REPAIR AND REWEAVING OF G I CHARPOY INCLUDING CONVERSION TO PLY TOP AND REPAIRS TO WOODEN FURNITURE AND POLISHING AT BINNAGURI STATION UNDER GE NORTH BINNAGURI

Amount

Removing of existing u/s nylon newar from charpoy , tightening the frame and Supply and fixing new plywood of 12mm thickness BWR, 9 No ply, ISI marked, conforming to IS: 303-1989 (size Approx 1950 mm x 900 mm) with 6mm dia 65mm long nut & bolts with washer (total 10 Nos) including drilling 03 Nos holes on each long rails and 02 Nos holes on short rails including 900 mm x 50 mm x 6 mm thickness mild steel flat iron 3 (three) Nos and applying black synthetic enamel paint (1 st quality) over a coat of red oxide zinc chrome primer complete all as specified and as directed. (Drawing No. FD-220)

Taking out broken unserviceable long rails from Charpoy GI pipe and Supply and fixing new long rails 1940 mm long duly threaded at both end out of GI tube 32mm dia medium grade all as spacified. (Drawing No. FD-220)

Taking out broken unserviceable short rails from Charpoy GI pipe and Supply and fixing new long short rails 900 mm long duly threaded at both end out of GI tube 32mm dia medium grade all as spacified. (Drawing No. FD-220)

Taking out broken unserviceable leg from Charpoy GI pipe and Supply and fixing new long short rails 600 mm long duly threaded at one end out of GI tube 32mm dia medium grade all as spacified. (Drawing No. FD-220)

Taking out unserviceable short rails from Charpoy GI pipe and making short rails for GI charpoy made out of from broken long rails obtained from Sl No.2 above including cutting & threading rails and fixing in replacement all as spacified and directed. (Drawing No. FD-220)

Taking out unserviceable legs from Charpoy GI pipe and making leg for GI charpoy made out of from broken short rails obtained from Sl No.3 above including cutting & threading rails and fixing in replacement all as spacified and directed. (Drawing No. FD-220)

Taking out unserviceable elbow and Supply and fixing new GI elbow 32mm dia, three way medium grade, ISI marked all as spacified and directed. (Drawing No. FD-220)

Taking out unserviceable check nut from long rails and Supply and Fixing new check nuts of 6mm wide, 32mm dia all as specified and as directed. (Drawing No. FD-220)

Taking out unserviceable mild steel clamp and Supply and Fixing new mild steel flat iron clamp of 25 mm x 3 mm thicness size as per existing shape with one washer fixed at bottom of clamp including applying black synthetic enamel paint (1 st quality) over a coat of red oxide zinc chrome primer complete all as specified and as directed. (Drawing No. FD-220)

Taking out unserviceable hard wood shoe from its position and supplky and fixed hard wood shoe round block made from 2nd class well seasond (Sal) and fixed with new screw complete all as specified and as directed. (Drawing No. FD-220)

Repairs to Bed Ply / Newar top for the following :- Removing old unserviceable fitting and fixture of Bed plywood top such as head board, foot Board, Long Rail, sttiffner, MS Clamp etc and supply and refixing with new items of 1 st Class hardwood well seasoned (Teak wood) and minor repair applying French Polish glossy finished to match with existing surface to wooden and applying synthetic enamel paint (1st quality) over a coat of red oxide primer zinc chrome complete all as specified and shown on drawing. (Drawing No: 246(M)/FD-21(M)/FD-213)

Top Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 12mm thick, 7 No ply, ISI marked conforming to IS: 303-1989

Long rails

Short rails

Stiffeners 2nd class hard well seasoned (SAL) 40 mm x 30 mm

Veneer 1mm thick (Teak wood Shed) for Head Board, ISI marked

Veneer 1mm thick (Teak wood Shed) for foot Board, ISI marked

Mild steel clamp for head board and long rails

Taking out Mild steel clamp from unserviceable or demaged head board and refixing in same position of new head board or rails with new screw complete all as directed.

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Bed Ply wood Top/ Mewar (Escept plywood) (Drawing No: 246(M)/FD-21(M)/FD-213)

Repairs to Chair Writing for the following :- Removing old unserviceable fitting and fixture of Chair Writing without disturbing to the other parts such as legs,rails, stiffiners, Hand rest etc and supply and fixing with new items of well seacond 1st Class harwood ( TEAK) and minor repair applying French Polishone or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD-20(M) / FD 280)

Rear legs 1st class hardwood (TeaK)

Front legs. 1st class hardwood (TeaK)

Front /side rails of seat frame .

Back bottom 1st class hardwood (TeaK)

Arm rest. 1st class hardwood (TeaK)

Bottom Stiffener/ back 1st class hardwood (TeaK)

Repairs to Chair dining for the following :- Removing old unserviceable fitting and fixture of Chair dining without disturbing to the other parts such as legs,rails, stiffiners etc and supply and fixing with new items of Best quality 1 st class hardwood (Teak) and minor repair applying French Polishone or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD- 16 (M)/ FD-228/ FD-279 )

Rear legs 1st class hardwood (TeaK)

Front legs.1st class hardwood (TeaK)

Front / side rails of seat frame . 1st class hardwood (TeaK)

Leg Stiffener / Back rest 1st class hardwood (TeaK)

Taking out and removing unserviceable worn ot plastic cane from seat frame of Chair dining and Supply and weaving with new plastic cane in "Godrej" pattern with 2mm wide plastic cane for main canning and border with 3.5-5 mm cane complete all as specified and shown in drawing. (Drawing No. FD- 16 (M)/ FD-228/ FD-279 )

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Chair Dining. (Drawing No. FD- 16 (M)/ FD-228/ FD-279)

Repairs to Chair Wooden Bottom without Arms for the following :- Removing old unserviceable fitting and fixture of Chair without disturbing to the other parts such as legs,rails, stiffiners, Hand rest etc and supply and fixing with new items of well seacond 1st Class harwood ( TEAK) and minor repair applying French Polishone or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD-56(M) / FD 285)

Rear legs 1st class hardwood (TeaK)

Front legs. 1st class hardwood (TeaK)

Front /side rails of seat frame .

Back rail 1st class hardwood (TeaK)

Bottom Stiffener/ back 1st class hardwood (TeaK)

Seat Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Chair wooden Bottom without Arms. (Drawing No. FD-56(M) / 285 )

Repairs to Chair Easy for the following :- Removing old unserviceable fitting and fixture of Chair Easy without disturbing to the other parts such as legs,rails, stiffiners, Hand rest etc and supply and fixing with new items of well seasoned 1st Class hardwood (Teak) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD 17(M)/229)

Rear legs 1st class hardwood (TeaK)

Front legs. 1st class hardwood (TeaK)

Top rails of back . 1st class hardwood (TeaK)

Side rails of back . (Left/Right) 1st class hardwood (TeaK)

Front /side rails of seat frame . 1st class hardwood (TeaK)

Rear rails of seat frame . 1st class hardwood (TeaK)

Arm rest. 1st class hardwood (TeaK)

Taking out and removing unserviceable worn ot plastic cane from seat frame of Chair Easy and Supply and weaving with new plastic cane in "Godrej" pattern with 2mm wide plastic cane for main canning and border with 3.5-5 mm cane complete all as specified and shown in drawing. (Drawing No. FD- 17 (M)/ FD-229 )

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Chair Easy. (Drawing No. FD-17(M) / FD-229 )

Repairs to Table Wooden 900 mm x 900 mm x 760 mm (Table 3'x3') for the following :- Removing old u/s fitting /Fixture of Table 900 mm x 900 mm disturbing to the other parts such as legs,rails, top, stiffiners etc and supply and fixing with new items of well seasoned 1st Class hardwood (Teak) and minor repair applying French Polishone or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 88(M) / FD- 201)

Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5mm thick teak wood beading around the edging. (Drawing No: FD : 88(M) / FD- 201)

Long rail 1st class hardwood (TeaK)

Legs 1st class hardwood (TeaK)

Side rails 1st class hardwood (TeaK)

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Chair Dining. (Drawing No: FD : 88(M) / FD- 201)

Repairs to Table Wooden 900 mm x 600 mm x 760 mm (Table 3'x2') with/without Drawer for the following :- Removing old unserviceable fitting and fixture of Table 3' x 2' with and witout drawer without disturbing to the other parts such as legs,rails, top,stiffiners,Drawer etc and supply and fixing with well seasoned 1st Class hardwiid (Teak) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 41(M)/283/42(M)/55(M)/231/284

Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5mm thick teakwood beading around the edging.

Legs 1st class hardwood (TeaK)

Long rail 1st class hardwood (TeaK)

Side rails 1st class hardwood (TeaK)

Stiffeners 1st class hardwood (TeaK)

Drawer 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989 front side with 18 mm thick pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 one No 25mm knob of required colour complete all as specified and as directed.

25 mm dia chroumium plated Knob with brass nuts and bolts

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Table 900 mm x 600 mm ' with drawer (Drawing No. FD- 41(M)/ FD-283)

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Table 900 mm x 600 mm with out drawer (Drawing No. FD- 42(M)/55(M) /231/284)

Repairs to Teapoy for the following :- Removing old unserviceable fitting and fixture of Teapoy without disturbing to the other parts such as legs,rails, top,stiffiners etc and supply and fixing with new items of Best quality 1 st class hardwood well seasoned (Teak) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 34(M)/ 278)

Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class harwood (teak) beading around the edging.

Legs 1st class hardwood (TeaK)

Long rails 1st class hardwood (TeaK)

Side rails 1st class hardwood (TeaK)

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed toTeapoy. (Drawing No. FD- 34(M)/278)

Repairs to Table Peg for the following :- Removing old unserviceable fitting and fixture of table peg without disturbing to the other parts such as legs,rails, top,stiffiners etc and supply and fixing with new items of Best quality 1 st Class Hard wood wellseasoned (TEAK) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 25(M)/236/277)

Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1 st class hardwood (teak) beading around the edging.

Long rails 1st class hardwood (TeaK)

Short rails 1st class hardwood (TeaK)

Legs 1st class hardwood (TeaK)

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Table Peg. (Drawing No. FD- 25(M)/236/277)

Repairs to Table Centre for the following :- Removing old unserviceable fitting and fixture of Table centre without disturbing to the other parts such as legs,rails, top,stiffiners etc and supply and fixing with new items of Best quality 1 st class hardwood (Teak) and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 29(M) /274)

Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class haedwood beading around the edging.

Legs 1st class hardwood (TeaK)

Long rails 1st class hardwood (TeaK)

Side rails 1st class hardwood (TeaK)

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Table Centre. (Drawing No. FD-29(M)/ 274)

Repairs to Table dining 8 person for the following :- Removing old unserviceable fitting and fixture of Table Dining 6 Person without disturbing to the other parts such as legs,rails, top, stiffiners etc and supply and fixing with new items of Best quality 1st class hardwood (Teak) and minor repair applying of French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 30(M)/273)

Top of 18 mm thick particle board conforming to IS-3087-2005 with 1 mm thick plastic laminated sheet teak face shead on top using approved adhesive including 4mm thick 1st class hardwood (Teak) beading around the edging.

Legs 1st class hardwood (TeaK)

Long rail 1st class hardwood (TeaK)

Side rails 1st class hardwood (TeaK)

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Table Dining 8 Persons. (Drawing No. FD- 30(M)/ 273)

Repairs to Table dining 6 person for the following :- Removing old unserviceable fitting and fixture of Table Dining 6 Person without disturbing to the other parts such as legs,rails, top, stiffiners etc and supply and fixing with new items of Best quality 1st class hardwood (Teak) and minor repair applying of French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 30(M)/273)

Top of 18 mm thick particle board conforming to IS-3087-2005 with 1 mm thick plastic laminated sheet teak face shead on top using approved adhesive including 4mm thick 1st class hardwood (Teak) beading around the edging.

Legs 1st class hardwood (TeaK)

Long rail 1st class hardwood (TeaK)

Side rails 1st class hardwood (TeaK)

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Table Dining 6 Persons. (Drawing No. FD- 30(M)/ 273)

Repairs to Table Writing for the following :- Removing old unserviceable fitting and fixture of Table Writing without disturbing to the other parts such as legs,rails, top,stiffiners,Drawer etc and supply and fixing with new items of Best quality 1st class hardwood well seasoned (Teak) and 4mm thick wooden beading whereever required and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 33(M)/249/275)

Legs 1st class hardwood (TeaK)

Bottom Stiffeners 1st class hardwood (TeaK)

Back 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989 complete all as specified and as directed.

Shutter of size 450mm x 350mm with 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging including 50 mm long brass hinges

Sides of size 600mm x 560mm with 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.

Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.

Shelve of cupboard 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.

25 mm dia chroumium plated Knob with brass nuts and bolts

Taking out drawer from existing position and refixing the same after minor reppair like tighting thr screw wooden pin complete all as specified.

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Table writing. (Drawing No: FD: 33(M)/249/275)

Repairs to Table Bed side for the following :- Removing old unserviceable fitting and fixture of Table bed side without disturbing to the other parts such as top,legs,side, etc and supply and fixing with new items with well seasoned 1st class hardwood (Teak) and 4mm thick wooden beading whereever required and minor repair applying of French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD : 28(M) / 276)

Top/ bottom of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood (Teak) beading around the edging.

Side of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood (Teak) beading around the edging.

Shelve 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood beading around the edging.

Back Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 06mm thick, 4 No ply, ISI marked conforming to IS: 303-1989

Stiffeners 1st class hardwood well seasoned (Teak)

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Table Bed side. (Drawing No: FD: 28(M)/276)

Repairs to Almirah Mess Utensil for the following :- Removing old unserviceable fitting and fixture of almirah mess utensil such as top, bottom, front /back side,legs etc and fixing with new 1st class hardwood (Teak) , 6 mm thick teakwood face plywood with 4 mm thick wooden beading whereever required all as directed and minor repair as per required applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD - 39)

Legs 1st class harwood well seasoned (Teak)

Long rail 1st class harwood well seasoned (Teak)

Side rail 1st class harwood well seasoned (Teak)

Back side Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 9mm thick, 6 No ply, ISI marked conforming to IS: 303-1989

Shutter (Right/Left) with 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging including 50 mm long brass hinges

Aluminium anodised 100 long handle 'D' type

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Almirah Mess Utensil. (Drawing No: FD- 39(M)

Repairs to Book Case for the following :- Removing old unserviceable fitting and fixture of Book Case such as top, bottom, front /back side,legs etc and fixing with new 1st class hardwood (Teak) , 6 mm thick teakwood face plywood with 4 mm thick wooden beading whereever required all as directed and minor repair as per required applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD - 39)

Legs 1st class harwood well seasoned (Teak)

Long rail 1st class harwood well seasoned (Teak)

Short rail 1st class harwood well seasoned (Teak)

Bottom base of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.

Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.

Side of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging.

Shutter (Right/Left) with 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading around the edging including 50 mm long brass hinges

Partition of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4 mm thick 1st class hardwood (Teak) beading in front.

Back side Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 9mm thick, 6 No ply, ISI marked conforming to IS: 303-1989

25 mm dia chroumium plated Knob with brass nuts and bolts

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Book Case. (Drawing No: FD- 45(M)/237)

Repairs to Side board for the following :- Removing old unserviceable fitting and fixture of side board without disturbing to the other parts such as top,legs,side, top,drawers etc and supply and fixing with new items with 1st class hardwood (teak) and 4mm thick 1st class hardwood beading whereever required and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD - 26(M) / 241/ 1112)

Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class harwood (Teak) beading around the edging.

Side of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5mm thick timber beading around the edging.

Back Plywood (Make-Green Ply/Kit Ply,Century/Bhutan Board) 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989

Shutter 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood (Teak) beading around the edging. with one knob 25mm dia complete all as specified and as directed.

Shelve 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick t 1st class hardwood(Teak) beading around the edging. complete all as specified and as directed.

Drawer 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick timber beading around the edging complete all as specified and as directed.

Inside partition 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick 1st class hardwood beading around the edging with one knob 25mm dia complete all as specified and as directed.

Bottom 18 mm thick pre-lamintated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 4mm thick timber beading around the edging complete all as specified and as directed.

Long rail of bottom

Short rail of bottom

Teakwood shaded knob 25mm dia

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Side Board. (Drawing No: FD - 26(M) / 241/ 1112)

Repairs to Table Drassing Ladies for the following :- Removing old unserviceable fitting and fixture of Table drassing Ladies without disturbing to the other parts such as top,side, glass, mirror,knob etc and supply and fixing with new items and 5 mm thick wooden beading whereever required and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD-251)

Top of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5 mm thick timber beading around the edging.

Side of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5 mm thick timber beading around the edging.

Bottom of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5 mm thick timber beading around the edging.

Back of 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989 complete all as specified and as directed.

Drawer 6mm thick, 4 No ply, ISI marked conforming to IS: 303-1989 front side with 18 mm thick pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 complete all as specified and as directed.

Mirror 5 mm thick electro copper plated with 6mm thick plywood on back side with key plate (Modi/Atul Saint Gobbin )

Oridinary glass 5 mm thick sliding (Modi/Atul Saint Gobbin )

Legs 1st class hardwood (TeaK)

Mirror frame made out of well seasoned 1st Class hardwood includong 4mm thick beading alround the edge.

Supply and fixed teak wood shaded Knobs 25 mm dia

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Table Dressing Ladies with Mirror. (Drawing No: FD - 251)

Repairs to Hat stand with mirror for the following :- Removing old unserviceable fitting and fixture of Hat stand with mirror without disturbing to the other parts such as Particle Board,matel peg,mirror etc and supply and fixing with new items of Best quality and minor repair applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No: FD: 233)

Base of 18 mm thick Pre-laminated particle board Grade II Type I exterior grade conforming to IS-12823-2006 with one side teak finish fixed with 5 mm thick timber beading around the edging.

Chromium plated metal peg 120 mm long

Mirror 5 mm thick electro copper plated of size 300mm x 460 mm (Modi/Atul Saint Gobbin )

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Hat stand with Mirror. (Drawing No: FD - 233)

Removing of old PVC shoe from various Type of Chair dining, Table 3'x3, Teapoy, Table Peg, Table Centre, etc. and replacing the same with new 25mm dia and 20 mm high be screwed to bottom of legs all as specified an das directed.

Taking out of unserviceable back long rail from sofa 5 seater (3+1+1) and Material and labour with new 1st class hard wood (Teak Wood) of size 35 mm x 70 mm x 1680mm , well seasoned and applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD- 281)

Taking out of unserviceable stiffener in seat and back from sofa 5 seater (3+1+1) and Material and labour with new 1st class hard wood (Teak Wood) of size 20 mm x 50 mm x 600mm , well seasoned and applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD- 281)

Taking out of unserviceable cover of tapestry cloth with lining from Foam cushion of size 560mm x 530mmx100mm and supply and stiching with new lining and best quality tapestry cloth of approved quality and colour (not less than Rs. 280/- per RM) duly wraped and cover shall be of removable type by providing best quality plastic Zip over Tapestry cloth complete all as specified and as directed. (Drawing No. FD- 281)

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Sofa Set 4/5 Seater. (Drawing No: FD - 281)

Taking out of unserviceable Arm rest (Handle) from sofa 5 seater (3+1+1) and Material and labour with new 1st class hard wood (Teak Wood) arm rest (Handle) as per existing, well seasoned and applying French Polish one or more coat till glossy finish achieved to match with existing surface complete all as specified and shown on drawing. (Drawing No. FD- 281)

Taking out and removing unserviceable worn ot plastic cane from seat frame of Chair writing and Supply and weaving with new plastic cane in "Godrej" pattern with 2mm wide plastic cane for main canning and border with 3.5-5 mm cane complete all as specified and shown in drawing. (Drawing No. FD-20(M) / FD 280)

Material and labour for preparing and polishing wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved including filler as required all as specified in particular specifications and as shown on drawing and as directed to Chair writing. (Drawing No. FD-20(M) / FD 280)

M/S East India Traders

M/S SARKAR BROTHERS