Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹14.6 Cr
EMD Value
₹24.6 L
Closing Date
13 Apr 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Construction of Shopping Mall in the old jail complex on the Northern side of the Goubert Market at Puducherry including Civil Electrical Plumbing Fire Fighting HVAC Works PA System CCTV surveillance IT enabled services Rainwater Harvesting Horticulture and Landscaping Provision of solar systems Other External Development work STP Septic Tank and other allied services etc and Incorporation of smart city features
NBCC/SBG/South/SmartCity/Pudchry/Works/2023/30~EWe17bfce80d5013082c622c73
NBCC/SBG/South/SmartCity/Pudchry/Works/2023/30
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹24.6 L
13 Apr 2023
18 Mar 2023
13 Apr 2023
18 Mar 2023
13 Apr 2023
ABSTRACT OF COST
Estimate Cost Including
SI No. Description
GST @ 18% (Rs.)
1 Civil Works 11,92,19,260.00
2 Water Supply Plumbing & Sanitary Works 12,32,755.00
3 Fire Fighting System 96,01,663.00
5 Air Ventilation Arrangements 5,16,535.00
6 Electrical Works 1,49,86,446.00
Total Amount including GST : 14,60,71,139.00
Total Amount including GST : 14,60,71,139.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Earth work excavation above water level and depositing on bank in sandy silt or other soil,
wet sand or silt, light black cotton soil or clay, sandy loam & ordinary soil for I.C's man hole,
well, infiltration, suction well including driving shoring materials etc. for excavation purpose
and removing the shoring materials and refilling the trenches with excavated earth
complying with standard specification., complete - For first depth of 2 metres (using close
Earth work excavation above water level and depositing on bank in sandy silt or other soil,
wet sand or silt, light black cotton soil or clay, sandy loam & ordinary soil for I.C's man hole,
well, infiltration,suction well including driving shoring materials etc. for excavation purpose
and removing the shoring materials and refilling the trenches with excavated earth
complying with standard specification., complete - For Second depth of 2 metres (using close
Earth work excavation above water level and depositing on bank in sandy silt or other soil,
wet sand or silt, light black cotton soil or clay, sandy loam & ordinary soil for I.C's man hole,
well, infiltration, suction well including driving shoring materials etc. for excavation purpose
and removing the shoring materials and refilling the trenches with excavated earth
complying with standard specification., complete - For Third depth of 2 metres (using close
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
4 2.8.1 dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated Cum 677.00 161.59 1,09,396.00
soil and disposal of surplus excavated soil as directed, within a lead of 50 m for all kinds of
As per Item 1 with Extra for every additional lift of 1.5 m or part thereof in excavation /
banking excavated or stacked materials. All Kinds Of Soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.
6 2.25 in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and Cum 636.00 143.28 91,123.00
watering, lead up to 50 m and lift upto 1.5 m.
Carriage Of materials by mechanical transport icludig loading and un loading and stacking
7 charges beyond 5km to 10km( Earth Lime,Moorum,Gravel Surki,building rubbish and brick Cum 8007.00 166.93 13,36,645.00
Supplying chemical emulsion in sealed containers including delivery as specified .
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
1 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite
treatment (excluding the cost of chemical emulsion) - tratment of soil under existing flooors
9 2.35.3.1 using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm Sqm 1946.00 191.58 3,72,824.00
diametre holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the
existing floor - with Chlorpyriphos / lindane E.C. 20% with 1% concentration -
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing
treatment to the RCC structures like retaining walls of the basement, water tanks , roof slabs,
podiums, reservior , sewage & water treatment plant , tunnels / subway and bridge deck etc.,
prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for
vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal
surfaces and applying the same from negative (internal) side with the help of synthetic fiber
brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by
reducing permeability of concrete by more than 90% compared with control concrete as per
DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry
shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried
out all complete as per specification . The product performance shall carry guarantee for 10
years against any leakage - For Vertical surfcae two coats @ 0.70 kg per sqm
Supplying and filling with gravel (excluding rock) in trenches , plinth, sides of foundations
11 2.27A.1 etc . In layers not exceeding 20 cm in depth consolidating each deposited layers by ramming Cum 807.00 747.16 6,02,962.00
and watering etc .complete including all lead and lift
Supplying and filling in plinth with sand under floors, including watering, ramming,
consolidating and dressing complete.
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge
13 24.7 pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Cum 11.00 780.42 8,585.00
Engineer -in-charge.
Supplying , filling , spreading & leveling stone boulders of size rage 5 cm to 20 cm,inrecharge
pit, in the required thickness, for all leads & lifts , all complete
Supplying, filling, spreading and levelling gravels of size range 5 mm to 10 mm , in the
15 24.6 recharge pit, over the existing layer of boulders , in required thickness for all leads and lifts , Cum 3.00 780.42 2,341.00
Gravel packing in tubewell construction in accordance with IS :4097, including providing
16 24.8 gravel fine / medium / coarse, in required grading and sizes as per actual requirement , of Cum 3.00 811.56 2,435.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
2 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supplying , filling , spreading & leveling Brick aggregate (single size):40mm nominal size
,inrecharge pit, in the required thickness, for all leads & lifts , all complete
Supplying , filling , spreading & leveling Stone aggregate (single size):20mm nominal size
,inrecharge pit, in the required thickness, for all leads & lifts , all complete
Providing and laying sand gravel mix 1:1 of 150mm consolidated thickness using 0.68cum of
sand & 0.62cum of gravel for 1cum finished to a soaked CBR value of minimum 20 including
cost and conveyance of sand and gravel to the work site and stacking to the standard
departmental gauge for premeaurement, mixing the required quantities of sand and gravel,
spreading watering and consolidation the mix by power roller rolling to achive the required
proctor density including the labour charges for mixing, spreading, hire and fuel charges for
power roller and all other tools and plants employed etc., complete. As per clause no 401 of
MOT specification
Providing and laying 60mm thick factory made cement concrete interlocking paver block of
M-30 grade made by block making machine with strong vibratory compaction and of
approved size and design / shape laid in required colour and pattern over and including
50mm thick compacted bed of course sand , filling the joints with coarse sand etc. all complte
Providing and laying in position cement concrete of specified grade excluding the cost of
21 4.1.8 centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 Cum 328.00 4,907.68 16,09,719.00
graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of
22 4.1.8 centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 Cum 73.00 4,907.68 3,58,261.00
graded stone aggregate 40 mm nominal size) For Road Works
Providing and laying in position cement concrete of specified grade excluding the cost of
23 4.1.2 centering and shuttering - all work upto plith level - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 Cum 3.00 472.00 1,416.00
graded stone aggregate 20mm nominal size)
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone
aggregate 20 mm nominal size derived from natural sources
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
3 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supplying & laying of drainage composite for use behind walls, between two different fills,
alongside drains of road, below concrete lining of canals etc. having thermobonding a
draining core - HDPE geonet comprises of two sets of parallel overlayed ribs integrally
connected to have a rhomboidal shape with a polyethylene film and a nonwoven geotextile
having mass per unit area 130 gsm and tensile strength of 8.0 kN/m that will be working as
separation or protecting layer, geocomposite having in plane flow capacity of 0.7 L / (m.s) at
hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 13.5 kN/m , with mass per
unit area of 830 gsm, at easily accessible location including top and bottom, with all leads
and lifts, manpower and machinery, materials, labour etc. complete and as directed by
Engineer - In - Charge.
Centering and shuttering including strutting, propping etc. and removal of form for all
Centering and shuttering including strutting , propping etc and removal of form for -
foundations, footings, bases of columns etc for mass concrete
Centering and shuttering including strutting , propping etc and removal of form for - Lintels ,
beams , plinth beams , girders , bressumers and catilevers
Centering and shuttering including strutting , propping etc and removal of form for -
Columns , Pillars , Piers , Abutments , Posts and Struts
Centering and shuttering including strutting , propping etc and removal of form for -
Suspended floors , roofs , landings , balconies and access platform
Centering and shuttering including strutting , propping etc and removal of form for - Stairs ,
(excluding landings) except spiral -staircases
Centering and shuttering including strutting , propping etc and removal of form for - Walls
(any thickness ) including attached pilasters , butteresses , plinth and string courses etc.
Extra for additional height in centering , shuttering where ever required width adequate
bracing , propping etc. including cost of de - shuttering and decentering at all levels , over a
27 5.11.1 height of 3.5m, for every additional height of 1metre or part thereof (plan area to be Sqm 1139.00 233.63 2,66,103.00
measured) - Suspended floors, roofs, landing , beams and balconies (Plan area to be
Providing , hoisting and fixing upto floor five level precast reinforced cement concrete in
lintels, beams, and bressumers including setting in cement mortar 1:3 (1 cement : 3 coarse
sand) , cost of required centering and shuttering but excluding the cost of reinforcement with
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
4 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Reinforced Cement Concrete in substructure complete as per drawing and technical
29 13.5E.1.1 specification -RCC Grade M20 with a minimumcement content 347 kg / cum up to 5m cum 116.00 7,855.77 9,11,269.00
height -Using concrete mixer
Providing and laying in position machine batched and machine mixed design mix M-25 grade
cement concrete for reinforced cement concrete work , using cement content as per
approved design mix , including pumping of concrete to site of laying but excluding the cost
of centering , shuttering , finishing and reinforcement , including admixtures in
recommended proportions as per IS : 9103 to accelerate, retard setting of concrete , improve
workability without impairing strength and durability . Note:- Cement content considered in
this item is @ 330 kg / cum. Excess or less cement used as per design mix is payable or
recoverable separately. - All work upto plinth level
Providing and laying in position machine batched and machine mixed design mix M-25 grade
cement concrete for reinforced cement concrete work , using cement content as per
approved design mix , including pumping of concrete to site of laying but excluding the cost
of centering , shuttering , finishing and reinforcement , including admixtures in
recommended proportions as per IS : 9103 to accelerate, retard setting of concrete , improve
workability without impairing strength and durability . Note:- Cement content considered in
this item is @ 330 kg / cum. Excess or less cement used as per design mix is payable or
recoverable separately. - All work above plinth level upto floor V level
Extra for providing richer mixes at all floor levels - Note:- Excess / less cement over the
specified cement content used is payable / recoverable separately - Providing M-30 grade
concrete instead of M-25 grade BMC / RMC . (Note:- cement content considered in M-30 is @
Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in
33 5.22.6 position and binding all complete upto plinth level - Thermo -Mechanically treated bars Kg 384798.00 94.13 3,62,20,497.00
(TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more
Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in
34 5.22A.6 position and binding all complete above plinth level - Thermo -Mechanically treated bars Kg 162591.00 94.13 1,53,04,463.00
(TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more
Providing anticorrosive treatment to HYSD reinforcement with fusion bonded epoxy coating
the rate includes cost of anticorrosive coating including cost of powder , sand blasting,
35 5.22.8 cleaning , induction , heating , depreciation of machinery etc, wastage in cut length of bars , Tonne 372.00 15,397.14 57,27,734.00
provision of wooden battens between rows of coated bars , cover to work bush pins / bar
bending machines etc - for bars of 20mm to 32 mm diametre - conforming to IS 13620 -1993
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
5 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing anticorrosive treatment to HYSD reinforcement with fusion bonded epoxy coating
the rate includes cost of anticorrosive coating including cost of powder , sand blasting,
36 5.22.9 cleaning , induction , heating , depreciation of machinery etc, wastage in cut length of bars , Tonne 170.00 20,447.41 34,76,059.00
provision of wooden battens between rows of coated bars , cover to work bush pins / bar
bending machines etc - for bars of 8mm to 16 mm diametre - conforming to IS 13620 -1993
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in
foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
Supplying and applying bituminous solution primer on roof and / or wall surface at 0.24 litre
Providing and laying autoclaved aerated cement blocks masonry with
150mm/200mm/230mm/300mm thick AAC blocks in super structure above plinth level up
39 6.47 to floor V level with RCC band at sill level and lintel level with approved block laying polymer Cum 338.00 8,208.01 27,74,307.00
modified adhesive mortar all complete .(The payment of RCC band and reinforcement shall
be made for seperately).
Provding and laying autoclaved aerated cement blocks masonry with 100mm thick AAC
blocks in superstructure above plinth level upto floor five level in cement mortar 1:4 (1
cement : 4 coarse sand) . The rate includes providing and placing in position 2 nos 6 mm dia
M.S.bars at every third course of masonry work.
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing
treatment to the RCC structures like retaining walls of the basement, water tanks , roof slabs,
podiums , reservior , sewage & water treatment plant , tunnels / subway and bridge deck
etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water)
for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal
surfaces and applying the same from negative (internal) side with the help of synthetic fiber
brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by
reducing permeability of concrete by more than 90% compared with control concrete as per
DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline
slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be
carried out all complete as per specification . The product performance shall carry guarantee
for 10 years against any leakage - For Vertical surfcae two coats @ 0.70 kg per sqm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
6 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing and fixing double glazed hermetically sealed glazing in aluminium windows,
ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air
42 21.10 gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant sqm 244.00 3,535.36 8,62,628.00
(Both primary and secondary sealant) etc. as per specifications, drawings and direction of
Engineer-in-charge complete.
43 13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand) sqm 4628.00 180.67 8,36,140.00
44 13.8.3 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand) sqm 5095.00 218.45 11,13,020.00
12mm cement plaster finished with a floating coat of neat cement of mix - 1:3 (1 cement :3
Finishing walls with premium acrylic smooth exterior paint with silicone additives of
46 13.47.1 required shade - New work (two or more coats applied @1.43 ltr / 10 sqm over and Sqm 3954.00 146.64 5,79,809.00
including priming coat of exterior primer applied @ 2.20 kg / 10sqm)
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to
prepare the surface even and smooth complete.
Applying one coat of water thinnable cement primer of approved brand and manufacture on
wall surface : Water thinnable cement primer
Wall painting with plastic emulsion paint Royal of approved brand and manufacture to give
an even shade - two or more coats on new work
Finishing walls with textured exterior paint of required shade - New work (Two or more
50 13.45.1 coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer Sqm 1532.00 190.83 2,92,351.00
applied @ 2.20 kg / 10 sqm
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or
51 13.46.1 more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer Sqm 648.00 130.40 84,500.00
applied @ 2.20 kg/10 sqm)
Providing wood work in frames of doors , windows, clerestory windows and other frames ,
52 9.1.2V wrought framed and fixed in position with hold fast lugs or with dash fasteners of required Sqm 1.00 1,57,991.51 1,57,992.00
dia & length (hold fast lugs or dash fastener shall be paid for separately) -vengai wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows, and
clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required
size with necessary screws, excluding panelling which will be paid for separately , all
complete - Kiln seasoned and chemically treated Vengai wood - 35 mm thick shutters
Providing and fixing bright finished brass butt hinges with necessary screws etc complete -
125 X 85 X 5.5 mm (heavy type)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
7 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc
complete - 200 x 10 mm
Providing and fixing bright finished brass door latch with necessary screws etc complete -
Providing and fixing bright finished brass hanging type floor door stopper with necessary
screws, etc. complete.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door
closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg
to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with
necessary accessories and screws etc. complete.
59 9.81.1 Providing and fixing bright finished brass handles with screws etc complete - 125 mm Each 16.00 247.76 3,964.00
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with
G.I.beading made out of 1.6mm thick G.I.Sheet (zinc coating not less than 120 gm / sqm) of
srewed with M4 X38mm SS screws at distance 75mm from the edge and 150 mm c/c ,
including applying a coat of approved fire resistanr primer / powder coating not less than 30
micron on G.I.beading and special ceramic tape of 5 x 20mm size etc complete in all respect .
The glass shall be clear , toughened , interlayered , non-wired fire
resistant having 11mm thickness of approved brand with 120 minutes of fire resistance both
integrity and radition control (EW
120) and minimum 15 min of insulation (E115) and having a sound reduction of 37dB and LT
of 86% .Glass shall be compliant to
class 2 (B)2 category of Impact resistance as per EN12600. The glass should be manufactured
in UL & TUV audited Facility and including UL-EU Certification. The maximum glazing size
cannot be more than 1100 mm x 2200 mm(wxh) or 2.42 sq.mts in total area. The test report
for the complete system (Glazed Door or Partition)
will be considered valid only if it contains the stamp and signature of the authorized
signatory from the glass manufacturer.(Actual glass size id to be measured at site for
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
8 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating
confirming to IS:3614(Part II) or EN1634-1:1999, tested and certified as Providing and fixing
60 mm thick glazed sqm 6,844.53 fire resistant door shutters of 120 min
Fire Rating confirming to IS:3614(Part II) or EN1634-1:1999, tested and certified as per
laboratory approved , with suitable mounting on door frame , consisting of vertical styles, top
rail & side rail 60mm
x 60mm wide and bottom rail of 110 mm x 60mm made out of 1.6mm thick G.I.sheet (zinc
coating not less than 120gm/ sqm) dully filled mineral wool insulation having density min 96
kg / sqm and fixing with necessary stainless steel ball bearing hinges of size100x89x3mm of
approved make , including applying a coat of approved fire resistant primer of powder
coating not less than 30 micron etc all
complete(panelling to be paid for seperately)- Door size -1710 x 2050 mm.
Providing and fixing fire resistant door frame of section 50x 60 mm on horizontal side & 35 x
60 mm on vertical sides having built in rebate made out of 1.6mm thick GI sheet (Zinc
Coating not less than 120gm / sqm) suitable for mounting 120 min Fire Rated Glazed Door
Shutters. The frame shall be filled with Mineral wool Insulation having density min
96Kg/cum. The frame will have a provision of G.I.Anchor fastners 14 nos (5 each on vertical
style and 4 on horizontal style of size M10 x 80) suitable for fixing in the opening along with
Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire
rated glazed shutter. The frame shall be finished with a approved fire resistant primer of
Powder coating of not less than 30 micron in desired shade (Cost of SS ball bearing hinges is
excluded).- Door size -1710 x 2050 mm.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
9 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators
comprising of uPVC multi-chambered frame and mullion (where ever required) extruded
profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from
roll forming process of required length (shape & size according to uPVC profile), , uPVC
extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm
size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless
steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion
63 9.147B.1 (if required) shall be also fusion welded including drilling of holes for fixing hardware's and Sqm 3.00 6,409.64 19,229.00
drainage of water etc. After fixing frame the gap between frame and adjacent finished wall
shall be filled with weather proof silicon sealant over backer rod of required size and of
approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
(Single / double glass panes and silicon sealant shall be paid separately) - Fixed
window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both
having wall thickness of 1.9 + or -0.2 mm and single glazing bead of appropriate dimension.
(Area upto 0.75 sqm) Fixed window size - 1.20x0.50 m
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness
of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with
2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame
64 9.119 profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket Rm 55.00 462.67 25,447.00
weather seal to be provided through out the frame. The door frame to be fixed to the wall
using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and
direction of Engineerin-Charge.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
10 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing and fixing factory made panel PVC door shutter consisting of frame made out of
M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top
& bottom rails. M.S. frame shall have a coat of steel primers of approved make and
manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30
mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in
45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of
which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form
top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm
shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided
both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as
gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in
the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm
wide PVC sheet beadingon inner side, and joined together with solvent cement adhesive. An
additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C'
Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified
by the manufacturer), of commercial quality conforming to IS : 15622, of approved make
66 11.37.2 (Bell / Johnson / Regency / Somany / Naveen / Asian) in colours such as white, Ivory, Grey, Sqm 61.00 856.62 52,254.00
Fume red brown ,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),
including pointing the joints with white cement and matching pigment etc., complete
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by
applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement
compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second
layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @
0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing
for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints,
corners, junctions of pipes and masonry with polymer mixed slurry.
40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34
mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5
mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or
68 11.9.6 greenmarble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder Sqm 2920.00 709.03 20,70,358.00
mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble
powder mix : 7 marble chips) by volume, including cement slurry etc. complete :Ordinary
cement without any pigment
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
11 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing and laying vitrified floor tiles of size 600 x600 mm (thickeness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of
69 11.41.2 approved make , in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : Sqm 688.00 1,278.99 8,79,945.00
4 coarse sand) , including grouting the joints with white cement and matching pigments etc.,
complete - size of tile600x600mm
Providing and laying flamed finish granite stone flooring in required design and patterns, in
linear as well as curvilinear portions of the building all complete as per the architectural
drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4
70 8.12 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white Sqm 881.00 2,538.10 22,36,064.00
cement slurry admixed with pigment of matching shade including rubbing, curing and
polishing etc. all complete as specified and as - flamed finish granite stone slab Jet black ,
Cherry red, Elite brown, Cat eye or equivalent
71 11.24 Extra for pre finished nosing to treads of steps of granite slabs. RM 458.00 452.42 2,07,210.00
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness
to be specified by the manufacturer) , of approved make (Jhonson / Asian / Somany / Nitco)
in all colours , shades of size 300 x 450 mm as approved in skirting , risers of steps and dados,
over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey
cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of
matching shade complete - size 300x450 mm
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat
73 13.48.2 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of Sqm 40.00 115.25 4,610.00
approved brand and manufacture
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat
74 13.48.3 applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of Sqm 56.00 115.05 6,443.00
approved brand and manufacture.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats,
75 9.48.1 square or round bars etc. including priming coat with approved steel primer all complete. Kg 1994.00 153.72 3,06,515.00
Fixed to steel windows by welding .
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,
plates etc., including welding, grinding, buffing, polishing and making curvature (wherever
required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c
fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel
bolts etc., of required size, on the top of the floor or the side of waist slab with suitable
arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of
stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,
fasteners etc.).
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
12 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
"Providing , supplying fixing & cladding of sqm 4,799.22 aluminium rollcoated composite
panel 3 mm thick material having more than 70 % of PVdf with all coatings not exceeding
AAMA at 605.2-requirements , with anti-toxic low density polythene having aluminium
coated with chrome or polyester , polyvinylidien fluoride of HY lar 5000 in ausimont USA &
kynar 500 in Elf - Atosem will be fixed on the anodized aluminium extruded section
strucutral frame for a wall panelling work with required projection by using MS -cleats /
angles / aluminium 'L' angles and grooves , in ACP folding as per site requirement whereever
necessary. The plain ACP folding will be reinforced by using type system.
Design supply & installation of suspended Spider Glazing system designed to withstand the
wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-
316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear
toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with
laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected
to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the
bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather
sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic
contacts, all complete to perform as per specification and approved drawings. The complete
system to be designed to accommodate thermal expansion & seismic movements etc. The
joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the
assembly to be filled with non staining weather sealant, so as to make the entire system fully
water proof & dust proof The rate shall include all design, Engineering and shop drawing
including approval from structural designer, labour, T&P, scaffolding, other incidental
Providing and laying soft Korean grass turfing including supplying red earth,manure, river
79 11.30 sand, labour charges for ground preparation spreading earth and manure transportation of Sqm 541.00 955.29 5,16,813.00
all and maintaining the lawn for initial three months etc. complete.
