SPECIAL REPAIRS TO RESIDENTIAL BUILDING (BLDG NOS P-217/01, P-217/02 AND P-217/03) AT NAD BHEEMUNIPATNAM UNDER GE (P) NAVY KALINGA VISAKHAPATNAM

Amount

Taking down old tarfelt treatment from roof surfaces including plaster etc complete.

M&L cutting crack to 'V' groove section in existing roof/ wall cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof padding over roof slab, roof kerbs , haunching or mud stop rounded or chamfered on edges all as specified & directed.

M & L for screed bed 15 mm thick on roof padding in CM 1: 4 finished fair and even without using extra cement.

M&L for water proofing treatment on roof slab portion consisting with following operation (i) Cleaning surface by wire brushes, brooming, removing dust and applying with bitumen primer confirming to IS 3384- 1986 @ 0.50 Kg per Sqm. (ii) Applying a tack coat of hot bitumen 85/25 @ 1.2 Kg per Sqm for water proofing membrane (iii) Applying of Polymeric water proofing membrane wt not less than 3 Kg per Sqm over entire area with overlapping and sealed all as specified and directed (iv) Applying a bituminous aluminium primer/paint 0.10 kg per Sqm complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc

M & L for 20 mm thick Granite (of any type) machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite over a screed bed of 20mm thick in cement mortar (1:6)

M&L for Makrana white/ Green Marble 18-20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting , rubbing & polishing as in steps/shelves/ cill over 15 mm thick rendering with CM (1:6), etc complete all as specified& directed.

M&L for Makrana white/ Green Marble 18-20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting , rubbing & polishing as in steps/skirting /shelves over 10 mm thick rendering with CM 1:4, etc complete all as specified& directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15mm thick screed bed of CM 1:6 complete of item all as directed.

M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over backing of 10 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces

M & L for Plain Cement concrete 25mm thick type B-1, 1:2:4 (20mm graded aggregate) in sub base

S&F non skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15mm thick screed bed of CM 1:6 complete of item all as directed.

M&L glazed ceramic coloured tiles 300 x 450 of 6-7 mm thick as in vertical surface set & jointed in neat cement slurry & pointed with coloured cement to match over 10 mm thick rendering with CM (1:4) all as specified & directed.

M & L for designer cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey and cement pigment in floors over a screed bed of 20mm thick in cement mortar (1:6)

M & L for Treatment of soil under existing floors using emulsion @ one litre per hole , 300 MM apart including drilling and plugging 12 MM dia holes with cement mortar 1:2 to match the existing floors.

M & L ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same .

M& L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75mm thick PCC 1:3:6 type C1 using (20 mm graded stone aggregate) as in plinth protection , pavement surface finished even and smooth without using extra cement complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar

M&L for Half Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4

Taking down cement plaster on brick walls incl racking out joints hacking for key scrubbing down with water etc complete.

M&L for demolition of broken/ loose sides & soffits of beam/chajja/drop/facia surface or taking down old plaster and repair to broken/ damaged surface by making good with PCC 1:2:4 type B0 or cement mortar 1:3 incl rendering 15 mm thick with using water proofing compound in cement mortar 1:4 incl necessary form work wherever required including reinforcement duly welded if required .

M&L for rendering cement plaster 15 mm thick on other than fair faces wall in CM 1:6 finished even and smooth without using extra cement.

M&L for rendering cement plaster 15 mm thick on fair faces wall in CM 1:4 finished even and smooth without using extra cement with WPC. Note: WPC will be measured and paid separately under relevant item as supply only

M&L for rendering cement plaster 5 mm thick on fair faces of ceiling in CM 1: 3 finished fair and even without using extra cement.

Supply only integral water proofing compound

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

M/L for reinforced cement concrete for shelves , chajja etc Type A1 1:1.5:3 (20 mm gde agg) and setting complete.

M/L for Mild Steel TMT bars of 10 mm dia and cut to length bent to shape required incl cranking ,bending and binding with and incl mild steel wire annealed not less than 0.9mm dia complete

M&L for formwork to soffits & sides of suspended slab , landing and similar items n exc 200mm thick as directed.

Provn of making hole in marble/granite slab of cooking platform for cooking gas pipe etc by means of drilling machine n.exc 25 mm dia all as directed by Engineer-in-Charge

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down Chowkhats or frames exc. 1.5 sq. m but n exc 4.0 Sqm each with shutters (without taking off shutters from the frames)

Taking down shutters of any description exc 1 but n.exc 2.0 sq. m each

Taking down & refixing Shutters of any description exc 1 Sqm and n. exc 2 Sqm each

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed..

S&F angle iron/ Flat iron work as in hold fast ,support of valley gutter and nosing etc. conforming to Fe-290 Gde-165

Material & labour for PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregates as in hold fast block complete.

S&F II class Hard wood , factory made, 35 mm thick plain framed, panelled shutters ( Two panels),with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particles board with commercial veneering on both faces. the size of rail and stile as per IS 2009 (part-I)

M & L for 35mm thick IInd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);

S & F Solid PVC Door Frame of size 100mm x 60mm made out of 5mm WOOD GRAIN printed PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with printed sheet, reinforced with M.S. Square tube, complete as per specification and as directed by the Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make manufacturer. The inside panel shall consist of 20mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cyanoacrylate adhesive with 5mm (+0.25) thick moulded PVC sheet of density 600kg/Cbm Manufactured by an ISO-9001-2015 certified company. with 2,4,6 raised panel design in plain / prelam colours after routing the moulded design on one side of the inside panel. 5mm (+ 0.25) plain/ prelam pvc sheet to be pasted using solvent cement/cyanoacrylate adhesive on other side of the Hollow PVC section. All the edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (made by sticking 2 Nos. foam PVC sheets of 5mm (+ 0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/ prelam moulded PVC sheet of door .20mm thick (5mm x 4 nos.) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. stainless steel butt hinges of size 100 mm x 2mm x 2mm and 50mm long steel screws drilled suitable to pass through both the walls of the M.S tube other hardwares should be fixed with 25mm x 8mm size steel screws etc. complete all as per direction of engineer-in-charge.

S & F 100 mm butt hinges mild steel, medium weight, cold rolled of Type-B-12

S & F of 200 mm aluminium anodised, barrel tower bolts of extruded section

S & F 150 mm aluminium handles, cast type, anodised extruded section

S & F 100 mm aluminium handles, cast type, anodised extruded section

S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F UPVC window,(unplastisized poly-Vinyl Chloride) sliding windows multi-chambered and stiffened framed windows using 88mm x 52mm size sections all-round as main frames and shutters made with profile sections of size 57mm x 42mm, including the cost and fixing of 5mm thick tinted glass in shutters and stainless steel wire mesh shutters shall have well defined welded corner joints without any gaps, fixed the window unit to the existing masonry with anchor fasteners as required. The shutters shall have necessary handles and other associated fittings to facilitate smooth operation. Both the frames and the shutters shall be reinforced with GI profiles of thickness 1.25mm the entire window is covered with MS powder coated tube of size 40mm x 20mm all-round the frame the frame section incl 10 mm square bars horizontally placed at 120mm C/C and suitably placed vertically as guard bar to avoid buckling and providing structural strength, minimum weight shall be 10kg/Sqm and fixed to UPVC frames with suitable fasteners. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials complete all as specified and directed. Make : Rajshri Plastiwood/Sintex/Duroplast Extrusion Pvt. Ltd

S&F anodised aluminium ventilator shutters with frame of fixed type half bottom and air vent louvers top half portion for fresh air ventilation purpose of aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified.

S&F 4 mm thick figured glass, pin head type and glazing with ordinary quality and glazing with oil putty in square n. exc. 0.5 Sq.m. in each pane complete all as specified and as directed by the Engineer-in-Charge.

S & F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S & F stainless steel pipe 25mm dia Curtain rod for Windows, doors opening etc

S & F Fancy type CP Knobs for fixing curtain rod all as directed and specified

S & F for 18 mm thick Prelaminated MDF board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in cupboards etc

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised for 30 mm flaps

M/L for hasp and staple Aluminium anodized ,incl bolt to hinge plate and fixed with screws 100 mm long.

S&F 2nd class hardwood plain fillets square , rectangular or triangular in section wrought secured with nails or brads exc 13 & n exc 25 sqcm in area as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F 1.6 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete.

S & F in repairs PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls

S & F in repairs PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls

S & F PVC (SWR) vent cowl 110mm

S & F PVC (SWR) vent cowl 75mm

PVC (SWR) bends any radius 75mm with access door

PVC (SWR) bends any radius 110 mm

PVC (SWR) bends any radius 110 mm provided with access door

PVC (SWR) double 'Y' branch piece junction , single equal or unequal 110 mm bore

S&F 50 mm bore PVC pipe of (LDPE) of pressure rating 6 kg/cm2 laid in trenches

S & F in repairs Bib taps 15mm dia Fancy type Chromium Plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S & F in repairs two way bib cock, CP, Fancy type - 15mm dia for 'hot & cold '

S & F in repairs 15mm bore dia Pillar taps Fancy type, chromium plated, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F in repairs 15mm bore dia Stop valves concealed type fancy Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions .

S & F in repairs 15mm bore dia angular Stop valves concealed type fancy Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions .

S & F in repair Health Faucet for 15mm dia with 1.5m long easy flex tube in Chrome finish and wall look

S & F in repairs Tubular towel rod brass chromium plated, 20mm dia, 60cm long between flanges

S & F in repairs Tubular towel rod brass chromium plated, 20mm dia, 40 cm long between flanges

S&F 5mm thick glass self with chromium plated frame of 600 mm long .

S&F 5mm thick corner glass self with chromium plated frame of size 200 mm

S&F in repair wash Hand basin, white ,flat back of size 550x400 mm excluding taps ,waste, chain and plug but including brackets incl cutting and for pinning in ends of brackets.

S&F 32 mm waste fitting brass chromium plated for sinks , basin etc with long screwed shanks and fly nuts , flange etc.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts and Seat Cover)

S&F in repair PVC Flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket complete all as specified and directed.

S & F in repair Soap dish chromium plated, fixed to plugs with chromium plated brass screws

S & F in repairs Brass chromium plated shower rose 125mm size

S & F in repair PVC flexible connections 15mm size with PTMT nuts of length 600mm

S & F in repair 110/125 mm PVC (SWR) gully trap, plain with grating including jointing with solvent cement

S & F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F PVC waste pipe 32 mm bore fixed to waste coupling for sinks & basin etc.

M/L for SS chromium plated plate rack of size 600x750mm made by 1 mm thick sheet all as approved by GE.

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site.

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site.

Taking up or down 25mm bore, steel tubing and connection including cleaning for refixing or removal from site.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm

S & F 16 mm outer dia, 3-layer PP-R P o l y p r o p y l e n e random copolymer) for concealed pipes SDR 7.4 (PN - 16) UV stabilised and a n t i m i c r o b i a l fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

S & F 25 mm outer dia, 3-layer PP-R P o l y p r o p y l e n e random copolymer) for concealed pipes SDR 7.4 (PN - 16) UV stabilised and a n t i m i c r o b i a l fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

S & F 32 mm outer dia, 3-layer PP-R P o l y p r o p y l e n e random copolymer) for concealed pipes SDR 7.4 (PN - 16) UV stabilised and a n t i m i c r o b i a l fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting n exc 10cm girth

S&F in repair 32 mm outer dia PP-R gate valve (brass insert) as per requirement of site complete all as specified.

Dismantling water tanks and removing to store exc 250 lit & n exc 500 lit in capacity

Supply & fixing in position of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) all as specified in SSR Part I of capacity 1000 ltrs

M & L for on new plastered surface (internal walls) and applying two coats of Oil bound distemper over a coat of primer over wall care putty of 1 mm thick all as specified and directed

M & L for complete removal of existing treatment on internal walls and applying two coats of Oil bound distemper over a coat of primer over wall care putty of 1 mm thick all as specified and directed

M & L for preparation of new surface of walls and applying two coats of Exterior emulsion weather coat paint over a coat of primer over wall care putty of 1 mm thick for external surface on walls complete all as specified and as directed by the Engineer-in-Charge.

M & L for complete removal of existing treatment on walls and applying two coats of Exterior emulsion weather coat paint over a coat of primer over wall care putty of 1 mm thick for external surface on walls complete all as specified and as directed by the Engineer-in-Charge.

M & L for preparation of old surfaces and applying two coats of white wash on Ceiling

M & L for preparation of new surfaces and applying three coats of white wash on Ceiling

M/L for painting one coats of synthetic enamel on old wooden surfaces over a coat of pink primer of any description not otherwise described over 10 cm width or girth on new surfaces

M&L preparing new wooden surfaces of any description not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed .

M&L preparing new steel surfaces of any description not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided .

M&L Stain less steel Pipe conforming to grade 304 as in framed work such as railing, walkway etc and similar work including fixing in floors and wall with drilling and welding complete all se specified and as directed.

S&F Pulley operated clothes drying system, Pull- it 7 feet long with 4 pipes consisting of anodised Aluminium pipes each of outer dia 22mm and inner dia 19.80mm fixing on ceiling complete all as specified and directed by Engr- in- charge. Note:- (i) Pulley made up of delrin with rope guide mounted on channel pair of length 24"( distance between two pipes is adjustable). (ii) Locking system to hide rope knot. (iii) Channel to be mounted or fixed with self- tapping screws provided in kit. (iv) rope will be polyester braided, undyed of 4mm dia. (v) Pulley operated clothes drying system Pull- it 7 feet long with 4 pipes

M&L for Providing and applying acrylic cementitious , elastomeric , two component waterproof coating of master builders solutions or equivalent , by mixing both the components to a lump free consistency by suitable means and applied on the prepared surface in 2 or 3 coats at an interval of 4 to 8 hours between coats , depending on the atmospheric conditions , applied at a total consumption of 3 Kg/Sqm to achieve a total dry fill thickness of 1.5 mm and coating shall be continued along the wall and allowed to cure etc. Coating shall offer the following performance properties. 1.Tensile strength-1 MPa as per ASTM D 412 2.Elongation -35 % as per ASTM D 412 3.Water penetration -No leakage at 5 bars as per DIN 1048

M&L for cutting steel tubing of 50/40 mm bore for alternation and addition complete all as specified and as directed.

M&L for cutting steel tubing of 25 mm bore for alternation and addition complete all as specified and as directed.

M&L for galvanized iron tubing 25 mm bore medium grade with all fittings laid in trenches complete all as specified and as directed.

M&L for galvanized iron tubing 40 mm bore medium grade with all fittings laid in trenches complete all as specified and as directed.

S&F 25mm dia gun metal globe gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 50mm dia gun metal globe gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 40mm dia gun metal globe gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 500 Litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked hoisted and fixed in position including fittings complete all as specified and as directed by the Engineer-in-Charge.

M&L For road cutting including excavation in trenches for laying CI/GI Pipe not exc 45 cm wide and exc 75 cm depth as per site requirement including making good the disturbed surfaces with cement concrete (1:3:6) type C-1 and top surface neatly finished to match with the existing complete all as specified as directed.

Taking down carefully existing aluminium conductor point wiring (light / fan / socket or power point) complete, with all fittings such as switches, socket, regulator, ceiling rose, utility light fittings and lamp holders etc and removing materials from site and making good the disturbed surfaces of walls roof and floor etc as per existing specification complete all as specified and as directed.

Taking down carefully by unscrewing from boards / outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and fan regulators etc. for reuse at site complete all as specified and as directed. Note : To be measured only when found serviceable in all respects complete for reuse

Material and labour for point wiring for one light controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn carefully through existing/New concealed conduit along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including new pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including making good disturbed surface all as specified and as directed.

All as per Item no 129 here-in-before but for one light point controlled by two 2 way switch all as specified and as directed.

All as per Item no 129 here-in-before but for one fan E/Fan point controlled by 1 one way switch and regulator all as specified and as directed.

All as per Item no 129 here-in-before but for one 3 pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per Item no 129 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches all as specified and as directed

All as per Item no 129 here-in-before but for one16 Amp 3 & 5 pin switch socket outlet, independent with 4.0 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 4.0 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

All as per Item no 129 here-in-before but for one bell point controlled by one bell push on the same board with other switches or independent all as specified and as directed.

M & L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI mark with stranded aluminium conductor 1100 Volts grade, cross sectional area 35 Sqmm 3.5 Core laid in trenches/poles/ on wall all as specified and as directed.

Supply and fixing socket combination 2 in 1 3 pin 5 and 15 amp flush type universal all as specified and as directed.

Supply and fixing Metal clad plug & AC socket combination 20A 2P +E, 230V AC all as specified and as directed.

Supply and fixing switch piano flush button single pole one way 5 amps all as specified and as directed.

Fixing only switch flush button single pole one way 5 amp all as specified and as directed. (Note : Material obtained from item No 128 here in before shall be used)

S&F switch flush type, single pole Two way 5 Amps 230 volts all as specified and as directed.

Supply and fixing socket combination 2 in 1 3 pin 5 amp flush type universal all as specified and as directed.

Fixing only switch socket outlet 5 amp flush type all as specified and as directed. (Note : Material obtained from item No 128 here in before shall be used)

Supply and fixing ceiling rose surface bakelite three terminals all as specified and as directed.

Fixing only ceiling rose surface bakelite three terminals all as specified and as directed. (Note : Material obtained from item No 128 here in before shall be used)

Supply and fixing fan regulator electronic deluxe rotary step type all as specified and as directed.

Fixing only fan regulator any type all as specified and as directed. (Note : Material obtained from item No 128 here in before shall be used)

Material and labour for bell ding dong AC 230 volt single pole all as specified and as directed

Supply and fixing bell push, flush type 6 amps all as specified and as directed.

Supply and fixing sheet metal enclosure for MCCB, DBs, phosphatised, Powder coated , Triple Pole and Neutral (TPN), suitable for 4 way, Double door 415 Volts all as specified and as directed.

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 8 way with dim rail earth and neutral bar all as specified and as directed.

Supply and fixing MCB Four Pole (FP) C curve 10kA breaking capacity of 63 amps, 415 Volts in proper position all as specified and as directed.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.

S&F in proper position MCB Double Pole of capacity up to 40 amps, 240 Volts c-series with 10kA breaking capacity all as specified and as directed.

Supply and fixing indoor luminaire decorative batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 10 W,230 V,50 HZ, slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed.

Supply and fixing indoor luminaire decorative batten for wall/ceiling mounting box type Extruded aluminium housing ,PC Diffuser, energy efficient saving LED BATTEN LIGHT 20W,230 V,50 HZ, slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed.

S&F 10 W LED decorative CITY 3 wall/surface mounting polycarbonate body suitable for retrofit LED Lamp Base B-22 incl lamp ,all as specified and as directed. Make : Havells Cat Part No. LHDL06160099 or equivalent as approved by GE

Supply and fixing LED mirror light fittings 07 W,230 V,50 HZ suitable for indoor and outdoor applications complete all as specified and as directed.

Supply and fixing LED bulk head fittings 10 W,230 V,50 HZ suitable for indoor and outdoor applications complete all as specified and as directed. Make Surya cat no SLE BH 10 W or equivalent of Phillips/Crompton.

Supply and fixing on wall security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clamp etc all as specified and as directed by the Engineer-in-charge.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades for safe custody for reuse and re-assembling the fan complete and refixing the fan in same position including all electrical connection all as specified and as directed.

Material and labour for taking out and removing burnt copper winding, cleaning the armature, rewinding the fan armature for 1200mm sweep fan with new super enamelled copper wire of existing gauge including supply and fixing necessary insulating materials etc and varnishing with approved grade of insulation varnish and heating up and testing all as specified and as directed.

Supply only bearing No.6201/6202 for ceiling /Exhaust fan

Supply only fan condenser upto 2.5 mfd

Material and labour for painting of ceiling fans complete of any sweep/make with one coat of first quality synthetic enamel paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavities with filler materials, and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc2 cm ) complete all as specified and as directed.

S&F Exhaust fan wall mount type 300 mm sweep metal body , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

S&F Exhaust fan wall mount type 250 mm sweep PVC body , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

Taking down existing unserviceable MS box after disconnecting all electric connection and Supply and fixing factory made enclosure box for mounting meter panel of size 0.6x0.6x0.2m indoor and wall mounting type made of 2mm thick MS sheet with front side openable with two nos hinged type door with locking arrangement and danger notice board, dust and vermin proof including providing all necessary electrical connection by supply and fixing single core multi stranded copper conductor FRLS cable of appropriate size, making circular hole for cable entry and exit including cable gland of required size, incl two coat of powder coated paint to out side surface and two coat of synthetic enamel paint to inside surface over a coat of red oxide , and making good the disturbed surfaces or wall etc complete incl necessary nut,bolt, washers for mounting on wall and making provisions for mounting electric meters and MCBs all as specified and as directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for trench of FRLS cable, pipe line etc and getting out in Soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm after laying pipes, cable etc in Soft/loose soil complete all as specified and as directed

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point all as specified and as directed

Material and labour for sand cushioning for protection of underground FRLS cable consolidated and compacted with clean dry sand all as specified and as directed (Compacted thickness shall only be measured and paid)

Supply and lay bricks common burnt clay building bricks sub-class B of size 230x113x75 complete all as directed by Engr-in-Charge.

Drilling of hole horizontally 80/40 mm dia bellow the road for providing casing pipe of cable protection by using mechanical/hand drill

Material and labour for galvanized iron tubing 50 mm bore light grade with all fitting for protection of FRLS cable, laid in trenches/wall/floor incl necessary clamp, bolt/nut if any all as specified and as directed. Note: Excavation ,earth work shall be measured and paid separately

Material and labour for concealed sub main wiring with two run of 4 sqmm PVC insulated unsheathed FLRS copper conductor single core multi stranded and one run of insulated copper earth wire 4 Sqmm drawn through PVC Conduit of suitable size complete. Note :- Copper conductor 3 run of 4 sqmm and one run PVC conduit shall be measured as one length.

Material and labour for concealed sub main wiring with two run of 6 sqmm PVC insulated unsheathed FLRS copper conductor single core multi stranded and one run of insulated copper earth wire 6 Sqmm drawn through PVC Conduit of suitable size complete. Note :- Copper conductor 3 run of 6 sqmm and one run PVC conduit shall be measured as one length.

M & L for Earthing complete with galvanised steel earth plate electrode 60 cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS

N V S S K N SIVA PRASAD

P SRINIVASA RAO