track member size 61.85 mm x 31.75 mm x

1.20mm (of Jindal Section no: 8687 @ wt.of 0.695 Kg/mt),

vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of

Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm

(of Jindal Section no:8949 @ wt.of 0.456Kg/mt), vertical

member of size 40mm x 18mm x 1.29mm (of Jindal Section

no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt.

Kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc complete for window.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

39 Providing and fixing standard extruded of Alluminium section 3.00 Sqmt 1163.92 Rupees One Thousand One Hundred

of size 63mm x 38.10mm x 1.2mm (of Jindal Section : 2434, Sixty Three And Paise Ninety Two

@ Wt 0.643 Kg / mt) with colour anodized alluminium frame Only

for ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

40 Distempering (Two coats) with Oil bound washable distemper 34.50 Sqmt 72.97 Rupees Seventy Two And Paise

of approved brand and manufacture and of required shade on Ninety Seven Only

Walls surfaces to give an even shade, over and including a

priming coat with alkali resistance primer of approved brand

after thoroughly brushing the surface and other foreign matter

and also including preparing the surface even and sand

papered smooth.

41 Finishing celling/slope surface with plastic emulsion paint on 138.00 Sqmt 188.89 Rupees One Hundred Eighty Eight

ceilling/slope surface (two coats) to give an required shap And Paise Eighty Nine Only

even shade after throughly brushing the surface to remove all

dirt and remains of loose poweder material etc. complete.

Rate are inclusive of applying two coats of lapy (putty) and

one coat of primer on new ceilling/slope surface to give and

even shade including throughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

smooth. fine putty shall be approved brand by GSPHCL only

& Primer shall be approved brand by GSPHCL only and

plastic Emulsion Paint Shall be Approved brand by GSPHCL

only paint only.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

42 Finishing Wall surface with plastic emulsion paint on Wall 602.00 Sqmt 176.46 Rupees One Hundred Seventy Six

surface (two coats) to give an required shap even shade after And Paise Forty Six Only

throughly brushing the surface to remove all dirt and remains

of loose poweder material etc. complete. Rate are inclusive of

applying two coats of lapy (putty) and one coat of primer on

new Wall surface to give and even shade including throughly

brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. fine putty shall be

approved brand by GSPHCL only & Primer shall be approved

brand by GSPHCL only and plastic Emulsion Paint Shall be

Approved brand by GSPHCL only paint only.

43 Finishing wall with weather proof exterior emulsion paint on 41.00 Sqmt 150.52 Rupees One Hundred Fifty And Paise

Wall Surface (two coats) over and above applying one coat of Fifty Two Only

primer to given an required shape even shade after throughly

brushing the surface to remove all dirt and remains of loose

powdered materials etc. complete.Primer shall be approved

by GSPHCL only and exterior paint shall be approved brand

by GSPHCL only.

44 Painting two coats (excluding priming coat) on previously 54.00 Sqmt 77.34 Rupees Seventy Seven And Paise

painted steel and other metal surfaces with synthetic enamel Thirty Four Only

paint brushing to give even shade including cleaning the

surface of all dirt, dust, and other foreign matter.

(Electrical Item)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

45a Providing and fixing Point wiring with 1.1 KV grade ISI 30.00 Point 291.00 Rupees Two Hundred Ninety One

marked approved make 2 x 1.5 sq.mm copper PVC insulated Only

FRLS wire with 1.5 sq.mm (green) copper PVC insulated

FRLS wire for earth continuity in exiting FIA approved ISI

mark white colour medium class 20/25 mm dia. embossed

rigid PVC pipe erected flushed on wall/ceiling complete with

company fabricated Metal Groove PVC fitting fixed with

adhesive solution erected On wall along with continuous G. I.

fish wire to draw wires complete with approved make 5/6

Amp. tissino type switch and accessories(Anchor(PENTA)

make or Hi-Fi(ELLEY) make or PANAMA make) mounted

On Metal / PVC/Wooden Box covered with 3 mm thick

Laminated sheet(Laminated Sheet Make:sandek, greenlam,

formica, bloom with ISI mark) with ISI Mark with necessary

Lamp holder/ceiling rose / H.D.Connector(Point Wiring

Box:Make:zaral electrical, yansi, supreme industries, electro

switch gear, D’mark fabrication, sandek, Formica, greenlam

with ISI Mark) as directed as directed for future extention , if

required agency has to erect one higher size box & plate as

per instruction of EIC. cost of blank plate shall be paid as per

tender itemFor Light Point-In existing medium class Rigid

PVC pipe and accessories erected Concealed in wall/ceiling

45b For Fan Point--In existing medium class Rigid PVC pipe and 8.00 Point 291.00 Rupees Two Hundred Ninety One

accessories erected Concealed in wall/ceiling complete Only

45c For loop on switch board (with 6 Amp. Switch & 3/5 pin 15.00 Point 66.00 Rupees Sixty Six Only

socket both having ISI Make)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

46a Providing and fixing Point wiring with 1.1 KV grade ISI 35.00 Point 255.00 Rupees Two Hundred Fifty Five Only

marked approved make 2 x 1.5 sq.mm copper PVC insulated

FRLS wire with 1.5 sq.mm (green) copper PVC insulated

FRLS wire for earth continuity in exiting FIA approved ISI

mark white colour medium class 20/25 mm dia. embossed

rigid PVC pipe erected flushed on wall/ceiling complete with

company fabricated Metal Groove PVC fitting fixed with

adhesive solution erected On wall along with continuous G. I.

fish wire to draw wires complete with approved make 5/6

Amp. tissino type switch and accessories(Anchor(PENTA)

make or Hi-Fi(ELLEY) make or PANAMA make) mounted

On Metal / PVC/Wooden Box covered with 3 mm thick

Laminated sheet(Laminated Sheet Make:sandek, greenlam,

formica, bloom with ISI mark) with ISI Mark with necessary

Lamp holder/ceiling rose / H.D.Connector(Point Wiring

Box:Make:zaral electrical, yansi, supreme industries, electro

switch gear, D’mark fabrication, sandek, Formica, greenlam

with ISI Mark)as directed as directed for future extention , if

required agency has to erect one higher size box & plate as

per instruction of EIC. cost of blank plate shall be paid as per

tender itemFor Light Point-In existing medium class Rigid

PVC pipe and accessories erected flushed on wall/ceiling

46b For Fan Point--In existing medium class Rigid PVC pipe and 17.00 Point 255.00 Rupees Two Hundred Fifty Five Only

accessories erected flushed on wall/ceiling complete

46c For separate Point (with 6 Amp. Switch & 3/5 pin socket both 3.00 Point 223.00 Rupees Two Hundred Twenty Three

having ISI Make)-In existing medium class Rigid PVC pipe Only

and accessories erected flushed on wall/ceiling complete

46d For Bell point---In existing medium class Rigid PVC pipe and 4.00 Point 255.00 Rupees Two Hundred Fifty Five Only

accessories erected flushed on wall/ceiling complete

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

47 Providing & erecting Switch board for Computer or electric 6.00 Each 1122.00 Rupees One Thousand One Hundred

apparatus consisting of following items in single board Twenty Two Only

erected on 20 G. G.I. company fabricated metallic box

erected with appropriate front plate modules erected flushed

with wall as directed. 1 no. 6/16 Amp. universal Socket, 1 no.

13 Amp. international socket, 2 nos. 16 Amp. indicator

switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For

Computer power Supply board. Cat.-III

48a Providing following type of Modular Type Accessories 3.00 Each 159.00 Rupees One Hundred Fifty Nine Only

mounted with 20 G company fabricated metalic box, single

mounting base frame covered with textured / metallic front

plate, modules erected with necessary connection. As desired

by Engineer in charge. Two pin / RJ-11Telephone Socket (For

One Gang) Cat III

48b Modem Jack for Computer Open RJ-45 Cat III 5.00 Each 159.00 Rupees One Hundred Fifty Nine Only

49a Providing & Erecting following Shockproof tissino type 25.00 Each 217.00 Rupees Two Hundred Seventeen

accessories erected on 3 mm thick PC (Polycarbonate) sheet Only

in PVC/ Metal/Wooden Box. erected on wall/ ceiling.For

Electronic Hum free EME Socket Type Steps Fan Regulator

49b One no Single pole 6 A Switch / Bell push 26.00 Each 31.00 Rupees Thirty One Only

50a Providing and erecting ISI mark Medium class RIGID PVC 350.00 Mtr. 24.00 Rupees Twenty Four Only

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed For 20 mm dia.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

50b For 25MM Dia 70.00 Mtr. 33.00 Rupees Thirty Three Only

51a Providing & Erecting Mains with FRLS PVC Insulated wire ISI 950.00 Mtr. 46.00 Rupees Forty Six Only

marked 1.1 KV grade In Existing FIA approved ISI mark

medium class 20/25 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution to be erected on/in

brick wall / slab along with continuous G. I. fish wire to draw

mains laid in approved manner with plastering by cement

mortar & finishing the surface to match the wall / ceiling

complete with FRLS PVC insulated wire for earth continuity.

(Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper

multi stranded conductor mains with 1.5 sq.mm. FRLS

copper multi stranded conductor for earthing as per standard

colour code.(In Existing 20/25mm Pipe) [Wire must be having

box packing](Conductor resistance should be as per

51b For 2 x 2.5 sq.mm. FRLS copper multi stranded conductor 120.00 Mtr. 62.00 Rupees Sixty Two Only

mains with 1.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code. (In

Existing 20/25mm Pipe) [Wire must be having box packing]

(Conductor resistance should be as per IS:8130/1984 )

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

52 Providing & Erecting Mains with FRLS PVC Insulated wire ISI 30.00 Mtr. 146.00 Rupees One Hundred Forty Six Only

marked 1.1 KV grade In FIA approved ISI mark medium

class 20/25 mm dia. embossed rigid PVC pipe with PVC

fitting fixed with adhesive solution to be erected on/in brick

wall / slab along with continuous G. I. fish wire to draw mains

laid in approved manner with plastering by cement mortar &

finishing the surface to match the wall / ceiling complete with

FRLS PVC insulated wire for earth continuity. (Approved ISI

make only) For 2 x 6.0 sq.mm. FRLS copper multi stranded

conductor mains with 2.5 sq.mm. FRLS copper multi

stranded conductor for earthing as per standard colour code.

(with 25 mm dia. PVC pipe) (for MCBDB mains) [Wire must

be having box packing] (Conductor resistance should be as

per IS:8130/1984)

53 Providing & fixing 25 mm. dia PVC corrugated Flexible pipe 60.00 Mtr. 21.00 Rupees Twenty One Only

with necessary socket, PVC bushes saddle,Check-nuts etc.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

54 Providing and fixing Plug Point wiring with 1.1 KV grade ISI 1.00 Point 317.00 Rupees Three Hundred Seventeen

marked approved make 2 x 2.5 sq.mm copper PVC insulated Only

FRLS wire with 1.5 sq.mm (green) copper PVC insulated

FRLS wire for earth continuity in existing FIA approved ISI

mark white colour medium class 20/25 mm dia. embossed

rigid PVC pipe erected flushed on wall/ceiling complete with

company fabricated Metal Groove PVC fitting fixed with

adhesive solution erected On wall along with continuous G. I.

fish wire to draw wires complete with approved make

complete with 16 AmpTissino type Swich and accessories

mounted tissino type switch and

accessories(Anchor(PENTA) make or Hi-Fi(ELLEY) make or

PANAMA make) mounted On Metal / PVC/Wooden Box

covered with 3 mm thick Laminated sheet(Laminated Sheet

Make:sandek, greenlam, formica, bloom with ISI mark) with

ISI Mark with necessary Lamp holder/ceiling rose /

H.D.Connector(Point Wiring Box:Make:zaral electrical, yansi,

supreme industries, electro switch gear, D’mark fabrication,

sandek, Formica, greenlam with ISI Mark) with necessary

Lamp holder/ceiling rose / H.D.Connector as directed as

directed for future extention , if required agency has to erect

one higher size box & modular plate as per instruction of EIC.

cost of blank plate shall be paid as per tender item.(a)

Amp. tissino type Indicator switch & 1 No. 6/16 A tissino type

universal socket white colour suitable for 3 pin top duly both

having ISI mark. (Conductor resistance should be as per

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

55 Providing and fixing Plug Point wiring with 1.1 KV grade ISI 1.00 Point 434.00 Rupees Four Hundred Thirty Four

marked approved make 2 x 4 sq.mm copper PVC insulated Only

FRLS wire with 2.5 sq.mm (green) copper PVC insulated

FRLS wire for earth continuity in existing FIA approved ISI

mark white colour medium class 20/25 mm dia. embossed

rigid PVC pipe erected flushed on wall/ceiling complete with

company fabricated Metal Groove PVC fitting fixed with

adhesive solution erected On wall along with continuous G. I.

fish wire to draw wires complete with approved make

complete with 16 AmpTissino type Swich and accessories

mounted tissino type switch and accessories(Anchor(PENTA)

make or Hi-Fi(ELLEY) make or PANAMA make) mounted

On Metal / PVC/Wooden Box covered with 3 mm thick

Laminated sheet(Laminated Sheet Make:sandek, greenlam,

formica, bloom with ISI mark) with ISI Mark with necessary

Lamp holder/ceiling rose / H.D.Connector(Point Wiring

Box:Make:zaral electrical, yansi, supreme industries, electro

switch gear, D’mark fabrication, sandek, Formica, greenlam

with ISI Mark) as directed as directed for future extention , if

required agency has to erect one higher size box & modular

plate as per instruction of EIC. cost of blank plate shall be

paid as per tender item.(a) 16 Amp. tissino type Indicator

switch & 1 No. 6/16 A tissino type universal socket white

colour suitable for 3 pin top duly both having ISI mark.

(Conductor resistance should be as per IS:8130/1984)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

56 Providing & Erecting 2.0 mtr long Earthing system by making 3.00 Each 7025.00 Rupees Seven Thousand Twenty Five

minimum bore of 225 mm dia in soft soil. Suitable for doing Only

pipe-in-pipe technology earthing.Earthing electric rod must be

made from Corrosion free Hot dip galvanizing pipes having

following specification.

(A)(A) Earthing Electrode: outerpipe:- 88mm minimum O.D

,ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:- 42 mm

minimum O.D, Pipe B Class ISI mark reputed Brand

Terminal Size: 70mm X 100mm length, Terminal Should be

made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal.The hot deep

galvanising must be done after above process.Galvanised

thickness must be minimum 75 micron any where. SS Nut

bolt:- 2 no.with washer suitable for 14mm dia. hole must be

provided at terminal. total minimum Weight(approx.) of earth

electrodewith inside conductive material minimum should be

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt

at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound :-Earthing compound should be

capable to retain moisture for long time Back Filling

Compound weight is 50 Kg. Necessary test report must be

submitted.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

(D) Chamber and cover :-Earthing chamber should be size of Rupees Nil

400mmX400mmX400mm depth and Cover should be heavy

duty cast iron with required size of 300mmX300mmX4mm

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL

accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

laboratory.

4. General test report from OEM regarding specification of

{Make & Model to be approved by EIC) OEM has to submit

all detail & sample for approved before supplying

Water must be poured in bore before starting earthing.

Earthing value must be measured with earth tester. Agency

has to bring the earth resistance to at least 02 ohms & voltage

between neutral &Earthingupto 02 volt. Agency has to

maintain earthing& its value for one year. If required. Earthing

must be done in the presence of A.E (GSPHCL)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

57 Supplying and Erecting LED indoor fitting of approximately 46.00 Each 370.00 Rupees Three Hundred Seventy Only

4feet long with LED of wattage 0.2W to 0.5W assemble on

single MCPCB with housing use as a heat sink shall be made

from Aluminum extrusion having enough strength (sample must

approved by EIC) with polycarbonate diffuser with following

specification:(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD : Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M)Surge protection : Min. 2KV

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be

(Q) Fixing clamp design & strength should be sufficient to hold

the fitting erected on wall or ceiling.

(R) 3 core copper wire of appropriate size with earthing

connector(Note:-The manufacturer/ authorized Channel partner of

the manufacturer has to

submit 4 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

58 Supplying and Erecting 8 W LED Lamps with following 12.00 Each 111.00 Rupees One Hundred Eleven Only

wattage capacity of 220 to 240 voltage, minimum

burning hours life, 500v in built- surge protection,

Polycarbonate diffuser , mounting suitable for E14 / E27 / B22

lamp holders, P.F >=0.5 (A) LED lamps integral type with pc

diffuser suitable LAMP holder.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

59 Providing and erecting max 10 W LED battern having main 3.00 Each 309.00 Rupees Three Hundred Nine Only

housing aluminium extruded and front cover of polycarbonate.

Electrically and photomatry parameters are as under : 240 V,

50 Hz System Wattage 10W+10%, PF>=0.95, system

lumens min, 1000, CCT- 3000K to 6500K, CRI>=80.

THD<=15% Delivery efficiency>=85%, LM 80 certified LED,

30000 Hrs@ L70, Electronic CC driver, insulated copper wire,

for internal wiring, IP20 Operating voltage: 160 to 270 V.

Surge-2 KV, length of this fitting should be 2 ft.

