Providing Streetlights from Sravan Chokadi to GAIL township at-Bharuch

Name Of Work :- Providing Streetlights from Sravan chokadi to GAIL township at-Bharuch

Qty. Unit Unit Rate with 1% L.S. Per Amount

900 Mtr 1 Supplying and erecting Flexible PVC insulated 75.75 Mtr

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

directed.(h) 2.50 Sq.mm 3 core round PVC

120 Nos 2 Supplying and erecting LED street light / Flood 5976.17 Mtr

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection. (iv) (iii) Above

to 90 watts Cat-lll

2 Nos 3 Providing and erecting Approved make Four 6173.12 Ea

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having

normal current rating up to 25 A to 100A. with

Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing.ICS=100% of ICU only.Cat III

120 Nos 4 Providing and erecting Miniature circuit 270.68 Ea

breaker single pole 0.5A to 2A system and

having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III

12 Nos 5 Providing & erecting 240 V MCB double pole 295.93 Ea

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity.(B)

2 Nos 6 Providing & erecting 415V MCB Four Pole 638.32 Ea

Switch for Lighting Load (B curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity (b)40

2 Nos 7 Plastic enclosure fitted with DIN rail suitable for 108.07 Ea

incorporating Three /Four nos. MCB

20 Kg 8 Providing and erecting HOT deep Galvanised 77.77 Kg

iron strip wire 8 to 16 SWG.

60 Nos 9 Providing and erecting Pipe type earthing 368.65 Ea

having 150 cms.long and 2.5 cms. dia.

galvanised iron pipe with coupling and buch

buried in specially prepared earth pit complete

with necessary 8 SWG earth wire.

Schedule - B street light Page

Qty. Unit Unit Rate with 1% L.S. Per Amount

60 Nos 10 For using salt and charcoal / coke as required 171.70 Ea

for pipe type earthing.

4 Nos 11 Supplying & erecting earth pit of minimum bore 4591.46 Ea

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit test

certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 X/ meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be

capable to retain moisture for long time

Necessary test report must be submitted. (a)

For Electrical Installation up to 440V in normal

soil Length of pipe - 1 Mtr Back filling

compound - 1 Nos Bag of 15 Kg.

2 Sq. Mtr 12 Providing & erecting weather proof, dust & 10468.65 Sq. Mtr

vermin proof, floor mounted front operated

indoor type cubical panel board necessary IP-

42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling,

welding, riveting with internal partitions &

cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied

switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end

terminal connection,danger notice

board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy

.(The rates excludes the cost of switchgears, bus

bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with

following approved manufacturers with

following size.(A) locally fabricated panel

board.(i) with 350 mm depth

1600 Mtr 12(a) Providing and erecting XLPE (IS:7098)(I)-88 ISI 140.39 Mtr

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables(C) 4 core 10 Sq. mm

50 Mtr 12(b) .(B) 4 core 25 Sq. mm 190.89 Mtr

Schedule - B street light Page

Qty. Unit Unit Rate with 1% L.S. Per Amount

1350 Mtr 13 Making trench in soft soil of suitable width of 90 55.55 Mtr

cm deep for laying cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

50 Mtr 14 Making trench in Hard Murrum / Tar Road of 74.74 Mtr

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

50 Mtr 15 Supplying following size of Light duty “A” Class 300.98 Mtr

G.I . Pipe & erecting as directed by Engineer-in-

charge. (B) 50 mm dia

1500 Mtr 16 Providing & laying approved make Double 62.62 Mtr

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench

for laying of cable. below ground / road

surface for enclosing cable.(A)50 mm outer dia

8 Nos 17 Providing and, fixing heavy duty flange type 51.51 Ea

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following size

of cables. (E) 2 to 4 core 25 Sq. mm

960 Nos 18 Solder less crimping type Aluminium lugs 13.13 Ea

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

16 Nos 19 Solder less crimping type Aluminium lugs 15.15 Ea

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm.

60 Nos 20 Supplying and erecting approved make 11411.99 Ea

Octagonal pole made from HR sheet steel. The

pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be

erected With Suitable foundation (Included) as

per details given by manufacturer considering

site requirement. (E) 7 Mtr. Long 70 mm Top X

135 mm bottom dia, 3 mm thickness with

225mmX225mmX16mm base plate, 4-M20

Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 67 kg

153.00 Cu.Mtr. 21 Excavating hard rock or bituminous road (B.T.) 599.94 Cu. Mtr.

by chiselling or using tool and tackles for

preparing pit for poles or earth plates or for

laying pipes & clearing the site by removing

debris & making site good. [10 % additional for

using machinery like driller as per SOR]

Schedule - B street light Page

Qty. Unit Unit Rate with 1% L.S. Per Amount

60 Nos 22 Providing and erecting street light pole bracket 829.21 Ea

comprising main B Class GI pipe of

cm/require outside dia. complete with suitable

B Class G.I sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm.

/ require size pole top having sufficient

fasteners for fixing the brackets and having

spread of 1 mtr. length with suitable rise as per

site condition & suitable welded stiffener

reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint.

paint with following nos of arms.[B] Double

Arm Bracket 1 Mtr

2 Nos 23 Supplying & erecting approved make IP 55 17059.91 Ea

grade Company fabricated Timer Panel of

following capacity for switch On-Off street

lights on time scheduling basis made from 16G

CRCA sheet duly epoxy power painted inside

and outside with hinged doors and locking

arrangement consisting of suitable size of 4 Pole

MCB and 4 pole contactor (cat-III)with analog

time switch, auto manual switch of same make

and suitable input and output Bakelite

terminals and with door earthing approved by

Engineer in charge. (C) 63 Amp

2 Nos 24 Supplying and erecting approved make panel 1275.63 Ea

mounting type Digital Voltmeter having 3 digits

LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring

etc .with manufacturers calibration certificate.

8 Nos 25 Supplying and erecting approved make suitable 43.43 Ea

panel indicator LED type lamp, lens cover,

complete erected with necessary connections.

Rupees In Word: Twenty Two Lacs Six Thousand Eight Hundred Eighty Five Rupees only

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender

Deduct………% below

1 The labour cess will be deducted as per prevailing rules i.e. 1% of

2 GST and Income tax TDS will be deducted at a source while

3 In all R.C.C. Items in Rate Analysis Standard Cement

Consumption has been taken as per Govt. G.R.: PRC-10/2017

Above all items of "Schedule-B" with Item Description, Unit,

Deputy Executive

Divisional Account Officer Executive Engineer

BAUDA BAUDA BAUDA

Bharuch Bharuch Bharuch

Schedule - B street light Page