REPAIR OF BOATSWAIN STORE

Amount

Office1

M&L for precast cement concrete block masonry with slid blocks made up of (1:3:6) type C1 (using 20 mm graded store aggregate), masonry not exceeding 10 cm in width and setting in cement mortar(1:4)

M&Lfor use and waste of formwork to sides and soffits of floor or roof beams haunchings, girders, bressummers, lintels, cantilevers, shelves includes supports, overhangs etc, also spays between floors and beams etc. for rough finished surfaces of concrete flat.

M&L for mild steel TMT bars 10mm dia and over , cut to length, bent to shade required, including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9diaorsecuringwithclips

M&L for mild steel TMT bars 6mm to 8mm dia cut to length, bent to shade required, including cranking, bending spirally with and including mild steel wire (annealed) not less then 0.9 mm dia or securing with clips

S&F per-painted zinc coated aluminum sheet (Galvalume) GI based plain steel sheet 0.50 mm thick of any colour having tensils strength of 550 Mpa as in roof covering, cladding to wall, fixed with self tapping screws

M&L for silicon sealant filling.

M&L for rending 15mm thick in CM (1:4) on fare face s of bricks work or concrete, mixed with liquid water proofing admixture finished even and smooth (without using extra cement)

M&L for rendering 15 mm thick in CM(1:6) on fair faces of bricks work or concrete , surfaces finished even and smooth (without using extra cement)

M&Lfor preparationof newly plastered surfaces of walls f any description and applying two coast of walls of any description oil emulsion over a coat of primer

M&Lfor preparation of newly plastered surface of walls of any description and applying two coasts of weather proof antifungal (exterior grade) acrylic emulsion over a coat of primer.

S&F Anodized aluminum window and ventilator frame and shutter , side hung type without sash bar, aluminum sector weighing not less then 0.55 Kg kg/Rmincluding necessary joining cleats , glazing chips , rubber packing, anodized aluminum snap beading, screw anodized aluminum fitting such as peg stays 150mm long (1 no). Hinges type B-21 100mm long (2.no) suitable handle (1. no.)

Supple only 4.0mm thick sheet glass, ordinary quality andglazing with aluminium glazing clips in square exceeding 0.5 sqm in each pane

M&L for reinforced cement concrete (1:1.5:3) as in shelves

M&L for 25 mm thick PCC (1:2:4) as in floor, surface of concrete finished even and smooth using extra cement complete all as specified and as directed.

M&L for dismantling of cladding sheet, shifting of material from store for renovation and back to store after renovation.

M/s Pooja Enterprises

Digital Creations