CERTAIN JOINERY REPAIRS TO MARRIED ACCN C1 SECTOR IN AOR OF AGE B R II UNDER GE (SOUTH) AMBALA CANTT

Amount

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area not exceeding 1.5 Sqm each and removal from site including iron mongry hold fasts etc., complete all as specified.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as specified.

Taking down shutter of any descritption exc 1.00 sqm each but not exc 2.00 sqm each including removal from site, complete all as specified.

Material and labour for steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable complete inclusive of guared bars 12mm square bar including taking down old unserviceable windows, complete all as specified. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery (iii) Glazing, wire mesh & painting grill shall be measured & paid for separately.

Supply and fixing Steel windows or ventilators, fixed type, with glazing bars all as specified and directed.

Supply and fixing (in repair) partly glazed aluminium alloy anodized (powder-coated) partition (Area of each panel not exceeding 1.5 Sqm each) with frame of size not less than 100 mm x 44.4 mm x 2 mm including packing with rubber gasket, standard aluminium beading around both sides including 6mm thick plain coloured bakelite sheet or acrylic boards, prelaminated both side with one side decorative choice lamination for fixing in bottom panel of aluminium partition as required complete all as specified and directed. Notes :- 1. Glass pane shall be measured and paid separately.

Supply and fixing (in repair) aluminium alloy anodized (powder-coated) door frame and partly glazed shutters with hollow aluminium anodized sections including 6mm thick plain coloured bakelite sheet or acrylic boards, prelaminated both side with one side decorative choice lamination for fixing in bottom panel as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip, jointing cleats, rubber packing, gasket, dead lock 4 levers, 02 Nos aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members etc. with rawl plugs complete all as specified and directed. Sections of frame and door shall be as follows : - (a) Door Frame single groove 101.6 mm x 44.45 mm x 2.15mm thick (b) Shutter top 47.62 mm x 44.45 mm x1.95 mm thick. (c) Shutter bottom 114.30 mm x 44.45 mm x 2.1 5mm thick. (d) Shutter vertical 85 mm x 44.45 mm x 1.80 mm thick. (e) Shutter middle 83.5 mm x 44.45 mm x 2.40mm thick. (f) Gauging clip weighing not less than 0.097kg/metre. Notes :- 1. Glass pane shall be measured and paid separately.

Supply and fixing (in repair) aluminium alloy anodized (powder-coated) window frame with double shutters open able type, with aluminium sections as specified for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, stainless steel hooks and eyes, aluminium anodized barrel tower bolts, glazing clips, joint cleats, rubber packing, gaskets etc for series-B “ Jindal” section numbers for casement window.complete all as specified and directed comprising of followings :- (a)Frame of section 101.6mm x 44.45mm x 2.10 mm thick and section for shutter 47.62 mm x 44.45 mm x1.95 mm thick. (b) Mullion 53 mm x 52 mm x 2 mm thick not less than 1.065 kg/mertre. (c) Glazing clip weighing 0.259kg/mtr. (d) Window shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98 mm and thickness 2.37mm weighing 0.875kg/mtr and 01 no for each open able leaf. Notes :- 1. Glass pane shall be measured and paid separately.

Supply, fabricate and fixing in repair position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 5.5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below,including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mentioned in relevent Appx

Supply and fixing 5.5 mm thick tinted glass in square exc 0.5 sqm in each pane with heat reflecting properties , fixed to aluminium frame with glazing clips, etc., complete all as specified and as directed.

Supply and fixing in repair powder coated anodised aluminium grill made of mesh size 100x100mm of bar 8mm dia using U channel 25x12mm fixed to aluminium frame work complete all as specified and as directed.

Supply and fixing 3mm Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each and glazing with beads fixed with metal panel pins all as specified and directed

Supply and fixed Pressed steel frames for doors of size 165mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, supplied and fixed

Supply and fixed Pressed steel frames for doors of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, supplied and fixed

Material and Labour IInd class hardwood factory made 30mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fixed to chowkhat complete all as specified and directed by Engineer-in-Charge at site.

Supply and fixing for galvanized mild steel wire cloth with 0.63mm nominal dia of wire and average width of aperture 1.40mm fixed with finned tacks or galvanized wire staple complete all as specified.

Supply and fixing for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides completeface is covered with decorative face veneer with lipping/frame to match all as specified.

Supply and fixing factory made 35mm thick 2nd class hardwood plain frame paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rails stile as per I:S:1003 (Part I) kiln seasoned and chemically treated.

Supply and fixing 250 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified.

Material and labour for preparing new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint(first quality) over a coat of primer complete all as specified and directed

Materila and labour for painting surfaces of wood (new) for any description not otherwise described over 10cm width of girth by applying two coats, of synthetic enamel paint over a coat of wood primer including preparation complete all as specified.

Supply and fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified.

Supply and fixing Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face including fixing in frame at site with 03 Nos SS hinges, 02 Nos aluminium tower bolt 200 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B-1, (using 20mm graded mechanically crushed stone aggregate) as in bed blocks for hold fasts, complete all as specified.

Supply and fixing of kitchen cabinet in required sizes at site made out of 18mm thick lead free PVC celuka ply one side lamination and other side balancing lamination sheet, sheet and provn of shutter make out of 18mm thick one side decorative laminated pvc sheet all all required brackets 5.5 screws etc the panel shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2mm thick edge bending tape or 90 degree edge bent fininsh as per make specification complete including taking existing cabinet of any type & any description complete all as specified and as directed.

Supply and fixing Plain fillets second class hardwood .square,rectangular or triangular in section ,Exc 6 & n exc 13 sq cm clean sawn, secured with nails or brads.

Supply and fixing Plain fillets second class hardwood .square,rectangular or triangular in section n exc 3 sq cm bullnosed, splayed, chamfered or rounded on oneedge or face all as specified and directed

Supply and fixing continuous (Piano) hinges mild steel, bright finish or electro galvanised, width of flap 30mm completed as specified and directed.

Supply and fixing 100mm long hasp & staple, safety type, alu anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws completed as specified and directed.

Supply and fixing 100mm long Aluminium handles, cast type,anodised completed as specified and directed.

Supply and fixing Aluminium alloy, anodised, sliding door bolt, 250mm long, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia including fixing bolts and nuts as in repairs

Supply and fixing mild steel butt hinges of 100mm length, cold rolled, medium weight, ISI marked complete all as specified.

Supply and fixing 75mm Butt hinges, heavy weight, cold rolled mild steel, and fixed as in repairs completed as specified and directed.

Supply and fixing 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed as in repairs completed as specified and directed.

Supply and fixing for Aluminium anodised, 200mm long barrel tower bolts of extruded section and fixed complete all as specified.

Supply and as in repairs for Aluminium anodised, 200mm long barrel tower bolts of extruded section and fixed complete all as specified.

Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

Supply and fixing 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified.

Supply and fixing any Continuous (piano) hinge, mild steel, bright finish, ISI marked, (width of flap 40mm when open) as in repairs complete all as specified.

Supply and fixing in repair 125mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified.

Supply and fixing Mild Steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete as in repairs complete all as specified.

Supply and fixing 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete if fixed to steel/ concrete chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete as inrepairs complete all as specified.

Supply and fixing150mm size Extruded aluminium alloy handles, fabricated type, anodised as in repairs complete all as specified.

Supply and fixing in repair mild steel 25 mm tubular rod in plumet rod, 1.6mm fancy type including golden colour brakets,latto and wall to wall socket etc complete all as specified and as directed by engineer-in-charge.

Supply and fixing 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor as in repairs complete all as specified.

Supply and fixing as in repairs Aluminium extruded section body, Door closer hydraulically regulated, universal type, suitable for door shutters 851 to 1000mm in width all as directed and specified

Supply and fixing as in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

Repair related to welding repair works such as repair to grills, guard bars, steel windows and steel door etc., by deploying Welder and helper for welding of n exc 6mm thick and n exc 2.5cm in lenth all as specified and directed.

Repair related to welding repair works such as repair to grills, guard bars, steel windows and steel door etc., by deploying Welder and helper for welding of exc 6mm and n excc 9 mm thick and exc2.5cm and n exc 5.0cm in lenth all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

All as per item No 50.00 here in before from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.

Supply and fixing Sheet glass, 3mm ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

Supply and fixing Sheet glass, 3mm ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and sheet glass is ground or obscured or frosted, on one side complete all as specified.

Supply and fixing Sheet glass, 3mm ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified.

Resecuring chowkhat or frame without taking down Chowkhats or frames not exc. 1.5 sq. m each complete all as specified.

Resecuring without taking down Chowkhats or frames exc. 1.5 sq. m and n exc 4.0 sqm each complete all as specified.

Resecuring or easing & adjusting shutters of description wooden/steel n exc 1.00 sqm each complete all as specified.

Resecuring or easing & adjusting shutters of description wooden/steel exc 1.00 sqm n exc 2.0 sqm each complete all as specified.

Supply and Fixing in repairs for stainless steel plate rack standard size 900mmx600mm x 200mm complete and fixing with rawl plug and steel screws of wt not less than 5 kg each, complete, all as specified and as directed.

Supply and fixing of 5 mm thick plain colour PVC sheet hollow interlocking wall panelling of width 250 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC 'U' and 'L' beading at corner and end portion where ever required of matching colour including taking down of existing wall lining, board or insulation board/panelling including cover fillets of any type and thick complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.

Supply and fixing of 5 mm thick plain colour PVC sheet, solid PVC wall paneling/ lining PVC sheet inclusive of solvent cement and fixing at site with and including 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and directed including taking down of existing wall lining, board or insulation board including cover fillets of any type and thick complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed. Note : Material test certificate and authentication should be provided by the manufacturing company.

Supply and fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa tensile strength as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer etc complete including dismantling asbestos cement corrugated or semi-corrugated sheets etc; complete all as specified and as directed.

Supply and fixing of pre-painted galvalume aluminium zinc coating GI based galvanised plain mild steel sheeting 0.50 mm thick of any colour, having 550 Mpa tensile strength as in roof covering/ ridges and fixed with self tapping screws or J type hooks including rubber washer etc complete including dismantling asbestos cement corrugated or semi-corrugated sheets etc; complete all as specified and as directed.

Supply and fixing of rolled mild steel in roof trusses (framed), trussed rafter/purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position, conforming to Fe-410-W (Gde 250), complete all as specified and as directed.

Material and Labour PCC type B-1 1:2:4 (using 20 mm graded aggregate) as in kerbs of mud stops, rounded or chamfered on edges , etc complete all as specified and directed

Demolition of brick work built in cement mortar including all quoins pillars etc complete all as specified .

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, with necessary scaffolding etc complete all as specified and directed.

Description all as per item No. 67.00 above but except bricks including cleaning, removing mortar from the bricks complete all as spd in CM 1:6 with necessary scaffolding etc complete all as spd and directed

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 all as specified and directed

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including dado any description complete all as specified.

Material and Labour for 15 mm thick rendering on faces of brick or concrete surfaces in CM 1:4 . finishing the surface even and smooth without using extra cement.complete all as specified.

Material and Labour for rendering 15mm thick in 1:6 CM on fair faces of brick work or concrete surfaces of walls. Fair and even complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified.

Material and Labour for preparation of new plastered surfaces of any description not other wise described over 10 cm width or girth and applying two coats of cement base paint on wall etc.complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable tiles and rubbish outside MOD land etc., complete all as specified and directed.

Material and Labour joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting incl. 10mm thk backing coat in CM 1:4 of floor finishes complete all as specified.

Material and Labour Renewing tiles in patches,(Glazes Tiles) area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete.

Supply and fixing of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 475 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed. Note : Material test certificate and authentication should be provided by the manufacturing company.

Supply and fixing of PVC false ceiling consisting of 600 mm x 600 mm, 5mm (+ 0.25) thick plain embossed PVC sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1" x 1" (25 mm x 25 mm, 1 mm thick) in square pattern of grid sizes of 2' x 2' (600 mm x 600 mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 4mm MS rods of required sizes to maintain proper level etc. The aluminium frame work is supported on the side wall with the use of aliminium L- Section of size 1"X1" (25mmX25mm, 1mm thick) Angles etc. complete as per direction of Engineer - In- Charge, Manufacturer's specification and drawing including taking down existing ceiling boards (fibre, pulp, insulation etc) or insulation boards/slab etc ant thickness including cover fillets of any description complete all as specified and directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc and making good to match with existing surface effected for this area etc complete all as specified and directed. Note : Material test certificate and authentication should be provided by the manufacturing company.

Resecurig /adjusting existing false ceiling grid any type and making reqd tightening to remove sag portion/depression in false ceiling grid including replacement of missing sections/suspenders tec complete all as specified and directed.

Supply and Fixing pegs set of 6 Nos, power coated GI fixed with cadmium plated screws as as in repairs complete all as specified.

Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant, complete all as specified and directed by Engineer-in-Charge. Note: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant , complete all as specified and directed by Engineer-in-Charge. Note: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid plain decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC door to be laminated with PVC foil of Min 14 Microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing all as per specification and drawingscomplete all as specified and as directed

Supply and fixing of providing 30 mm thick factory made 100% Solid WPC (Wood polymer Composite) gauzed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ),alcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws incl Aluminum Jali and Stainless wiremess as per required. complete all as specified and directed. WPC door to be laminated with PVC foil of Min 14 Microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing all as per specification and drawings complete.

NOTE:- Amount of credit of Rs. 1,92,214.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 of tender documents in pdf form which will be deducted offline while acceptance of tender.

AMIT LAMBA (BID ID -3498427)

Swami Enterprises (BID ID -3496673)

Ashwani Kumar (BID ID -3497936)

Puneet Sharma (BID ID -3497806)

G8 CONSTRUCTIONS (BID ID -3490163)