PROVIDING AND SUPPLYING MACHINERY AND MOTOR AT TWO PUMPING STATION-BAJPAAI GUTTER KUVA RAJPUR ROAD AND SEVALIYA ROAD ARTS COMMERS COLLAGE OPP. SIDE PUMPING STATION AT BALASINOR MUNICIPALITY. DIST, MAHISAGAR. UNDER: SWARNIM JAYNTI MUKHYA MANTRI SAHERI VIKAS YOJANA(YEAR: 2025-26) GRANT.

Quantity Description Rate Unit Amount

SUBMERSIBLE SEWAGE NON-CLOG VERTICAL PUPM: Supply,

installation, testing & commissioning of sewage submersible, non clog

type suitable for working on three phase, 50 Hz ± 3%, 415 V ± 10%, AC

supply, 1450 RPM synchronous speed with 3 core flat copper cable from

pump to starter panel with cable end terminations, all supports, clamps,

pipe fittings along with mechanical seal, bearing bush, strainer etc.

complete set & following M.O.C: Casing: CI, Impeller: SS CF8M, Wearing

ring & Bearing bush: Bronze, TC mechanical seal, CS / SS bearing, SS

shaft with sleeve, SS strainer & MS motor body.

SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor type,

minimum degree of protection - IP 52 as per IS: 2147, operation on 3-

Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with

instrumentation compartments accomodating LED type indicating lamps,

control contactors as per IS: 13947, CT of accuracy class- I as per IS:

2705, relays, meters & control MCBs, air insulated electrolitic grade

Aluminum bus bar for three phase & neutral system with incomming

breaker- microprocessor based Air Circuit Breakers (electrically operated

drawout type)/ air break fixed type MCCB with trip free mechanism,

current limiting type as per IS: 8828, Motor Contractor (as per type -2

coordination), Overload Relay with built-in single phasing prevention

feature & auxiliary feeders as per SLD drawings, momentary contact type

push buttons, equipment fittings, bus bars, cable boxes, cable gland,

incoming & ougoing cable connection for 1100V grade, Aluminium/

Copper conductor XLPE / PVC insulated & PVC sheathed armoured

cable, 10% spare terminals, power wiring using 1100V grade, FRLS

insulated copper conductor wires conforming to IS: 694 & 8130, cable

compartments / alleys of minimum 300 mm size, GI / Al earth bus bar for

entire length. MCC shall be fabricated from cold rolled, coled annealed

(CRCA) sheet steel & minimum thickness of various members shall be

as follows: Base Frame / Channel / Gland Plate: 3 mm, Load Bearing

Members / Doors: 2 mm and Internal Partitions: 1.6 mm.

Microprocessor based Soft Starter with external by pass contactor,

Semiconductor Fuses, Harmonic Filters, cast resin type CT, Digital MFM,

Analogue Ammeter & minimum 10 Channel Temperature Scanner with

RS 485 communication port.

SBD SECTION-7 BILL OF QUANTITIES-260

Supply, laying, testing & commissioning of 1.1 kV grade, XLPE insulated,

stranded Copper conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid

on wall surface with necessary clamps / in existing cable trench / cable

trays / conduit / pipe sleeves at road crossing or floor as per site

requirement) conforming to IS: 7098 (Part-1) & IEC: 60502 (Part-1) of

following sizes:

20.00 Mtr. 4 Core x 35 Sqmm 959.00 Mtr.

15.00 Mtr. 4 Core x 70 Sqmm 1866.00 Mtr.

20.00 Mtr. 4 Core x 50 Sqmm 1308.00 Mtr.

15.00 Mtr. 4 Core x 95 Sqmm 2679.00 Mtr.

Providing and supplying D.I. K-9 grade pipes for following nominal bore

diameter with internal cement mortar lining including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stroes, stacking etc. complete.

(IS 8329-2000). Rate for DI Pipe based on Wholesale Price index of Pig

Iron as 157.60 for the month of Dec-2022. For sewerrage project

cement mortar lining shall be with sulphate resistance cement.

DI PIPE K-9 D/F

73.44 Rmt. Ductile Iron DI Double Flanged D/F Spool Pipe 200mm dia 3898.00 Rmt.

18.36 Rmt. Ductile Iron DI Double Flanged D/F Spool Pipe 300mm dia 6546.00 Rmt.

Manufacture, supply & Delivery of Ductile Iron Flange socket spigot

bends, tee, reducers or any other specials as per BS-EN-545/1995 Class-

A series K12 suitable for use with D.I. Pipes,manufactured as per

IS:8329/1994 delivery of specials is to be made to GWSSB store or site

of works any where in Gujarat including all taxes, loading, unloading,

carting, stacking, insurance, inspection charges, octroi etc. complete.

4.00 Nos. 1) Ductile Iron DI Double Flanged D/F Reducer 6800.00 Nos.

4.00 Nos. 2) Ductile Iron DI Double Flanged D/F Tee 16500.00 Nos.

Providing and supplying ISI mark G.I. Pipes with Couplings of following

class and diameter including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS-1239) Not for well/Tube

well column pipe)

G.I. PIPE B-CLASS-Heavy Duty

120.00 Rmt. 50mm Dia 435.00 Rmt.

Purchasing & supplying at site of works, with Railway freight, loading,

unloading. Carting, etc. complete such as joints, channels, angles, iron

rails, etc.( M.S. Flat)- do- M.S. Flats of various Thickness

126.90 Kgs. M.S. Flat- 30 x 6 mm 66.408 Kgs.

Supplying and deliverying Rubber Sheet 2 x 1 Meter, 5mm to 10mm

Thick, IS 638 Grade, black colour, smooth surface, suitable for all taxes

loading, unloading, stacking etc.,complete.

4.00 Each. Rubber Sheet- 2 x 1 MTR 1800.00 Each.

SBD SECTION-7 BILL OF QUANTITIES-261

Supplying and Fixing M.S. Nut and Bolt, 3'' long x 5/8'', conforming to IS

1364, including washers, complete as per directed.

380.00 No. Nut and Bolt- 3'' x 5/8'' 35.00 No.

Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846

(Latest Edition) of following class and diameter including all taxes,

insurance, tranportaion, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc.

4.00 No. 200mm dia sluice valves 10902.00 No.

PN-1 with hand/wheel cap operated (Alt-1 type long body)

Providing and supplying ISI mark CI D/F Reflux Valves as per IS:5312

(Latest Edition) of following class and diameter including all taxes,

insurance, tranportaion, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc.

4.00 No. 200mm dia IS:5312 PN 1.6, Non Return Swing Check Valve 16571.00 No.

Guide Pipe Installation Charges including Welding Cutting & realated

4.00 Per Job. accessory. 24000.00 Per Job.

RCC works Pedestal Auto coupling removing & reinstalled labour charge

4.00 Per Job. Including Auto coupling Grouting Bolts Foundation Bolt. 8500.00 Per Job.

Labour Charges for repairing leakage CI/DI pipeline of following diameter

at different places including necessary excavation manually or by

machinery, removing of mud, dewatering, cleaning of pipe, cutting of pip,

jointing & repairing using CID joints including CID Joints, rubber ring, nut

bolts, hiring excavator, hydra/crane, dewatering machine, fule, operator

etc complete (including cost of jointing material but excluding cost of

Dual Gide Pedestal, Bracket (65HP nonoclog Motor Size 200mm) Jasco

75.00 Mtr. G.I. Chain 2 Ton (10mm) 980.00 Mtr.

2.00 No. Chain Block Manual with 10mtr Chain (3 Ton) 28000.00 No.

1.00 No. Chain Block Manual with 10mtr Chain (2 Ton) 21500.00 No.

Add :18% GST Charge

Add :- 1% Q.C. Charge

Add 2 % Contengency Charges.

SBD SECTION-7 BILL OF QUANTITIES-262

I / We am/are willing to carry out the work at _____________ % above / below (percent should be written in figure and in words) of the

estimated rates mentioned above. Amount of my/our tender works out as under.

( In words ) _________________________ percentage above / below the estimated rate.

Estimated Amount put to tender Rs.

Deduct _______ % below Rs. Rs.

Estimated Amount put to tender Rs.

Add _______ % above Rs. Rs.

Total Amount Rs.

Total Amount Rs.

*( Please strike out whichever is not applicable)

Note :1 All work shall be carried out as per Public Works Department Hand Book and other specifications of Division or as directed.

Note :2 Rates quoted include clearance of site (prior commencement of work and its close) in all respects and hold good for work under.

Note : 3 I/ We have read the conditions mentioned in this tender and agree to abide by the same.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design

the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in

all the tender.

Signature of Contractor Chief Officer

Balasinor Nagarpalika

SBD SECTION-7 BILL OF QUANTITIES-263