Setting up of Production and Sale Centre at Sohella Bargarh

A. GROUND FLOOR

Earth work in ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge.

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Cement concrete with C.C ( 1:4:8) with 40 mm size metal including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in foundation including cost, conveyance, royality etc complete as direction by EIC.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in foundation including cost, conveyance, royality etc complete as direction by EIC.

R.C.C. work M-20 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying with Centering & shuttering as direction of EIC.

Column Footing (M20)

Pedestal

Column (M20)

Plinth Beam (M20)

Staircase (M20)

Lintel (M20)

Roof Beam (M20)

Roof Slab (M20)

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc complete as direction by EIC..

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete as direction by EIC.

16 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including cost, conveyance, royality of all materials etc complete as direction by EIC.

Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint to interior wall (distmper)surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand papering in all heights etc. complete in all respect.any approved shade including cost conveyance royality etc complete as per direction of EIC

Finishing wall with two coat Weather painting over one coat primmer with approved shade etc complete.

Fixing Vitrified tiles in floors on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Fixing of granite slab in treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

S/F/F of S.Steel railing in 3 rows (top 2" dia one row niddle 3/4" dia in row) with required balustrade & newel post) etc complete as per specification and direction of engineer in charge.

FRIST FLOOR

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in foundation including cost, conveyance, royality etc complete as direction by EIC.

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc complete as direction by EIC..

Column (M20)

Staircase

Lintel

Chajja

Roof Beam (M20)

Roof Slab (M20)

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc complete as direction by EIC..

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete as direction by EIC.

16 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including cost, conveyance, royality of all materials etc complete as direction by EIC.

Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint to interior wall (distmper)surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand papering in all heights etc. complete in all respect.any approved shade including cost conveyance royality etc complete as per direction of EIC

Painting two coat Weather painting over one coat primmer with approved shade omplete in all respect.any approved shade including cost conveyance royality etc complete as per direction of EIC

Fixing Vitrified tiles in floors on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Fixing of granite slab in treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Supplying Fitting and fixing window grills (35x35x5) , shutters etc complete as per specification and direction of engineer in charge..

Painting two coats of enamel paint over a coat of priming including all costs of labour ,Paint, primer, brushes and putty required for the work etc complete and as per direction of Engineer-in-charge.

S/F/F of window and Doors made up aluminium (powder coated) as window frame,section as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement all fitting cost of glass complete and as per direction of Engineer-in-charge.

S/F/F of S.Steel railing in 3 rows (top 2" dia one row niddle 3/4" dia in row) with required balustrade & newel post)

Providing officer's table complete and as per direction of Engineer-in-charge.

Providing Excutive Chairs complete and as per direction of Engineer-in-charge.

Providing officer's Chairs complete and as per direction of Engineer-in-charge.

Providing Splite AC complete and as per direction of Engineer-in-charge.

SECOND FLOOR

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in foundation including cost, conveyance, royality etc complete as direction by EIC.

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc complete as direction by EIC..

Column (M20)

Staircase

Lintel

Chajja

Roof Beam (M20)

Roof Slab (M20)

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc complete as direction by EIC..

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete as direction by EIC.

16 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including cost, conveyance, royality of all materials etc complete as direction by EIC.

Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint to interior wall (distmper)surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand papering in all heights etc. complete in all respect.any approved shade including cost conveyance royality etc complete as per direction of EIC

Painting two coat Weather painting over one coat primmer with approved shade omplete in all respect.any approved shade including cost conveyance royality etc complete as per direction of EIC

Fixing Vitrified tiles in floors on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Fixing of granite slab in treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Supplying Fitting and fixing window grills (35x35x5) , shutters etc complete as per specification and direction of engineer in charge..

Painting two coats of enamel paint over a coat of priming including all costs of labour ,Paint, primer, brushes and putty required for the work etc complete and as per direction of Engineer-in-charge.

S/F/F of window and Doors made up aluminium (powder coated) as window frame,section as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement all fitting cost of glass complete and as per direction of Engineer-in-charge.

S/F/F of S.Steel railing in 3 rows (top 2" dia one row niddle 3/4" dia in row) with required balustrade & newel post)

Provision for Electrification

Provision for PH and Sanitary work

B. INTERIOR WORKS :

DisplayRacks Providing and fixing display racks of 2400mm ht. various sizes in proper position of shelves as per approved design (32mm, 45

0mm depth, side thickness 100mm) with lower drawer system made up of fire retardant ply board and block board of Century/Archid/ Greenply /sonear make, exposed member as per drawing to be finished with 1mm thick laminate of approved make (Marino/Greenlam/Hidesign) and shade and design. The inner unexposed will be finished with 0.8 mm thick laminate and 12mm glass shelves of approved make including all fittings & fixtures complete as direction of Engineer in-charge.

Display Cum sales Counter Providing and fixing 750mm width X 900mm height display counters with side support made up of 19mm ply, 12mm glass table top, side glass and front glass as specified in the drawing of various sizes in proper position, made of 19mm fire retardant ply of Century /Archid / Greenply / Sonear make Exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design. The inner unexposed will be finished with 0.8mm thick laminate complete in all respect as per the direction of Engineer-in-charge.

