Repair to flooring plastering tiling and misc works at Ramgarh under GE Army Jaisalmer

Amount

Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed.

Demolition of brick work or stone/ boulder masonery built in cement mortar including all quoins arches, pillers etc but excluding ashlar facings, dressed stone work and precast concrete articles and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling or terrazo finish and hacking out joints hacking for key scrubbing down with water etc complete

M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in solid block masonry exceeding 10cm width and setting in cement mortar 1:6 all as specified & directed.

M & L rendering 10mm thick mixed with integral water proofing compound on surface of stone masonry or surface other than fair face of brickwork in CM 1:4 and all as specified

Supply only integral water proofing compound all as specified & directed by Engineer-in-charge.

M&L Glazed Coloured ceramic jointless tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm/450 x 300x 7mm thickset and jointed in neat cement slurry and pointedin white or colour cement to match (Note: Colour shall be as approved by Engineer-in-Charge)

M&L for hardcore of gauge n.exc. 63 mm brocken stone, deposited, spread and levelled in layers n.exc.15cm thick.

M&L for 75mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hardstanding.

M& L for PCC 50mm thk type C1 1:3:6 (20mm graded stone aggregate laid in alternative as in plinth protection & draine as including finished the surface even and fair without using extra cement and filling the joints with mastic filling ie one part of bitumen 85/25 & 3 parts of sand by weight as specified and directed

Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S&F 3mm thick sheet glass ordinary quality n exc 0.5Sqm in each pane

Cement concrete in surface channels and drains Type C2 1:3:6 40mm graded aggregate

Extra for forming fair finfished drain or channel 30 cm inner girth in cement concrte, using extra cement including forms, moulds, mi-tre/stopped end etc.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles).

M & L for Granite (of any type) tiles18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types

M & L for non skid ceramic coloured jointless tiles 7-8mm thick(square/rectangular) area of each tile not exceeding .11Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match

Screed bed or bedding layer of mortar 15 mm thick in 1:4 for laying floor finishes

S & F in repair vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest including P or S trap and concrete for necessary fixing complete

S & F in repair vitreous china squating pan pedestal pattern with seat cover complete

S & F in repair Bib tap long body cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia

S & F in repair Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia

S & F in repair Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed

S & F in repair Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia

S & F in repair PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets

S & F in repair vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection etc complete

S & F in repair 600 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete.

S & F in repair looking mirror 600x450mm with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as directed by Engr-in-Charge

S&F in repair Vitreous china urinal ,half stall type ,complete incl providing and fixing plugs bedding urinal against wall in CM1:4 securing urinal to plug with and incl 60mm long brass screws ,pointing around urinal back in cement ,incl grating union for discharge pipe etc.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board prelaminated both sides with decorative choice laminations, fixed with screws to alluminum frame work

Providing and fixing power coated aluminium (with minimum thicknesh of 50 micron power coating) work for partitions with extruded built up standard tubular sections/appropriate z sections and other sections of approved make confirming to IS :733 and IS : 1285, fixing with dash fasterners of required dia and size including necessary filling upthe gaps at junctions , i.e at to, bottom and sides with required EPDM rubber / reoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing

-Ditto- All as per ser No 19 but 20mm dia

S & F 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc

-Ditto- All as per ser No 35 but 20mm dia

Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap)

S & F for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I1000 ltr capacity, white having 3 layer coating

S & F in repair 20mm bore dia ball brass valves high pressure ,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and complete all as specified and as directed by Engr-in- Charge.

Taking down PVC (SWR) pipes 110mm/75mm dia

S & F 110mm bore PVC SWR pipe single socketed in any length with rubber ring joint laid in trenches or floor

S & F 75mm bore PVC SWR pipe single socketed in any length with rubber ring joint laid in floor

S & F 75mm bore PVC (SWR) bends with access door

S & F 110mm bore PVC (SWR) bends with access door

S & F vitreous china White glazed fine clay sink size 750x450x250mm including coupling and waste pipe

S & F in repair 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end

Cutting chases pinning in for concealed water tubing etc and making good cutting not exc 10cm in width or girth to brick stone wall or concrete surfaces

Preparation of old decorated existing surfaces and applying one coat of white wash on walls including in narrow width, bands, cornices, plasters etc complete all as specified and directed.

Preparation of old decorated surfaces and applying one coat of white wash on ceiling including in narrow width, bands, cornices, pilasters etc., complete all as specified and as directed

Preparation of old decorated surfaces and applying one coat of cement base paint (Camaflouge Pattern) on walls including complete all as specified and as directed

Preparation on new steel surfaces over Surfaces of any description, over 10cm in width or girth and applying 2 coat of synthetic enamel paint over a coat of red oxide Primer.

Preparation on Old steel surfaces over Surfaces of any description, over 10cm in width or girth and applying 2 coat of synthetic enamel paint over a coat of red oxide Primer.

M & L for preparing new /old plastered surfaces and applying two coats of oil bound distemper over one coat of primer wall putty including preparatory to distempering on surface of walls

M&L for applying 3mm wall care puty of walls

S & F in repair Soap dish, chromium plated

Cleaning of blocked in sewage line of 100 mm dia by rodding from one MH to next MH and washing through in fresh water including removing all sludge from the sewage line and man hole including removing existing MH cover and fefixing properly after cleaning and removing all sludge outside MD land

All all as per item No. 56 above but sewage line of 150 mm dia.

S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drwn steel spring, fixed in floor complete as directed by Engr-in-Charge.

Bees-wax polishing onsurfaces of any description, width or girth including cleaning and preparing the surface

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

M & L for Point wiring using colour coding as per IS with 2.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through and including heavy duty ISI marked PVC conduit alongwith its accessories of suitable size, with GI sunken boxes of 1.2 mm thick, 60 mm depth of suitable size including fixing/ grouting sunken as per site requirement and making good to match with existing finishes including provision of cover with white colour hylum sheet of 3.6 mm thickness switches/ sockets/ regulators etc including running up of stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S & F for Switch piano flush type single pole one way, and 15 amp complete ISI marked complete all as specified.

S&F for socket outlet 2 in 1, 2/3 pin 5 Amps and 15 Amps flush type complete all as specified.

S & F Retro LED T5 LED Tube light fitting of capacity 18 Watt complete all as specified and directed.Cat Pat No.LT5RT1-18-CDL

S & F for MCCB DB VTPN 4 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 230 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed .

S & F for MCB DB SPN 8 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 230 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed .

S & F for MCB DB SPN 4 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 230 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed .

S & F for MCCB four pole rated capacity 63 amps, 415 volts breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB SPN double pole rated capacity 63 amps, 230 volts breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB SPN double pole rated capacity 6 to 40 amps, 230 volts breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA complete all as specified and as directed.

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized iron strip 32 x 6mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed.

Supply and laying ,testing XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade for the following cross sectional area 10 Sqmm 2 core.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified & directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc not exceeding 10 sqm on plan and getting out in Soft/dis integrated rock complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in Soft/dis integrated rock all as specified & directed by Engineer-in-Charge.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engineer-in-charge.(Note :- For the purpose of payment only punned thickness will be measured).

Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 50 to 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete all as specified & directed by Engineer-in-charge.

M&L for cement concrete (1:4:8) type D2 using 40mm grade aggregate for foundation of pole struts.

M&L for cement concrete (1:3:6) type C1 using 20mm graded aggregate for coping of pole including form work and finishing the exposed surface even and smooth w/o using extra cement

M & L of Supply and fix Prestressed concrete poles of 9 meter long having 102 mm x 152 mm at top and 152 mm x 260 mm at bottom and long,102mm x 289 mm at top and 12 mm x 279 mm at bottom,class 10 complete all as specified

S & F of integral LED street light luminaire 45 W IP 65 comprising of epoxy powder coated housing, enclosed with glass cover in frame on MCPCB complete all as directed by Engineer-in-charge. (Make:- C&G/Havells/Philips

S & F of security light bracket with GI pipe medium grade of size 40mm dia bent to shape of length 1.2 meter including flat iron clamp made of FI 40 mm x 6 mm, nuts, bolts, washers etc(Two sets) duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S&F in repair, pole mounting box made out of PVC FR grade (Sintex) with bus bar-03 Nos for phase & 01 No for Neutral 32 Amps supported on insulators and one No. MCB 6 Amps, clamp made out of FI 25x4mm nuts, bolts and washers etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer on clamp complete all as specified & directed by Engineer-in-charge.

S&F in replacement Nature switch- 03 (DUAL OUTPUT) in enclosure made out of UV stablized, FR grade special moulding compound, rust proof, electric shock proof, vermine proof outdoor pole mountable with mounting bracket made out of FI and nut, bolts, washers including cable glands, openable door with lock comprising with power contactor, 3 phase, 25 Amps (2 Pole)-01No; 25 Amps Single pole -01 No., MCB SP 25 Amps SP-03 Nos for max load 8 KW complete.MAKE : Kakatiya Energy System Ltd, Cat No. SWADEEP-03 EC 8 KW 3 P Dual or quivalent make in Bajaj/Indo asian/Legrand.

Supply and fixing feeder pillar box out door type not less than 0.60 M X 0.60 M X 0.60 M made out of 3 mm thick CRCA sheet supported on angle iron frame 40X40X5 MM ,aluminium bus bar 03 Nos rated capacity 400 Amps for phase and 01 No rated capacity 200 Amps for neutral supported on porcelain insulator, including powder coated and PCC foundation complete following :- (i) MCCB 63 A 4 Pole 16 kA - 01 No (Incoming) (ii) MCCB 40 A 4 pole 16 kA - 02 (out going) (01 Spare) (iii) Digital Ammper meter - 01 No (iv) Digital voltmeter - 01 No (v) Indicating lamps RYB - 01 set

Material and Labour of aluminium strip 25 x 3.15 mm with porcelin insulator saddles and fixing screwes etc,for roof conductors and down conductors above ground complete all as specified and directed by Engineer-in-charge.

Material and Labour of Air terimination,single pointed,Aluminium rod 12 mm dia and 300 mm long complete all as specified and directed by Engineer-in-charge.

Material and Labour for test point teriminal block made of aluminium/gun metal or phosphorus bronze size 75 x 75 x 25mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex,head screwe complete all as specified and directed by Engineer-in-charge.

Material and Labour of galvanised iron strip 32 x 6 mm burried in ground with fixing nuts and bolts,brazing etc, complete all as specified and directed by Engineer-in-charge.

M/S SHRI HARI CONSTRUCTION COMPANY