151/24-25 ,PANDALAM MUNICIPALITY-MINI MCF

Amount

Mini MCF

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD484084/2024-2025:Supplying and fixing wire mesh using 35x35x2.7mm size over existing frame including one coat of steel primer and all cost of conveyance etc complete

OD484083/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)

OD484085/2024-2025:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications excluding priming coat, preparation of surface, etc. complete.On steel work. (over existing prime coat)-Modified 13.52.1

OD484082/2024-2025:Steel fabricated name board 90 cm x 60 cm. Providing and fixing informative name board fixed in steel frame and written over GI sheeting 0.80 mm thick- including painting with approved paint and including the cost of lettering as per drawings.

K N Prasannakumar (BID ID -2193043)

STEEL INDUSTRIALS KERALA LIMITED (BID ID -2188187)

RAJESH A BHASKAR (BID ID -2192191)

JITHIN VARGHESE (BID ID -2191927)

Bidder Name

STEEL INDUSTRIALS KERALA LIMITED

AKARSHKUMAR P

K N Prasannakumar

JITHIN VARGHESE

RAJESH A BHASKAR