Chungam- Pathway Development And Boat Landing By The Side Of Punnamada River

Amount

Appendix A- WALKWAY

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.64.1 : Coconut Pile - Supplying and stacking well matured straight coconut post for driving down throug various strata bellow bed level including cost coveyance labour charges etc complete.

60.64.4 : Coconut Pile - Driving down coconut pile to lines and levels through variuos strata including all hire charges and labour for fixing , staging platform and all other appliances necessary for pile driving down after pointing the bottom end

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Appendix B- BOAT LANDING

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

12.49 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).

13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od214966/2019_2020 : Supplying and fixing pre cast three seated RCC garden bench of safe area: length 1.5&lt;br&gt;m, width 0.45m and back rest 0.40m with all cost of labour conveyance etc. complete

od214970/2019_2020 : Supply and Plantation of Trees, Bamboos, Shrubs, and Hedge at site i/c watering and&lt;br&gt;removal of unserviceable materials as per direction of officer in charge including cost of plant &amp; watering&lt;br&gt;etc. complete.&lt;br&gt;Details cost of sapling and plantation for 100 nos ( Based on actual observation )

Appendix C- Pile and Slab Retaining Wall

od215432/2019_2020 : Pre-cast RCC piles 8.55m X .3m X .3m with pointed end in Cement Concrete 1:1.5:3 by using 20mm.nominal size broken stone including all cost of form work, watering, curing etc.complete excluding cost of reinforcement, casting at contractor&apos;s own yard near site of work etc. complete.

od215471/2019_2020 : Precast Reinforced Cement Concrete slabs required size in cement concrete 1:1.5:3 by using 20mm.nominal size broken stone including all cost of form work, watering, curing etc.complete by casting at contractor&apos;s own yard near the site of work etc. complete excluding the cost of reinforcement.

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

od215409/2019_2020 : Conveying precast R C C piles 300 mm square, 8.55m length from the place of casting to the site including hire charges of boats,coir ropes,crow bar etc. complete.&lt;br&gt;

od215644/2019_2020 : Lifting, handling , hoisting, aligning, fixing and Driving down R C C piles 300mm. square through various strata from the bed level till refusal of monkey weighing not less than 2 ton with the aid of pile driving plant winches, barge and accessories, wire rope etc.including labour,lubricant oil, pay of staff etc.complete.

od218146/2019_2020 : Chipping and removing the top of the R.C.C.piles to lines and levels carefully with out damaging the remaining portion and removing the debris up to distance of 150m stacking etc complete. specification as per 15.3 of DAR

od215783/2019_2020 : Conveying, lifting, handling, hoisting, aligning and setting in position, the precast R C C slab in between piles and finishing with neat cement on joints etc complete

od218367/2019_2020 : Protecting the filled earth from seepage through the joints of precast slabs using geofabric filter GWT - 26 - 130 as per the direction from the departmental officers at site including all cost of materials, labour, conveyance and all other incidential charges involved etc complete.

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

od227978/2019_2020 : Providing sign board in structural steel work in single section, with plate, including cutting, hoisting, fixing in position and applying a priming coat, two coats of synthetic enamel paint of approved quality and lettering etc all complete.

Appendix D- Solar Light

90.15.3.3 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 6 Meters

od224993/2019_2020 : SITC of Solar LED lighting System with following accessories. (a) All in one Solar LED CSADHMP40 CDL, 30W LED Crompton make / Equilant having 60W solar module Wp with 24 Ah battery having 5100 lumens having dimenssions(Approx) 955 X 630 X 55 (LWH) haing approximate weight of 19Kg suitable to fit on tubular pole.(3years warranty) including AMC for two years.

ELDHOSE K PAUL

Bidder Name

TBAS CONSTRUCTIONS

ELDHOSE K PAUL