Display Boxes :

Providing and lfixing in proper position, display boxes, made of 12mm glass as per approved design for display and hanging of hndloom items with cost of all labour & materials with manqueen complete as per direction of Engineer in-charge

Chairs/Stools :

Customers stools/chair of any reputed make complete as per direction of Engineer in-charge

Excutive Chair for Cash Counter of any reputed makecomplete as per direction of Engineer in-charge

GYPSUM FALSE CEILLING:

Providing & fixing gypboard suspended false ceiling with 12.5mm thick MR Ultra Gyp board (Single Layer) Gyproc make with drop ceiling as per approved design with cove light provision for different spaces as per the requirement with G.I. framework(Gypsteel) of perimeter channels, intermediate, channels and ceiling sections) and 12.5mm taped edge gypboard(MR) screw fixed to ceiling section as per design, complete including all cost of materials, labour, overheads T&P etc. complete as per the direction of the Engineer in-charge.

Reception and cash Counter Table Providing and fixing in proper position, curved shape reception table of 2100 mm X 750mm made of 19mm BWP ply with drawers shelves and shutters make in 12/19mm ply as specified in the drawing drawers to be mounted on telescopic channels provision for key boards cable manager, auto hinges handle and drawer locks, exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design with 12mm thick frosted glass on the top as per design. The inner unexposed will be laminated and complete in all respect as per the instruction of Engineer in charge

Providing & Fixing of wall peneling with BWP Block Board/ply laminate with anyLaminart/vinear/mirror etc. finished in all respect as per approved drawing & requirement complete as per direction of Engineer in-charge.

Alluminum Compsite Panel with allumium frame work covering with 1mm exterior grade of approved make finished in all respect with cost of all materials, labour, scafolding etc complete as per direction of Engineer in-charge.

Supply fitting fixing of digital sign board of approved design and lighting system with all cost of material and labour etc. to be provided on the front and back side facet to match the elevation of the building in position as per direction of Engineer in Charge.

Supply & Providing of manqueen as per direction of Engineer in Charge.

ELECTRICAL WORKS.

Supply of all required materials and recessed wiring to circuit/sub-mains with following number & sizes of PVC insulated FRLS 1100v. grade standard copper wire run inside 19mm PVC conduct(14SWG) pipe laid on surface of wall/ceiling and copper wire as earth continuity conductor and complete in all respect including making good to all damages caused and as per the direction of EIC.

Recessed wiring with 2(1x1.5sqm)+1x(1x1.5sqm)copper wire for looping purpose and for AC IDU.

Recessed wring with 2(1x2.5sqm)+1x(1x1.5sqm) copper wire from LDB to SB, and computer point.

Recessed wiring with 2(1x4sqm)+1x(1x2.5sqm) copper wire from LDB to individual 16 Amp socket.

PANNEL & DISTRIBUTION BOARD.

Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of 2 mm thick CR sheet metal cubicle fixed on m.s. channel base, duly acid treated for dusting, primered and painted with 2 coats of powder coating of approved shade dust, damp & vermin proof. Having hinged door and compartmental arrangement for each equipment & busbar chamber on the top of the panel running horizontally having provision for cable conduit entry earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of EIC.

Floor Distribution Board(Main) (As per site condition)

Branch Distribution Board

4 way TPNDB (Double Door), Incoming (40 Amp TPN RCBO – 1 No, Outgoing – 16/32 A SP MCB – 12 Nos.

3 Phase eletrical connection with all require materials.

Supply, delivery, installation, testing and commissioning of the following fittings/fixture complete with all required accessories and lamps on wall/ceiling as per the direction of EIC.

18 watt LED of approved make

30 watt Track Light

Supply fitting of wall mounting speed fans of approved make.

Supply,Installation,Testing , Commissioning of 3 ton Capacity Cassate AC of approved make with all required fittings complete

Providing & Fixing of 2 KVA Invert of any reputed make like USHA/Microtek etc.Including 2 nos Exide Make Battery of required capacity and its accessories.

Providing & Fixing of 2 KVA Voltage Stabilizer of any reputed make according to requirment of the site.

Fire Extinguishers

Provision for fire extinguishers of approved make to be placed in required position as directed by Fire Authority / Engineer in-charge.

Music System

Providing music system to the showroom including fixing of speakers etc

Odinix High Quality 6 watts 103mm dia Ceiling speakers

Ahuja 160 watts Amplifier with Remote and USB Port

Volume Control 6 watt

CC Cemera

16 Channel Real Time Standalone DVR with D1 Resolution on all 8 Channels @400tps, HDMI Port, lH264 Hardware Compression, with 16 video inputs, capacity for installing 2 SATA Hard disks, back up through Disk array and USB Network support with static and dynamic IP. Real time viewing make Crystal.

Night vision camera with 1/3” Sony Super HAD CCD, 1000 TVL resolution, 15 IR LEDs, 15 Mtr IR range, 3.6m IR lens Dome Camera make Crystal.

Samsung LED Monitor 24”