REPAIR/ REPLACEMENT OF INTERNAL ELECTRIFICATION INCLUDING DAY TO DAY MAINTENANCE AND BLDG EARTHINGS AT VARIOUS OTM AND MD ACCN AT ANARWALA UNDER AGE E/M-II OF GE DEHRADUN

One light/fan/bell point, controlled by one way switch.

One fan point, controlled by one way switch through regulator.

One bell point, controlled by bell push switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board.

Description all as per Item No 1 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

Description all as per Item No 1 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 4.0 sq mm PVC insulated FRLS copper conductor and 4.0 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

Material and labour for point wiring using approved colour coding as per IS, with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through existing concealed/surface conduit any type or size complete including pressed iron/steel suction box of thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for sunken boxes after taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : The wiring to be done as per IE rule and as per colour code.

One light point, controlled by one way switch.

One fan point, controlled by one way switch through regulator.

One bell point, controlled by bell push switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

Description all as per Item No 2 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

Description all as per Item No 2 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 4.0 sq mm PVC insulated FRLS copper conductor and 4.0 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire.

2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire.

Material and labour for sub main wiring with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded drawn in existing concealed conduit any type or size including one single core green colour PVC insulated unsheathed cable FRLSH copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. NOTE : - (i) 3 runs of PVC copper cable shall be measured as one unit length.

2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire.

2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire.

Supply and fixing of switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fixing of socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed.

Supply and fixing of switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed.

Supply and fixing of socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed.

Supply and fixing of bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fixing of calling bell ding dong type AC 230 Volt single pole complete all as specified and directed.

Supply and fixing of stepped type regulator socket type, 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fixing of ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fixing of energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed.

Supply and fixing of energy efficient LED tube light fittings 10 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing of LED luminaire 600 mm x 600 mm, 35/36 watt, (White/ warm white as per user equirement at site) 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing of LED building security light fitting 35 Watt 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, nuts & washers of min 1.2 mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified including taking out old u/s fitting complete all as specified and directed.

Supply and fixing of distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including connection with suitable size copper lugs/thimbles/glands including taking down existing unserviciable DBs including MCBs complete all as specified and directed. Note:- DB and MCB shall be of same make.

Supply and fixing of MCB single pole and neutral 240 volt 10 KA 40 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fixing of MCB single pole 240 volt 10 KA 6- 32 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply, laying, jointing and testing of underground XLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs including taking out existing unserviceable of any size/ type complete for the following cables of cross sectional area complete all as specified and directed: Notes: (a) Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately. (b) Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses. (c) Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor.

10.0 Sqmm, 4 core.

16.0 Sqmm, 4 core.

25.0 Sqmm, 4 core.

Excavation in trenches in any type of soil not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for laying of cable, foundation etc and getting out complete all as specified and directed.

Material and labour for supply and filling sand with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed. NOTE: - Punned thickness shall be measurement & paid.

Material and labour for sub class B bricks well burnt of size 23 x 11.5 x 7.5 cm for protection of UG cable laid dry flat over the cable width wise across the length of the cable and abutting each other with gap less than 10mm between the adjacent bricks in trenches complete all as specified and directed

Returning, filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed

Removing of excavated soil to a distance n exc 50 mtr and deposited where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed

Supply and laying in replacement GI tubing light grade with all fittings and accessories for protection of cables on ploe/ wall or under road crossings including clamps, nuts, bolts etc of size 50 mm complete all as specified and directed

Supply and fixing of energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed.

Supply and fixing of energy efficient LED tube light fittings 10 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed.

Supply and fixing of LED building security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete voltage surge protection of 4kv & with 3 core 1.5 sqmm PVC insulated cable complete all as specified including dismantling existing light fitting complete all as specified and directed.

Supply and fixing of LED luminaire 600 mm x 600 mm, 35/36 watt, (White/ warm white as per user equirement at site) 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size including dismantling existing light fitting complete all as specified and directed.

Supply and fixing of surface mouting PVC gang box of super quality for one switches with one /two holes complete including dismantling existing fitting complete all as specified and directed.

Supply and fixing of surface mouting PVC gang box of super quality for three switches with two /four holes complete including dismantling existing fitting complete all as specified and directed.

Supply and fixing of surface mouting PVC gang box of super quality for five to six switches with four /six holes complete including dismantling existing fitting complete all as specified and directed.

Supply and fixing of Plug Top, 3Pin,15 A with indicator, ISI Marked complete including dismantling existing complete all as specified and directed.

Supply and fixing of PVC insulated & unshethed copper multisranded FRLSH cable of size 1.5 sqmm including dismantling existing complete all as directed.

Supply and fixing of PVC insulated & unshethed copper multisranded FRLS cable of size 2.5 sqmm including dismantling existing complete all as specified and directed.

Supply and fixing of PVC insulated & unshethed copper multisranded FRLS cable of size 4.0 sqmm including dismantling existing complete all as specified and directed.

Supply and fixing of GI bracket made out of 40 mm GI pipe medium grade bend for fabrication to shape as required length of pipe 1.2 mtr with necessary fixing arrangement by means of MS clamps 02 Nos not less than 50x6 mm MS flat duly painted, nuts, bolts and washer including dismantling existing complete all as specified and directed.

Supply and fixing of flood light, 120 W, Outdoor type with high power LED's as light sources energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control grar woth IP66,CCT :5700K,Efficacy : 100 Im/W, Impact resitace of IK07 and integrated driver with 5 KV inbuilt surge protection complete including taking out old unserviceable fitting complete all as specified and directed.

Supply and fixing of energy saving, surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprrising of high brightness LEDs complete including taking out old unserviceable fitting complete all as specified and directed.

Supply and fixing of Distribution box MCB protected socket with plastic enclosure (Surface mounting) 20 Amp MCB DBOXX Combo DP including plug top including taking out old unserviceable fitting complete all as specified and directed.

Supply and fixing of distribution board vertical type TPN 4 Way double door,IP -43protection suitable for MCCB 100 to160 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process including taking out old unserviceable DB complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make and paid separetaly.

Supply and fixing of MCCB 415 Volt, 16 KA, 4 pole 63 Amp adjustable thermal and fixed magnetic type 1CS=100% ICS complete including taking out old unserviceable all as specified and directed.

Supply and fixing of MCB, single pole 240 Volt, C curve 10 KA ISI Marked 5 to 32 Amps including connection with suitable size copper lugs including taking out old unserviceable all as specified and directed.

Supply and fixing of MCB, SPN, 240 Volt, C curve 10 KA ISI Marked, 20-32 Ampsincluding connection with suitable size copper lugs including taking out old unserviceable all as specified and directed.

Supply and fixing of MCB , TPN, 415 Volt, C curve 10 KA ISI Marked, 63Amps including connection with suitable size copper lugs including taking out old unserviceable all as specified and directed.

Supply and fix in replacement exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm, complete all as specified and directed.

Supply and fix in replacement exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250 mm, complete all as specified and directed.

Supply and fixing of switch piano flush type single pole one way 230 Volts 6 Amp complete including taking out old unserviceable all as specified and directed.

Supply and fixing of socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete including taking out old unserviceable all as directed.

Supply and fixing of switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete including taking out old unserviceable all as specified and directed.

Supply and fixing of socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete including taking out old unserviceable all as specified and directed.

Supply and fixing of white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 5 x 5 inch including taking out old unserviceable all as specified and directed.

Supply and fixing of white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 8 x 5 inch including taking out old unserviceable all as specified and directed.

Supply and fixing of white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 9 x 6inch including taking out old unserviceable all as specified and directed.

Supply and fixing of white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 9x 11 inch including taking out old unserviceable all as specified and directed.

Supply and fixing of r metal box of thickness 1.2 mm and of size 4 x 4 inch including all civil work required for making good the disturbed surface including taking out old unserviceable all as specified and directed.

Supply and fixing of r of metal box of thickness 1.2 mm and of size 7 x 4 inch including all civil work required for making good the disturbed surface including taking out old unserviceable all as specified and directed.

Supply and fixing in repair of metal box of thickness 1.2 mm and of size 8 x 5 inch including all civil work required for making good the disturbed surface including taking out old unserviceable all as specified and directed.

Supply and fixing in repair of metal box of thickness 1.2 mm and of size 8 x 10 inch including all civil work required for making good the disturbed surface including taking out old unserviceable all as specified and directed.

Disconnecting and taking down existing unserviceable geyser of any description and capacity (25/50 Ltr.) including water and electric connections and reinstallation at same locations after repairs, cleaning and descaling complete all as specified and directed Note : (i) Major spare parts shall be measured and paid separately under relevant item. (ii) Item shall be measured and paid only when spares required to make the geyser serviceable is NIL.

Supply and fixing in replacement new water tank steel inner shell with EPAC coated steel inner tank having minimum 8 kg/cm2 pressure bearing capacity of cap 25 ltr geyser having wall thickness not less than 1 mm complete all as directed

Supply and fixing in replacement new water tank steel inner shell with EPAC coated steel inner tank having minimum 8 kg/cm2 pressure bearing capacity of cap 50 ltr geyser having wall thicness notless than 1 mm complete all as specified and directed

Supply and fixing in replacement heating element square/ triangular/ fine threaded type or an existing shape of capacity 1.5 KW ISI mark complete all as specified and directed.

Supply and fixing in replacement heating element square/ triangular/ fine threaded type or an existing shape of capacity 2 KW ISI mark complete all as specified and directed.

Supply and fixing in replacement thermostat assembly of range 200 C to 850 C of any description suitable for 25/50 Ltr cap geysers ISI mark complete all as specified and directed.

Supply and fixing in replacement indicator lamp 230 Volt of red and green (circular/rectangular type) complete all as specified and directed.

Supply and fixing in replacement new flange assembly of any description made up of copper/brass any type or hole (6/7/9 hole) complete with safety valve for geyser of cap 25 ltr ISI mark complete all as specified and directed.

Supply and fixing in replacement new flange assembly of any description made up of copper/brass any type or hole (6/7/9 hole) complete with safety valve for geyser of cap 50 ltr ISI mark complete all as specified and directed.

Supply and fixing in replacement PVC connection nylon breaded complete with brass coupling/union rubber washers etc 450mm long suitable for 15mm dia complete all as specified and directed.

Material and labour for preparation of surfaces of geyser of 25 ltr cap of any description by applying filler compound and applying two coats of synthetic enamel white paint complete incl writing MES no with black paint height not less than 20mm in the style/pattern as approved and directed.

Supply and fixing in repair of Ball bearing campack type 6201-2Z, complete all as specified and as directed.

Supply and fixing in repair of Ball bearing campack type 6202-2Z, complete all as specified and as directed. Make SKF/TATA/NBC

Supply and fixing in repair of Ball bearing campack type 6203-2Z, complete all as specified and directed. Make SKF/TATA/NBC

Supply and fixing in repair of capacitor ceiling fan of capacity 2.5 mfd (PVC body) + 5%, 440 volts 50 Hz IS - 1709 AAPHS T-Max 850 C, complete all as specified and directed.

Supply and fixing in repair of capacitor ceiling fan of capacity 3.15 mfd (PVC body) + 5%, 440 volts 50 Hz IS - 1709 AAPHS T-Max 850 C complete all as specified and directed.

Material and labour for two coats of painting of ceiling fan with blade sets of any make sweep complete on site or store with synthetic supper enamel white paint of approved make by brush painting and filling with filler including preparation of surface fan blade (set of three) complete all as specified and directed.

Supply and fixing of hanging clamp of ceiling fan with nut, bolt, rubber reel insulator and split pin including taking out old unserviceable complete all as specified and directed.

Material and labour in replacement for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh, 50 mm thick precast RCC 1:2:4 type B1using 20 mm graded stone aggregate , reinforced with 8 mm dia dedormed /TMT bars 3 nos both way 12 mm dia round bar handle and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 2009 (Part-I) complete all as specified and as directed. Note :- (i) Earth lead wire and its protection pipe upto and including 7.50 mtr only from top of earth electrode are included under this item. (ii) On testing if the earth resistance is not obtained within permissible limit, earthing will be re-done at NO extra cost ,till the desired earth resistance is obtained. (iii) Any joint in earth lead from earth electrode to test point shall not be allowed/permitted.

NOTE:- Amount of credit of Rs.153021.00 for retrieved materials is mentioned in Schedule of Credit Page No 24 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Please Enable Macros to View BoQ information