Providing and fixing in position 12 mm thick bitumen impregnated fibre board conforming
to IS : 1838 , including cost of m primer , sealing compound in expansion joints
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
13 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing and fixing false ceiling at all height including providing and fixing of frame work
made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of
120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm
wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one
flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,
other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with
81 12.45.2 nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. Sqm 1282.00 1,258.10 16,12,890.00
channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the
ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each
having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular
to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long
G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high
having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with
Fencing with angle iron post placed at required distance embedded in cement concrete
blocks, every 15th post, last but one end post and corner post shall be strutted on both sides
and end post on one side only and provided with horizontal lines and two diagonals
82 16.18.1 interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), Rm 1014.00 16.31 16,536.00
between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of
posts, struts, earth work and concrete work to be paid for separately). Payment to be made
per metre cost of total length of barbed wire used With G.I. barbed wire
Supplying at site Angle iron post & strut of required size including bottom to be split and
83 16.19 bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. kg 600.00 87.56 52,534.00
Providing and fixing in position 12 mm thick bitumen impregnated fibre board conforming
to IS : 1838 , including cost of m primer , sealing compound in expansion joints
Supplying and fixing rolling shutters of approved make, made of required size M.S.laths,
interlocked together through their entire length and jointed together at the end by end locks ,
mounted on specially designed pipe shaft with brackets, side guides and arrangements for
85 10.6.2 inside and outside locking with push and pull operation complete, including the cost of Sqm 244.00 3,253.54 7,93,865.00
providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile
steel wire of adequate strength conforming to ISS :4454 -part 1 and M.S.top cover of required
thickness for rolling shutters - 80 x 1.20mm M.S.laths with 1.25 mm thick top cover
86 10.7 Providing and fixing ball bearing for rolling shutters. Nos 16.00 397.54 6,361.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
14 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Wiring or light point / fan point / exhaust fan point / call bell per point with 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable in surface / recessed medium class pvc
conduit , with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable etc.as required - GROUP C
88 1 x 125w MH/SVL Sonora post top/gate light lantern Nos 63.00 3,156.80 1,98,878.00
Sub Total For Civil Works = ############
WATER SUPPLY AND SANITARY ARRANGEMENTS
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) -
25mm nominal bore
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) -
32mm nominal bore
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the
91 18.11.1 walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting metre 95.00 423.47 40,229.00
chases and making good the wall : 15 mm dia nominal bore
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm
Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps, 32 mm C.P.
brass waste of standard pattern, including painting of fittings and brackets, cutting and
making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm
with a pair of 15 mm C.P. brass pillar taps
94 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make. Each 8.00 797.88 6,383.00
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal
basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing
95 17.4.1 cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps Each 4.00 4,480.96 17,924.00
complete, including painting of fittings and brackets, cutting and making good the walls and
floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
Providing and fixing white vitreous china pedestal type water closet (European type) with
seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with
fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved municipal design complete, including
painting of fittings and brackets, cutting and making good the walls and floors wherever
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
15 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100 mm Sand
Cast Iron P or S trap, 10 litre low level white P.V.C flusing cistren, including flush pipe ,
manually controlled device (handle lever) conforming to IS : 7231 , with all fittings and
fixtures complete , including cutting and making good the walls and floors wherever
required. White vitreous china Orissa pattern W.C.pan of size 580x440mm with integral type
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as
approved by Engineer in charge.
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of
99 18.74.2 approved quality and colour. 18.74.1 15 mm nominal bore with 30cm length 15 mm nominal Each 8.00 81.90 655.00
bore with 45 cm length
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved
quality conforming to IS:8931 15mm nominal bore
Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B)
101 19.33.1 conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 metre 30.00 355.10 10,653.00
leaving 10mm gap for thermal expansion - single socked pipes -110mm diametre
Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B)
102 19.33.2 conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 metre 50.00 217.47 10,874.00
leaving 10mm gap for thermal expansion - single socked pipes -75mm diametre
Providing and fixing in position UPVC fabricated bend (Finolex / jain)(0.6 Mpa) conforming
103 to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials
Providing and fixing in position UPVC fabricated bend (Finolex / jain)(0.6 Mpa) conforming
104 to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials
Providing and fixing in position UPVC fabricated bend (Finolex / jain)(0.6 Mpa) conforming
105 to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials
Digitally signed by
b 31.166.1I 110mm Each DEEPAK
16 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
106 Providing and Fixing of PVC floor trap 75 MM Each 14.00 791.78 11,085.00
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick
masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the
107 19.4.1.1 weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per Each 5.00 1,574.77 7,874.00
standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the
pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step
CPVC solvement cement and the cost of cutting chases and making good the same including
testing of joints complete - Concealed work , including cutting chases and making good the
wall etc - 32 mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the
pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step
CPVC solvement cement and the cost of cutting chases and making good the same including
testing of joints complete - Concealed work , including cutting chases and making good the
wall etc - 25 mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing
110 18.7.5 the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step Rmt 50.00 510.55 25,528.00
CPVC solvent cement and testing of joints complete - internal work - exposed on wall - 40mm
nominal outer dia pipes
Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing
111 18.7.6 the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step Rmt 55.00 383.45 21,090.00
CPVC solvent cement and testing of joints complete - internal work - exposed on wall - 50mm
nominal outer dia pipes
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved
112 17.31 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Each 8.00 1,529.65 12,237.00
screws and washers complete.
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,
height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
114 17.78.1 Providing and fixing CP brass health faucet of approved quality - 15 mm nominal bore Each 10.00 1,020.28 10,203.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
17 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP
brass screws with concealed fittings arrangement of approved quality and colour600 mm
long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm,
weighing not less than 190 gms
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved
make conforming to IS:8931. 15 mm nominal bore
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method
prescribed in IS : 2800 (part 1) , including collecting samples from different strata ,
117 24.1.1.1 preparing and submitting strata chart /bore log, including hire & running charges RM 105.00 338.90 35,584.00
of all equipments, tools , plants & machineries required for the job, all complete - upto 90
metre depth below ground level - all types of soil - 300 mm dia
Supplying and lowering of UPVC 150mm dia Plain casing pipe confirming to IS:12818-1992
with relevant amendments with class designation CM and with minimum wall thickness of
118 30.29 7.5 mm as per I.S.Code into the bore well with proper vertical alignments etc. Including the RM 30.00 1,144.68 34,340.00
cost of materials , but excluding the cost of labour for positioning the assembly for
lowering purpose using contractor's rig
119 30.30 Extra for providing 3 mm slots in 150mm dia.UPVC casing pipes RM 80.00 62.29 4,983.00
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized
120 24.4.2 PVC medium well casing (CM) pipe of required dia , conforming to IS:12818, including RM 90.00 628.63 56,577.00
required hire and labour charges, fittings & accessories etc. all complete , for all depths - 150
mm nominal size dia
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and
ISI marked including transportation to the site , lowering to the trenches, laying to proper
121 31.160.1G grade and alignment, testing of joints with required testing equipment,including cost of RM 113.00 265.38 29,988.00
solvent cement,excluding UPVC specials such as bends,tees, threaded pieces
,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and
ISI marked including transportation to the site , lowering to the trenches, laying to
proper grade and alignment, testing of joints with required testing
equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees,
threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
18 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and
ISI marked including transportation to the site , lowering to the trenches, laying to proper
123 31.160.1M grade and alignment, testing of joints with required testing equipment,including cost of RM 215.00 1,748.48 3,75,923.00
solvent cement,excluding UPVC specials such as bends,tees, threaded
pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. -
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including
124 19.35.1 collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : RM 13.00 2,262.97 29,419.00
2 fine sand) including testing of joints etc. complete 450 mm dia RCC pipes
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape
and approved quality - LD - 2.5 - rectangular shape 600x450 mm inernal dimensions
Supplying of electrically operated wet type submersible motor and pumpset AC 3 phase,
415 volts, 50 Hz, 2900-3000 RPM.The pump shall have brass impeller, high
grade steel shaft with sufficient stages having outlet size of 2"/2.5"/3" dia. to suit the
borewell (150 / 200mm dia.), complete.The rate includes, all taxes, freight, etc., FOR at site
in UT of Puducherry. The pumpset shall be guaranteed for a period of one year from the
date of commissioning.(5 HP Submersible motor and pumpset).
Supplying and fixing of fully automatic air break star-delta starter range for 5A to 13A
127 31.256.1A F.A.S.D.with suitable M.S. angle frame etc., complete.- 5HP to 12.5 HP No 3.00 6,641.82 19,925.00
Supplying and fixing of 1x3x4 sqmm (single run) PVC insulated copper submersible flat
flexible cable of Finolex make complete.-upto 10HP pumpset
Sub Total For Water Supply & Sanitary Works = 12,32,755.00
FIRE FIGHTING ARRANGEMENTS
Excavating trenches of required width for pipes and fittings etc. including dressing of sides,
ramming of bottom depth upto 1.5 Mtrs including getting out the excavated soil and then
129 returning the soil as required in layers not exceeding 20 cms in depth including consolidating Cum 80.00 621.05 49,684.00
each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as
directed within a lead of 150 mtrs (pipe not exceeding 300 mm). In ordinary soil.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
19 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing, Laying. Testing & Commissioning of RCC hume pipes of NP2 class with suitable
collars filling the recess at joints of pipes with hemp dipped in hot bitumen or other suitable
130 compound for chaulking of joint by jack, setting up of loose space over the collar joints
caulked with CM 1:2, finished both ends to a slope of 1:1 including curing, testing of pipes,
etc., complete.
Drilling with core cutting machine in RCC beams,slabs floors,etc., for laying pipes and
rendering thesame in RCC 1:2:4, finishing the same to the satisfaction of the owner or his
131 authorized representative etc., including nominal reinforcement wherever required,
complete. The quoted rate shall alsoinclude for providing EPOXY based water
proofingcompound for sealing the joints around the pipes.
a 50mm dia upto 110 mm dia. Nos. 4.00 1,314.15 5,257.00
b 100mm dia. upto 150 mm dia. (from pump room - pipe outlets) Nos. 2.00 1,676.84 3,354.00
FIRE HYDRANT SYSTEM
Supplying, installing, testing and commissioning of G.I Pipes, ERW confirming to IS 1239 Pt -
I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and above shall be G.I as per
IS: 3589 (6mm Wall thick) with painting, suitable type of supports, anchor fasteners, bolts
nuts ( Galvanised), clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows,
flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc,
PIPING ABOVE GROUND :
Supply, errect, jointing, testing and commissioning of heavy class G.I pipes (as per IS-1239).
The pipes being fixed on to the wall or suspended from the ceiling / truss with angle iron
supports complete with bends, tees, flanges and with all other required accessories including
painting of the pipeline with two coats of approved enamel paint over a coat of anti corrosive
primer etc. complete. As per IS code standards. Rate quoted above shall include providing
133 M.S.supports in angle iron / plates pipes etc. at every 2.5 m c/c. Rate quoted shall include for
supply and providing necessary, welding cutting, 'U' clamps both nuts, washers etc.as per
specification or pipe supports for horizontal / vertical pipes running along wall / column,
slabs trenches etc to suit different dia pipes made of GI/MS rods, flats etc. consists of strap,
nuts washers, threaded rod etc., rate quoted shall also include necessary aniti corrosive
painting and 2 coat f approved enamel colour paint
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
20 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
b 150 mm dia. (Basement ceiling, external yard hydrant and risers) Rmt 90.00 3,989.64 3,59,068.00
Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN
134 10/16) slim seal standard lever operated type with required flanges, nuts, bolts etc.
complete. - PN-10
Supply, fixing, testing and commissioning of Air release valves screwed ends of approved
brand of manufacture, with accressories,etc complete
Supplying, installing, testing and commissioning of heavy duty Gun Metal gate valves screwed
ends of approved brand of manufacture.PN-10
Supply, fixing, testing and commissioning of Non return valve falnged end of approved brand
of manufacture, with accressories,etc complete. PN:10
INTERNAL FIRE HYDRANT SYSTEM :
1 Nos. 63 mm dia female instantaneous pattern oblique SINGLE outlet hydrant valve with
chain and cap of GM gunmetal.
2 Nos. 63 mm size RRL as per IS 636 Type I (ISI mark) 15 Mtrs long with 63 mm gunmetal
male and female instantaneous coupling.
63 mm Gunmetal branch pipe with hexagonal detachable 16 mm nozzle, made instantaneous
coupling etc. complete.
Hose reel drum with 19 mm dia bore reinforced rubber hose of length 40 Mtrs length fitted
141 with 6.35 mm dia. nozzle. The hose reel drum shall be recessed swinging type with reel drum nos 13.00 10,606.34 1,37,882.00
hose provided with coupling as per detailed specification.
Internal hose cabinet frame (1200 x 900 x150) fronted with hinged & lock made out of 16 G
142 M.S. sheet with powder coated paint of to suit internal fire duct opening to accommodate the Nos 13.00 9,149.35 1,18,942.00
following accessories as mention above :-
SINGLE HEADED YARD HYDRANT :
Supply, fix, test and commissioning of 80 mm dia GI MSDF bend.80 mm dia GI MSDF stand
143 pipe (1 Mtr below + 1 Mtr above).The pipe portion below ground shall be with anti corrosive Nos 4.00 3,428.21 13,713.00
treatment as per detail specifications
Supply, fix, test 1 No. 63 mm dia female instantaneous pattern oblique hydrant valve with
chain and cap of gun metal
Supply, fix, test 63 mm size C.P. Hose as per IS 8423 Type I (ISI mark) 15 Mtrs long with 63
mm gun metal make male and female instantaneous coupling.
