Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAccepted-AOC | ₹13.5 L | L1 | Accepted-AOC L1 - LOWEST TENDER |
| 2 | Rejected-Technical | - | - | Rejected-Technical L2 |
| 3 | Rejected-Technical | - | - | Rejected-Technical L4 |
| 4 | Rejected-Technical JARATHA CORNER LAKSHAM VEEDU COLONY ROAD | THENI | TAMIL NADU | 625203 | - | - | Rejected-Technical L3 |
| Sl No | Description | Qty | Unit | Johny KT L2 | P D JOY L4 | BASHEER T.A L1 | RadhaKrishnan V K L3 |
|---|---|---|---|---|---|---|---|
| 1.00New building. | |||||||
| 1.00 | 15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. | 2.43 | cum | 3,671.89 ₹8,930.04 | 3,671.89 ₹8,930.04 | 3,561.73 ₹8,662.13 Lowest | 3,782.05 ₹9,197.95 |
| 1.00 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 2.33 | cum | 2,129.84 ₹4,951.88 | 2,129.84 ₹4,951.88 | 2,065.94 ₹4,803.31 Lowest | 2,193.74 ₹5,100.45 |
| 1.00 | 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | 80.64 | sqm | 1,008.55 ₹81,329.47 | 1,008.55 ₹81,329.47 | 978.29 ₹78,889.31 Lowest | 1,038.81 ₹83,769.64 |
| 1.00 | 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 6.91 | cum | 12,772.18 ₹88,281.31 | 12,772.18 ₹88,281.31 | 12,389.01 ₹85,632.84 Lowest | 13,155.35 ₹90,929.78 |
| 1.00 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 24.04 | cum | 7,279.03 ₹1,74,958.77 | 7,279.03 ₹1,74,958.77 | 7,060.66 ₹1,69,710.02 Lowest | 7,497.4 ₹1,80,207.51 |
| 1.01 | OD369259/2025-2026:Supplying and fixing Pressed Steel Door of standard pattern with frames as per profile of IS:4351 of section 105*60mm using 18G (1.2mm thick CRCA) sheet and shutters made of section 75*30mm of outer styles and horizontal members and then inserted with enclosed and stiffened sheet 26CR as per the specification with zinc chromate primer including all charges of fittings, conveyance etc, complete.steel door of size 120*210 cms | 2.52 | 1 sqm | 5,518.04 ₹13,905.46 | 5,518.04 ₹13,905.46 | 5,352.5 ₹13,488.3 Lowest | 5,683.58 ₹14,322.62 |
| 1.01 | OD369261/2025-2026:Supplying and fixing Pressed Steel Windows and Ventilators of standard pattern with frames with glazed shutters 4 mm thick plane glass as per profile of sections 82*62mm, 12mm dia. rod at 10 cm c/c, 25*5mm flat 6 numbers with 75mm M.S hinges, 50mm M.S hook, 125mm M.S stay and handle for windows with section 105*60mm without steel shutters, made of sections 75*30mm for outer styles and horizontal members and then inserted with enclosed and stiffened sheet 26CR with zinc chromate primer.(data derived for 150 x150 cms three panelled) | 9 | per sqm | 6,283.44 ₹56,550.96 | 6,283.44 ₹56,550.96 | 6,094.94 ₹54,854.46 Lowest | 6,471.94 ₹58,247.46 |
| 1.01 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 70.84 | sqm | 762.88 ₹54,042.42 | 762.88 ₹54,042.42 | 739.99 ₹52,420.89 Lowest | 785.77 ₹55,663.95 |
| 1.01 | 5.9.19:Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges | 18.48 | sqm | 1,021.94 ₹18,885.45 | 1,021.94 ₹18,885.45 | 991.28 ₹18,318.85 Lowest | 1,052.6 ₹19,452.05 |
Tender Value
₹14.0 L
EMD Value
₹34,893
Closing Date
15 Jun 2026, 6:00 pmClosed
EXECUTIVE ENGINEER
L.S.G.D DIVISION DISTRICT PANCHAYATH THRISSUR
131966 LAC-ADS-Irinjalakuda LA, Velookkara GP, 2024-25, Construction of Building for Kaduppaserry A K G Vayanasla (Reg No 6441/2003) Vellangallur BP -In Vellangallur BP-General Civil Work
2026_LSGD_853310_20
TN 1/26-27
Open Tender
Civil Works - Buildings
Item Rate
365 days
AYYANTHOLE
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹34,893
Yes
17 Aug 2026
30 May 2026
17 Jun 2026
30 May 2026
15 Jun 2026
30 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1New building. | |||||
| 1.001 | 15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. | 1 | cum | - | - |
| 1.002 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | - | cum | - | - |
| 1.003 | 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | - | sqm | - | - |
| 1.004 | 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.005 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | - | cum | - | - |
| 1.006 | OD369259/2025-2026:Supplying and fixing Pressed Steel Door of standard pattern with frames as per profile of IS:4351 of section 105*60mm using 18G (1.2mm thick CRCA) sheet and shutters made of section 75*30mm of outer styles and horizontal members and then inserted with enclosed and stiffened sheet 26CR as per the specification with zinc chromate primer including all charges of fittings, conveyance etc, complete.steel door of size 120*210 cms | - | 1 sqm | - | - |
| 1.007 | OD369261/2025-2026:Supplying and fixing Pressed Steel Windows and Ventilators of standard pattern with frames with glazed shutters 4 mm thick plane glass as per profile of sections 82*62mm, 12mm dia. rod at 10 cm c/c, 25*5mm flat 6 numbers with 75mm M.S hinges, 50mm M.S hook, 125mm M.S stay and handle for windows with section 105*60mm without steel shutters, made of sections 75*30mm for outer styles and horizontal members and then inserted with enclosed and stiffened sheet 26CR with zinc chromate primer.(data derived for 150 x150 cms three panelled) | - | per sqm | - | - |
| 1.008 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | - | sqm | - | - |
| 1.009 | 5.9.19:Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges | - | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1442192.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.03 MB
viewnit131966.pdf
Tender Documents • 0.03 MB
viewsbd131966.pdf
Tender Documents • 1.94 MB
BOQ_1442192.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .