Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAccepted-AOC | L1 | Accepted-AOC Valid lowest bidder | |
| 2 | Rejected-Technical DOOR NO 32 939C 1ST FLOOR CITY SCAPE BUILDING CHANGAMPUZHA NAGAR P O SOUTH KALAMASSERY ERNAKULAM KERALA 682033 | ERNAKULAM | KERALA | 682033 | - | Rejected-Technical No valid licence |
Tender Value
₹7.9 L
EMD Value
₹19,639
Closing Date
21 Oct 2022, 6:00 pmClosed
Executive Engineer
Executive Engineer PWD Electrical division Kozhikode.
Health and family welfare Department- Medical Education Service - Implementation of Plan Schemes during 2017- 18- Government Medical College, Kozhikode - Construction of New Examination Hall - Providing Fire Fighting System
2022_PWD_506439_2
PWD/BLDG/TR/3233/2022_14_1_1/1
Open Tender
Electrical Works
Item Rate
120 days
Kozhikode
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,735
₹19,639
14 Sept 2023
12 Oct 2022
25 Oct 2022
12 Oct 2022
21 Oct 2022
12 Oct 2022
12 Oct 2022 - 21 Oct 2022
Amount
OD113448/2022-2023:Supply ,installation ,testing and commissioning of electric driven terrace pump mounted on anti vibration pads consisting of following,complete in all respects as required. a) Horizontal type, centrifugal, End suction pump of CI body & bronze impeller with stainless steel shaft, mechanical seal at a flow of 450 lpm at 35 m Head conforming to IS 1520. b)Suitable HP Squirrel cage induction motor, TEFC type having synchronous speed of 1500 RPM & class- 'F' insulation suitable for operation on 415 V, 3 phase 50 Hz AC supply with IP55 protection for enclosureconforming to IS-325 c)MS fabricated common base plate ,coupling,coupling guard ,foundation bolts etc as required d)Suitable cement concrete foundation duly plastered .
90.17.7.7:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia
90.17.7.6:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia
90.17.11.5:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia
OD2245/2022-2023:NON RETURN VALVE -Providing and fixing horizontal type cast iron double flanged Non -return valve of approved quality conforming to IS:5312 with bolts, nuts, washers, 3mm thick insertion rubber gaskets complete. as reqd. Make: KARTHAR/INTERVALVE/ADVANCE 100 mm dia
90.17.20:Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
OD128976/2021-2022:Supply and providing pressure switch with IP 32 enclosure protection phosphor bronze bellows as sensing element etc complete
OD128977/2021-2022:Supply and providing pressure gauge in the existing system as required
90.17.9.1:Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal
OD128974/2021-2022:BRANCH PIPE - Providing and installation of Branch pipe of 63 mm dia having Stainless steel body with hexagonal head of 20mm dia nozzle conforming to IS903 with ISI mark Make: ARIHANT/NEWAGE
OD128975/2021-2022:HOSE CABINET - Supply, installation, testing and commissioning of weather proof hose cabinet having the size of 750 x 500 x 250 mm made of 16 gauge MS Sheet with PCC supports and full front front glass door and locking arrangements suitable to accommodate 2 nos 15 m long hose pipes and 1 No. branch pie. The cabinet shall be painted to scarlet red color outside and off white inside.
OD128973/2021-2022:FIRE HOSE - Providing and installation of 63 mm dia,15 Mtr long rubber lined woven jacketed hose pipe, type- A (Reinforced rubber lined) of IS-636-1988 complete with necessary instantaneous spring lock type coupling at the ends to match with landing valve / hose pipe / branch pipe with gunmetal /Stainless steel male & female couplings (IS:903:1993) ( For internal Hydrants & Yard Hydrants) Make: NEWAGE/CRC
90.17.17.1:Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. a. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 b. 20 mm nominal internal dia gun metal globe valve & nozzle. c. Drum and brackets for fixing the equipmets on wall. d. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m
OD128978/2021-2022:Supply and fixing fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as required for 2 way 63 mm dia MS pipe connection conforming to IS 904 as required.
17.1.9.2:Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.6 Zone
17.1.3:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of manual call boxes of MS Construction in surface/recess with stainless steel chain & hammer assembly Complete with glass and push button etc. as required.
17.1.6:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
17.5.2:CABLING & WIRINGSupplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
OD44988/2022-2023:supply and fixing 4kg ABC dry powder (stored pressure) type fire extinguisher, pressurized with dry nitrogen gas at 15bar,design,construction and testing as per IS 15683,external epoxy powder coating with Post office red shade, supplied with standard acessories.
OD128972/2021-2022:CO2 FIRE EXTINGUISHER - Supply and installation, testing and commissioning of CO2 type fire extinguisher with 4.5kg. Capacity complete with installation brackets with ISI mark IS:15222
OD45005/2022-2023:Supply and installation of Automatic 5Kg capacity Model No. MODCA Clean Agent HFC 236fa/HFC 227ea UL listed gas based ceiling mounted fire extinguisher . Temperature set at 68degree
17.1.11:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.
OD6583/2022-2023:supplying and installing in position self glowing "FIRE ASSEMBLY POINT" sign boards of size(150*300mm) made of luminescent safety, rigid sheet in green color, photo luminescent two foam sheet fixed on wall, samples has approved by the Architect before procuring.
OD45187/2022-2023:Supplying and installing in position of 6w,1ph,50Hz,indoor type LED sign boards of size(180*300mm) with battery backup --FIRE EXIT
OD45189/2022-2023:Supplying and installing in position of 6w,1ph,50Hz,indoor type LED sign boards of size(180*300mm) with battery backup --EXIT
OD45193/2022-2023:Supplying and installing in position of 6w,1ph,50Hz,indoor type LED sign boards of size(180*300mm) with battery backup --FIRE DUCT
OD45237/2022-2023:Supplying and installing in position self glowing sign boards of size(150*400mm)made of luminescent safely, rigid sheet in green color ,photo luminescent ACRYLIC sheet --FIRE EXIT
OD45241/2022-2023:Supplying and installing in position self glowing sign boards of size(150*400mm)made of luminescent safely, rigid sheet in green color ,photo luminescent ACRYLIC sheet- EXIT
OD45243/2022-2023:Supplying and installing in position self glowing sign boards of size(150*400mm)made of luminescent safely, rigid sheet in green color ,photo luminescent ACRYLIC sheet- FIRE DUCT
Allies Fire Systems Pvt Ltd
Bidder Name
Allies Fire Systems Pvt Ltd
RAYAN FIRE PROTECTION SYSTEMS
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .