Sabarimala Devaswom- M M festival in 1196ME- Repair and replacement of damaged electrical accessories in the existing electrical installation to the temple structures and various buildings at Sabarimala

Amount

Appendix I Supply of Electrical materials at Sabarimala. 20mm dia ISI marked ,PVC conduit

1.5 sq mm ISI marked FRLS PVC insulated single core copper conductor cable

2.5 sq mm ISI marked FRLS PVC insulated single core copper conductor cable

4.00 sq mm ISI marked FRLS PVC insulated single core copper conductor cable

6.00 sq mm ISI marked FRLS PVC insulated single core copper conductor cable

10 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable conductor cable

S.P. 5/6 amps,one way switch, piano type ISI marked

bell push ,piano type

3 pin 5/6 amps socket outlet, piano type ISI marked

6 pin 15/16& 5/6 amps socket outlet, piano type ISI marked

Ceiling rose, 3 pin 5 A ISI mark

S.P. 5/6 amps, one way modular switch, ISI marked

3 pin 5/6 amps modular socket outlet, ISI marked

6 amps. to 32 amps. ratings, SP MCB, C curve,10KVA breaking capacity.

40 amps., 2 pole isolator

40 amps., 4 pole isolator

100 amps., 4 pole isolator

40 amps. rating, 2 pole RCCB, 100mA/300mA

40 amps. rating, 4 pole RCCB, 100mA/300mA

63 amps. rating, 4 pole RCCB,100mA/300mA each

20 mm PVC bends

20 mm PVC couplers

20 mm PVC junction box, one way

20 mm PVC junction box, two way

6 pin 15/16 A modular socket outlet, ISI marked

Stepped type Modular Fan regulator (2 module)

Modular base & cover plate for 2 module

Modular base & cover plate for 3 module

Modular base & cover plate for 4 module

Modular base & cover plate for 6 module

Modular base & cover plate for 8 module

Modular base & cover plate for 12 module

Modular blanking plate

Brass pendant holder

PVC Batten/ Angle Holder

Single pole, blanking plate each

63 A, 2 pole isolator each

63 A, 4 pole isolator each

6 way, SPN, double door, MCB DB

8 way (4+24), TPN, vertical type, MCB DB, double door

Normal size 8W BC/ ES(LED)

Normal size 14 W BC/ ES(LED)

Normal size 15 W BC/ ES(CFL)

T8 36 W FTL

1200mm,LED Tube

2x20 W LED box type tube fittings. The fittings shall be made from CRCA MS sheet of minimum thickness 0.50 mm nominal thickness inside & outside (including LED Tubes).

1x20 W LED box type tube fittings. The fittings shall be made from CRCA MS sheet of minimum thickness 0.50 mm nominal thickness inside & outside (including LED Tubes).

2.5 mfd. Capacitor

6 A 3 pin plug top

16 A 3 pin plug top

40 A TP MCB isolator

63 A TP MCB isolator

2 module Moulded Plastic boxes

3 module Moulded Plastic boxes

4 module Moulded plastic boxes

6 module Moulded Plastic boxes

8 module Moulded Plastic boxes

Copper wire 0 to 14 SWG

1200 mm sweep- 5 star rated Ceiling fan, complete with 300mm down rod, canopies, shackles and blades and resistance type regulator working on 230/240V single phase A/C . (White 6 Nos)

400 mm sweep Wall Mounting fan

300/305 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C

450 mm sweep, 1400 rpm Heavy Duty Exhaust fan working on 230 V A/C

250 mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230V single phase A/C

1.0sqmm ISI marked FR LS PVC insulated single core copper conductor cable

adhesive pvc insulation tape

pvc grip

PVC Round block

48/0.20 sqmm three core ISI Marked FR LS PVC sheathed round copper conductor cable

80/0.20 mm sqmm three core ISI Marked FR LS PVC sheathed round copper conductor cable

120W LED Flood light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

70W LED Flood light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

70W LED Street light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

100W LED Street light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

Supplying GLS 60W clear bulb in the existing fitting as required

Supplying and 40W FT starter in the existing fitting as required(FSU-Bajaj)

Supplying and providing 1*36/40W copper ballast in the existing fitting as required(VPIT) (Bajaj/Crompton)

Supplying and providing 1*36/40W with electronic ballast in the existing fitting as required. 40W ELE CHOKE E-SAVER

Supply and providing resistance type regulator for 1200mm sweep ceiling fan and giving connection as required

Supply Aluminium Flat Wire 2.5 SERVICE WIRE

Supply Aluminium Flat Wire 4MM SERVICE WIRE

Supply MH LAMP 250W TUBULAR

supply 250W MH CHOKE BJOS

Supply 250W SV IGNATOR

Supply 33 MFD CAPACITOR

Supply conveyance installation testing and commissioning of prewired Strip light fluresent made out of CRCA sheet of minimum thickness 0.50mm power coated/store enameled suitable for 1x36x40w FTL with open construction (VPIT) copper chock starter holder lamp holder etc duly wired up to for use on 240V single phase AC supply and fluresent lamp etc directly on wall or ceiling with TW round block neatly painted to suit the fittings and giving connection with required length of 16/0.20mm 3core copper conductor flex confirming to relevant ISS and giving connection etc as required

Supply PEDESTAL FAN 07 MIDEA 400MM

Supply LED BULB .5W HAPPY POWER 1Y

APPENDIX-II Labour engaged for watching and maintenance to the existing electrical installation to the temple structures, various buildings and yard light installed in and around at Sabarimala. Dismantling and removing the damaged accessories from the existing electrical installations and also stacking carefully. Electrician

wire man helper

5nos of electricians should be engaged round the clock for fault attending around the temple premises and various locations including trekking paths, Pandithavalam etc. as per the directions of departmental officials at site (2 shift / day) for 80 days during the period from 01.11.2020 to 19.01.2021 5nos of Electrician /Day for 80days

Labor engaged for controlling the electrical installation along the trucking path ( Q complex etc…) 2nos electrician per day for 68 days during the period from 13.11.2020 to 19.01.2021. (2 shift/day)

Labor engaged for engaging store keeper 2nos electrician per day for 68 days during the period from 13.11.2020 to 19.01.2021.

D SURESH