Annual painting of the Residential Buildings (Area - Part B) in the colony area in NMPA

Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with wire brush complete as per direction of Engineer in charge of work.

Cleaning of reinforcement from rust by Alkaline solution thoroughly as per direction of Engineer in charge of work.

KSRRBM 2800-11. Epoxy bonding of new concrete to old concrete including cost of materials,labour, HOM complete as per specifications. MORTH Specification No. 2805

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification.

Cutting out cracks on the walls to V - section cleaning out the area thoroughly to free it from dust and loose particles and filling solidly with 'Crack seal' in two coats using putty knife or trowel and applying a coat of primer for a width of 15 cms along the crack, including cost of materials, tools and plants, labour, scafolding etc. complete as per specifications in the product catalogue and as directed by the Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

a) Finishing walls with Acrylic exterior paint (One coat )Area of painting 34,820 Sqm (Approximate) b) Wall painting with acrylic emulsion paint (One coat ) Area of painting 78,290 Sqm (Approximate) c) Painting with synthetic enamel paint (One coat )Area of painting 20,045 Sqm (Approximate) d) Epoxy Paint (Two coats) Area of 6210 Sqm (Approximate) e) Floor painting with water based floor paint Area of painting 14270Sqm (Approximate) f) Removing white or colour wash : Area of 12,670 Sqm (Approximate) g) Finishing walls with Premium Acrylic Smooth exterior paint(One coat) : Area of painting 12,670 Sqm (Approximate)

Painting and rewriting door Numbers on wall in white enamel paint in english (both single and double numbers) of height 7.5cm , in black back ground of circular shape of dia 15cm , cost inclusive of cost of material labour, scaffolding, tools and plants, all other incidental charges etc, complete.