REPAIR/MAINT TO STREET LIGHTS, GARDEN LIGHTS AND HIGH MAST LIGHTS AND CONNECTED WORKS IN NAUSENA BAUGH, NAVAL PARK, AMZARI PARK, MMT AND ALLIED AREAS UNDER AGE E/M-I OF GE (UTILITY-I) VISAKHAPATNAM

Amount

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid.

Supply & laying sub class 'B', class designation 75 bricks of old size, laid along alignment of cable as protection to cable in trenches including taking out old bricks complete all as specified and directed.

Laying only old bricks retrieved while taking out old cable, laid along alignment of cable as protection to cable in trenches complete all as specified and directed. NOTE: Serviceable quantity obtained from taking out shall be reused under this item

S&F 40 mm bore galvanised steel tubing, medium grade with necessary fittings, laid under road crossing / along pole / wall, for cable protection including taking down old GI pipecomplete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd

M&L for cutting the tarmac / hard standings in road and excavating trenches across the road in size not exceeding 0.45 m wide and 0.6 m depth for laying cable including refilling earth & making good top surface of the disturbed portion with 100mm thick PCC 1:3:6 / bituminous mix as per existing & matching with the surroundings complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete including demolition of old PCC complete all as specified and directed.

M&L cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in copings, benching and the like etc. including necessary formwork & demolition of old concrete complete all as specified and directed.

Taking down defective street light fitting of any make / type / capacity from top of pole / walls / high mast at a height not less than 7.0 m, at any location, for repair work of defective electronic driver, surge protection device, pitted wiring from LED panel to driver, LED diode etc. and re-fixing the same on completion of repair work including testing and commissioning complete all as specified and directed. Note:- (i) M&L for electronic driver, surge protection device, pitted wiring, LED Diode shall be measured and paid separately under relevant items. However rate quoted shall deemed to include cost of minor spares like nut bolts, circle clips, clamps etc (if reqd) (ii) Repairs to LED panel is not included in scope of this item and the same shall be measured and paid separately. (iii) Necessary T&P like ladders etc required to take the fitting down shall be arranged by the contractor.

Supply & fixing electronic driver of make as per existing, suitable for 120 to 250W street light / flood light / post top lantern complete all as specified and directed.

All as per serial Item No. 12.00 above but suitable for 90 to 100 W street light / flood light / post top lantern

All as per serial Item No. 12.00 above but suitable for 60 to 80 W street light / flood light / post top lantern

Supply & fixing surge protection device of capacity 10 KV & make as per existing, suitable for street light / flood light / post top lantern complete all as specified and directed.

M&L for pitted wiring from LED panel to driver for capacity 120 to 250 W LED light fittings,complete all specified and directed by Engineer-in-Charge.

All as per serial Item No. 16.00 above but LED street light fitting of capacity 90 to 100 W

All as per serial Item No. 16.00 above but LED street light fitting of capacity 60 to 80 W

S&F, LED Diode suitable for LED street light fitting of capacity 80 to 250 W,complete all specified and directed by Engineer-in-Charge.

S&F, LED street light fitting of capacity 60 watt, IP-65 (minimum), integrated type with high efficiency electronic driver, SPD of capaciity 10 KV, pressure die cast aluminium housing with toughened glass cover, internally prewired and including electrically connecting, necessary clamps & taking down old unserviceable fitting complete all as specified and as directed. Make:- Bajaj / Crompton / Havells / HPL Note:- Supply of new GI Pipe bracket if required shall be measured and paid seperately under relevant item.

All as per serial Item No. 20.00 above but LED street light fitting of capacity 90 W

All as per serial Item No. 20.00 above but LED street light fitting of capacity 100 W

S&F, LED flood light fitting of capacity 100 watt, IP-65 (minimum) with luminous efficacy 100 Lumen/watt (minimum), SPD of capaciity 10 KV, pressure die cast aluminium housing, toughened glass cover, internally prewired and including electrically connecting necessary clamps & taking down old unserviceable flood light fittings from any position at a height exceeding 7.5 m complete all as specified and as directed. Make:- Bajaj / Crompton / Havells / HPL

All as per serial Item No. 23.00 above but LED flood light fitting of capacity 150 W

All as per serial Item No. 23.00 above but LED flood light fitting of capacity 200 W

All as per serial Item No. 23.00 above but LED flood light fitting of capacity 250 W

S&F 35/40 watt LED post top lantern with acrylic diffuser, pressure die cast aluminium housing, IP-65 (minimum), including electrically connecting and taking downold unserviceable fitting complete all as specified and directed. Make :- Bajaj / Crompton / Havells / HPL

S&F 1 x 9 / 10 watt LED bollard light fitting, UFO shape with minimum upward light component, IP-65, including hot dip galvanized pole, driver, all fixing arrangement etc. including electrically connecting and taking down old unserviceable fitting complete all as specified and directed. Make:- Bajaj / Crompton / Havells / HPL

S&F 1 x 9 / 10 watt LED bollard light fitting, inverted conical shape, opal acrylic diffuser, IP-65, including hot dip galvanized pole, driver, all fixing arrangement etc. including electrically connecting and taking down old unserviceable fitting complete all as specified and directed. Make:- Bajaj / Crompton / Havells / HPL

S&F 1 x 9 / 10 watt LED bollard light fitting, mushroom shape, IP-65, including hot dip galvanized pole, driver, all fixing arrangement etc. including electrically connecting & taking down old unserviceable fitting complete all as specified and directed. Make:- Bajaj / Crompton / Havells / HPL

S&F 12KW, three phase, automatic street light control panel with and including digital timer switch for automatic switching on / off street light as per set time through programmable 24 hour switch, 65A, TP power contactor, 63 A TPN MCB, wall / floor mountable, IP 54 (dust and vermin proof) enclosure made out of CRCA sheet duly powder coated, conforming to IS/IEC 60954-4-1, in-built- short circuit protection, locking arrangement with padlock and panel lock & taking down old unserviceable control panel complete all as specified and directed. Make:- Havells / GE / Kakatiya energy system Pvt Ltd / Indo Asian

M&L straight through joint, heat shrinkable type complete with jointing materials and accessories, suitable for 1.1 KV, 3.5 core XLPE aluminium conductor cable of size 50 Sqmm including taking down old joint complete all as specified and directed. Make:- 3M / Denson / Raychem

All as per Item No. 32.00 but cable of size of 3.5 core 16 to 25 Sqmm

S&F MCCB 3 pole 200 Amps breaking capacity 25 KA, Ics = 100% Icu including necessary modification in the panel & taking down existing MCCB complete all as specified and directed. Make :- L&T / Havells (Brand- HIM & HIX) / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipower)

All as per Sl item No. 34.00 above but 63 to 100 Amp

Taking down existing loop in loop out junction box, disconnecting the cable connections and refixing the same loop in loop out junction box with new cable connections including providing new set of aluminium lugs / thimbles of size 10 to 35 sqmm (as reqd) for 3.5/4 core existing LT cable of any type, necessary insulation with tape, clamps for fixing of cables, fittings and fixtures, nut bolts etc complete all as specified and directed.

Taking out existing XLPE Cable of any size in underground / alongwith pole or in any positon, removing materials to store for keeping in safe custody or for taking credit complete all as specified and as directed. Note:- Excavation and earthwork (if required) shall be measured and paid seperately.

Re-laying only old servicable (cable obtained from taking out old cable here-in-before after checking the fault) UG LT XLPE electric cable with alumimium conductor, 1100 volts grade of any size, laid in trenches / duct / on pole complete all as specified and directed.

Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 25 Sqmm x 4 Core, laid in trenches / duct / on pole complete all as specified and directed. Make :- Havells / KEI / Polycab / Gloster / Asian Cables / Finolex

All as per item No. 39.00 but cross sectional area 16 Sqmm x 4 Core

All as per item No. 39.00 but cross sectional area 50 Sqmm x 4 Core

M&L for disconnecting electrical connection of defective / burnt out UG LT cable of any size 2 to 4 core from main switch / DB / Junction boxe / LT Panels, excavating, taking out the required length of existing cable from loop, cutting the defective portion of cable old termination at end, providing new aluminium thimbles / lugs of suitable size and reconnecting the same with existing location and refilling of cable trench with existing sand and bricks Note :- The rate quoted shall include for necessary earth work

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling old unserviceable earthing complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

S&F in repair steel tubular swaged poles conforming to IS-2713, complete with cast iron base plate, finial taper plug, bolts, nuts & screws, type 410 SP-31 (9 m long) and including painting with two coat of aluminium paint over a coat of primer on exposed surfaces and black bituminous paint on steel surface embeded in concrete and 03 Nos band / strips with white synthetic enamel paint, 30 cm wide each at a distance of 30 cm from top of plinth block and numbering of poles complete all as specified and directed. Note:- Excavation, earth work and PCC work will be measured and paid for separately under respective items. Make of Pole:- Calcutta Poles & Tubes / Skipper Limited / Jindal Steel / National tubing Co / Bombay tube & Store Make of paint :- Jotun India Pvt Ltd / Asian Paints / Berger / Jenson & Nicholson Paints Ltd / Shalimar Paints Ltd

S&F in repair PVC insulated 3 core multistranded sheathed cable with 1.5 Sqmm copper conductor for connection of street / security light etc, complete all as specified and directed. Make:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL

S&F in repair weather proof cable junction box of size not less than 250 mm x 200 mm x 100 mm with terminals, IP 66 (minimum), suitable for outdoor installation, suitable for 10 to 25 sqmm cable, including 01 No 5/6 Amp MCB, 50 Amp rated 3 pole connector, fixing arrangement with MS flat of size 25 x 3 mm with necessary nuts, bolt and washers complete all as specified and directed. Make :- Hensel / Sintex Industries Ltd. / C&S electric Ltd. / National

S&F in repair bracket suitable for street light made out of GI pipe light grade of 40 mm bore & 1.5mtr length (minimum), bend to shape including 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers etc, & painting the bracket with two coat of aluminium paint over a coat of red oxide primer complete all as specified and directed. Make of Pipe :- Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd

M&L preparation of old painted surface of existing 9 m long old steel poles with connected cross arms, cable protection pipes, clamps, street light brackets etc, and including applying one coat of aluminium paint on complete height of the pole and applying one coat of synthetic enamel paint upto 0.80 m height from the top of coping with multi colour strips as per the colour code, writing pole details & applying one coat of white wash on pole coping complete all as specified and directed. Make of paint :- Jotun India Pvt Ltd / Asian Paints / Berger / Jenson & Nicholson Paints Ltd / Shalimar Paints Ltd

S&F 2 inches wide reflective tape with high-performance adhesion, water resistant including fixing around the circumference of pole at an approximate height of two meters complete all as specified and directed. Note:- Unit rate quoted shall deemed to include cost for arrangment of all T&P such as ladder etc. reuired.

S&F cubical type LT panel board, outdoor type, factory made from CPRI approved factory, made out of 3.15 mm thick CRCA steel sheet and including MS angle iron 50 x 50 x 6 mm frame work, legs 0.6 m long, MC 100 channel base, totally enclosed, dust & vermin proof using neoprene rubber gasket (IP-54), double leaf door shutter in front side and single leaf shutter in rear side fixed with hinges having necessary locking arrangement in both front and rear door, with four side projected slanting roof, provided with louvers for ventilation / heat dissipation, duly powder coated of approved shade over a coat of red oxide primer both internally and externally and including mounting on PCC platform made out of PCC 1:3:6, 150 mm thick (100 mm below & 50 mm above GL) all round the panel board and including necessary earth work.

S&F cubical type LT panel board, outdoor type, factory made from CPRI approved factory, made out of 3.15 mm thick CRCA steel sheet and including MS angle iron 50 x 50 x 6 mm frame work, legs 0.6 m long, MC 100 channel base, totally enclosed, dust & vermin proof using neoprene rubber gasket (IP-54), double leaf door shutter in front side and single leaf shutter in rear side fixed with hinges having necessary locking arrangement in both front and rear door, with four side projected slanting roof, provided with louvers for ventilation / heat dissipation, duly powder coated of approved shade over a coat of red oxide primer both internally and externally and including mounting on PCC platform made out of PCC 1:3:6, 150 mm thick (100 mm below & 50 mm above GL) all round the panel board and including necessary earth work.

M/S CHANDRA ENGINEERS AND CONTRACTORS

jyothi constructions

LEO ENTERPRISES

R AND A ASSOCIATES ENGINEERS CONTRACTORS

SRIVALLI ENGINEERS

ESWARA ENGINEERING CONSTRUCTIONS

MSN ENGINEERING WORKS

SVG SUPPLIES

SRI SRK ENGINEERS