Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.4 LAccepted-AOC INDEX NO E 1504 HQ CWE DEHRADUN 63 RAJA ROAD DEHRADUN | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹39.7 L+₹5.2 L (15.1%)Rejected-AOC WING NO 7 2 10 PREMNAGAR DEHRADUN UK | L2 | Rejected-AOC R | |
| 3 | L3₹39.9 L+₹5.4 L (15.6%)Rejected-AOC VIII BADWALA ARKEDIA GRANT PO PREMNAGAR DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L3 | Rejected-AOC R | |
| 4 | L4₹40.7 L+₹6.2 L (17.8%)Rejected-AOC 1 259 CHUKKUWALA DEHRADUN UK | DEHRADUN | DEHRADUN | UTTARAKHAND | L4 | Rejected-AOC R | |
| 5 | L5₹42.6 L+₹8.1 L (23.6%)Rejected-AOC 79B MIG PHASE 1 INDIRA PURAM G M S ROAD DEHRADUN UK PIN 248171 | DEHRADUN | UTTARAKHAND | 248171 | L5 | Rejected-AOC R |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
4 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA DEHRADUN
GE IMA DEHRADUN
COMPREHENSIVE REPAIR MAINT IN KINGSLEY COLLINS BLOCK
2022_MES_524143_1
GE/IMA/T-27/2022-23 9205/E8
Open Tender
Support/Maintenance Service
Item Rate
60 days
GE IMA DEHRADUN
Refer NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA DEHRADUN
₹90,000
Yes
23 Jul 2022
14 May 2022
6 Jun 2022
14 May 2022
4 Jun 2022
21 May 2022
60 days
Amount
Demolition of brick work or stone masonry built in cement mortar incl all quoins arches pillars but excluding ashlar facing ,dressing stone work nd pricast concrete articals etc completed all specified and directed .
M&L brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 mtr mean radius built in CM(1:6). completed all specified and directed .
M&L brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4.completed all specified and directed.
Demolition of cement concrete ground floor and paving not exceeding 15cm thick below or above ground level completed all specified and directed.
M&L for 75 mm thick cement concrete type C-2 1:3:6 (40 mm graded aggregate as in sub base completed all specified and directed .
M&L cement concrete type C-2 (1:3:6) 75 mm thick as in plinth protection surface finished even and smooth completed all specified and directed .
M&L for 100 mm thick cement concrete, type B-1 (1:2:4) (using 20mm graded crushed stone aggregate), as in hard standing incl finshing the surface by brooming complete all as specified.
S&F chequered coloured rubberised cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in cement slurry in floors with cement pigment incl and over 15mm thick screed bed or bedding layer of CM 1:4 set and jointed in neat cement slurry and pointed in grey cement or colored pigment to match the surface of tiles finish complete all as specified.
M&L for granite (of any type) 20mm thick mechine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment o match the shade of granite stone incl. grinding and polishing complete all as specified and directed.
M&L Udaipur green marble work, of any shade other than white and black, 18 to 20 mm thick as in cooking platform, over 20 mm thick cement screed base laid and jointed in grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing & rounding of edges complete all as specified and directed
Dismantling of Stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar compelte all as spd and directed.
Rounded to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete in all respect and as directed by Engr-in-charge.completed all specified and directed .
S&F machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slury mixed with pigment to match the shade of the slab incluiding rubbing and polishing complete all as specified and directed by Engineer –in-Charge.completed all specified and directed .
M&L machine cut kota stone slab mirrior polished 20-22mm th as in skirting/dado over 10mm th screed base & jointed with grey cement slurry mixed with pigment to match the shade.completed all specified and directed .
M&L for Vitrified Ceramic jointless tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. Over 15 mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface.completed all specified and directed .
M/L vitrified ceramic coloured tiles 10 (square/ rect) polished,, area of each tiles not exc 0.36 sqm inverticle surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick screed bed in CM 1:4. completed all specified and directed .
M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick ( Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc.incl and over 15mm thick screed bed or bedding layer of CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles finish complete all as specified.
M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.06 Sqm but n.exc. 0.11 Sqm in floors etc. over 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles.completed all specified and directed .
M&L glazed ceramic coloured tiles (300x450)x7mm thick as in vertical surfaces including 10 mm thick rendering in CM 1:3 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles. completed all specified and directed .
