GENERAL Mini Indoor Stadium Kanhangad Additional electrifications and installation of lightning arrester General Electrical WorkElectification

Amount

lightning arrester and additional electrification

OD129329/2025-2026:Supply and installation of LED Luminaire movable lamp pole having minimum 63mm diameter structural galvanised GI work in built up tubular (round, square or rectangular hollow tubes etc.) including cutting, hoisting, fixing position and applying a priming coat of approved primer, including welding ,4 nos wheel assembly fitted in existing GI foundation,junction box and suitable cross arm bracket 1mtr long with adequate foundation special weight bar (25kg) etc. complete 3 Meters

OD69142/2025-2026:Supply, Conveyance, installation, testing and commissioning of 45W LED BACKLIT PANEL 4'x1' Made up of CRCA body with PC diffuser with toughened glass and high power LEDs and secondary lenses with IP20 protection .Available in Recessed mounting.Photometric data is 4500 lm/smd,luminous efficacy-100lm/w.Product code:LKM4145 ,Model: 45W BACKLIT,Make: LUKER

1.10.2:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B

1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

OD87714/2025-2026:Supply, conveyance, installation, testing and commissioning of cast aluminium stove enameled elliptical shaped bulk head fittings directly on wall including cutting necessary holes, giving connections with the extended orginal wiring, making good the damgaes, colour washing etc as required.

OD87715/2025-2026:Supply and providing the following types and power rated lamps in the existing fittings as required. B22 LED bulb 9W

1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

90.6.5.12:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm

1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

90.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

90.10.3.33:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket

90.10.3.32:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3 pin plug top with indicator

1.26:Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

OD129700/2025-2026:Supply and Installation of SMC junction box GSJB 2520, 4 Way 250x200x105mm,(Sintex Junction box GSJB2520).

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

90.12.7.41:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.39.34:Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm

9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD252815/2023-2024:Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required. 25x6 mm brass nut and bolt etc. as required.

OD252807/2023-2024:Supplying and installation of supports, anchor bolts etc made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint

OD68689/2025-2026:Supplying and fixing Transperant acrylic sheet as diffuser in existing LED flood lamps, including cost, Conveyance,labour charges etc in suitable size

OD252816/2023-2024:Painting letters or figures with enamel paint as identification mark to SB, DB, panel board etc as required.

OD113336/2025-2026:Supply,providing and fixing of fully solid 2m Vertical Air terminal made up of Semi-hard (E-AlMgSiO5), 16mm rod tapered to 10mm.Cape - VAT 2 or Equivalent

OD119549/2025-2026:Supply,providing and fixing of Interception Tip made up of semi-hard(E-AIMgSiO5) to provide on the top of vertical air terminal Cape-ITVAT or Equivalent

OD119579/2025-2026:Supply,providing and fixing of Stainless Steel SS 304 Wall Clamp to mount Vertical Air Terminal 1 meter to 5 meter Cape-WC16 SS or Equivalent

OD122751/2025-2026:Supply, providing and fixing of Down conductor(8mm solid aluminium alloy round conductor) made up of semi-hard(E-AIMgSiOS) Cape-SRC8-AL or equivalent.

OD122795/2025-2026:Supply, providing and fixing of whether resistant Nylon Parapet Conductor Holder for fixing horizontal conductor &down conductors.The conductor holder has to fixed using fischer and SS screws Cape-PCH 8 or equivalent.

OD122833/2025-2026:Supply,providing and fixing of Stainless steel Clamping Shoe-Cape-CS8-10 or equivalent

OD122865/2025-2026:Supply,providing and fixing Aluminium Alloy Ferrule Straight Connector for Expansion piece joints and other straight joints to avoid bimetallic corossion.Crimping has to be done minimum in 4 points for strong bonding.Cape-CJ 8 or equivalent.

OD122928/2025-2026:Supply,providing and fixing of Stainless Steel SS 304 Test Joint.The 8mm & 10mm Conductor has to be straightly connected to avoid risk of flash over and needs to have disconnection facility to measure values during testing,it has to be a butterfly type test joint having the provision to disconnect 8mm Aluminium and 10mm copper bonded steel seperatly in order to test individual earth pit value minimum 4 screw/bolt joints required for strong bonding.Cape-TJRRGI or equivalent

OD122942/2025-2026:Supply,providing and fixing Outdoor Glass Fibre Reinforced Polycarbonate enclosure having minimum inner dimension of 110mmx110mmx67mm.Cape-Abox 60 or equivalent

OD123005/2025-2026:Supply,providing and fixing of DIN Rail Surge Protcction Device(4+0)Class B&C/Type1&2 with total impulse current-50 KA (10/350u sec)&Total max discharge current 200KA(8/20u), voltage protection level <1.5kv>.The surge protection device should have TOV safefail for 120 min;442V. Health status indication in all catridges.Total response time <25 nano seconds Cape-Protec TI (4+0) or equivalent

OD123030/2025-2026:Supply,providing and fixing of DIN Rail Surge Protcction Device(4+0)Class B+C/Type1+2 with total impulse current-10 KA (10/350u sec)&Total max discharge current 200KA(8/20u), voltage protection level <1.5kv>.The surge protection device should have TOV safefail for 120 min;442V. Health status indication in all catridges.Total response time <25 nano seconds Cape-Protect T2(4+0) or equivalent

OD123097/2025-2026:Supply,providing and laying Copper coated steel solid round conductor 10mm diameter with copper coating thickness of 100microns for laying conductor after test link and for ring earthing at a depth of0.5 mtr from ground level.Needs to be routed inside heavy duty 20mm PVC pipe after test link @ a height of 2.5 meters from ground level. Cape-SRC-10-CU or equivalent

OD123154/2025-2026:Supply,providing and fixing of Stainless steel SS 304 Earth Rod Connection Point to insert 10mm Copper bonded steel to 14.2mm Copper bonded rod.The connection has to be strongly bonded using strong bolt. Cape-CPES 8 or equivalent

OD123333/2025-2026:Supply,providing and fixing of 2.5m earth rod (with 20mm diameter and copper bonding thickness of minimum 250 microns) with bore and peg arrangement. Cape-CBR 2008 or equivalent

OD123341/2025-2026:Supply,providing and fixing of SS Earth Rod Clamp 14.2mm & 17.2mm/20mm & 25mm for easy insertion of earth rod to soil. Cape-SSERC1417/SSERC2025 SS or equivalent.

OD123349/2025-2026:Supply,Providing Earth Enhansing Mineral compound (5kg) for improving earth soil conductivity.It should be pollusion free and hazardous substances and chemically inert.Resistivity of the compound has to less than or equal to 0.2 ohm meter.Cape-PROSAN 5 or equivalent.

OD123376/2025-2026:Supply and installation of FRP Earth Electrode inspection chamber minimum dimension has to be 290x290x209mm.Minimum weight bearing capacity has to be 60KN.Cape-EC 290 or equivalent.

HARIS T A (BID ID -2431722)

Bidder Name

Suresh.R.C

HARIS T A