Construction of link road from Gheena to Lohar Lahri Jandrah Km 0/000 to 6/980 (SH Construction of R/Wall, cross drainage, Drain, Parapets and Metalling Tarring in Km 0/000 to 5/200)

Amount

Earth work in excavation for all type of road structures such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out of rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification clause 305 and 1603 and as per direction of the Engineer-in-Charge including setting out, shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any leads and lifts, including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty milimetres) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantam of water including cleaning of slush which may arrise out during dewatering and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete nominal mix 1: 4: 8 (one cement: four sand : Eight graded crushed/broken stone aggregate 40mm (forty millimeters) nominal size) in Retaining Wall & Breast wall as per drawing and MORD technical specifications section800, 900, 1200 & 1600 including cost of form work and curing and dewatering if required and including carriagte of materials, within all leads, lifts and other incidentals as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain/reinforced concrete in sub-structure for all type of structure complete using plain cement concrete grade M-15 (M-Ffifteen) design mix using graded crushed stone aggregate 40mm (Forty millimeter) nominal size with cement contents not less than 275 Kgs (Two hunred seventy five kilograms) per cubic metre on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/depths including the cost of form work in abutments as per drawings and M.O.R.D. technical specification section 800, 900 & 1200 as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls with 100mm (Hundred millimeter) dia P.V.C pipe extending through the full width of the structure with a slope of I(V):20(H)(One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification Clauses 709, 1206.6 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying machincally mixed and vibrated plain cement concrete in open forndation for all type of structrures complete nominal mix 1:3:6 (One cement: three sand: Six graded broken/crushed stone aggregate 40mm(forty millimetre) nominal size) on ground or under water including curing complete pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of formwork in drain as per drawing and MORD technical specification Clause 800, 900 & 1200 and as per direction of Engineer-in-Charge. Including carriage of material within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying machincally mixed and vibrated plain cement concrete in open foundation for all type of structrures complete nominal mix 1:3:6 (One cement: three sand: Six graded broken/crushed stone aggregate 20mm(twenty millimetre) nominal size) on ground or under water including curing complete pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of formwork in drain as per drawing and MORD technical specification Clause 800, 900 & 1200 and as per direction of Engineer-in-Charge. Including carriage of material within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated for plain cement concrete in open foundation for all type of structure complete using plain cement concrete grade M-15 (M-Fifteen) design mix with cement contents not less than 275kg (two hundred seventy five kilogram) per cubic metre on ground or under water including curing complete including pumping or bailing out water , dewatering, removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work in toe wall etc; complete as per drawings and MORD technical specification section 800, 900 & 1200 as per direction of Engineer-in-Charge. Including carriage of material within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforecd cement concrete in sub-structures in all types of structures cement concrete grade M-20 (M-Twenty) design mix with cement contents not less than 330 Kgs (Thtree hundred thirty kilogram) per cubic metre with 20mm (Twenty millimetres) nominal size graded crushed stone aggregate and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work complete as per drawings and MORD technical specifications section 800, 900 & 1200 and as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated Reinforced Cement Concrete in super-structure for all type of structure using cement concrete grade M-25 (M-Twenty five) designed mix with cement contents not less than 400 Kgs (Four hundred kilograms) per cubic metre with 20mm (Twenty milimetres) nominal size graded crushed stone aggregate as per drawing and M.O.R.D. technical specification section 800, 900 & 1400 including the cost of form work and curing complete but excluding the cost of reinforcement for reinforced concrete work in deck slab and wheel guard including carriage of materials within all leads, lifts and other incidentals as per the entire satisfaction and direction of Enginee-in-Charge. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-Thirty) mix designed with minimum cement contents not less than 430 Kgs(Four hundred thirty kilograms) per cubic metre with 20mm(Twenty milimetres) nominal size graded crushed stone aggregate in wearing course including reinforcement for reinforced concrete work and form work and curing complete as per drawings and M.O.R.D. technical specifications section 800, 900, 1000 & 1400 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying rubble stone flooring in cement mortar 1:3 (One cement : three sand) laid over cement concrete bedding complete as per drawing and M.O.R.D. technical specifications clause 1303 and curing complete including carriage of materials within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement (Fe 415) in sub-structure complete as per drawing and M.O.R.D. technical specifications section 1000 & 1200 including cutting, bending, binding, straightening and placing in position complete in all respect including cost of binding wire upto any height and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and M.O.R.D. technical specifications section 1000 & 1400 including cutting, bending, binding, straightening and placing in position complete in all respect including cost of binding wire upto any height and as per drawings and MORD technical specification and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Backfilling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and M.O.R.D. technical specifications clause 1203 & 1604 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing drainage spouts complete with 100mm (one hundred millimetre) dia galvanised mild steel down pipe corrosion resistant structural steel grating complete as per drawing and MORD technical specifications section 1400 and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Reinforced and laying mechanically mixed and vibrated reinforced cement concrete design mix having cement content not less than 400 kg (four hundred kilogram) per cubic meter with 20 mm (twenty milimetre) nominal size graded crushed/broken aggregatepf grade M-25 (M- Twenty Five) as per drawing and MORD technical specifiaction clause/section 800, 900, 1001 and 1404 including the cost of form work and reinforcement for reinforced concrete work in approach slab and curing complete including carriage of materials within all leads, lifts and other incidental .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Construction of Reinforced Cement Concrete mechanically mixed and vibrated railing of Grade M-25 (M-Twenty five) design mix having cement content not less than 400 kg (four hundred kilogram) per cubic metre with 20 mm (twenty milimetre) nominal size graded crushed stone aggregate with cast in situ vertical post and precast horizontal post (top , middle and bottom) as per drawing true to line and grade of MORD tolerance of vertical railing post not to exceeded 1 in 500 (One in Five hundred) centre to centre spacing between vertical post not to exceed 2000 mm (Two thousand milimetres) leveling adequate space between vertical post for expansion complete including cost of reinforcement, form work and curing complete as per drawing and MORD technical specifications section 800,900, 1000 & 1200 including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded with motor grader and compacted in layers to meet requirement of Tables 300.1 and 300.2 with three wheel for subgrade construction as per MORD Technical Specification Section 300 complete as per approved drawings and as per direction of Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Construction of granular sub-base by proving well graded material 150 mm (one hundered fifty milimetre) consolidated thickness sprading in uniform layers with tractor mount grader on prepared surface mixing by mix in place method with rotavator at OMC with tractor mount appropriate rotavator attachment and compcation with three wheel 80-100 KN static roller capacity to achieve the desired density complete as per MORD Technical specification Section 400 for Grading 1 material as per the entire satisfaction and direction of Engineer-in Charge including carriage of material within all leads, lifts, and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing, laying, spreading and compacting by mechanical means stone aggregate of size 63mm to 45mm (sixty three millimetre to forty five millimetre) Grading-II [75mm (seventy five millimetre) compacted thickness] to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty-Hundred) K.N. static roller in stages to proper grade and camber applying and brooming, stone screening type-B of size 11.2mm (Eleven point two milimetres) nominal size at the rate of 0.20 cum (zero point two zero) cubic metres per 10 sqm (per ten square metres) and binding material at the rate 0.06 cum (zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD technical specifications clause 405 and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing, laying, spreading and compacting by mechanical means stone aggregate ofsize 53mm to 22.4mm (fifty three millimetre to twenty two point four millimetre) Grading-III [75mm( seventy five millimetre) compacted thickness] to water bound macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty-Hundred) K.N. static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2mm (eleven point two milimetres) nominal size at the rate of 0.18cum (zero point eighteen) cubic metres per 10 Sqm (per ten square metres) and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per technical specifications Clause 405 and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @ 0.85 Kg (Zero point eight five) per square metre using mechanical means as per MORD technical specifications Clause 502 and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kgs (Zero decimal Two Seven Five kilograms) per square metre on the prepared granular surface treated with primer and cleaned with Hydraulic broom as per MORD Technical Specification Clause 503 and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing, laying and rolling of open graded premix carpet of 20mm (twenty millimetre) compacted thickness, composed of type-A 13.2mm (thirteen decimal two millimetre) nominal size crushed stone aggregate in ratio of 2:1 (two:one) respectively at the rate of 0.27 cum (Zero point two seven cubic metre), mixed with penetration grade bitumen VG-10 (Viscosity Grade ten) at the rate of 14.6 kg (Fourteen point six kilogram) per ten square metres of road surface to required line, grade and level to serve as wearing course on a previously prepared base including mixing and heating binder and aggregate in Hot Mix Plant 30/40 (Thirty/Forty tonne) per hour capacity transporting mixed material with tipper to site of work by mechanical means and laying with paver finisher to the required grade and camber and rolling complete with three wheel 80-100 (Eighty - Hundred) KN static road roller finished to required level and grade to be followed by seal coat as per MORD technical specifications clause 506 including hauling of materials labour and equipment required to execute the work at site of work with in all leads and lifts, as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B by mannual means using bitumen VG-10 (Ten) at the rate of 6.80 Kg (six point eight zero kilogram) premixed with 0.06 cubic meter of fine aggregate per 10 (ten) square metre heated in mini hot mix plant and laying of mixed material and rolling with power road roller 8-10 Tonne capacity as per drawing and MORD Technical Specification Clause 508 and as per direction of Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Rohit