Renovation of Hockey Stadium Building under the work of Various Civil Electrical Water Supply Horticulture Hospitality jobs required for Hocke

B Total Amount i/c GST (DSR + Non-DSR):- 69,324,784

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

1 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including

dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated

soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

2.8.1 All kinds of soil Cum 671.00 302.22 202,788

2 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and Cum 224.00 267.55 59,932

watering, lead up to 50 m and lift upto 1.5 m.

3 1.1 By Mechanical Transport including loading,unloading and stacking

4 MR-1 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating

and dressing complete.

5 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate

20 mm nominal size derived from natural sources)

6 5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost

of centering, shuttering, finishing and reinforcement - All work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from natural sources)

7 5.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters,

buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts

etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and

reinforcement :

5.2.1 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from natural sources).

8 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate

40 mm nominal size derived from natural sources)

5.9 Centering and shuttering including strutting, propping etc. and removal of form for

9 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 183.00 324.45 59,374

10 5.9.3 Suspended floors, roofs, landings, balconies and access

11 5.9.4 Shelves (Cast in situ) Sqm 1.00 807.62 808

12 5.9.5 Lintels, beams, plinth beams, girders, bressumers and

13 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 8.00 847.33 6,779

14 5.22/5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete upto plinth level./ Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and binding all complete above plinth level

5.22.6/5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 6440.00 94.45 608,275

15 6.36 Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to IS: 4885 ) in

cement mortar 1:4 (1 cement : 4 Coarse sand) in foundation and plinth :

6.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand) Cum 42.00 6878.45 288,895

16 6.32 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure

above plinth level up to floor five level in :

6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cbm 129.00 8629.70 1,113,231

17 6.45 Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS

:12894, in super structure above plinth and upto floor V level.

18 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including

disposal of rubbish to the dumping ground within 50 metres lead.

19 13.4 12 mm cement plaster of mix :

20 13.6 20 mm cement plaster of mix :

21 13.16 6 mm cement plaster of mix :

22 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying :

a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound

@ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement Sqm 80.00 544.28 43,542

compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water

curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of

pipes and masonry with polymer mixed slurry.

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

23 26.6 Water proofing treatment of RCC sunshade with Zycosil/equivalent water proofing Solution (1

litre of Zycosil/equivalent & 20 litres of water stirred first & 2 litres of Zycoprime/equivalent

added and stirred (total 23 litres)) till it meets the saturation level and testing as per RILEM or by Sqm 1000.00 143.08 143,075

water drops test in which water drops do not absorb but drops remain or rolls.

24 MR-52 Providing & mixing chemical admixture such as "SIKA LATEX" or equivalent in cement concrete /

mortar and bonding work as per manufacturer's specification and as directed by Engineer- in - Ltr 100.00 504.66 50,466

25 MR-71 Cleaning the surface by chipping of lose materials etc. and provide two coat of Sika Topseal

107(Two pack acrylic cementitious water proofing coating system) with glass fiber on the surface Sqm 500.00 399.30 199,652

(3kg per sqm for two coats) or equivalent and as per direction of Engg-In-Charge.

26 14.91 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm

thick water proofing membrane, black finished reinforced with non-woven polyester matt

consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same

membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the

primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and

preparing the surface complete. The vital physical and chemical parameters of the membrane

shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/

5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of

membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with

ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of

the manufacturer of membrane :

27 17.35 Providing and fixing soil, waste and vent pipes :

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 RM 1386.00 1135.12 1,573,273

28 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or

without vent arm complete, including cost of cutting and making good the walls and floors :

17.60.1 100 mm inlet and 100 mm outlet

17.60.1.1 Sand cast iron S&S as per IS: 3989 Each 22.00 1690.03 37,181

29 17.38 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm

thick, bolts and nuts complete.

17.38.1.2 Sand cast iron S&S as per IS - 3989 Each 54.00 629.61 33,999

30 17.39 Providing and fixing plain bend of required degree.

17.39.1.2 Sand cast iron S&S as per IS - 3989 Each 54.00 463.31 25,019

31 17.43 Providing and fixing single equal plain junction of required degree with access door, insertion

rubber washer 3 mm thick, bolts and nuts complete.

17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 36.00 770.58 27,741

32 MR-65 To fill the peripheral gap between pipe and concrete/brick surface with free flow, ready to use,

Sika Rep Microcrete 4 of Sika or equivalent of Fosroc,Pidilite,BASF and sealing the mouth of

annual gap in 10 mm x 10 mm with moisture insensitive, two component, epoxy based Sikagard

694 FI of Sika or equivalent of Fosroc,Pidilite,BASF as gasket.

33 MR-64 Cutting of tree, wild growth etc and removing the roots including cutting of holes up to 1 sqm

size, striping of plaster, making good the same with cement concrete 1:2:4/brick work, Plastering, Each 20.00 1570.88 31,418

painting etc all complete as per direction of Engg-in-charge.

34 14.72 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven

story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes

joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase

system in the scaffolding for working platform etc. and maintaining it in a serviceable condition

for the required duration as approved and removing it there after .The scaffolding system shall

be stiffened with bracings, runners, connection with the building etc wherever required for

inspection of work at required locations with essential safety features for the workmen etc.

complete as per directions and approval of Engineer in-charge .The elevational area of the

scaffolding shall be measured for payment purpose .The payment will be made once irrespective

of duration of scaffolding. sqm 285.00 Note: - This item to be used for maintenance work

judicially, necessary deduction for scaffolding in the existing item to be done.

35 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping,

sand papering and preparing the surface smooth including necessary repairs to scratches etc. Sqm 6830.00 21.97 150,034

36 13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface

smooth including necessary repairs to scratches etc. complete

37 13.48A Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and

UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of

required shade (Company Depot Tinted) with silicon additives

13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of

exterior primer applied @ 0.90 litre/10 sqm.

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

38 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand

and manufacturer, over the plastered wall surface to prepare the surface even and smooth Sqm 775.00 130.48 101,126

39 13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall

13.43.1 Water thinnable cement primer Sqm 775.00 67.90 52,625

40 13.98 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even

13.98.1 One or more coats on old work Sqm 1775.00 95.72 169,898

41 13.50 Applying priming coat:

13.50.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard

42 13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound )

content less than 50 grams/ litre, of approved brand and manufacture, including applying

additional coats wherever required, to achieve even shade and colour.

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot

& cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

46 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast

Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually

controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete,

ncluding cutting and making good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

47 17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of

430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with

standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete,

including painting of fittings and brackets, cutting and making good the walls and floors wherever

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 30.00 5551.11 166,533

48 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets

and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making

good the walls wherever required :

17.10.2 Kitchen sink without drain board

49 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

18.21.2 45 cm length

50 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.2 Flexible pipe

51 15.7 Demolishing brick work manually/ by mechanical means including stacking of serviceable material

and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-

15.7.4 In cement mortar cbm 104.00 1789.44 186,102

52 15.1 Demolishing lime concrete manually/ by mechanical means and disposal of material within 50

metres lead as per direction of Engineerin- charge.

53 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material

within 50 metres lead as per direction of Engineer - in - charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 26.00 1306.01 33,956

54 15.18 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset

plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 KG 477.00 4.90 2,337

55 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and

disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Cum 5.00 3084.96 15,425

56 14.79 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply

line and removing from the terrace including shifting at ground level as per direction of Engineer- Each 18.00 376.70 6,781

57 MR-2 Demolishing granolithic flooring, cement flooring and DPC 25 mm thick by chisel without

disturbing the bottom concrete/ brick work including removal of debris upto 50.00 mtr as per Sqm 4577.00 52.68 241,110

direction of Engr In-Charge.

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

58 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,

including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer kg 830.00 117.95 97,896

59 MR-3 Fabricating and erecting structural steel like joist/ channel/ angle in trusses/ posts/ rafter/ purlins

in true to line and level including cutting required length. drilling holes and welding etc complete Kg 1250.00 40.04 50,045

as per the direction of the Engr-In-charge. (Excluding cost of structural steel).

60 14.75 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including

cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with

white cement based polymer modified self curing mortar, including disposal of rubbish, all

complete as per the direction of Engineer-In-Charge.

61 11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to

be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in

colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: Sqm 359.00 1204.02 432,244

4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with

white cement and matching pigments etc., complete.

62 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,

over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of

matching shade complete.

63 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge,

clips of required thickness, leveling system and rubber mallet for placing the tiles gently and

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

64 16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30

grade made by block making machine with strong vibratory compaction, of approved size, design

& shape, laid in required colour and pattern over and including 50mm thick compacted bed of Sqm 504.00 1001.95 504,981

coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-

65 16.90 Providing and laying tactile tile (for vision impaired persons as per standards) of size

300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of

approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi

modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in

all shapes & patterns including grouting the joints with white cement mixed with matching

pigments etc. complete as per direction of Engineer-in-Charge.

66 13.18 Neat cement punning. sqm 100.00 71.43 7,143

67 12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required

size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running

at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre

to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30

mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm

centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to

ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230

mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board

with recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all

as per manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding the

cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board

conforming to IS: 2095- (Part I) :2011 (Board with BIS Sqm 564.00 1207.34 680,940

certification marks)

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

68 MR-49 Lettering sign board/ display board/ border/ symbol etc. with single or multi colour fluorescent

sticker in any language ( hindi, odiya,english) on a prepared base /surface. the measurement will

be paid as per the length/width of sentence/symbol/border and height of stickers with complete

all lead & lift as per instruction of engr.-in-charge. where there will be difference of height of

letters in sentence, the height of small letter shall be considered for measurement.

69 8.32 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium

Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the

building , for all heights and all levels etc. including:

(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or

rain screen principle as required, proper drainage of water to make it watertight including

checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding

in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite

panel material consisting of 3mm thick FR grade mineral core sandwiched between two

Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be

coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of

approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified

using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with Sqm 36.00 4713.89 169,700

serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and

anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all

complete required to perform as per specification and drawing The item includes cost of all

material & labour component, the cost of all mock ups at site, cost of all samples of the individual

components for testing in an approved laboratory, field tests on the assembled working curtain

wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with

aluminium composite panel cladding till the handing over of the building for occupation. Base

frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall

provide curtain wall with aluminium composite panel cladding, having all the performance

characteristics all complete , as per the Architectural drawings, as per item description, as

specified, as per the approved shop drawings and as directed by the Engineer-in-Charge.

However, for the purpose of payment, only the actual area on the external face of the curtain

wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in

sqm. up to two decimal places.

70 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size,

on the top of the floor or the side of waist slab with suitable arrangement as per approval of

Engineer-in charge, (for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

71 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5

mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of

150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be

reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be RM 50.00 430.12 21,506

provided through out the frame. The door frame to be fixed to the wall using M.S. screws of

65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-

72 9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S.

tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top &

bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.

M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70

mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on

both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat

and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115

mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides

to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5

mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail,

paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the

styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and

joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm

width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc.

complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.

9.120.1 30 mm thick plain PVC door shutters Sqm 48.00 2586.62 124,158

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

73 26.87 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain

flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension

Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic

additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and

screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50

modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with

property of being termite/borer proof, water/moisture proof and fire retardant and fixing with

stainless steel butt hinges of required size with necessary full body threaded star headed counter

sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and

necessary S.S screws shall be paid separately)

74 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood

powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100

gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body

threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw

withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58

N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category

with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in

position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per

direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and

width of profile shall be acceptable. Variation in profile dimensions on plus side shall be

acceptable but no extra payment on this account shall be made.

75 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded

built up standard tubular sections/ appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM

rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and

jointed mechanically wherever required including cleat angle, Aluminium snap beading for

glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings

and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 450.00 491.28 221,076

76 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and

making provision for fixing of fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 400.00 595.06 238,023

77 21.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded

wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum

doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc.

complete as per architectural drawings and direc ons of engineer in-charge.

21.2.2 Pre-laminated particle board with decorative lamination on both sides sqm 100.00 1002.00 100,200

78 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc.

with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the

directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Sqm 100.00 1396.56 139,656

79 MR-18 Providing and fixing rimless single piece EW with UF soft color of make Jaquar (VGS-WHT-

81853S300UF) or equivalent , Colour White including fittings and fixtures complete in all respect Each 2.00 32417.34 64,835

and as per direction of Engr.- in- Charge.

80 MR-19 Providing and fixing rimless toilet roll holder with stainless steel of make Jaquar (AKP-CHR-

35753PS) or equivalent , Colour White including fittings and fixtures complete in all respect and Each 2.00 2141.91 4,284

as per direction of Engr.- in- Charge.

81 MR-20 Providing and fixing Hand shower (Health Faucet) with2m long tubes ( back flow preventor) of

make Jaquar (ALD-CHR-577) or equivalent range as approved and as directed by Engr. in Charge. Each 2.00 1823.73 3,647

82 MR-21 Providing and fixing Two way Bib Cock with wall flange , of make Jaquar (FLR-CHR-5041N) or

equivalent range all complete as approved and as directed by Engr. in Charge.

83 MR-22 Providing and fixing counter top wash basin mixer of make Jaquar KSU-WHT-35601) or

equivalent including fittings and fixtures complete in all respect and as per direction of Engr.- in- Each 2.00 8841.57 17,683

84 MR-23 Providing and fixing single level basin mixer with popup waste of make Jaquar (CHR-35051BPM)

or equivalent all complete as approved and as directed by Engr. in Charge.

85 MR-24 Providing and fixing click xlack waste half threaded with 80mm of make Jaquar(ALD-CHR-729) or

equivalent all complete as approved and as directed by Engr. in Charge.

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

86 MR-9 Providing and fixing Towel Rail 600mm long of make Jaquar(ACN-CHR-1111SM) or equivalent

range as approved and as directed by Engr. in Charge.

87 MR-25 Providing and fixing TOWEL RINGSQUARE Each 8.00 1506.61 12,053

88 MR-26 Providing and fixing TUMBLER HOLDER Each 2.00 832.32 1,665

89 MR-27 Providing and fixing MIRROR PLAIN/ MAGNIFYING PIVOTAL MIRROR Each 2.00 5687.18 11,374

90 MR-28 Providing and fixing ANGULAR STOP COCK WITH WALL FLANGE Each 8.00 1362.27 10,898

91 MR-29 Providing and fixing CONCEALED BODY FOR SINGLE LEVER HIGH FLOW Each 2.00 4048.88 8,098

92 MR-30 Providing and fixing SINGLE LEVER EXPOSED PARTS KIT OF HI-FLOW Each 2.00 2125.05 4,250

93 MR-31 Providing and fixing SHOWER ARM 400X25X25mm SQUARE SHAPE FOR Each 2.00 2528.57 5,057

94 MR-32 Providing and fixing MAZE OVERHEAD SHOWER 200X200mm SQUARE Each 2.00 5468.04 10,936

95 MR-33 Providing and fixing KUBIX PRIME BATH TUB SPOUT WITH BUTTON A Each 2.00 2731.91 5,464

96 MR-34 Providing and fixing FLEXIBLE TUBE 12mm DIA. & 1.5M LONG WITH Each 4.00 999.84 3,999

97 MR-35 Providing and fixing PREMIUM WALL BRACKET FOR HAND SHOWER ?3 Each 2.00 604.75 1,210

98 MR-36 Providing and fixing MAZE HAND SHOWER 65X95mm RECTANGULAR SHAPE Each 4.00 1967.02 7,868

99 MR-37 Providing and fixing ERICA DIGITAL STORAGE WATER HEATER Each 2.00 17782.18 35,564

100 MR-38 Providing and fixing 450mm BRAIDED HOSES FOR GEYSER Each 4.00 319.23 1,277

101 MR-39 Providing and fixing RITZ 3 PART ENC. G-G HNGS LFT. (2001-240 Each 2.00 76767.43 153,535

102 MR-40 Providing and fixing KUBIX 180X80X47 WHIRLPOOL AND AIRPOOL CO Each 2.00 162197.32 324,395

103 MR-41 Providing and fixing FRONT PANEL SUITABLE FOR KUBIX / ALIVE / Each 2.00 11217.38 22,435

104 MR-42 Providing and fixing SIDE PANEL SUITABLE FOR KUBIX / ALIVE / Each 2.00 6200.27 12,401

105 MR-43 Providing and fixing SINGLE LEVER WALL MIXER WITH PROVISION OF Each 2.00 12002.29 24,005

106 MR-44 Providing and fixing SLIDING RAIL 700X30X10mm FLAT SHAPE WITH Each 2.00 5599.73 11,199

107 MR-45 Providing and fixing URINAL WITH FIXING ACCESSORIES SET SIZE Each 2.00 13341.38 26,683

108 MR-46 Providing and fixing SENSOTRONIC F/V FOR URINAL WTH INSTL BOX Each 2.00 10043.70 20,087

109 MR-47 Providing and fixing PARTITION GLASS (ST.) FOR URINALS 450X90 Each 2.00 6641.71 13,283

Total Amount (Civil) (A):- 20,928,946 2,019,585

Total Amount (Civil) (A):- 20,928,946 2,019,585

DSR 2022 ELECTRICAL

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required

Supply and fixing of 240/415V, AC Make: Standard Electricals Limited/ Indo-Asian/ L&T/Havels

/schneide. ‘C’ Series/ Curve single pole with Neutral 40A.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker

3 2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required

2.10.2 Single pole and neutral Each 210 631.09 132,529

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

Supply and laying of 25 mm(1") dia.of thickness 1.5mm tough PVC pipe with ISI marked (make:

Berlia Electricals Polymers/Poly Cab/ Prestige Plastics or any other make approved by the

6 MR Deptt.) concealed on wall/ ceiling/structure with proper saddling 14 SWG Al.ECC and other Mtr 22000 116.95 2,572,821

accessories such as PVC RJ, Bend and Round Sheet on wall/ceiling surface with necessory

connections etc.complete as required including masonry work to its original.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with

suitable size of phenolic laminated sheet cover in front including painting etc. as required.

Supply & fixing of bakelite switch board cover of thickness 2 mm for fixing switch,socket

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

modular switches in recess etc. as required.

Supply & fixing of 1x16w/20W , LED T/L Fitting (Philips/Bajaj/GE/CG/ C&S/MESCAB/Lighting

Technology) with mounting channel,bi-pin holder & tube on existing wooden board/round block

with necessary connections.

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

Supply & Fixing of bakelite angle holder/pendent holder/batten holder on the existing wooden

11 MR board/round block/bakelite sheet with all connection complete as required. (ANCHOR make Each 60 44.25 2,655

holders are to be used)

Supply and fixing of 15watt, 200-240volts, B-22 cap Type:BC/ES (pin/screw type), colour: cool

12 MR day light LED (Make: Philips/Bajaj/Havels/CG/GE) on existing holder as directed by engineer Each 65 746.98 48,554

in-charge and as per site requirement.

Supply & fixing of down rod for ceiling fan upto 3 feet whereever required as per direction of

Executive-in-charge

Supply & fixing of flexible Twin Cu.wire 16/020 mm size for buzzer/calling bell/tube light/fan

etc.connection.

Supply & fixing of backelite ceiling rose on existing wooden round block/ wooden board/bakelite

sheet including all connection complete as required.

Supply & fixing of 3 pin plug top 6 Amp,with all necessary connection complete as reqd of

ANCHOR/CONA/HAVELS make.

Supply & fixing of 3 pin plug top 16 Amp,with all necessary connection complete as reqd of

ANCHOR/CONA/HAVELS. make.

Supply & laying of 19 mm (3/4") dia.of thickness 1.5mm tough PVC pipe with ISI marked (make:

Berlia Electricals Polymers/Poly Cab/ Prestige Plastics & any other make approved by the

18 MR Deptt.) with proper saddling and other accessories such as RJ, Round Sheet and PVC Bend on Mtr 2000 85.34 170,679

wall/ceiling surface with necessory connections etc.complete as required including masonry work

to its original.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode,

including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing

shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supply and fixing/laying of 50mm size PVC casing & caping, and other

accessories in wall/ceiling surface complete as per site requirement

Dismantling of the existing damaged battens separating the wiring with ECC and rewiring with

new superior quality PVC CASHING and CAPING with proper fixing on the ceiling/wall /structural

surface with necessary connection etc.complete as required. PVC CASHING and CAPING to be

supplied by party 1" size PVC cashing and caping

Supply & fixing of surface Mounting cool white/warm white LED fitting

(Philips/Bajaj/GE/CG/C&S/MESCAB/Lighting Technology) of 18w with suppy voltage 100V - 265

22 MR V,50HZ, Pre-treated CRCA frame in Powder coated white finish,LED Efficacy: >90 lm/W Each 300 4056.25 1,216,875

,Weather protection: IP 20

Supply & fixing of cool white LED heavy duty flood light fitting of power 50 Watt

23 MR (Philips/Bajaj/GE/CG/C&S/MESCAB/Lighting Technology)with supply voltage AC 100V to Each 40 2390.55 95,622

265V, 50Hz, PF>0.9.hermetically sealed providing IP65.LED Efficiency >90Lm/W.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 A socket outlet Each 210 128.54 26,993

1.24.5 6 pin 15/16 A socket outlet Each 75 207.55 15,567

1.24.6 Telephone socket outlet Each 10 155.93 1,559

1.24.7 TV antenna socket outlet Each 10 147.50 1,475

SUPPLY AND FIXING OF COOL WHITE LED HEAVY DUTY FLOOD LIGHT FITTING OF POWER

100 WATT (PHILIPS/BAJAJ/GE/CG/C AND S/MESCAB/LIGHTING TECHNOLOGY) WITH SUPPLY

25 MR VOLTAGE AC 160V TO 270V, 50HZ, PF>0.95, HERMETICALLY SEALED PROVIDING IP66, LED Each 40 4243.79 169,751

EFFICIENCY >90LM/W, THE JOB SHALL BE DONE AS PER THE DIRECTION OF ENGINEER-IN-

CHARGE & AS DETAILED IN TECHNICAL SPECIFICATION.

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

27 MR Supply and fixing of PVC make MCB enclosure(a) single pole EACH 15 120.11 1,802

28 MR Supply and fixing of PVC make MCB enclosure(b) double pole EACH 20 147.50 2,950

29 MR Supply and fixing of PVC make MCB enclosure( c) triple pole EACH 15 210.71 3,161

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I.

fittings including trenching (75 cm deep)and re-filling etc as required

SUPPLY & FIXING OF 50MMX6MM MS DOUBLE CLAMP SET FORFIXING THE GI PIPE ALONG RCC

POST/TUBLER POST WITH 12MM DIA GI BOLT & NUT AS PERREQUIRE.

Supply & fixing of Recessed Mounting cool white/warm white LED fitting

philips/Bajaj/GE/CG/C&S/MESCAB/Lighting Technology) of 5w with suppy voltage 100V - 265

32 MR V,50HZ, Pre-treated CRCA frame in Powder coated white finish,LED Efficacy: >90 lm/W, Weather Each 120 538.38 64,605

protection: IP 20

Supply & fixing of Recessed Mounting cool white/warm white LED fitting

(Philips/Bajaj/GE/CG/C&S/MESCAB/Lighting Technology) of 11w with suppy voltage 100V - 265

V,50HZ, Pre-treated CRCA frame in Powder coated white finish,LED Efficacy: >90 lm/W

,Weather protection: IP 20

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

Supply & fixing of Recessed Mounting cool white/warm white LED fitting

(Philips/Bajaj/GE/CG/C&S/MESCAB/Lighting Technology) of 18w with suppy voltage 100V - 265

V,50HZ, Pre-treated CRCA frame in Powder coated white finish,LED Efficacy: >90 lm/W

,Weather protection: IP 20

Supply & fixing of surface Mounting cool white/warm white LED fitting

(Philips/Bajaj/GE/CG/C&S/MESCAB/Lighting Technology) of 15w with suppy voltage 100V - 265

35 MR V,50HZ, Pre-treated CRCA frame in Powder coated white finish,LED Efficacy: >90 lm/W EACH 50 1024.07 51,204

,Weather protection: IP 20

Supply & fixing of surface Mounting cool white/warm white LED fitting

(Philips/Bajaj/GE/CG/C&S/MESCAB/Lighting Technology)of 5w with suppy voltage 100V - 265

V,50HZ, Pre-treated CRCA frame in Powder

coated white finish,LED Efficacy: >90 lm/W, Weather protection: IP 20

Installation of exhaust fan in the existing opening, including making good the damage,

connection, testing, commissioning etc. as required.

Supply & fixing of ceiling fan 48"sweep including all necessary connections for proper

38 MR functioning of fans.(make:usha/orient/khaitan) EACH 150 3407.25 511,088

Supplying and fixing two module stepped type electronic fan regulator on the existing modular

39 1.25 plate switch box including connections but excluding modular plate etc. as required. EACH 150 388.77 58,315

Supply & laying of 50 mm (2")dia.tough PVC pipe with thickness 1.5 mm (minimum)

(make: Berlia Electricals Polymers/Poly Cab/ Prestige Plastics & any other make approved by the

Deptt.), & other accessories in the existing trench or on wall/ceiling surface complete as per

site requirement

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual

41 2.15 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required

Supply of 240/415V, AC 50Hz Miniature Circuit Breaker Isolator, capacity & no. of poles as

42 MR mentioned or as per the direction of Engineer in-charge. Make: Standard Electricals Limited, Indo- Each 10 1896.43 18,964

Asian, L&T, Hagger, Siemens.(c)Four pole 100A.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,

240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

2.3.1 6 way , Double door Each 20 2324.18 46,484

2.3.2 8 way , Double door Each 25 2710.84 67,771

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker

45 2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required

2.10.4 Triple pole EACH 8 1060.95 8,488

2.10.5 Triple pole and neutral EACH 5 1293.79 6,469

46 MR Supply & fixing of 38 mm(1.5")dia tough PVC bend with ISI mark complete as reqd. EA 500 104.66 52,330

47 MR Supply & fixing of but 25 mm(1") dia tough PVC bend with ISI mark. EA 500 22.41 11,206

S/F of flexible PVC pipe including laying of cables of assorted size.a) 3/4'' dia PVC flexible pipe

49 MR S/F of flexible PVC pipe including laying of cables of assorted size.b) 1'' dia PVC flexible pipe Mtr 400 29.88 11,954

Dismantling & transportation to store of assorted size cable upto 16 sq.mm (SC/TC/3C) on or

PUNCHING OF THE ROAD SUITABLE FOR LAYING UP TO 4" DIAMETER PIPE.

"SUPPLY & FIXING OF 16" WALL MOUNTED FANS OF BAJAJ/KHAITAN/ORIENT MAKE, AS PER

DIRECTION OF EXECUTING OFFICER.COSUMABLES REQUIRED

TO COMPLETE THE JOB IN ALL RESPECT SHALL BE IN THE SCOPE OF THE PARTY. NECESSARY

CONNECTIONS AND WIRING SHALL BE DONE BY THE PARTY FOR PROPER FUNCTIONING OF THE

Supply & fixing of 4'' x 4'' size good quality PVC Box on the wall/ceiling surface including

dismantling of the damaged board, fixing the existing switches, sockets, cut-outs etc., with

proper connection complete as required. (masonary work to be done wherever required).

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

Dismantling of the existing damaged battens separating the wiring with ECC and rewiring with

new superior quality PVC CASHING and CAPING with proper fixing on the ceiling/wall /structural

surface with necessary connection etc.complete as required. PVC CASHING and CAPING to be

supplied by party. 1/2" size PVC cashing and caping

Removal of existing defective ceiling fan/cabin fan with or without regulator from the residential

Qrs/other premises and transportation & deposit at Elect. Maint. Stores

Supplying and fixing MOTOR STARTER-25A on the existing modular plate switch box including

56 MR connections but excluding modular plate etc. as each 30 821.18 24,635

required(make:C&S,ANCHOR,L&T,SIEMENS,HAVELS,ABB,SCHNEIDER)

Excavation of new cable trench of 1.5 feet deep & 1 feet width in all kinds of soil (including

cutting of cement concrete, pitch road, rail line crossing, wet soil, hard & rocky soil etc.) & back

57 MR filling to the reqd. extent. (wihout brick and sand) including supply & laying HDPE pipe, the HDPE Mtr 4500 653.74 2,941,835

pipe shall confirm to P-63 grade, dia 50mm, wall thickness more than 4mm with ISI mark as per

direction of Engineer-in-charge.

Supply and laying of cable 4 x 25mm2 al. The cable 1100v grade shall confirm to is:1554(part-1)

with standard aluminum conductor confirming to class-2 of is:8130/84. The cable shall be with

58 MR armour of galvanised round wire/flat steel strip. Cable shall confirm to the is indicated with its Mtr 700 895.24 626,670

latest amendment. Cable shall be with ISI certification mark. Cable shall be laid in existing trench

SUPPLY AND LAYING OF CABLE 3.5 X 95MM2 AL. THE CABLE 1100V GRADE SHALL CONFIRM TO

IS:1554(PART-1) WITH STANDARD ALUMINUM CONDUCTOR CONFIRMING TO CLASS-2 OF

IS:8130/84. THE CABLE SHALL BE WITH ARMOUR OF GALVANISED ROUND WIRE/FLAT STEEL

STRIP. CABLE SHALL CONFIRM TO THE IS INDICATED WITH ITS LATEST AMENDMENT. CABLE

SHALL BE WITH ISI CERTIFICATION MARK. CABLE SHALL BE LAID IN EXISTING TRENCH.

SUPPLY AND LAYING OF CABLE 3.5 X 70MM2 AL. THE CABLE 1100V GRADE SHALL CONFIRM TO

IS:1554(PART-1) WITH STANDARD ALUMINUM CONDUCTOR CONFIRMING TO CLASS-2 OF

IS:8130/84. THE CABLE SHALL BE WITH ARMOUR OF GALVANISED ROUND WIRE/FLAT STEEL

STRIP. CABLE SHALL CONFIRM TO THE IS INDICATED WITH ITS LATEST AMENDMENT. CABLE

SHALL BE WITH ISI CERTIFICATION MARK. CABLE SHALL BE LAID IN EXISTING TRENCH.

Excavation of NEW cable trench of 1000mm deep & 500mm width in all kinds of soil (including

cutting of cement concrete, pitch road, rail line crossing, wet soil, hard & rocky soil etc.), laying of

required quantity of side PCC slab (1:1.5:3) (1 cement: 1.5 sand: 3 graded stone aggregate 20 mm

nominal size) having size: 500mm(L) x 200mm(W) x 100mm(T) in the both side of cable and Top

RCC slab (1:1.5:3) (1 cement: 1.5 sand: 3 graded stone aggregate 20 mm nominal size) having

size: 500mm(L) x 300mm (W) x 50mm(T), sand etc. & back filling to the required extent as per

standard practice. All the materials required are to be arranged by the contractor.

Supply and laying of 1.1 kv, XLPE ,Armoured cable, voltage rated1.1kv,Aluminium

conductor,Material inner sheath& outer sheath should be FRLS PVC,Galvanised steel strip/round

wire3.5 corex185sqmm grade -H4 as per IS7098/88(PART-1) WITH stranded aluminium

conductor of class-2 of IS8130/84,COLOUR CODED cores laid up with suitable fillers.ISI MARKING

to be provided on the cable outer sheath.. CABLE SHALL BE LAID IN EXISTING TRENCH

Supply &installation, Testing & commissioning of DC- Inverter 5 star 1.5 Tonne split AC including

63 MR all accessories connection as per site requirement. Company Make(-VOLTAS,CARRIER,HITACHI Each 12 95478.72 1,145,745

&MITSUBISHI ELECTRIC)

Supply &installation, Testing & commissioning of DC- Inverter 3Tonne Tower AC including all

64 MR accessories connection as per site requirement.Company Make(-VOLTAS,CARRIER,HITACHI Each 8 247736.65 1,981,893

&MITSUBISHI ELECTRIC)

Auto changeover panel 3 phase power system including 400amp starter with Design,

Manufacturing, Supply, Receiving, Unloading, Shifting, Installation, Testing & Commissioning of

cubicle type totally enclosed free standing type moisture, dust and vermin proof Floor

Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete

65 MR with following equipments, INCOMER- 400amp 4P contactor- 2 NO, AUX CONTACTOR Each 1 201715.60 201,716

2NO+2NC-3NO, ADD ON BLOCK 2 NO+2NC-2 NO, DELAY TIMER-2NO, R Y B INDICTOR -6 NOS,

DIGITAL VOLTMETER-1 NO,1 NO DIGITAL AMMETER-1 NO, 200/5A CT-3 NO , 200A 4P 36KA

MCCB-2 NO, 100A CUTOUT-6NOS, SWITCHGEAR MAKE-L&T, including all connection as per site

requirement. PANEL SIZE-1000X1200X350MM

Supply, installation,Testing & commissioning with civil foundation of 3050mm long aesthetically

designed decorative light pole with cast Aluminium base suitable for mounting decorative post

top light of 50 watt.Colour of the pole will be black with golden embellishment of casting part

and finished with polyurethane paint. The pole shall have base plate 230x12mm thick with

provision for foundation bolt fittings. pole is compatiable for 70 mm size for cable entry &exist.

Junction box service door is made up cast aluminium and the control gear tray prewired with 2.5

sq mm cable upto light fitting.Simens make 6A SP MCB and 4 pole terminal connector for loop-in

loo-out arrangement with all materials & labour as required as per the direction of Engineer-In -

charge.(Make:K-lite pole KP-4189+ post Top KL-4518 A9/Wipro/CG/PHILIPS).

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

Supply & Erection of 7 mtr Galvanized Octagonal single Arm pole as per dimension: Top Dia-70

mm,Bottom Dia-135mm, section-1 (section length-8000mm) Thickness-3mm. Base plate-

67 MR 220x220x16mm. Pole shall include all accessories as Foundation Bolts, junction Box, MCB Each 35 35412.64 1,239,443

connector, connecting cable from JB to lighting fixture, Earthing cable to Fixture,MCB channel.

Supply & Erection of 7 mtr Galvanized Octagonal Double Arm pole as per dimension: Top Dia-70

mm,Bottom Dia-135mm, section-1 (section length-8000mm) Thickness-3mm. Base plate-

68 MR 220x220x16mm. Pole shall include all accessories as Foundation Bolts, junction Box, MCB Each 25 37653.59 941,340

connector, connecting cable from JB to lighting fixture, Earthing cable to Fixture,MCB channel.

SUPPLY AND FIXING OF 120 W LED STREET LIGHTFITTING.LUMINARIES TYPE :- LED, POWER

RATED:- 120W,VOLTAGE RATED :- 240V AC 50HZ,FOR STREET LIGHT FITTINGS HAVING PRESSURE

DIE-CAST ALUMINUM HOUSING & FRAME, MANUFACTURE WORD MARK/NAME

69 MR ENGRAVED/EMBOSSING ON THE DIE-CAST HOUSING, HEAT RESISTANT TOUGHENED GLASS/POLY Each 70 14813.21 1,036,925

CARBONATE COVER WITHIP66PROTECTION AS DETAILED IN TECHNICAL SPECIFICATION AS PER

DIRECTION OF ENGINEER-IN-CHARGE.

DESIGN, ENGINEERING, MANUFACTURE, TRANSPORT, SUPPLY, ERECTION, COMMISSIONING &

TESTING OF COMPLETE HIGH MAST LIGHTING SYSTEM OF HEIGHT 12METER complete with

accessories. The HMT shall consists of 12 Mtr single section polygonal cross section and

continuously tapered tower suitable for wind loading as per IS:857 part-31987.One 2-tier lantern

70 MR carraige suitable for holding 12 NOs 200 watt LED flood light fittings,Pully Head Assembly, Winch each 4 313779.91 1,255,120

Drum with motor,stainless steel Rope sets,Trailing cable,Feeder pillar box for operating the

HMT,Foundation bolts &template etc,Aviation lamp,cable & cable connections,lighting final,tools

& tackles.The job shall be done as per the direction of Engineer-in- charge.

DESIGN, ENGINEERING AND CONSTRUCTION OF SHALLOW RCC FOUNDATION FOR 12MTR HIGH

MAST SYSTEM WITH M25 GRADE CONCRETE CONSIDERING THE SAFE SOIL BEARING CAPACITY AT

SITE AS 10T/SQM AT 2.0MTR OR MORE DEPTH AND WIND SPEED OF 55MTR PER SEC. ALONG

71 MR WITH RAISED CONCRETE PLATFORM OF MIN. 0.75MTR FROM FGL ETC, TRANSPORT, SUPPLY OF each 4 59768.05 239,072

ALL MATERIAL, LABOUR, TOOL & TACKLES ALL COMPLETE AS PER DIRECTION OF ENGINEER IN-

Supply and Erection Feedar pillar Box for operating the Highmast complete with accessories.The

Feeder pillar box shall contains with,4 pole 63A MCB-1 no, 40A AB power contactor:1 no, Time

switch:1 no,Puss Buttons:2 no, 18A AB contactor for Motor Operation:2 nos & suitable

Terminals blocks etc.

SUPPLY, FIXING AND TESTING OF COOL WHITE LED HEAVY DUTY FLOOD LIGHT FITTING OF

POWER 200 WATT (MAKE: PHILIPS/BAJAJ/ CROMPTON GREAVES /C&S) WITH SUPPLY VOLTAGE

AC 160V TO 270V, 50HZ, PF>0.95, HERMETICALLY SEALED PROVIDING IP66, LED EFFICIENCY

>100LM/W, THE JOB SHALL BE DONE AS PER THE DIRECTION OF ENGINEER-IN-CHARGE & AS

DETAILED IN TECHNICAL SPECIFICATION.

Construction of earth pit as per IS: 3043-1987.,600mm x 600mm x 6mm GI plate. The earth pit

dimension of 1m(L)x0.6m(W)x3m(D ) shall have standard depth of 3.0 mtr. Homogeneous

mixture of BENTONITE power & soil in the ratio 1: 6 is to be used for filling of the earth pit.

Minimum 100kg. Of BENTONITE power to be used. It has 2.5 mtr, 40 mm dia heavy guage (

4.20kg / mtr.) GI pipe (perforated) as electrode connected and welded to GI plate at bottom. Top

of the electrode should have GI flange & funnel (having GI wire mesh) welded to the

electrode. GI strip of 25mm x 3mm of length 3mtr to be provided, one end of the GI strip shall be

welded with GI flange should have 4 nos holes of dia 19 mm for connection of GI strip. The party

shall supply all the materials required to complete the earth pit including GI strip of size 25mm x

3mm upto 3 mtrs with 8 SWG GI wire wherever required connection up to earthing bus and

precast RCC earth chamber of size 45cm x 45cm x 45cm with thickness of 7.5 cm

complete as required.

Supply and fixing of 200A ICTPN main switch unit with 200A HRC fuse on MS frame grouted on

the wall surface or on the existing panel board including all incoming and outgoing cable

connection with necessary socketing arrangement and cable entry box wherever

necessary,complete as reqd. Make:Helcon/Elcon/Indo Asian/ Standard

BILL OF QUANTITY

“Renovation of Hockey Stadium Building, under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel

Township at Rourkela (Odisha)".

ITEM DESCRIPTION AMOUNT

SL No DSR/MR Unit Qty RATE

Supply and fixing of fabricated feeder pillar ofsize 850mm(h) x 500mm(l) x 400mm (w) made out

of 2mm thick ms sheet with front opening two doors (for housing cable and termination kit kat

fuse/catridge fuse base of size- 0 & size-1, neutral bus and 2 nos. stud bolts for earth

connection) fabricated on ms angle structure/frame of size 850mm + 300mm (h) x 500mm (l) x

400mm (w) made out of 50x50x6mm MS angle(300mm exetended for legs). The feeder pillar

should have 1no 70 to 250A TP contactor including 24 hours time clock, 1no 200 Amps. HPL/

HAVELS/ INDO ASIAN/ C AND S/ make ICTPN switch fuse unit with 200 Amp HRC fuse, 1no Four

pole 63A 240/415V, AC 50Hz Miniature Circuit Breaker, 1no Four pole 40A 240/415V, AC 50Hz

76 MR Miniature Circuit Breaker, 3nos of ‘C’ Series/ Curve Double pole 6A to 32A 240/415V, AC 50Hz each 3 341351.88 1,024,056

Miniature Circuit Breaker of breaking capacity 10KA, including required wiring with 1X6mm2 and

1x10 mm2 Cu. multistrand cable as required etc. The feeder pillar should have dust and water

ingress protection conforming to ip:54. the feeder pillar should be duly spray painted on both

inner and outer side with one coat of red oxide primer & 2 coats of alminium paint. feeder pillar

to be fixed at site with concreting 4 nos of exetended legs. fitting & fixtures required for

feeder pillar against for feeder piller are as follows. (drawing to be collected if required )

TOTAL AMOUNT (Electrical) (B):- 15,580,556 30,795,697

TOTAL AMOUNT (Electrical) (B):- 15,580,556 30,795,697