Setting up of 3.0MW In-house Captive Solar PV Plant at HBCHRC, Visakhapatnam including Planning, Design, Supply, Installation, Testing, Commissioning with One Year DLP, followed by Ten Years of Comprehensive Annual Operation and Maintenance.

PART-A (Electrical & Mechanical Works) :- Planning, Design, Supply, Installation, Testing and Commissioning of In-house captive Solar Photovoltaic Power Plant conforming to MNRE/NREDCAP/APEPDCL/APTRANSCO specifications/Guidelines as amended, including obtaining/securing all statuatory approvals/clearances. SITC of Modules of Mono Crystalline silicon solar cells Topcon N-Type, necessary protections, earthing, mounted on GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity minimum 600 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 160-1000 V DC Input voltage range and 400-440 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories(SCADA Based). d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. Post commissing Defect Liability Period (DLP) for One Year which includes comprehensive Annual Operation and Maintenance of the plant with Manpower at its full capacity as per the specification, terms and conditions of the agreement. The capacity shown shall be considered as DC capacity. As specified in technical specifications and scope of work of Technical Document.

PART-B (Civil Works) :- Civil Structures Planning, Surveying, Alignment, Structural Designing, Structural Stability Certification, Architectural & Shop Drawings etc., As specified in technical specification and scope of work of Technical Document.

1st year

2nd year

3rd year

4th year

5th year

6th year

7th year