Supply, fix, test 63 mm gun metal branch pipe with gun metal hexagonal detachable 16 mm
146 Nos 4.00 2,136.42 Digitally signed
nozzle, made instantaneous coupling etc. complete. DEEPAK DEEPAK KUMAR MEHRA
21 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supply, fix, test M.S. Hose cabinet stand mouted type fabricated out of M.S. sheet of 16 swg.
with glass fronted ( 4mm thick glass with rubber beeding) door and size of the cabinet shall
147 be 600mm x 750 mm x 250 mm Quoted rate shall be includes suitable stand for mounting, all Nos 4.00 8,014.06 32,056.00
fasteners etc, and cabinet shall be powder coated of approved colour both inside and out
a) Two nos. 63 mm dia Gun metal instantaneous inlet arranged on a 100 mm dia GI header
with flanges. b) 1 nos. 100 mm dia Butterfly valves ( PN10) Insitu moulded
a) 4 nos. 63 mm dia Gun metal instantaneous inlet arranged on a 150 mm dia GI header with
149 flanges. b) 1 No. 150 mm non-return valves.- (PN16) c) 1 no of 150 mm dia Butterfly valves LS 1.00 16,604.46 16,604.00
( PN16) Insitu moulded. d) 1 no of 100 mm dia Butterfly valves( PN16) Insitu moulded
SPRINKLER PIPING
Supply,fixing and commissioning of Installation control valve consting of :- a) 1 No. alarm
150 valve and bell b) 2No. Main stop valve. c) Pressure guage, drain valve and piping etc., as per
Supply, erect, jointing, testing and commissioning heavy class G.I pipe (as per IS-1239) in
trenches (1 Mtrs below ground level) with necessary supports at equal interval. Rate quoted
shall include for necessary specials like long radius bends, tees, including cutting,welding /
151 flanged joints with necessary washers, nuts, bolts,etc. Rate quoted shall also include for
providing concrete anchor blocks (thrust block) at all change in direction of pipeline and also
near each joints and also providing wrapping and coating for anticorrosive treatment as per
Providing and fixing nominal bore quartzoid bulb type sprinkler 68 Deg.C standard response
upright type with suitable fittings complete.
Providing and fixing nominal bore quartzoid bulb type sprinkler 68 Deg.C quick response
pendent type with suitable fittings complete. - K 80
Providing and fixing nominal bore quartzoid bulb type sprinkler 68 Deg.C extended coverage
side wall type with sutiable fittings complete. - K 80
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
22 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supply, erection, testing, jointing and commissioning of heavy class GI pipes conforming to IS
1239. Pipe specials such as bends, tees, reducers, etc. shall confirm to ASTM A 234 Gr WPB
forged fittings. The pipe shall be with flanged joints / weld joints. Rate quoted shall include
for necessary pair of flanges gaskets, nuts, bolts, etc., for pipes being suspended from ceilings
beam bottom, clamped on to the walls, etc., and fittings upto 50mm socket welded type, 65
and above should be butt welded type.and complete. Rate quoted below shall include
155 providing, fixing as pipe supports from column/wall or suspenders from roof slab to suit
various dia of pipes made out of GI adjustable rods threaded for a sufficient length to adjust
the height of support along with clamping arrangement for holding pipes of anchor fastening
arrangement design of hanger and should confirm to specification. (pipe support - 25 mm dia
to 50 mm dia @ every 1.5 m c/c and 65 mm to 100 mm dia @ every 2.5 m c/c). Also rate
quoted shal include necessary pipe supports for 150 dia with supply and fixing of channel,
angle iron, flats as per drawing / instruction at site to suit site condition, including for
Supplying, installing, testing and commissioning flow switch on sprinkler distribution header
156 on each floor and shall be connected to fire alarm panel through cable. Cable shall be
measured seperately.
Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 (PN10/
157 PN16) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete(
with lock and key arrangement)
Supply, fixing, testing and commissioning of Air release valves screwed ends of approved
brand of manufacture, with accressories,etc complete- PN10
Supplying, installing, testing and commissioning of heavy duty Ball valve screwed ends of
approved brand of manufacture. PN10
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
23 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Providing and installing in position the following type of sign boards made out of 3mm thick
160 "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted
foam board, complete with mirror fasteners.
Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of
a 1.5cm height letters in red with white back ground.The size of the board shall be 25cm x 30 Nos 10.00 558.95 5,589.00
cm and shall be fixed at the height of 2 mts. from finished floor near Manual call points.
Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure on every
b floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting Nos 10.00 496.84 4,968.00
colour from back ground.Size shall be 15cm x 60cm.
Providing and fixing in position the signages " FIRE ORDER" it should contain the following
matter on 3mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self
adhesive vinyle painted foam board of 3' x 4'. Alert the security at security at security room
by actuating MANUAL CALL POINT located at strategic location. Evacuate the occupant by
using FIRE EXITS AND EMERGENCY EXITS ONLY and assenbly at various addembly points. If
possible try to extinguish the fire by using nearest/suitable portable extinguishers or water
from nearest wer riser. Be calm and do not give an roon from panic, walk, do not run. If you
encouner serious difficulty in evacuaton, flat and try to attract attention of rescue team.
Action by security / Reception upon receipt of information through fire alarm or fire detector
or by using public address system. Alart the occupants by using public address system.
162 Inform fire control through any one of the following phone number: 101/Local nos. Refer Nos 2.00 3,105.26 6,211.00
evacuation plan from evacuating standard people. Guide the fire force, on their arrival to the
seat of fire. in case of the casualties, call ambulance by dialling number.
FIRE EXTINGUISHERS
Supply and install in position approved make ABC Stored pressure type Fire Extinguisher of
6 kgs capacity, fitted with discharge control valve (sq.grip type) CE marked and pressure
163 gauge, filled with mono ammonium phosphate powder as per EN 3 615 approval, with Nos. 12.00 3,113.96 37,367.00
discharge hose and open nozzle and supplied complete with initial charge as per IS: 15683
with ISI mark and wall bracket. Fire Rating 3A, 21B
Supply and install in position approved make ABC Stored pressure type Fire Extinguisher of
2 kgs capacity, fitted with discharge control valve (sq.grip type) CE marked and pressure
164 gauge, filled with mono ammonium phosphate powder as per EN 3 615 approval, with Nos. 3.00 6,642.78 19,928.00
discharge hose and open nozzle and supplied complete with initial charge as per IS: 15683
with ISI mark and wall bracket. Fire Rating 3A, 21B
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
24 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supply and install in position approved make CO2 Stored pressure type Fire Extinguisher
of4.5 kgs capacity, fitted with discharge control valve (sq.grip type) CE marked and pressure
165 gauge, filled with mono ammonium phosphate powder as per EN 3 615 approval, with Nos. 4.00 6,642.78 26,571.00
discharge hose and open nozzle and supplied complete with initial charge as per IS: 15683
with ISI mark and wall bracket. Fire Rating 3A, 21B
Supply and install in position approved make CO2 Stored pressure type Fire Extinguisher of
2.0 kgs capacity, fitted with discharge control valve (sq.grip type) CE marked and pressure
166 gauge, filled with mono ammonium phosphate powder as per EN 3 615 approval, with Nos. 9.00 9,135.68 82,221.00
discharge hose and open nozzle and supplied complete with initial charge as per IS: 15683
with ISI mark and wall bracket. Fire Rating 3A, 21B
Supply and install in position approved make water mist Fire Extinguisher o 6.0 Ltr capacity,
fitted with discharge control valve (sq.grip type) CE marked and pressure gauge, fwith
discharge hose and open nozzle and supplied complete with initial charge as per IS: 15683
with ISI mark and wall bracket. Fire Rating 3A
Supply and installation of approved make ABC- 5.0 Kg fire extinguisher& Fire Bucket of 24
guage, galvanised steel sheet of standard 9 Ltrs capacity and ABC extinguisher 5 kg(Stored
pressure type). Bucket shall be round bottom shape,fire bucket stand & suitable M.S supports
168 & painted round bottom shape,fire bucket stand & suitable M.S supports & painted white Nos. 18.00 88.50 1,593.00
inside and red outside and black on the bottom dome with letters 'FIRE' in black and gold
with wall mounting bracket and screws.(1sets-4nos buckets & stand) Rate quoted shall
include floor mounted stand as approved by archt.
FIRE ALARM CONTROL VALVE :
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
25 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
a)Supply, erection, testing and commissioning of Micro Processor-controlled Intelligent
adressible Main Fire Alarm Control Panel to monitor loop panels located in at Ground floor
with dual stage alarm facilities, hooter, fire / fault indicators, audio-visual signals, battery,
battery charger, central processing unit, video display unit, provision for printer, password
protected, loop powered hooters, etc. intigration complete in all respects as per detailed
specification.(preferable:125 Detectors + 125 devices per loop). Panel must be capable of
True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600
characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for
programming. The panel shall work in degrade mode in case of CPU failure. Four access
levels. The panel must be capable of cross zoning facility. The Panel shall have 24 Hours
backup and 4 Hrs emergency backup. Panel should be UL 10th Edition and FM approved to
meet industry highest standards. rate quoted shall also include panel with provision to
expand for 2 addittional Loops in future and installation of software for programming
(mapping) the Fire detection and voice alarm system through FACP / Lap top. The software
a 4-Loop upto 8 loops Panel FIRE ALARM CONTROL PANEL : GROUND LVL Nos 1.00 2,95,000.00 2,95,000.00
b Cost for addition / deletion of extra Loop cards in to the panel mentioned above. Nos 1.00 48,380.00 48,380.00
Supply, Installation, Testing & Commissioning of Addressable Rate of Rise Heat Detector
rated at 9.4 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing.
Addressing shall be with user friendly rotary decimal switches.
Supply, installation, testing and commissioning of Addressable Multi-criteria Photo-Thermal
Detector with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection
device shall include the ability to combine the signal of the thermal sensor with the signal of
the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also
171 include the inherent ability to distinguish between a fire condition and a false alarm Nos 114.00 2,938.20 3,34,955.00
condition by examining the characteristics of the thermal and smoke sensing chambers and
comparing them to a database of actual fire and deceptive phenomena. The detector shall
have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary
decimal switches. ( COMMON AREA AND ABOVE FALSE CEILING AREAS)
Supply, installation, testing and commissioning of Response indicator with led indicator
172 mounting base etc., as per specification Nos 120.00 413.00 49,560.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
26 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
a) Supplying, installing, testing and commissioning approved make Electronic Dual tone type
Hooters with power supply 24v DC (Horn cum Strobe rated at 82 Dba @ 3m for Audible
annunciation and 75cd flashintg at 1 Hz for visual indication), 6WSpeaker with talk back
facility and addressable Manual call points Break glass type-UL Listed
174 Supplying, installing, testing and commissioning Sounder Control Module. Nos 10.00 3,222.58 32,226.00
175 Supplying, installing, testing and commissioning Addressable Manual call points. Nos 10.00 3,103.40 31,034.00
c) Supplying, installing, testing and commissioning of PA Speaker with necessary
accessories. 6 Watts (Two way talk back).
Supply,installation, testing and commissioning of intelligent Addressable Fault isolator
177 module capable of monitoring shorted loop circuit and automatically restore Nos 16.00 3,422.00 54,752.00
communications when shorted conditions are corrected.UL Listed
Supply, testing and commissioning of 1100V Grade 2 core of 1.5 sqmm PVC insulated
FRLS(armoured) Twisted Pair cable for connecting detectors / devices to panels and main
micro processor control panels located in the respective floors including end termination
with indentification tags at each end, etc., complete.The quoted rates shall be inclusive of
necessary juntion boxes made of M.S 16 SWG with cutouts for incoming & outgoing cables in
respective floors. (RED COLOUR)
Supply, Installation, Testing & Commisioning Addressable Relay Module for AHU, Access
Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs. The
relay module shall provide DPDTcontact rated at 24v DC, 2A. The device shall have an LED
which shall blink in normal state & get steady on activation to monitor the heath status of the
device. Addressing shall be with user friendly rotary decimal switches. Module shall be
supplied with mounting plate from OEM for ease of installation & maintenance.UL Listed
Supply, Installation, Tsting & Commisioning Addressable Monitor Module for Sprinklers,
Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free
contacts. The device shall have an LED which shall blink in normal state & get steady on
activation to monitor the heath status of the device. Addressing shall be with user friendly
rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of
installation & maintenance. UL Listed
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
27 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supply and fixing of Perforated Cable Trays Upto 300mm size shall be of 2mm thick with
50mm flange, pre – galvanized.. Above 300mm size shall be of 2mm thick with 75mm flange,
pre – galvanized,bolted type.) Rate shall exclude necessary angle iron support and M10 full
181 threaded down rods, M10 anchor fasteners,40x40x6mm MS channels etc., complete as per
technical specification. Maximum height of suspension shall not exceed 500mm. The support
shall be provided at every 1 Mtr.The Cable tray supports upto 450 mm wide Rod support
,More than 450mm wide Ms channel Support.
a Size : 300X50mm wide - 2mm thick Rmt 40.00 1,150.50 46,020.00
Supply,installation, testing and commissioning of intelligent Addressable beam detector with
with suitable reflector as per standard specification and necessary accessories etc., complete
Supplying, installing, testing and commissioning of zone selector Talk back console and with
CRCA sheet housing,with necessary input ,output devices and control desk( rack) as required.
Console shall have all call / call back facility complete and it should also work on AC single
a 5 ZONE @ Ground level Nos 1.00 47,200.00 47,200.00
Supplying, installing, testing and commissioning solid state Amplifier out put in rack,
including neccessory control wires, jacks etc. complete.
a 100 W amplifier (@ Reception desk) Nos 1.00 29,500.00 29,500.00
185 Supplying, installing, testing and commissioning 40 strand twin core control cables of PVC Rmt 120.00 100.30 12,036.00
insulated copper conductor, Confirming to IS 1554, as per specification.
186 Supplying, installing, testing and commissioning approved make 25mm P.V.C. conduits on Rmt 40.00 76.70 3,068.00
ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.
PANEL WITH VOICE EVACUATION - GROUND LVL
Supplying, installing, testing and commissioning of 8 zone IP based, digital Voice Alarm
controller expandable upto 128 zones. The voice alarm controller should be able to connect
directly over Ethernet. It should have functions like the audio playing, zone control, fault
monitoring, log recording, volume control and amplifier switchover. The Voice alarm
187 controller should also have the following functions: Nos 1.00 2,89,100.00 2,89,100.00
. 255 Priorities
. Time schedule broadcasts
. Capable of amplifier redundancy
. 8 trigger inputs/outputs
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
28 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supplying, installing, testing and commissioning of IP based Networkable touch screen
paging station for selection of zones, supervision of system status, setting of scheduled
broadcasts with the following functions:
188 . Built-in monitoring loudspeaker Nos 1.00 59,000.00 59,000.00
. Detachable goose-neck microphone
. LCD touchscreen display
Supplying, installing, testing and commissioning of 1X500W Class-D Amplifier with 1
189 independent channel and can provide automatic re-settable overcurrent, overload,
overheating, overvoltage, under-voltage and DC protection
Supply, installation, testing & commissioning of Suitable size, 19-inch Rack with standardized
frame or enclosure for mounting multiple PA controllers, CD player, FM sources, Amplifiers
190 etc modules, shall have Lockable doors, with proper ventilated and open able doors from all Nos 1.00 61,950.00 61,950.00
sides, with casters and with cooling fans as above complete with necessary mounting
hardware & accesories.
Supplying, installing, testing and commissioning of back ground music player MP3 player,SD
191 card reader,USB input,AM/FM Tuner including accossories integrated with PA system Nos 1.00 18,290.00 18,290.00
Supplying, installing, testing and commissioning 6W Ceiling Speaker with max SPL1M/1W
192 96dB . Frequency response of 80Hz-20KHz with a dispersion angle of 160 deg. The speaker Nos 37.00 944.00 34,928.00
should have tappings at 6W/3W/1.5W
Supply, installation, testing & commissioning of 2-Core 1.5 sq.mm , 48/0.2mm (15 AWG).
193 multi-stranded unshielded Insulated Straight FRLS armoured Cable for Speakers, green in Rmt 400.00 112.10 44,840.00
Colour with necessary accessories.
Supply, installation, testing & commissioning of Shielded CAT 5 or CAT 6 Cable for Call
Stations with necessary accessories.
Supplying, installing, testing and commissioning approved make PVC (FRLS) conduits on
ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.
FIRE PUMP ROOM EQUIPMENT
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
29 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supply, Erection, testing & commissioning of electrical motor driven Hydrant Pump of
horizontal centrifugal end suction backpull out type with gland packing and capable to
deliver 2280LPM (137 m³/ Hr) at 70 MWC with all necessary accessories like bronze
impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting,
coupling, coupling guard and base plate for pump, fabricated mild steel channel,foundation
196 bolts, and pump should have the dry run sensor provision, etc., as per local fire brigade No. 1.00 6,37,790.00 6,37,790.00
requirement . The pump shall capable to have 3.5 kg/cm² residual pressure at top most
hydrant point. The pump shall be coupled to electrical motor of 65 HP with speed of 2900
RPM, Electric supply 415V, 50 Hz and complete set shall be mounted on a common base
frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and
Foundation bolts etc. RCC foundation is under civil scope.
Supply, Erection, testing & commissioning of Diesel Engine driven common stand by pump,
horizontal centrifugal end suction backpull out type with gland packing and capable to
deliver 2280LPM (137 m³/ Hr) at 70MWC with all necessary accessories like bronze
impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting,
coupling, gear box, base plate for pump, fabricated mild steel channel with foundation bolts
etc., It includes providing and fixing fuel oil tank (capacity as per TAC requirements) with
supports and necessary pipe works for diesel engine, battery and battery charger to be
connected to control panel of diesel engine and exhaust silencer including necessary pipe
work and lagging, pump should have the dry run sensor provision, etc., and shall be
automatic in operation diesel engine control panel with 24V DC storage battery & its battery
charger with required Ampere - hour rating, terminal box (2 nos. of 12volts), cooling water
line for engine with required pipes / valves / fittings etc., as per TAC including all associated
electrical works. The pump shall capable to have 3.5 kg/cm² residual pressure at top most
hydrant point. The pump shall coupled to Diesel engine, radiator water cooled type with
Supply, erection, testing & commissioning of electrical motor driven Jockey pump of
horizontal centrifugal end suction back pull out type with gland packing and capable to
deliver 180LPM (10.8 m³/ Hr) at 70 MWC with all necessary accessories like bronze
impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting pad
198 and flexible connections at discharge end of the pipes, pump should have the dry run sensor No. 1.00 3,47,789.47 3,47,789.00
provision etc. and shall be automatic in operation.The pump shall be coupled to motor of 15
HP with speed of 2900RPM and complete set shall be mounted on common base frame. The
quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation
bolts etc. RCC foundation is under civil scope.foundation is under civil scope
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
30 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supply, Erection, testing & commissioning of electrical motor driven Hydrant Pump of
horizontal centrifugal end suction backpull out type with gland packing and capable to
deliver 2280LPM (137 m³/ Hr) at 70 MWC with all necessary accessories like bronze
impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting,
coupling, coupling guard and base plate for pump, fabricated mild steel channel,foundation
199 bolts, and pump should have the dry run sensor provision, etc., as per local fire brigade No. 1.00 5,900.00 5,900.00
requirement . The pump shall capable to have 3.5 kg/cm² residual pressure at top most
hydrant point. The pump shall be coupled to electrical motor of 65 HP with speed of 2900
RPM, Electric supply 415V, 50 Hz and complete set shall be mounted on a common base
frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and
Foundation bolts etc. RCC foundation is under civil scope.
Supply, Erection, testing & commissioning of electrical motor driven Water curtain Pump of
horizontal centrifugal end suction backpull out type with gland packing and capable to
deliver 2280LPM (137 m³/ Hr) at 40 MWC with all necessary accessories like bronze
impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting,
coupling, coupling guard and base plate for pump, fabricated mild steel channel,foundation
200 bolts, and pump should have the dry run sensor provision, etc., as per local fire brigade No. 1.00 5,900.00 5,900.00
requirement . The pump shall capable to have 3.5 kg/cm² residual pressure at top most
hydrant point. The pump shall be coupled to electrical motor of 65 HP with speed of 2900
RPM, Electric supply 415V, 50 Hz and complete set shall be mounted on a common base
frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and
Foundation bolts etc. RCC foundation is under civil scope.
Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel, of
cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,
compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of
approved shade after 7 tank treatment process, cable alley, inter-connection, having
switchgears and accessories mounting and internal wiring, earth terminals, numbering etc.
complete in all respects, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with
201 enclosure protection class IP 42 as required. 400 Amps. 4 Pole MCCB, 36 KA Thermal Set 1.00 1,80,105.26 1,80,105.00
Magnetic type with operating handle mechanism and changeover interlocking etc. and
necessary accessories
(b) Voltmeter (0-500 Volts) with selector switch.
(c) Ammeter (0- 500Amps.) with selector switch & CT's etc.
(d) Set of 3 Phase indicating lamp. (e)
Set of AJ.bus bar Amps.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
31 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
(a)Electrical pump Hydrant & Sprinkler
125 Amps. 4 Pole MCCB, 25 KA Thermal Magnetic type with operating handle mechanism
and necessary accessories with 65 HP fully automatic star/ delta starter with over load
protection, current sensing type single phase preventor complete with all accessories and
internal wiring required for automatic operation, selector switch for local/remote,
auto/manual/OFFoperation. (b) Jockey pump for Hydrant & Sprinkler
32 Amps. 4 Pole MCCB, 25 KA Thermal Magnetic type with operating handle mechanism and
necessary accessories with 15 HP fully automatic DOL starter with over load protection,
current sensing type single phase preventor complete with all accessories and internal Set 1.00 59,993.68 59,994.00
wiring required for automatic operation, selector switch for local/remote,
auto/manual/OFFoperation. (c) Electrical pump Water curtain fire compartment
32 Amps. 4 Pole MCCB, 25 KA Thermal Magnetic type with operating handle mechanism and
202 necessary accessories with 15 HP fully automatic DOL starter with over load protection,
current sensing type single phase preventor complete with all accessories and internal
wiring required for automatic operation, selector switch for local/remote,
auto/manual/OFFoperation. (d) Diesel Engine Control.
Control for Diesel Engine comprising:-
(i) Auto/Manual selector switch & 3 attempt starting device, timers and relays as required,
push buttons, start/stop in manual mode.
(ii) Indication lamp for High/Low Lub.oil pressure, High Water Temp.and Engine ON
(iii) Battery charger suitable for 12 V/ 24 V DC with boost and tickle selector switch, 0-30 V
DC'<volt meter, 0-20A DC Ammeter.
(iv) AII standard relays and accessories for automatic operation of diesel engine.
Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel
armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The
cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For
cables laid out door the rate shall include earth excavation providing brick and sand
protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes.The
minimum size of the cables shall as mentioned below,
a 2R x 3.5 core x 50 sqmm Aluminium conductor cable for Electrical motor Driven pump. Mtr 30.00 786.25 23,588.00
b 4 core x 16 sqmm Aluminium conductor cable for Jockey Pump. Mtr 15.00 342.82 5,142.00
c 12 core x1.5 sqmm Copper cable for Diesel Engine pump Mtr 15.00 614.84 9,223.00
d 2 core x 1.5 sqmm Copper cable for pressure switch Mtr 25.00 300.59 7,515.00
e 4 core x 2.5 sq mm Copper cable for MCC to ESP interlocking. Mtr 15.00 799.92 11,999.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
32 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension
204 supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed Rmt 30.00 1,329.05 39,872.00
500 mm.Size of the tray shall be suitable for laying the above mentioned cables.
Supply, fixing, testing and commissioning of electronic type level indicaor of approved make
with pressure transducer, alarm,sensors, LED display for indicating high, half full and low
level in sump (ground level reservoir) Rate quoted shall include for supply and laying
necessary armoured control cablling inside pumphouse (approx. length 30 meters) for
connecting sensors to panels located inside pumphouse, wiring from the control panel to
sensor probes, ON / OFF indicators etc. complete in all respects.
Supply, install, testing & commissioning of CI sluice valves of approved make as per IS 780
206 Class I with necessary flanged tail piece, compansion flanges, bolts, nuts, gaskets,
etc.,complete in all respects. PN 10 rating valve
Supply, Installation , Testing & Commissioning of MS Fabricated Pot/Basket Strainer with
accessories etc., complete.
Supply, Installation , Testing & Commissioning of NON RETURN VALVE with accessories etc.,
a) Supplying, Installing, testing and commissioning CI Sluice valves as per BS 5155 ( PN 16)
slim seal standard lever operated type with required flanges, nuts, bolts etc. complete.
Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 10)
210 slim seal standard Gear operated type with required flanges, nuts, bolts etc. complete. (For
Delivery Header)
Supplying, Installing, testing and commissioning of Flow meter with necessary accessories as
per standard specifications etc complete.
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves
with fittings of screwed end type.
a 25 mm nominal dia (for pressure switch manifold & air vessel tank) Nos 4.00 999.89 4,000.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
33 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supply and installation of differential Pressure switches of suitable range (0 to 12 bar) for
pumpsets complete with necessay Ball valves, Fittings like unions / colors / reducers etc.
Supply and installation of Pressure gauges of suitable range (0-16 bar), 110 mm diameter
214 dial for pumpsets completes with necessary Ball valves, siphon, Fittings like unions / colors / Set 4.00 3,785.94 15,144.00
Supply, fixing, testing and commissioning of air vessel tank shall be fabricated out of of 250
mm dia MS pipe to 1000 mm long complete with 25mm inlet, 25mm drain, 25mm dia
215 connection for air release valve including legs, painting with red oxide primer and finished No. 1.00 36,424.74 36,425.00
with fire red enamel paint. It shall be inclusive of all relevant pipes, valves, specials upto
pump header and other accessories etc.
Exhuast pipe for Diesel engine of 100 mm dia M.S. Medium grade with mineral wool
insulation with aluminum sheet. The quoted rate shall include 100 mm diameter MS pipe
medium grade conforming to IS 1239 Part-1 and mineral wool insulation with aluminum
sheeting and Pipe supports also.
Sub Total For Fire Fighting System = 96,01,663.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
34 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Make : Cri or Equivalent ; Flowrate : 1500 Lph Inlet / Outlet : 25mm ; Type : Monoblock 1hp
PRESSURE SAND FILTER:
Make : PENTAIR or Equivalent ; Flow rate : 1500 Lph ; Material of Construction : FRP
Inlet / Outlet Connection : 25 mm ; Multi port Valve Size : 25 mm
Media : Pebbles & Sylex and Sand.
ACTIVATED CARBON FILTER:
Make : PENTAIR or Equivalent ; Flow rate : 1500 Lph ; Material of Construction : FRP
Inlet / Outlet Connection : 25 mm; Multi port Valve Size : 25 mm ; Media : Cocount Shell
Activated Carbon & Pebbles.
Flow rate : 1500 Lph ; Material of ; Construction : Polypropylene ; Inlet / Outlet Connection :
¾” mm ; Number of Cartridges : 2 Nos. of 20” Long ; Number of Housing : 2 Nos. ; Working
217 Pressure : 2 to 3 Kg / Sq. cm ; Filter Elements : 5 Wound PP. Nos 4.00 1,28,620.00 5,14,480.00
RO PLANT FRAME:
Skid : Stainless Steel (SS 202 Grade) ; Thickness of square pipe : 1 inch ; Thickness of sheet :
1.2 mm ; Method of cutting : Laser. Membrane: ; Material of Construction : Thin Film
Composite ; Make : ( FILMTEC/Brackish/Hydranatics ) ; No. of Membranes : 2 Nos.
Dimension : 40” x 40”
Type of membrane : Sprial Wound.
HIGH PRESSURE PUMP:
Material of Construction : SS 304
Make :CRI (2-16) ; Type : Vertical Multi Stage ; Motor Power : 2 HP ; Flow Rate : 1500 LPH.
ACcord 1:3 Panel with Automatic Float – 1no; Flowmeter – 2no”s; SS Pressure Gauges - 2no”s
; Solenoid Valve – 1no.
Sub Total for RO Plant = 5,14,480.00
AIR VENTILATION ARRANGEMENTS
Variable pitch axial fan high temperature:TA HT-900-297-6-6-33 (250 @ 2
218 Hrs),Volume(Specified/Proposed):15,000(15,383) cfm,Pressure Nos 1.00 89,769.33 89,769.00
(Specified/Proposed):15.0(15.8) mmwg,Speed (rpm):1440rpm,Motor Power (kW):4KW
Variable pitch axial fan high temperature:TA-HT-900-297-6-6-40(250 @ 2
219 Hrs),Volume(Specified/Proposed):15,000(15,020) cfm,Pressure Nos 1.00 84,565.50 84,566.00
(Specified/Proposed):15.0(15.8) mmwg,Speed (rpm):1440rpm,Motor Power (kW):4KW
Axial Jet Fan:CC JD 302/4 HT,Volume(Specified/Proposed):1356(2712) cfm,Pressure
(Specified/Proposed):0pa ,Speed (rpm):1440/2800rpm,Motor Power (kW):0.25/1.1KW
Sub Total for Air Ventilation = Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
35 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Electrical Works
Electrical Works (Building)
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing
221 5.2 masonry enclosure with cover plate having locking arrangement and watering pipe etc. with Each 3.00 3,815.97 11,448.00
charcoal / coke and salt as required
Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories, and
222 5.4 providing masonry enclosure with cover plate having locking arrangement and watering Each 1.00 4,355.34 4,355.00
pipe of 2.7 meter long etc.but without charcoal / coke and salt as required
Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth
electode , including connection / termination with GI thimble etc. as require
Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as strip earth
electrode , including connection / terminating with nut , bolt, spring , washer etc.as required.
(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer
spached at 50mm)
Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip earth
electrode , including connection / terminating with G.I. nut , bolt, spring , washer etc.as
required. (Jointing shall be done by overlapping and with 2 sets of G.I.nut bolt & spring
washer spached at 50mm)
Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc
Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections etc . as
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as
Supplying and fixing following way , single pole and neutral , sheet steel , MCB disribution
board , 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar ,
earth bar , din bar , interconnections , powder painted including earthing etc. as required
(But without MCB / RCCB / Isolator) -12 way (4+36) , double door
Wiring or light point / fan point / exhaust fan point / call bell per point with 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable in surface / recessed medium class pvc
conduit , with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable etc.as required - GROUP C
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
36 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed medium class PVC conduit , 2 way modular switch ,
modular plate , suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc.as required
Wiring for group controlled (looped) light point / fan point / exhaust fan point / call bell
point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed PVC conduit , and earthing the point 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable etc.as required - Group C
Supply and fixing of meter board suitable for 32A three phase service connection with 3 Nos.
32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of
233 size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with Nos 18.00 2,325.78 41,864.00
painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection
and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit
Supplying and fixing following modular switch / socket on the existing modular plate &
switch box including connections but excluding modular plate etc. as required - 5/6 A switch
Supplying and fixing following modular switch / socket on the existing modular plate &
235 1.24.3 switch box including connections but excluding modular plate etc. as required - 15/16 A Each 48.00 85.11 4,085.00
Supplying and fixing following modular switch / socket on the existing modular plate &
236 1.24.4 switch box including connections but excluding modular plate etc. as required - 3 pin 5/6 A Each 39.00 69.65 2,716.00
Supplying and fixing following modular switch / socket on the existing modular plate &
237 1.24.5 switch box including connections but excluding modular plate etc. as required - 6 pin 15/16 Each 48.00 121.01 5,808.00
A socket outlet
Supplying and fixing following modular switch / socket on the existing modular plate &
238 1.24.6 switch box including connections but excluding modular plate etc. as required - Telephone Each 19.00 73.92 1,404.00
Supplying and fixing following modular switch / socket on the existing modular plate &
239 1.24.7 switch box including connections but excluding modular plate etc. as required - TV antenna Each 10.00 74.14 741.00
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate
for modular switches in recess etc. as required - 1 or 2 module (75mm x 75mm)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
37 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate
for modular switches in recess etc. as required - 3 module (100mm x 75mm)
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate
for modular switches in recess etc. as required - 4 module (125 mm x 75 mm)
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate
for modular switches in recess etc. as required - 6 module (200 mm x 75 mm)
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate
for modular switches in recess etc. as required - 8 module (125 mm x 125 mm)
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate
for modular switches in recess etc. as required - 12 module (125 mm x 125 mm)
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
246 1.21.1 surface/recess including cutting the wall and making good the same in case of recessed Meter 850.00 50.22 42,687.00
conduit as required. 20mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
247 1.21.2 surface/recess including cutting the wall and making good the same in case of recessed Meter 2,725.00 60.44 1,64,706.00
conduit as required. 25mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
248 1.21.3 surface/recess including cutting the wall and making good the same in case of recessed Meter 1,700.00 77.69 1,32,065.00
conduit as required. 32mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
249 1.21.4 surface/recess including cutting the wall and making good the same in case of recessed Meter 850.00 99.64 84,692.00
conduit as required. 40mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
250 1.21.5 surface/recess including cutting the wall and making good the same in case of recessed Meter 850.00 129.78 1,10,313.00
conduit as required. 50mm
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
251 1.14.1 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit Meter 570.00 91.00 51,869.00
as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
252 1.14.2 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit Meter 1,108.00 108.13 1,19,805.00
as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
253 1.14.3 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit Meter 285.00 129.35 36,865.00
as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
254 1.14.4 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit Meter 100.00 174.11 17,411.00
Digitally signed by
as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire DEEPAK DEEPAK KUMAR MEHRA
38 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS
255 1.14.8 PVC insulated copper conductor, single core cable in surface / recessed medium class PVC Meter 275.00 211.13 58,061.00
conduit as required - 4 X 4 sq.mm + 2 x 4 sq.mm earth wire
256 1098 Supply of 300mm 1400 rpm heavy duty exhaust fan Make:Almonard/Orient/Usha Each 8.00 1,755.00 14,040.00
Installation of exhaust fan in the existing opening , including making good the damage ,
connection , testing , commissioning etc. as required - Upto 450 mm sweep
Supplying, Installation, testing and commissioning of 36/40Watt LED Ceiling light
including cost of material, labour etc., complete.
Supplying, Installation, testing and commissioning of 20/22Watt 4 Feet LED Tube Light
including cost of material, labour etc., complete.
Supplying, Installation, testing and commissioning of Geyser/Water Heater including cost
260 1111 of material, labour etc., complete.25 ltrs. Storage water heater- ABS Make: Each 9.00 7,000.00 63,000.00
Almonard/Venus/V-Guard
Supplying and installing following size of perforated Hot dipped Galvanised iron cable tray
(galvanization thickness not less than 50 microns) with perforation not more than 17.5% , in
convenient sections , joined with connectors , suspended from the ceiling with G.I.suspenders
including G.I.bolts & nuts , etc .as required - 450 mm width
Supplying and installing following size of perforated Hot dipped galvanised iron cable tray
"bends" (galvanisation not less than 50 microns) with perforation not more than 17.5% , in
262 4.7.6 convenient sections , joined with connectors , suspended from the ceiling with G.I.suspenders Each 5.00 1,646.42 8,232.00
including G.I. bolts & nuts , etc.as required - 450 mm width x 50 mm depth x 2.0 mm
Supplying and installing following size of perforated Hot dipped galvanised iron cable tray
"Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5% , in
convenient sections , joined with connectors , suspended from the ceiling with G.I.suspenders
including G.I.bolts & nuts . As required - 450 mm width x 50 mm depth x 2.0 mm thickness
Supplying and installing following size of perforated Hot dipped galvanished iron cable tray
"Cross member" (galvanisation not less than 50 microns) with perforation not more than
264 4.9.6 17.5% , in convenient sections , joined with connectors , suspended from the ceiling with Each 5.00 1,940.42 9,702.00
G.I.suspenders including G.I.bolts & nuts , etc .as required - 450 mm width x 50 mm depth x
2.0 mm thickness
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
39 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supplying and installing following size of perforated Hot dipped galvanised iron cable tray
"Reducer" (galvanisation not less than 50 microns) with perforation not more than 17.5% ,in
265 4.10.6 convenient sections , joined with connectiors , suspended from the ceiling with Each 5.00 2,840.62 14,203.00
G.I.suspenders including G.I.bolts & nuts , etc.as required - 450 mm width x 50 mm depth x
2.0 mm thickness
Sub Total For Electrical Works (Building) = 17,80,619.00
Outdoor Electrcials Work
Supply,Testing and Comissioning of 630A,11KV,25 KA,motorised and SCADA ready load
break switch attatchment to the existing ring main switch gear unit at existing 11 KV PED
RMS Yard, Type SF 6 insulated and motorised construction all complete as required by PED
266 the item including all transformer protections and necessary safety acessories,the plinth shall Set 1.00 3,95,000.00 3,95,000.00
be constructed by civil contractor based on the load calculations given by the electrical
contractor etc...All complete asper spaecifications,drawing and as required by PED. It Shall be
fitted with FPI and VPI
Supplying & Transportation of 11 KV 3CX185 Sqmm XLPE HT Cable from 11 KV outdoor
panel to 11 KV LBS panel and then to 630 KVA transformer.
Supplying & Transportation of 11 KV 3CX185 Sqmm XLPE HT Cable jointing kit with
acessories i)Indoor - 5 Nos.
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor
mounted fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with
hinges door, dust & vermin proof powder coated of approved shades. The doors and
partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter.
Aluminium busbars of adaquate sizes 2 Nos earth terminals etc., complete. MAIN MV PANEL
269 EB Incomer : 1 No 1000A 4Pole ACB EDO type DG Incomer : 1 No 1000A 4Pole ACB EDO type set 1.00 11,02,120.00 11,02,120.00
Busbar : 1000A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars shall have
half the capacity of phase busbars Iterlocks : Electrical Interlocks between 2 Incomers
Outgoing : 1 No 100 A TPN MCCB with releases 5 Nos 200 A TPN MCCB with releases 3 Nos
400 A TPN MCCB with releases 1 No 630 A TPN MCCB with releases 1 No 800 A TPN MCCB
with releases Cable entry: Back/Bottom Entry
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
40 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor
mounted fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with
hinges door, dust & vermin proof powder coated of approved shades. The doors and
partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter.
Aluminium busbars of adaquate sizes 2 Nos earth terminals etc., complete. CAPACITOR
PANEL - 200KVAR APFCR Incomer: 1 No 800A TPN MCCB Capacitor: 50 KVAR Capacitor-1
Nos, 25 KVAR Capacitor-3 Nos, 20KVAR Capacitor-3 Nos, 15KVAR Capacitor-1 No APPC
270 Busbar: 800A TPN Aluminium Busbars 35KA per 1 Sec. APFC Outgoing : 1 No 160A TPN set 1.00 4,27,160.00 4,27,160.00
25KA MCCB and AC 110A contractor with ON/OFF push /indication lamp and 50 KVAR
MDXL Capacitor 3 Nos 100A TPN 25KA MCCB and AC 70A contractor with ON/OFF push
/indication lamp and 25 KVAR MDXL Capacitor 3 Nos 100A TPN 25KA MCCB and AC 55A
contractor with ON/OFF push /indication lamp and 20 KVAR MDXL Capacitor 1 Set 63A TPN
25KA MCCB and AC 40A contractor with ON/OFF push /indication lamp and 15 KVAR MDXL
Capacitor Note: 1 No 25 KVAR Capacitorshould be connected directly to the Main (Busbars)
to avoid reduction in P.F
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor
mounted fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with
hinges door, dust & vermin proof powder coated of approved shades. The doors and
partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter.
Aluminium busbars of adaquate sizes 2 Nos earth terminals etc., complete. LIGHTING
PANEL EB Incomer : 1 No 63A TPN MCCB Busbar: 63A TPN Aluminium Busbars 35KA per 1
Sec. All the neutral busbars shall have half the capacity of phase busbars Outgoing :6 Nos 32
A TPN MCCB with releases
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor
mounted fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with
hinges door, dust & vermin proof powder coated of approved shades. The doors and
partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter.
Aluminium busbars of adaquate sizes 2 Nos earth terminals etc., complete. . POWER PANEL
EB Incomer : 1 No 200A TPN MCCB Busbar: 200A TPN Aluminium Busbars 35KA per 1 Sec.
All the neutral busbars shall have half the capacity of phase busbars Outgoing : 6 Nos 40 A
TPN MCCB with releases 3 Nos 63 A TPN MCCB with releases
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
41 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor
mounted fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with
hinges door, dust & vermin proof powder coated of approved shades. The doors and
partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter.
Aluminium busbars of adaquate sizes 2 Nos earth terminals etc., complete. HVAC PANEL
Incomer: 1 No 630A TPN MCCB Busbar: 630A TPN Aluminium Busbars 35KA per 1 Sec. All
the neutral busbars shall have half the capacity of phase busbars Outgoing : 5 Nos 63A TPN
MCCB 3 Nos 250A TPN MCCB
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor
mounted fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with
hinges door, dust & vermin proof powder coated of approved shades. The doors and
partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter.
274 Aluminium busbars of adaquate sizes 2 Nos earth terminals etc., complete.FIRST FLOOR set 1.00 2,26,560.00 2,26,560.00
PANEL (METER PANEL) Incomer: 1 No 200A TPN MCCB-36KA Burbar: 200A TPN
Alumnium Busbars Compartment type outgoing10Nos-3 Phase. Each outgoing shall have 1
metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (3 Phase). 1
switch compartment shall have 3 Nos 32A porcelain fuse carriers, 1 No 63A TPN MCCB
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor
mounted fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with
hinges door, dust & vermin proof powder coated of approved shades. The doors and
275 partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter. set 1.00 2,26,560.00 2,26,560.00
Aluminium busbars of adaquate sizes 2 Nos earth terminals etc., complete. SECOND FLOOR
PANEL (METER PANEL) Incomer: 1 No 200A TPN MCCB-36KA Burbar: 200A TPN Alumnium
a) Compartment type outgoing10 Nos-3 Phase. Each outgoing shall have 1 metering portion
276 with a provision of 6mm thick hylem sheet to fix the E.B meter (3 Phase). 1 switch -
compartment shall have 3 Nos 32A porcelain fuse carriers, 1 No 63A TPN MCCB
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor
mounted fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with
hinges door, dust & vermin proof powder coated of approved shades. The doors and
277 partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter. set 1.00 1,94,958.00 1,94,958.00
Aluminium busbars of adaquate sizes 2 Nos earth terminals etc., complete. THIRD FLOOR
PANEL (METER PANEL) Incomer: 1 No 200A TPN MCCB Burbar: 200A TPN Alumnium
Busbars Outgoing: 1 No 160A TPN MCCB 5 Nos 63A TPN MCCB 1 No 32A TPN MCCB
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
42 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supply, Transportation unloading, installation, testing and commissioning of SLDB
comprising of the followings and including all other accessories etc., Incomer: 1 No 16A DP
MCB Outgoing: 12 Nos 6/10A SPMCB The Panel shall be complete with iterconnections and
Supply, Transportation unloading, installation, testing and commissioning of Power
TN SOR SI.No- Distribution Board VTPN Type 8 Way comprising of the followings and including all other
19c,P.NO-139 accessories etc., Incomer: 1 No 63A TPN MCCB Outgoing: 4 Nos 32A TPN MCB, 4 Nos 16A SP
MCB The Panel shall be complete with interconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning of Phase
TN SOR SI.No- Segregated 4 Way DB comprising of the followings and including all other accessories etc.,
18a,P.NO-138 Incomer: 1 No 63A TPN MCCB Outgoing: 3 Nos 25A TPN MCCB, 12 Nos 6/16A SP MCCB The
Panel shall be complete with interconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning of Phase
Segregated 6 Way DB comprising of the followings and including all other accessories etc.,
Incomer: 1 No 63A TPN MCCB Outgoing: 3 Nos 25A TPN MCCB, 18 Nos 6/16A SP MCCB The
Panel shall be complete with interconnections and earthing etc.,
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing
282 masonry enclosure with cover plate having locking arrangement and watering pipe etc. with Set 8.00 3,815.97 30,528.00
charcoal / coke and salt as required. (Electrical SOR: Item No:5.2)
Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories, and
PSR Code providing masonry enclosure with cover plate having locking arrangement and watering
No:5.4 pipe of 2.7 meter long etc.but with charcoal / coke and salt as required. (Electrical SOR: Item
Supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground as strip earth
PSR Code electrode , including connection/ terminating with nut , bolt, spring , washer etc.as required.
No:5.8 (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer
spached at 50mm) (Electrical SOR: Item No:5.8)
PSR Code Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as
No:5.17 required (Electrical SOR: Item No:5.17)
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium
286 cable as per specification confirming to IS:7098 (Part - I)./1554-I -
Digitally signed by
d 31/2 x 70 Sqmm Meter DEEPAK
43 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of
287 following size direct in ground including excavation , sand cushioning, protective covering Meter 1,270.00 263.60 3,34,766.00
and refilling the trench etc.as required - Upto 35 sq.mm. (Electrical SOR: Item No:7.1.1)
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of
PSR Code following size direct in ground including excavation , sand cushioning, protective covering
No:7.1.2 and refilling the trench etc.as required - above 35 sq.mm and upto 95 sq.mm (Electrical
SOR: Item No:7.1.2)
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of
PSR Code following size direct in ground including excavation , sand cushioning, protective covering
No:7.1.3 and refilling the trench etc.as required - above 95 sq.mm and upto 185 sq.mm (Electrical
SOR: Item No:7.1.3)
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of
PSR Code following size direct in ground including excavation , sand cushioning, protective covering
No:7.1.4 and refilling the trench etc.as required - above 185 sq.mm and upto 400 sq.mm (Electrical
SOR: Item No:7.1.4)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
291 kV grade of following size on wall surface as required - upto 35 sq.mm (clamped with 1mm Meter 1,270.00 20.12 25,556.00
thick saddle) (Electrical SOR: Item No:7.7.1)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
292 kV grade of following size on wall surface as required - above 35 sq.mm and upto 95 Meter 515.00 56.57 29,131.00
sq.mm (clamped with 25 x3mm MS flat clamp) (Electrical SOR: Item No:7.7.2)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
293 kV grade of following size on wall surface as required - above 95 sq.mm and upto 185 Meter 50.00 66.35 3,318.00
sq.mm (clamped with 25 / 40 x 3mm MS flat clamp) (Electrical SOR: Item No:7.7.3)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
294 kV grade of following size on wall surface as required - above 185 sq.mm and upto 400 Meter 250.00 96.71 24,178.00
sq.mm (clamped with 25 / 40 x 3mm MS flat clamp) (Electrical SOR: Item No:7.7.4)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
44 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
295 kV grade of following size on cable tray as required - upto 35 sq.mm (clamped with 1 mm Meter 25.00 16.93 423.00
thick saddle) (Electrical SOR: Item No:7.8.1)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
296 kV grade of following size on cable tray as required - above 35 sq.mm and upto 95 sq.mm Meter 25.00 39.31 983.00
(clamped with 1 mm thick saddle) (Electrical SOR: Item No:7.8.2)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
297 kV grade of following size on cable tray as required - above 95 sq.mm and upto 185 sq.mm Meter 25.00 49.09 1,227.00
(clamped with 25 / 40 x 3mm MS flat clamp) (Electrical SOR: Item No:7.8.3)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
298 kV grade of following size on cable tray as required - above 185 sq.mm and upto 400 Meter 25.00 78.16 1,954.00
sq.mm (clamped with 25 / 40 x 3mm MS flat clamp) (Electrical SOR: Item No:7.8.4)
Supplying and making end termination with brass compression gland and aluminium lugs
299 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of Nos 38.00 84.39 3,207.00
1.1 kV grade as required - 4 X16 sq.mm (28 mm) (Electrical SOR: Item No:9.1.33)
Supplying and making end termination with brass compression gland and aluminium lugs
300 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of Nos 20.00 86.59 1,732.00
1.1 kV grade as required - 4 X25 sq.mm (28 mm) (Electrical SOR: Item No:9.1.34)
Supplying and making end termination with brass compression gland and aluminium lugs
301 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of Nos 8.00 104.36 835.00
1.1 kV grade as required - 31/2 X35 sq.mm (32 mm) (Electrical SOR: Item No:9.1.21)
Supplying and making end termination with brass compression gland and aluminium lugs
302 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of Nos 2.00 109.88 220.00
1.1 kV grade as required - 31/2 X50 sq.mm (28 mm) (Electrical SOR: Item No:9.1.22)
Supplying and making end termination with brass compression gland and aluminium lugs
303 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of Nos 6.00 118.82 713.00
1.1 kV grade as required - 31/2 X70 sq.mm (38 mm) (Electrical SOR: Item No:9.1.23)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
45 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supplying and making end termination with brass compression gland and aluminium lugs
304 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of Nos 2.00 153.51 307.00
1.1 kV grade as required - 31/2 X95 sq.mm (45 mm) (Electrical SOR: Item No:9.1.24)
Supplying and making end termination with brass compression gland and aluminium lugs
305 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of Nos 2.00 178.85 358.00
1.1 kV grade as required - 31/2 X150 sq.mm (50 mm) (Electrical SOR: Item No:9.1.26)
Supplying and making end termination with brass compression gland and aluminium lugs
306 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of Nos 18.00 313.70 5,647.00
1.1 kV grade as required - 31/2 X300 sq.mm (70 mm) (Electrical SOR: Item No:9.1.30)
Supply of Early Streamer Emission Air Terminal (ESEAT). Model: L The ESEAT has corrosion
resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of
working in hazardous atmosphere. The Air terminal is non-radioactive and requires no
special licensing. The unit is fully autonomous (no battery, no external power supply is
required), collects energy from the ambient electric field.The ESEAT model has been tested in
TN SOR SI.No- a high voltage laboratory in accordance with NFC 17 102 in order to measure the average
5a,P.NO-150 gain in triggering. The average gain in triggering time (ΔTs) obtained during the lab test for
the offered model is 60 µs. The ESEAT works on negative as well as positively polarized
discharges. ESEAT has been tested for such discharges in Central Power Research Institute
(CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request (Page
No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : L -
Radius of protection : 86 Metres Level of protection considered for the Project-II leve
MOUNTING STRUCTURE Supply of Standard / Special Mounting Structure of height 4.5 mts.
308 pipe, and 300 x 300 x 8mm MS plate, 3 mts. 48mm OD class C GI outer pipe,1.8 mtr, 38mm OD Nos 1.00 23,452.50 23,453.00
inner pipe, for roof mounting on concrete base and with FRP adapter
DOWN CONDUCTOR Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary
309 clamps / supports on wall / floor / ground Rm 10.00 135.70 1,357.00
for earth connection
TN SOR SI.No- TEST LINK Supply of Test Link Box for each Down conductor in order
5e,P.NO-151 to disconnect the earth termination system to enable measurement of resistance
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
46 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
EARTH ELECTRODE Supply and insallation maintenance free GI Earthing System comprising
TN SOR SI.No- of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron
5f,P.NO-151 bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable
SURGE PROTECTION Supply and insallation Cabinet Type Class 1 and 2 Combined Model
TN SOR SI.No- SPD to arrest surges and overvoltages in the power line due to lighning switching action etc.
5g,P.NO-151 they must be installed in the incoming MCC panel / DB of the respective buling in parallel to
the power circuit. Model: PSV4-12.5/400TT (3 phase power network)
Sub Total For Outdoor Electrical Works = 55,03,398.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
47 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Supplying of 3 phase, 415 volts, 50 cycles, 0.8 power factor for electric starting diesel
generator comprising the following units:- (Kirloskar/Leyland/Ruston/ Greaves Cotton/
Cummins make) water cooled and shall be of multi stroke, multi cylinders, cold starting,
developing not less than 309 BHP under normal temperature and pressure. The engine shall
conform to I.S. 10002 with latest amendments. It shall be capable of taking 10% over load for
one hour in every 12 hours of continous operation including 6 Nos. of anti vibration pads.The
engine shall be complete with the following accessories:Electrical starting provision, engine
cooling fan, fuel and lubricating oil filters, oil bath, air filter, lub oil pressure gauge 400 litres
capacity fuel tank mounted with engine, hour meter with exhaust manifold, flexible pipe, 12
/24 volts electric starting equipment complete with starter, alternator and two numbers of
12 volts with 25 plates battery of make AMCO/ STANDARD/ EXIDE/ DAGANITE (with
Guarantee cards) of adequate capacity and low lubricating oil pressure/high temperature
varying engine shut down devices.
The Acoustic enclosure shall have the following: Acoustic enclosure shall be powder coated
and fabricated out of 16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type
construction. Powder coating is done after seven tank surface preparation process of sheet
metal. Canopy panel and doors shall have inside lining of FIRE-RETARDANT foam/Rock Wool
as acoustic material. Four hinged doors shall be provided to canopy, one door shall have glass
window for control panel.Base frame is fabricated either in ISMC channel or in sheet metal.
The base frame is rugged in construction and designed for mounting engine and alternator,
with cross members mounted on AVM. The base frame shall have provision for mounting of
acoustic enclosure and it is having provision of lifting hook for convenient lifting of complete
set, i.e. along with canopy, engine and alternator.Fuel tank shall be fabricated out of 14 SWG
CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet
connections of suitable capacity.The Acoustic enclosure shall be Type test approved as per
CPCB norms. The average sound level, when measure in green field condition (ISO m3744 OR
8528 PT 10) at 1-meter distance from all four sides shall be less than 75-dBA average or as
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
48 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
The exhaust gasses shall be taken out through a suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy, fabricated welded construction, channel iron /
sheet metal base frame for mounting the above engine and alternator.Standard Tools and
Spares:Double ended spanners complete set (small and big size sets) - 12 Nos.
(TAPARIA/GEDORGE/EVEREST make)Screw driver (30cm long) Taparia make .Screw driver
(45cm long) Taparia make .Cutting plyer.Diesel filter with elements - 2 Nos.Oil filter with
elements - 1 No.All the above accessories with complete set.AlternatorThe alternator shall be
of Crompton/Kirloskar/ Stamford/ELGI make, self excited, self regulated, screen protected,
drip proof alternator with static excitation system capable of developing 250 KVA at 0.8
power factor 415 volts, 3 phase, 50 cycles, generally conforming to I.S.4722 under normal
condition, the voltage regulation will be plus or minus 5% of rated voltage. It shall be with
end shield/ball roller bearings complete.Control PanelA wall/pedestal mounting (cubical
type ) fabricated sheet steel construction suitable for manual operation, rated for system
output incorporating the following devices/instruments. The panel is made of 1.6mm sheet
Marking earth pit of G.I. pipe for earthing pit with 40mm dia.G.I.pipe medium class of length
3.05m perforated with 46 nos of 12mm dia .holes,pipe lowered in bore holes of 150mm dia
314 and filled in with charcoal and salt in alternative layer of 300mm,the top of G.I.pipe shall be No 5.00 3,815.97 19,080.00
clamped Earth pit shall be provided with 60cm dia precast ring with 60cm depth alround
covered with R.C.C precast slab etc as per I.E.Standards.
Providing & Fixing of suitable MS exhaust pipe including 2 Nos of MS bends(long),7 Nos of
MS flanges, MS pipe class B - 5 Rm as flexible exhaust pipe. The rate is inclusive of
Approved transportation charges for shifting of welding machine and gas cutting set to
Rate site,consumption of welding rod 10 SWG and cutting gas,providing fasteners of 10mm
bolts/nuts/washers and flange gaskets including labour charges etc. asper IE standard -
65mm dia exhaust Pipe (Up to 625 KVA)
Providing & Laying of aluminium cladding with 50mm thick glass wool slab with chicken
316 mesh and covered with 24 SWG aluminium sheet (the rate includes double calculation for Sqm 4.00 1,550.00 6,200.00
flanges & bends) asper I.E.standards
Approved Supplying & Fixing of copper flat (25x3mm) for earthing arrangements including bolts and
Rate nuts etc.
318 Supplying & Laying of 3.5x300 sqmm underground aluminium PVC Cable Meter 53.00 1,829.00 96,937.00
PSR Code Providing and termination of cable joint with suitable cable gland,cable socket etc.,complete -
No:9.1.16 3.5x300 sqmm cable
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
49 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Design,fabrication and supply of 250 KVA DG Set AMF (Auto Main Failure) control panel with
EB Service and it consists of the following parts 1.200A 4P Power conductor L&T -2
Nos,2.24V Battery Charger - NHP - 1Nos,3.Auxiliary Relay - PLA-6 Nos,Auxiliary Conductor
Approved C&S - 4 Nos,5.Indication Lamp 12 Nos idea- 12 Nos,6.Push Button - Rass controll-
Rate 2Nos,7.Selector Switch - Slazer - 4 Nos,8.Earth fault Relay-Electronic - 1 Nos,9. Multi function
Meter - Rizhab - 1No,10.Timer - Eapl- 2 Nos,11.LVM - L&T- 1No,12.30x10 Aluminium Bus
bar,13.Necessary Power & Control wiring,14.Cubical made of 16/18 CRC Sheet with siemens
grey power coat
Sub total for Generator = 19,82,697.00
Passenger Lift (8 Pax)
Passenger Lift : Supply,Installation,Testing and ; Commissioning of Electric Traction ;
Passenger Lift of Makes : As per list ; of recommended brands. ; with; Rated capacity :- 8
Passenger/544Kg ; Floors :- G+1 floor (2Stops/2 Landings) ; Travel :- 3 to 4.2 mtrs ;
Location of Lift Machine:- MRL Rated speed :- 1.0mps VS ; Doors type :- COPO/TOPO Doors
with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade
sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door
architraves/frames Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with
hairline finish with frame made from MS girders, bracing of adequate size with minimum
safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED
lights blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency
light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous
indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant
key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system
with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of ......mm wide
Sub total for Passenger Lift = 26,20,000.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
50 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
NAME OF THE PROJECT: CONSTRUCTION OF SHOPPING MALL IN THE OLD JAIL COMPLEX ON THE NORTHERN SIDE OF THE GOUBERT MARKET AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Amount
Design, Supply, and delivery of 11KV,630KVA,Outdoor Compact Sub Station (In compliance
of IEC 6221-202) consisting of the following : i)HT SWITCH GEARS: 11KV 630Amps 21KA for
3 sec.SF6 insulated copper bus bar Non Extensible Ring Main Unit (Type CVC) consisting of
two nos of remote operated motorised Load Braek Switches and One No.of Fixed remotely
motorised operated vaccum circuit breaker unit.ii)TRANSFORMER: Three Phase 50HZ,core
type two winding,630KVA 11KV/433V DY n11 cast resin dry type,AN type distribution
transformer.iii)LT PANEL; 433LT Inddor panel with 1000Amps AL busbar 100% for phase &
322 50% for neutral complete with internal wiring consisting of following:(A) LT Incomer from Set 1.00 30,35,550.00 30,35,550.00
Transformer-1000Amps 433V 4P 50HZ 50KA remote Wireless signal based electrically
operated type Air Circuit Breaker (ACB)&(B)LT Outgoing- (a)400 Amps 433V 3P 50HZ 36KA
,TPN MCCB -4Nos.(b)125 Amps 433V 3P 50HZ 36KA TPN MCCB 2Nos.iv)OUTDOOR
ENCLOSURE: Outdoor type enclosure having construction of galvanised sheet steel of
thickness minimum 2mm &base plate should be 4mm thick the enclosure shall have IP54
degree of protection.v)Interconnection & Earthing: Interconnection between HT switch gear
& transformer ,Interconnection between LT switch gear & transformer.internal earthing
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing
323 masonry enclosure with cover plate having locking arrangement and watering pipe etc. with Set 2.00 3,815.97 7,632.00
charcoal / coke and salt as required. (Electrical SOR: Item No:5.2)
Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories, and
PSR Code providing masonry enclosure with cover plate having locking arrangement and watering
No:5.4 pipe of 2.7 meter long etc.but with charcoal / coke and salt as required. (Electrical SOR: Item
Supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground as strip earth
PSR Code electrode , including connection/ terminating with nut , bolt, spring , washer etc.as required.
No:5.8 (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer
spached at 50mm) (Electrical SOR: Item No:5.8)
PSR Code Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as
No:5.17 required (Electrical SOR: Item No:5.17)
Sub total for Transformer = 30,99,732.00
Total of Electrical Works = 1,49,86,446.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
51 of 52 KUMAR MEHRA Date: 2023.03.18 14:08:43
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT Shopping Mall.pdf
Tender Document
GCC 2022.pdf
Tender Document
SCC .pdf
Tender Document
Integrity Pact.pdf
Tender Document
List of Approved Makes.pdf
Tender Document
Tender Drawing.pdf
Tender Document
Technical Specification.pdf
Tender Document
Addendum 01.pdf
Tender Document
Tender BOQ.pdf
Tender Document
corrigendum-1504-Corrigendum 05.pdf
pdf • 0.06 MB
corrigendum-1464-Corrigendum 04.pdf
pdf • 0.06 MB
corrigendum-1450-Corrigendum 03.pdf
pdf • 0.06 MB
corrigendum-1437-Corrigendum 02.pdf
pdf • 0.06 MB
addendum-607a723ca0e7-Addendum_01.pdf
pdf • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .