Remaining works of sardarsinh Rana community hall like door, window etc., at Various Location at Tarsadi, Dist.: - Surat Under Vyavsay vera Grant Year 2025-26.

NAME OF WORK:- Remaining works of sardarsinh rana community hall like door,window etc

LOCATION :- PANDVAI ROAD OPPOSITE SIDE OF BIRSAMUDA GARDEN AT-TARSADI

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(ii) Exceeding

Providing 20mm thick cement plaster in single coat on single or half

brick walls for interior plastering upto floor two level and finished 54.90 203.77 Sq. M.

even and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand)

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or

L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray 29.50 2194.76 Sq. M.

cement slurry including rubbing and polishing complete. (A) Marble

slab 25mm thick

Providing and fixing window having extruded aluminum Colour

Powder Coated section frame main outer size 95mm x 24mm x

1.17mm @ wt.of 0.738 Kg/mt, horizontal Three track member size

92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt, vertical member of

size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with sliding

shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @

wt.of 0.456Kg/mt with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws.

(A) Plain grill

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning, oil,grease,

dirt and other foreign matter and scoured with brushes fine steel 30.40 36.42 Sq. M.

wood, scrapers and sand paper with ready mixed priming paint

brushing red lead.

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter.

Item No. & Description Quantity Rate Per Amount

Providing and fixing 35 mm thick shutters for Doors, windows and

clearstory windows including blackenamelled M.S. butt hinges with 15.60 3773.84 Sq. M.

necessary screws. (A) Indian teak wood. (i) Fully Panelled.

Provoding and fixing flush door shutters, solid core construction with

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2) 35 mm

Providing and fixing FRP frame size 125x65 mm and 35mm thick

FRP shutter with wood grain raised panneled design finish shutter

having extra reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected polyurethene

foam done in situ alongwith embedded wooden pieces for stiffening 6.30 2019.98 Sq. M.

& also taking hinges & fintures. The whole FRP frame & shutter is to

be water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with fastener

sleeve & alluminium fixtures & fastenings.

Total Amounts Rs ...………........

Total Amounts Rs ...………........

I/We am/are willing to carry out the work @ ________% Above / Below__________Percentage (should be writen

in figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs.3,48,389=00 Put to Tender Rs.3,48,389=00

Add % Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Tarsadi Nagarpalika

Chief Officer President

Tarsadi Nagarpalika Tarsadi Nagarpalika

Tarsadi Tarsadi