REPAIRS BR WKS IN OTM AND MD ACCN OF ASC FD HOSPITAL AT BR2 AHMEDABAD

Amount

Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete.

S&F 2nd hard wood 35mm thick glazed and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete.

S&F factory made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete

S&F mild steel angle iron work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe290 (Gde-E-165) complete

S&F Stainless steel butt hinges medium weight 100mm long complete.

M&L for 150mm long extructed aluminium handle fabricated type complete.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete.

S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a prelaminated PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelam PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown on ser page No 156 of SSR Part II complete

S&F factory made solid PVC door, cup board frame size 50mmx47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete

S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and averae width of aperture 1.40mm and fixed with stainless steel wire staples complete

M&L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregrate in lintles up to 1.50m clear span, cills, steps, seismic and other bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings,kneelers, apex stones, bed plates, kerbs, water trough and the like including weathering, slightly rounded or chamfered angles and throating including use of form work complete.

Taking down steel windows and ventilators with frame (without taking off shutters) area not exc 1.5 sqm and removing from site of work complete.

S&F in repairs Sheet glass ordinary quality and glazing with oil putty in square n exe 0.5 sq m in each pane (Thickness in 3.00mm) complete

S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete.

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium and decorative grill with aluminium beading complete.

S&F Aluminium powder coated door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock, hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections with or without sash bars, suitable for 5 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete.

S&F aluminium anodised partition wall in panels with aluminium frame and partitions of rectangular section of size 100 x 44 x 1.48mm thick fixed in position with 4.8mm thick plain glass/ 12mm thick prelaminated particle board exterior grade all fixed with 0.70mm thick glazing beading and rubber gaskit including fixing on wall and floor with suitable size of steel chromium plated screw with rowl plug complete

M&L for grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with suitable aluminum frame of size 37x19x2mm complete .

Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.

M&L for Light shade vitrified ceramic tiles 10mm thick, (square or rectangular) polished,area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete.

M&L for Light shade vitrified ceramic tiles 10mm thick, (square or rectangular) polished,area of each tile n. exc 0.36 sqm on vertical surfaces such as skirtings, dados and risers to steps etc incl rendering 10mm thick on of brick work or concrete surfaces in cement mortar 1:4 complete

M&L for glazed ceramic coloured tiles of size 300mm X 200mm X 6-7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed in matching pigment over and including 10mm thick CM (1:4) backing coat Tiles shall be of grade B-III as per IS-13712 (1993) of First quality complete

M&L for Glazed ceramic coloured tiles in vertical surface 450 x 350 x 7mm thick set and jointd in neat cement slurry and pointed in whie or coloured cement to match pigment over and including 10mm thick CM (1:4) backing coat Tiles shall be of grade B-III as per IS-13712 (1993) of First quality complete

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete

M&L machine cut Kota stone slab 20 to 25 mm thick flooring / landing / kitchen platform laid and jointed with grey cement slurry incl. rubbing and polishing over and including 10 mm thick CM 1:4 screed bed complete. (Note: All exposed side of kota stone slab to be rounding)

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete.

S&F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws complete.(Note : Corrugation colour and shape of sheet shall be approved)

S&F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws including neoprene and EPDM washers complete.

S&F 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs walls etc fixed with L-type or J-type or cranked hook bolts complete

S&F 6mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J- Type or cranked hooks bolts complete

Dismantling wall and ceiling boards any thickness including cover fillets complete.

M&L for 6mm thick AC plain building boards as in ceiling complete.

S&F mild steel rolled sections as in framing for fixing boards in ceiling and the like fixed with angle cleats and connecting plates of grade Fe-410-S complete.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet and fixing at site on PVC frame complete.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete.

S&F 4mm thick coloured textured designer ceiling board of size 595 X 595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm, main runner shall be 0.3 mm thick of section 24 mm X 33 mm cross runner 0.3 mm thick of section 24 mm x 25 mm,wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded aggregate) in foundation filling & mass concrete as in post complete.

Dismantling timber scantling 40 sqcm & over in section framed in any position complete.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe410-W (Gde-E-250) quality A complete

Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamal paint over a coat of red oxide primer complete.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete.

M&L for 15mm thick rendering in two layer on brick work or concrete External fair faces of surfaces of wall, 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement over 10mm thick plaster in CM 1:6 & finished even and smooth without using extra cement complete. (Note : WPC shall be measured & paid separately)

M&L for rendering 10mm thick on any faces of brick work in CM 1:6 finished even and fair complete.

M&L for 5mm thick rendering on cement concrete as in ceiling with cement mortaar 1:3 complete

Supply only Integral waterproofing compound complete.

M&L for preparation of new surfaces of ceiling plastered/AC sheet and applying three coat of white wash complete

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper and a coat of primer complete.

M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat of primer on walls complete

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where complete.

M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection/path finishing the surface even and smooth w/o using extra cement including bitumen joints complete.

Demolition of cement concrete unreinforced of Concrete of any description and in any position not otherwise specifically provided for where directed complete.

Removing of existing un-serviceable water proofing treatment , taking down cement plaster etc, of any description and claening of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete.

M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sq & Laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint complete.

M&L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in levelling coarse complete

S&F in repairs 25 mm SS curtain rod with fixing bracket and knobs fixed complete.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance (exc 1.0 km total distance), beyond the lead included in the rates, including loading, unloading and stacking at the destination complete.

chhaba construction

GIRNAR CONSTRUCTION

SNEH TRADERS

DMA PROJECTS