REPAIRS TO ROAD FURNITURE AT AF STN BARODA

Amount

Dismantling cement Concrete of any description and in any position not otherwise specifically provided for kerb stone etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) on natural ground any section, including taking out embedded portion and making good disturbed ground complete all as speciifed and directed.

M&L for 2mm thick center line, stop line, dashes, arrows, brackets and similar work on bituminous/concrete pavement/path surfaces as per IRC pattern with thermoplastic approved quality of paint white/golden /yellow as approved colour/shade make with 8% glass beads laid at temp 160 with a special applicator machine complete all as per manufacturer's instruction and applied with machine, as per manufacturere's instructions incl preparation of surface complete all as specified and as directed. (Make : Shalimar of STP Ltd or M/s Kataline Infra Products Pvt Ltd or equivalent as approved by GE) Note : The rate included for provision of red signals to keep off traffic from wet paint, cleaning road surfaces and working during odd hours when traffic is light.

S&F in repair Raised Pavement Marker (Cats Eye, Road Stud) complying ASTM D4380 type "H" specification, made of high strength engineering aluminium Body having at least 13635 kgs load bearing capacity in accordance with ASTM D 4280. The reflectie raised pavement markers shall also confirm to the MORTH circular No RW/NH. 33023/10/97-DO.III and size or marker 9 cms x 10 cm x1.6cm having shape so that no water penetration or dust accumulation takes place on reflective surface, fitted with electronically welded tough polycarbonate micro prismatic reflective panels having not less than 13 sq.cms surface area of each side having long distacne visibility at night and in wet weather conditions. The slope or retro-reflectory surface shall be 35 + 5 degree to base. Each reflector shall have a CIL not less than vlaues speicified in table 1 of MORTH circular dated 11.6.97 respectively. The body of the marker having finger grip for easy and accurate placement and application with adhesive on Asphalt or Cement road.

S&F in repair Solar Powered road studs (Blinking LED type) having three ultra bright LED blinkers on each side with a reflective high intensityh panel. The road stud size 130mm x 130mm x 90mm highest from shank bottom to top and only body height 3.5cms having weight 700 grams. The fleshing rate 65 to 70 times per minute having automatic dusk & down operation, fitted with high efficiency crysteline silicon solar cells enclosed in robust all weather aluminium dia casted housing covered with water proof toughened glass water proof window for maximum exdposure of solar panel to sun light capableof withstanding temperature between - 35 % centigrade to + 35% centigrade complete all as specified and directed.

S&F in repair Dual directional Road side delineator 600 mm long made out of 16 gauge MS rectangular pipe of size 25x68mm stove enameled and baked at 120 degree C or powder coated. Head made out of ABS plastic rectangular mount with flat face provide with high intensity prismatic reflactorof colour(White/yellow/rRed) of size 100x125mm with additional two reflector strips of 25mm wide complete all as specified and directed by E-in-c Note : Delieneator shall be fiexed in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate.with size of block 300x300x350 mm deep. Cost of PCC excv and earth work is included in the unit rate of the item nothing extra shall be paid on this account Make : model DA-74 of dark eye or other make as approved by GE

S&F Speed breaker made from heavy duty tough rubber with high resistance wear and tear property best suitable height of 3'' for special correction UV stailized black and yellow compbination complete all as specified and directed

Excavating in post holes ( or similar holes ) each n.exc 0.5 cum getting out,returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface in hard/dence soil complete all as specified and directed.

S&F mild steel pipe (Fe-290, gde E-165) , beam section etc fixed with base plates, necessary nuts, bolts, plate etc as in posts complete all as specified and directed.

M&L for PCC 1:3:6 type C2 as in foundation, filling and mass concrete complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces all as complete all as specified and directed.

S&F in repair for installation of convex safety mirror of unbreakable lens of polycarbonate material of size 120 CM diameter complete all as specified and directed.

M&L for two coat of synthetic enamel paint on new concrete Surfaces of any description over 10cm girth or width, not otherwise described including one coat of primer complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old concrete Surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and directed.

S&F at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

S&F of flex board size 900X750 mm printed and fixed including box for fixing of link board with its complete fixing arrangement to ground incl 02 nos led lights fitting inside tha flex board and connect it from nearest power pointcomplete all as specified and directed.

Dagli Engineers