M&L for 25 mm thick cement concrete type B-1 1:2;4 (20 mm graded aggregate as in sub base completed all specified and directed .
Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing and removing rubbish off the premises complete all as specified as specified and directed
Taking down cement or cement lime plaster of any description from brick or stone wall etc incl racking out of joints , hacking for key anf scrubing down with water etc completed all specified and directed .
M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) surface finished fair and even all as specified..
M&L rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:4 finishing surface fair and even upto the height of 7.5 m complete all as specified all as specified.
M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer completed all specified and directed.
M&L preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of cement primer completed all specified and directed.
M&L preparation of new plastered surfaces & providing two coats of distemper oil emulsion over a coat of primer completed all specified and directed .
M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described F112 completed all specified and directed .
M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer completed all specified and directed .
Taking down shutters only of size exc.1 sqm and nexc 2 sqm each completed all specified and directed .
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each completed all specified and directed .
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm and n.exc 4.00 Sqm each completed all specified and directed .
S & F Steel windows box type with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded incl cutting holes in wall for inserting holdfast and making good to the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required completed all specified and directed .
S & F Steel windows box type with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded incl cutting holes in wall for inserting holdfast and making good to the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required completed all specified and directed .
Steel ventilators box type with centre hung shutter including hinges, steel peg stay, complete completed all specified and directed .
S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated completed all specified and directed .
S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats completed all specified and directed .
S&F 30 mm thick flush shutter solid core construction with partical board core and plywood face panels commercial type on both sides complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either zixs as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing completed all specified and directed .
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS Square tube completed all specified and directed .
S&F 2nd class hard wood plain solid straight chowkats & frame wrought rounded or chamfered put together with glue pinned at joints and fixed.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gd E-165) completed all specified and directed.
S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm.
S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed (ISI Marked) completed all specified and directed .
S&F 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy (ISI Marked) completed all specified and directed .
S&F extruded aluminium alloy handles, fabricated type, anodized of size 150 mm (ISI Marked) completed all specified and directed.
S&F 300 mm, mild steel, ordinary helicalsprings including roller and roller plate completed all specified and directed .
Dismantling wrought iron or mild steel work of any description completed all specified and directed.
S&F 0.56 mm dia of wire gauge and average width of apperture 1.18 mm all as specified.
Hacking out old broken glass (any thcikness size, quality or descritpion) from wooden frame or steel frame glazed with putty or fixed with beads exc 1.5 sqm. completed all specified and directed .
S&F 3mm thick sheet glass, ordinary quality in square not exceeding 0.50sqm each pane glazed with oil putty or fixed with wooden beads completed all specified and directed.
Taking up or down steel tubing and connection incl cleaning for refixing 15 mm dia bore completed all specified and directed.
Taking up or down steel tubing and connection incl cleaning for refixing 20 mm dia bore completed all specified and directed.
S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore completed all specified and directed .
S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore completed all specified and directed .
S&F 500 Ltr rotational moulded polyethylane water storage tank (cylinderial vertical with closed top) hoisted and fixed in position all as specified in SSR Part I in repair including dismantling of old tank completed all specified and directed .
S&F 1000 Ltr rotational moulded polyethylane water storage tank (cylinderial vertical with closed top) hoisted and fixed in position all as specified in SSR Part I in repair including dismantling of old tank completed all specified and directed .
S&F of Structural steel, rolled section as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-410 W (Gde-E-250)all as specified and directed by Engineer-in-Charge
Dismantling of corrugated AC/fibre/GI sheet any pattern in roof incl ridge complete all as specified and directed.
S & F 0.63 mm thick Plain galvanised,mild steel sheeting in ridges, hips, valley gutter all as specified with grade of zinc coating 275
S & F glavnised corrugated mild steel seathing 0.63 mm thick with two corrugation side lab fixed with coatch screw and washer in roof, wall etc.
S & F 6mm thick asbestos cement corrugated or semi corrugated sheet in roofs fixed with L of J type bolt. completed all specified and directed .
S& F Pre- painted galvalume aluminum zinc coating GI based tile profile corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified having cap with rubber and metal washer complete all as specified and directed.
S& F Pre- painted galvalume aluminum zinc coating GI corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified having cap with rubber and metal washer complete all as specified and directed.
S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified having cap with rubber and metal washer complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section in any position in framed work.completed all specified and directed.
M&L Second class hard wood clean swan timber fixed in scantling completed all specified and directed .
S & F in repair 4 mm thick E-board false ceiling (Classic) including anodised aluminium snap grid frame for false ceiling, size of grid 605 X 605 mm fixed with 4 mm dia GI wire suspenders one end tied toroof members and other endconnected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres all as specified and as directed by Engineer-in charge (size of main tee 36.5 mmX25 mmX 1.4 mm, cross tee 23.5 mm X 26.4 mm X 1.4 mm angle along walls 40 mm X 25 mm X 2.0 mm) all as specified and directed.
S&F vitreous china, orrisa pattern water closet seat of size 580mm x 440mm white with and incl 'P' or 'S' trap and provision of lime concrete bedding in repairs.completed all specified and directed .
S&F vitreous china wash down water closet pan (pedestal pattern) white incl seat cover of plastic, CP jet and pipe etc complete incl necssary PVC pipe fittings in repairs. completed all specified and directed.
S&F in repair vitreous china WHB white, flat back, size 550 x 400mm including brackets, 32mm Brass CP waste fitting, PVC waste pipe & 450mm connection.
S&F in Pillar taps, cast copper alloy, 15 mm dia with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.completed all specified and directed .
S&F in repair 15mm bore long body bib tap Chromium plated with wall flenge.completed all specified and directed .
Stop valves of cast copper alloy, fancy type 15mm bore, screwed down, high pressure with crutch or butter fly handle, fixed in repairs complete all as specified.
S&F CP grating 100mm dia with hole for waster.complete all as specified.
S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including flush pipe of CP brass suitable for IWC/EWC, 10 Lit capacity completed all specified and directed .
M & L for machine pressed coloured rubberised precast concrete interlocking paver block any shape and size conforming to IS -15658 - 2006 of 60 mm thickness, M-35 Grde set, jointed and pointed in neat cement slurry in floors with cement pigment completed all specified and directed.
M&L for 20 mm thick Sand cushion layer under paver block etc complete all as spd. completed all specified and directed.
S&F stainless steel curtain rod 25mm dia, decorative finish at both ends, including dismantling of existing rod etc. completed all specified and directed .
S&F in repairs decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod or as directed by Engineer-in-Charge.completed all specified and directed .
Complete removal of existing treatment on walls and applying two coats of distemper oil emulsion of any tint over a coat of primer and wall putty, smooth finished complete all as specified and directed.
Taking down existing roof treatment from the RCC slab, cleaning off all foreign material by wire brushing clenaing off surfce including demolition of cement concrete (Unreinforced) over Roofs of any thickness and removal of spoil to a distance n ec 500 mtr complete all as directed.
M&L for Providing cement concrete type C-1 1:3:6 (using 20 mm graded aggregate as in coping .completed all specified and directed .
M&L for providing cement concrete in roof kerbs or mud stops, rounded or chamfered as in type B0 1:2:4 (12.5 mm graded aggregate).completed all specified and directed .
M&L 10 mm thick screed bed in CM (1:4) over concrete surface finished even & smooth with out extra cement with water proofing compound @ 3 % by weight of cement or as per manufacturer instructions while the concrete is green ( WPC shall be paid separately)
Supply only water proofing compound. completed all specified and directed.
M&L a coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying on coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer ploymeric membrane 3mm thick, minimum wt 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) manufactured by authorrised manufacturer specified in particular specification laid as per the manufacturer instruction with side over lap of 75 mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required & finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm complete all as specified including taking down existing roof treatment from the RCC slab, cleaning off all foreign material by wire brushing clenaing off surfce and removal of spoil to a distance n ec 500 mtr complete all as directed.
M&L for repair by dismantlig of existing wooden floor and provide new HDF laminate wooden flooring of 10 to14 mm thick over 2 mm thick Foam sheet over a layer of polythene film sheet over and including wooden fillets of size exc 16 sqcm but n n 25 sqcm and all necessary fixtures to match with existing floor level and finished top finished floor. completed all specified and directed.
M&L for cleaning and preparation of existing treated surface of tennis court and providing two layers of acrylic synthetic paint over two layers of acrylic synthetic dense cushion including removal of old existing layers complete all as spd, directed and as approved. completed all specified and directed.
M&L preparation of old polished wooden surfaces of any description over 10cm width or girth and applying one coat of manson polish complete all as specified.
S&F Aluminium Anodized powder coated aluminium frame for doors , windows, ventilators, partion wall with one or more rebates including joining cleat for fixing etc completet all as specified. (thikness of powder coating is 40 micron)
S&F anodised aluminium powder coated door shutters, aluminium sections weighing 0.55 kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, sliding door bolt and mortice lock aluminium snap beading screws complete all as specified.
S&F anodised aluminium window and ventilator shutter side hung type without sashbar, aluminium sections weighing 0.55 kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified.
S&F double action floor spring hydraulically regulated made up of of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed. completed all specified and directed.
S&F 5.5 mm thick froasted glass panes and glazing with oil putty or fix in aluminium door / widnow complete all as specified.
M&L for Fully Vitrified pocelain with Tac Button Profile tile of ivory solid through colour of size 30 cm x 30 cm x 25 mm thick set jointed and pointed in near cement slurry in floors with white cement and pigments over ad incl screed bed or bedding layer or mortar 15 mm thick in CM 1:3 for laying floors finishes compete.
S&F in repairs for GI frame work for ceiling or on vertical wall comprising of GI perimteter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and wb of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermiediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fastener with and incldiing ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web and 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre completed all specified and directed .
S&F in repairs for 16 mm perforated particle board / tiles for insulation and accoustic purpose size n exc 1.00 sqm fixed with nails to GI frame work or with staples on snap grid including preparation of newly surface over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of primer completed all specified and directed.
M&L for application of Ist coat including preparation of existing black top road surface by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the plain surface with gunny bags or air compressor and to remove all loose dirt and applying one coat of black road marking paint (water based) spraying with mechanical mean complete all as specifed and directed.
M&L for application of 2nd coat after two days of ist coat (given in ITEM NO-1 ) AND PREPRATION OF existing of black top road surface by brushing with wire brushing for removing cacked mud etc sweeping with brooms and finally fanning the plain surface with gunny bags or air compressor and to remove all loose dirt and applying one coat of black road marking paint (water based) spraying with mechanical mean complete all as spd and directed.
M&L for cleaning and preparation of road surfaces and applying two coat Weather proof apex paint as in lines, dashes, arrows etc for road marking all as per manufacturer instruction complete all as spd and directed.
M&L preparation of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified.
M&L for preparation of old plastered or brick masonry surfaces of wall, corrugated AC sheet roofing and applying one coat of cement base paint (snowcem) complete all as specified.
M&L for washing down and stopping of plastered or brick masonry surfaces of wall, corrugated AC sheet roofing by complete removal of existing treatment and applying two coats of cement base paint (snowcem) over a coat of primer complete all as specified.
M&L for preparation of old painted plastered surfaces of walls, pillars and applying one coat of synthetic enamel paint completed all specified and directed .
M&L for preparation of old painted wooden surfaces over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of old painted steel surfaces including roof sheet etc exc 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified.
M&L preparation of old polished wooden surfaces of any description over 10cm width or girth and applying one coat of manson polish complete all as specified.
M&L for preparation of existing old surface of any type and apply one coat of weather coat exterior apex wih execellent flexibility and thixotropic nature to be use on vertical as well as horizontal surface completed all as per manufacturer instruction. completed all specified and directed .
Attending complant for building works ( complant) related to (carpenter and plumber) work by deploying one carpenter and one plumber for full day , this includnes minor repeir to door , replacement of glass pans, tighting of wires cloth , oil putty , bow handle , tower bolt , sliding bolt etc of any other material shall be paid separatly as supply only. NOTE:- 1. Replacement of glass pans , tower bolts oil putty, wire clothes sliding bolt , tower bolt, shell be paid sepratly as supply only under relvant items of BOQ. 2. Replacment of tab,repair water pipe leakage,IWC Replacement ,EWC Replacement, WHB and stop cock,water tank fitting flot valve etc. 3. Contractor has to obtain completion of a complant form user duly signed with date by the user with building nbr and summited the same to JE / Engineer -in - Charge
M/S S P BUILDERS
Aggrawal Builders and Furnishers
Sharda Enterprises
ACE BUILDERS AND CONTRACTORS
M/S PUNDIR BUILDERS
JAIN BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .