Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-AOC KARINGAPPA CHEERAKUZHIYIL HOUSE PUNNATALA P O MALAPPURAM 676552 | MALAPPURAM | KERALA | 676552 | L1 | Accepted-AOC Agreement executed on 21/10/2025 | |
| 2 | L2₹1.7 L+₹3,413.73 (2.01%)Rejected-Finance KARIPPOL PO MALAPPURAM PIN 676552 | MALAPPURAM | MALAPPURAM | KERALA | 676552 | L2 | Rejected-Finance Higher rate and hence not admitted |
| Sl No | Description | Qty | Unit | Mohamed Rashid L1 | HUSSAIN K L2 |
|---|---|---|---|---|---|
| 1.00maintenance | |||||
| 1.00 | 50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 2.12 | cum | 5,924.88 ₹12,560.75 Lowest | 5,924.88 ₹12,560.75 Lowest |
| 1.00 | 14.17: Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge | 11.12 | sqm | 61.23 ₹680.88 Lowest | 61.23 ₹680.88 Lowest |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 79.3 | sqm | 316.08 ₹25,065.14 Lowest | 316.08 ₹25,065.14 Lowest |
| 1.00 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 90.42 | sqm | 71.1 ₹6,428.86 Lowest | 71.1 ₹6,428.86 Lowest |
| 1.00 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 90.42 | sqm | 152.38 ₹13,778.2 Lowest | 152.38 ₹13,778.2 Lowest |
| 1.01 | OD17766/2025-2026:Supplying and lowering C C Ring with top cover 30x30x45 cm including
conveyance fixing etc | 1 | no | 2,317.22 ₹2,317.22 Lowest | 2,317.22 ₹2,317.22 Lowest |
| 1.01 | 17.9.1:Providing and fixing kitchen sink with C. I brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:White glazed fire clay kitchen sink of size 600x450x250 mm | 1 | each | 3,746.77 ₹3,746.77 Lowest | 3,746.77 ₹3,746.77 Lowest |
| 1.01 | 17.28.1.1:Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.
waste fittings complete.
Semi rigid pipe32 mm dia | 1 | each | 103.9 ₹103.9 Lowest | 103.9 ₹103.9 Lowest |
| 1.01 | 50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | 1 | no | 67.06 ₹67.06 Lowest | 67.06 ₹67.06 Lowest |
Tender Value
₹1.7 L
EMD Value
₹4,237
Closing Date
27 Sept 2025, 4:00 pmClosed
Assistant Engineer
AE lsgd office Athavanad grama panchayath
Athavanad GP- 421/24-25- Rahath Nagar Anganwadi- Improvement in ward 6
2025_LSGD_799519_12
01/AE/ATVD/LSGD/ET/25-26
Open Tender
Civil Works - Others
Item Rate
180 days
Athavanad GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,237
Yes
27 Nov 2025
19 Sept 2025
29 Sept 2025
19 Sept 2025
27 Sept 2025
19 Sept 2025
Amount
maintenance
50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
14.17: Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD17766/2025-2026:Supplying and lowering C C Ring with top cover 30x30x45 cm including conveyance fixing etc
17.9.1:Providing and fixing kitchen sink with C. I brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:White glazed fire clay kitchen sink of size 600x450x250 mm
17.28.1.1:Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. Semi rigid pipe32 mm dia
50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
OD17775/2025-2026:Providing and fixing PVC bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long
50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall
50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall
50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
25.1:Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
21.6:Providing and fixing 6 mm dia. G I level adjusting hangers ( upto 1200 mm length), fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-Charge.
50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)
16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
HUSSAIN K (BID ID -2361757)
Bidder Name
Mohamed Rashid
HUSSAIN K
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1326421.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .