REPAIRING OF AWC

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed.

Removal of rubbish,earth etc. from the workingsite and disposal of the same beyond the compound, in conformity with the Municipal /Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Labour for Chipping of concrete surface before taking up Plastering work.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed ……….bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS 45............ In ground floor and foundation. [using concrete mixture] 1:2:4 proportation ] i) In ground floor and foundation.

Ordinary Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS 45............ In ground floor and foundation. [using concrete mixture] 1:1.5:3 proportation ] i) In ground floor and foundation.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (iI) Tor steel/Mild Steel I. OTHER THAN SHYAM/SRMB/ELEGANT i) In ground floor and foundation.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (a) 25 mm to 30 mm shuttering with staging in foundation. [Page-42,it-36].

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (f) 25 mm to 30 mm shuttering without staging in foundation. [Page-42,it-36].

Brick work with 1st class brick in cement mortar (1:6). In Foundation & Plinth

Brick work with 1st class brick in cement mortar (1:6). In Superstructure

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. i) In Ground Floor.

(Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. [Page-105,it-15].

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974. [Page-107,it-20].

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.[Page-104,it-13]

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (C) 20 mm thick plaster (1:6). i) Ground Floor. [Page-189,it-01].

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (i) 35 mm. thick. [Page-48,it-06].

Neat cement punning about 1.5mm thick in wall, dado, window, sills, floor, drain, etc. [Page-192,it-15].

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.. In Ground floor: (iii) Two coats. [Page-197,it-15].

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (a) Two Coat, i) Premium 100% Acrylic Emulsion.[Page-197,it-17b]

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On metal surface : With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white). [Page-200,It-02].

Supplying fitting approved type ventilator in position after cutting holes in walls setting in cement mortar mending damages to wall and plaster and two coats of paint of approved brand sand shade. Payment of mending two damages of wall & plaster and painting to be made separately. (b) R.C.C ventilator of 20 mm. thick (i) Upto 0.10 sq.m. area. [Page No-40,it-29]

Supplying fitting and fixing fan hook for celling with 1.00 Mtr long and 16 mm dia rod complete including mending damages. [Page No-40,it-30]

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. [Page-112,It-21A]

Supplying, fitting and fixing glass reinforced polyester translucent fiberglasssheet tomatchwithGCICorrugation asperIS:12866-1989inroof fittedandfixedwith10mm dia "J" or "L" hook, bolts and nuts, limpet and bitumen washersandputtywith150mmendlapandonecorrugation minimum side lap complete.

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968&IS: 1161-1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabricationwithnecessarymetalarcweldingconformingtoIS:816 1969&IS: 9595 using electrodes of approvedmake and brand conforming to IS:814-2004, haulage, hoisting and erection all complete. Therateincludes t

Display Board

Drinking Water Purpose