Luminaire efficacy> 85 lumens/watt, LED

LED driver efficiency > 85%

(fitting required LM-79 & LM-80 Certificates) (NOTE : Below

description have shown ranges of Wattage capacity of LED

capacity between the ranges shown.) Tube Light with integral

driver 8 Watts, Surge-2 KV IP-20, conventional 1 to 2 feet

60 Providing and erecting Decorative Ding Dong call bell Stereo 4.00 Each 170.00 Rupees One Hundred Seventy Only

type 250 Volt complete erected on existing polished wooden

block or in M.S. box with 3 mm thick white ISI mark laminated

sheet. (Anchor(chime model),Rider,Vision)

61 Providing and Erecting Polycarbonate body surface mounting 2.00 Each 780.00 Rupees Seven Hundred Eighty Only

LED Bulk head type 9 watt Lighting Fitting with electronic

driver having THD<15%,CRI>80,PF>0.95 And lumen output

from luminaire 800lm , input voltage range 90-300VAC , 50Hz

cool white(3000 to 6500k), inbuilt driver having THO>80

lm/W, -20degC to +60degC working temperature, AL frame

with Beam Angle 120deg

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

62 Providing, erecting, testing ceiling Fan confirming to IS: 25.00 Each 1929.00 Rupees One Thousand Nine Hundred

374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Twenty Nine Only

Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2)

Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4)

Power Consumption: maximum 53W, (5) RPM: minimum

330, (6)Service value:min 4.3 m3/mtr, (7) Class of insulation:

'B', (8) No. of heavy duty premium quality Ball bearing: Two,

(9) Total Body: Top & Bottom should be alluminium, (10)

Blade: Aluminium approx 1.1 mm thick, (11) Colour: White

high grade powder coating, (12) Canopy: Two Nos. Heavy

duty, (13) Condenser: Min. 1.5 MFD (15% tolerance) as per

IS 1709-1984 Branded make,(14) Down road: up to 1.0 mtr

as per site tequirment, (15) Required fixing accessories, (16)

3 core 0.75sq.mm wire as per site requirment,(17) no

vibration and noise due to mechanical parts.(18) Necessary

saftey wire should be erected with fan for safety & checked

with EIC (OEM has to approved model as per tender

specification and tested at ERDA)

63 Providing Fan clamp of 30 x 5 mm flat of required length & 10 32.00 Each 98.00 Rupees Ninety Eight Only

mm M.S. Bolt & Nuts erected with necessary hook of 10 mm

M.S. Round Bar.

64 Supplying and erecting approved make oscillating type 2.00 Each 2509.00 Rupees Two Thousand Five Hundred

bracket fan A.C. 230 V. 50 cy/s 400/450 mm sweep wall Nine Only

mounted with height adjustment and rotary tilting device

complete with guard, flexible Core plug top complete erected

with lead wires as directed.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

65 Supplying and erecting 19 / 20 mm. nominal bore "B" Class 20.00 Rn. Mtr. 107.00 Rupees One Hundred Seven Only

G.I Pipe /M.S. Pipe down rod erected duly painted for fan

complete with necessary 24/0.2 flat 3 core flexible cable with

earthing.The Down rod thickness,hole,locking

arrangement,construction,power coating,colour shed should

be same as original down rod brought with ceiling fan.For that

agency has to give original down road sample to fabricator

and one sample down rod should be approved with EIC .After

approval given by EIC agency can use the down rod as per

approved sample.If without approval down rod will be erect on

site,agency has to replace them with own cost

66 Supplying & erecting approved make low noise Decorative 2.00 Each 1687.00 Rupees One Thousand Six Hundred

exhaust fan having size150/ 200 mm with 1350 RPM with Eighty Seven Only

round / square frame ABS/metalic body with Grill and inbuilt

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

67 Providing and erecting approved make single phase Single Door metal clad 1.00 Each 4901.00 Rupees Four Thousand Nine Hundred

D.B. as per relevant indian standards ammended upto date. Supplying and

fixing following way single phase MCB distrubution board of company

fabricated with sheet box with powder coated inside and outside after apply

seven tank chemical process of CRCA sheet (MCBDB Door, Backside &

Body must be made of 1.2 mm thick CRCA sheet )cover complete with

suitable integral single piece construction tinned copper busbar and link

with all necessary interconnection and with necessary size MS frame for

mounting MCBDB. Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank

Powder coating Certificate (3) Tinned Copper/Brass make neutral &

Earthing link with isolation & Protecting Cover for 240 Volts on surface /

recess complete with loose wire box, terminal connectors for all incoming

and outging circuits, with suitable size FRLS PVC insulated copper

conductor up to terminal blocks and internal connection, tinned coppper

bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including earthing

etc. Single phase incoming and horizontal single phase outgoing. For

Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking

capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to

IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating 6 to

Amp. with NL suitable to operate on 240 Volt A.C. power. (6/25 Amp sp

DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the

external edge with box cutting plaster) (Same colour MCB(SP/DP) should

be used as same as MCBDB) [Including Necessary numbering / marking

on box done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC on site

as per requirement]

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

68 Providing and erecting approved make single phase Single Door metal 1.00 Each 4287.00 Rupees Four Thousand Two Hundred

clad D.B. as per relevant indian standards ammended upto date. Supplying

Eighty Seven Only

and fixing following way single phase MCB distrubution board of company

fabricated with sheet box with powder coated inside and outside after apply

seven tank chemical process of CRCA sheet cover complete with suitable

integral single piece construction tinned copper busbar and link with all

necessary interconnection and with necessary size MS frame for mounting

MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 &

3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder

coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link

with isolation & Protecting Cover for 240 Volts on surface / recess complete

with loose wire box, terminal connectors for all incoming and outging

circuits, with suitable size FRLS PVC insulated copper conductor up to

terminal blocks and internal connection, tinned coppper bus bar, 1 no.

tinned copper neutral link, tinned copper earth bar, din bar, detachable

gland plate, interconnections, powder painted including earthing etc. Single

phase incoming and horizontal single phase outgoing. For 12 Way

MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB confirming to

IS:12640/1988 having sensitivity of 30 mA and breaking capacity of

KA), MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having

breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL

suitable to operate on 240 Volt A.C. power. (6/25 Amp sp mcb rating to be

used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with box

cutting plaster) (Same colour MCB(SP/DP) should be used as same as

MCBDB) [Including Necessary numbering / marking on box done with red

colour radium sticker as per site requirement and instructions given by EIC

on site. Font / number size given by EIC on site as per requirement]

69 providing and erecting Approved make RCCBs conforming to 1.00 Each 2213.00 Rupees Two Thousand Two Hundred

IS: 12640 and having sensitivity of 30 mA and Short Circuit Thirteen Only

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed (ii) 40Amps. DP

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

70 Providing & erecting 240 V MCB Double pole switch for Motor 6.00 Each 327.00 Rupees Three Hundred Twenty

and inductive load (C curve) having 10 KA breaking capacity Seven Only

& confirms to IS:8828 in Existing M.S. box having following

capacity. For 40 Amp DP.

71 Supplying and Erecting Approved make Four pole moulded 1.00 Each 6112.00 Rupees Six Thousand One Hundred

case circuit breaker having breaking capacity ICU of 25 K.A. Twelve Only

at 415 V, having normal current rating 25 A to 100 A. with

Fixed/Variable thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only.

72 Providing and erecting Steel cover as per drawing using 16 6.00 Sq.Mtr. 4187.00 Rupees Four Thousand One Hundred

SWG M.S.sheet of following depth, to house the switch gear Eighty Seven Only

etc. complete with locking arrangement and lock with

duplicate keys per cupboard and door handles erected with

necessary support and painting. [One coat red oxide and two

coat enamel paint](A) with angle iron frame -- (ii) For 40 cms.

73 Providing & erecting Miniature circuit breaker single pole 6 16.00 Each 111.00 Rupees One Hundred Eleven Only

Amp. to 25 Amp. suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark.

74 providing and erecting following additional parts for panel 1.00 Each 865.00 Rupees Eight Hundred Sixty Five Only

mounting MCCBs (A)Extended operating rotary handle with

pad lock with three position trip,off,on suitable for 25A to

A panel mounting

75a Providing & erecting 415 V MCB Four Pole for Motor & 2.00 Each 730.00 Rupees Seven Hundred Thirty Only

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

75b For 40 Amp FP. 2.00 Each 662.00 Rupees Six Hundred Sixty Two Only

76a Supplying & fixing box for housing RCCB + MCB combination 4.00 Each 272.00 Rupees Two Hundred Seventy Two

made of 18 SWG sheet steel duly powder coated with gasket, Only

dust & vermin proof bakelite shield two earthing terminals for

following type of RCCB, RCCB + MCB For 2 Pole

76b For 4 Pole 4.00 Each 442.00 Rupees Four Hundred Forty Two Only

77 Supplying & erecting 12 mm thick backelite sheet of approved 2.00 Sq. Mtr. 2289.00 Rupees Two Thousand Two Hundred

make and grade on 25 x 25 x 3 mm red oxide painted angle Eighty Nine Only

iron frame suitable for fixing ICDP SWITCH and energy

meter (contractor shall make approved drawing of Bakelite

sheet To arrange required No. of Energy meter & ICDP switch

-busbar etc. as per Actual space available in electrical room

78 Providing and erecting metallic vitrified danger notice board 2.00 Each 69.00 Rupees Sixty Nine Only

as per language suggested by engineer incharge for MEDIUM

VOLTAGE installation to be erected as per IS-2551.

79a Supplying and laying UPVC cable trunking system comprising 20.00 Mtr. 275.00 Rupees Two Hundred Seventy Five

unplasticised polyvinyl, chloride rigid material with ignition free Only

& flame proof confirming BS .All necessary accessories and

measuring of following sizes. For 75 mm x 50 mm trunking

(MK/ LEGRAND / OBO)

79b For 50 mm x 50 mm trunking(MK/ LEGRAND / OBO) 40.00 Mtr. 187.00 Rupees One Hundred Eighty Seven

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

80 SITC of specified make Cat - 6 voice /data cable to be 35.00 Mtr. 47.00 Rupees Forty Seven Only

done in prelaid PVC pipe / raceway , but without the cost of

raceway or pipe ( the wire is to be drawn from MFD/ JB to

outlet point) (a) CAT - 6-Y Colour ( For Voice Cabling ) & X -

Colour(For Computer Data Cable ) (

Molex/Avaya/Systimax/Legrand make)

81a Supplying & erecting approved make SMC press moulded 6.00 Each 510.00 Rupees Five Hundred Ten Only

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN rail

for mounting mob & hinged doors as per requirement having

locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps&

earth bolt of following size of box.a) For 250mm x 200mm x

100mm [deep] (Street light)

81b For 140mm x 140mm x 100mm [deep] (If required) 6.00 Each 295.00 Rupees Two Hundred Ninety Five

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

82 For Wall & Terrace Street light Bracket:Providing and Fixing 6.00 Each 487.00 Rupees Four Hundred Eighty Seven

of wall and terrace bracket consisting of ISI mark "B" class Only

G.I. Pipe 4.2 cm outside diameter and length suitable for

building face for fixing the brackets and having spread of

Upto 0.70 mtr. length with suitable degree angle as per site

situation suggested by EIC. vertical plane and suitable welded

stiffner reducer and nipple with check nut complete painted

with one coat of red oxide and two coats of alluminium paint

(Zinc Coating before alluminium Paint is mandatory)with .

complete with 150*150*2mm thick G.I plate with 4no heavy

duty galvanized jasti khila of required size or Single arm

bracket (pipe in pipe type) suitable for terrace as per design

given by EIC Considering parfait, height ,width and total

height of building and type of led fitting .

(a) For single arm bracket. (Jindal / Asian / Tata / Surya

Prakash make Only) (Fabricators:- Ambica / Fab / Bajaj /

Impression equipment Only) (Test certificate to be submitted)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

83 SITC of Outdoor aesthetically designed LED Street Light 6.00 Each 3512.00 Rupees Three Thousand Five

Luminaire with total consumption of Max. 45 W with single Hundred Twelve Only

piece die cast aluminium housing, high power LED shall be

mounted on high quality metal core PCB with extremely

precison designed heat sink complete with IP66 protection

Class with polycarbonate / thoughened glass cover the fixture

should be suitable for pole/bracket mounting. The fixture to

comply both LM79 and LM 80 guidelines with LED module

min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs,

provided with high quality polycarbonate lenses for better light

distribution. The Fixture Should be able to be Pole Mounted

and also bracket mounted, provided with high quality driver for

protection against high and low Voltage cut Off, opertional for

high amibient and high humid envirnoments, THD of driver

should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias Oprating range

Voltage 160 to 270 V, system efficiency >= 110 lm/w, and

total lumens not less then 4950, CCT > 5000K, CRI >

beam angle 120 deg, 4kV integral & non integral surge

immunity level at least 10 KV.The Separate Potted driver

should have over current, over voltage protection, short circuit

protection so that the fixture recovers once the fault is

removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH. (Note:- The

manufacturer/authorized Channel partner of the manufacturer

has to submit 4 yrs free replcement Guarantee for complete

84 Providing & Erecting Univesal Astro interlligent Street light 1.00 Each 12895.00 Rupees Twelve Thousand Eight

Control System insu with weather proof box for indoor Hundred Ninety Five Only

allplication 5KVA ( as Per atteched Specification)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

85 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked 100.00 Mtr. 361.00 Rupees Three Hundred Sixty One

armoured Copper cable for 1100 volt to be laid 90 cms. Under Only

ground or to be laid on wall with suitable G.I. heavy guage

1.0mm thick cable clamp or in existing DWC pipe

underground or road crossing or floor. (a) For 4 core x

86 Providing & fixing Solderless crimping type Copper lugs 50.00 Each 8.00 Rupees Eight Only

conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved

manner. [a] 1.5/2.5 to 6 Sq.mm

87 Providing & fixing Double compressed heavy duty flange type 12.00 Nos. 43.00 Rupees Forty Three Only

brass cable gland with rubber ring for P V C insulated

armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm

(Sigma, MCI, Comet, HMI Make Only)

88 Providing & Erecting Flexible PVC insulated multistrand 150.00 Mtr. 46.00 Rupees Forty Six Only

multicore 1.1 kv grade ISI marked copper wires of following

size to be erected as directed. 3 core 1.5 sq.mm. PVC

insulated round copper wire ISI mark.

89a Providing & Erecting Mains with ISI marked, 1.1 KV grade 100.00 Mtr. 56.00 Rupees Fifty Six Only

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS:694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. [f] One wire 6.00 sq. mm

89b For One wire 16.00 sq. mm 180.00 Mtr. 141.00 Rupees One Hundred Forty One Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

90 Providing & laying HDPE Double walled corrugated pipes 40.00 Mtr. 117.00 Rupees One Hundred Seventeen

(DWC) (conforming to IS: 16205 (part 24) 2018)) with Only

minimum load required of 450N capacity with anti rodent and

ultra violet material properties with necessary connecting

accessories of same material at required depth to be laid

cms. under ground for laying of cable below ground / road

surface for enclosing cable and back filling the same to make

ground as per original. (A) For Outer dia. 50 mm and Inner

dia. 38 mm. (Test Certificate to be Submitted)

91 Providing and erecting required size Copper strip for earthing 20.00 KG 787.00 Rupees Seven Hundred Eighty Seven

of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. Only

using copper clamp.

92 Providing, erecting, fabricating the M.S. structure as per 10.00 Kg. 75.01 Rupees Seventy Five And Paise One

requirement of site as per structure design Including proper Only

size approved by EIC of M.S. angles, flats, bars, square pipe,

channels, sections (Tata, Jindal, Asian, JSI Make) complete

with cutting, welding, grinding and finishing duly painted with

Asian/Nerolac make premium quality oil paint and true care

red oxide metal primer,asian paint make with erection on site

as per direction of engineer in charge with necessary grouting

cementing, plastering and finishing complete. All hole opening

of square pipe end must be closed with M.S plate welding.

Payment will be done on KG as per Actual weight.

93 Carry out RCC Core cutting- up to 100 mm dia./300mm thick 2.00 Each 1534.00 Rupees One Thousand Five Hundred

Wall/beam/slab with providing PVC pipe of 3 mm thick inside Thirty Four Only

and necessary finishing on both ends of wall .

94 Providing & Erecting 3mm thick laminated sheet with grooving 60.00 Sq.inch 2.00 Rupees Two Only

as directed.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

95 Dismantling the existing light, fan, bell, independent plug 90.00 point 1.00 Rupee One Only

point, wiring with mains of all types along with accessories

etc. complete and handed over to dept.

96 Dismantling the existing switchgears, DB and Busbar of any 5.00 Each 7.00 Rupees Seven Only

size complete with / without board or angle iron frame.

97 Dismantling the existing any type of indoor light fittings 50.00 Each 5.00 Rupees Five Only

98 Dismantling the existing ceiling fan / exhaust fan / cabin fan / 23.00 Each 9.00 Rupees Nine Only

bracket fan complete with accessories, G.I. down rod, frame

etc. and making the site clear.

Signature of Contractor Executive Engineer

GSPHCL Surat