NIMZ 35 Cr -TSIIC

Laying of Pipeline From Chalki Intake Well to Yelgoi at NIMZ Construction of pipelines for water supply with centrifugally cast (spun) Ductile Iron S/S pipes with cement mortar lining inside the pipe as per IS 4179/1989 with its amendments and revisions thereon and with rubber gaskets as per IS:8329-2000, including supply of pipes and rubber gaskets, mechanical joints as per IS:13382-1992 and jiffy joints, specials with DI as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, trench excavation (Earthwork excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing and comissioning etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges complete for finished item of work but excluding taxes. From Chalki IW to Yelgoi @NIMZ 400 mm Dia, DI-K9 Pipe line for Lateriate Soil

Construction of pipelines for water supply with centrifugally cast (spun) Ductile Iron S/S pipes as per IS 8329:2000 with cement mortar lining inside the pipe as per IS 4179/1989 with its amendments and revisions thereon and with rubber gaskets , including supply of pipes and rubber gaskets, mechanical joints as per IS:13382-1992 and jiffy joints, specials with DI as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, trench excavation (Earthwork excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing and comissioning etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges complete for finished item of work but excluding taxes. From Chalki IW to Yelgoi @NIMZ 400 mm Dia, DI-K9 Pipe line

Construction of Pipeline with MS pipes including manufacture, supply, delivery,of M.S Pipes conforming to is 3589/2001 including cost of all materials, labour charges, transportation ,lowering,laying and jointing of pipe lines true to alignment and gradient, but excluding taxes & duties, etc. including Cost of Hydrostatic Filed Test Pressure, Cost of Site Welding, Jointing Materials, Cost of Transportation of Water, Emptying Pipe Line After Completion Of Field Testing and comissioning for finished item of pipeline work complete for finished item of work but excluding taxes. 400 mm Dia 10mm thickness -MS pipe

Supply, delivery, laying and Jointing of and DI D/F Kinetic DI air valve as per IS:14845 Heavy Duty with isolating valve bevel gear operated as per IS 14846 on pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements including testing and comissioning etc. complete for finished item of work but excluding taxes. On DI line 100mm Dia PN-25 Valve on 400mm dia DI pipeline

Manufacture, Supply and delivery of DI D/F Butterfly Valves with GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay, with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504 or BS 5155 or IS:13095. Drilled as per requirement of dept. complete for finished item of work including testing and comissioning but excluding taxes. 400mm Dia PN-25 Valve on 400mm dia DI pipeline

Supply , delivery of DI Scour valve arrangement on pipe line including supply of Valve with dismantling joint, CI Specials to suit the pressure class of main line etc.complete for finished item of work including testing and comissioning but excluding taxes. 200mm Dia PN-25 Valve on 400mm dia pipeline

Railway crossing/Road crossing/Canal crossing by adopting trenchless technology tunneling work through specialized pipe jacking method by erecting the equipment to true to the alignment and gradient, by hydraulic pipe jacking technique complete including tunneling, excavation in all types of soils excluding hard rock and construction of RCC chambers suitable to casing pipe pits, and conveyance charges of machinery and other required materials but excluding cost of encasing pipe, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –Charge by Construction of Pipeline with MS pipes including manufacture, supply, delivery,of M.S Pipes conforming to is 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by shortcreting or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labour charges, transportation ,lowering,laying and jointing of pipe lines true to alignment and gradient, trench excavtion for pipe lines in all soils except Rock requring blasting, and refilling trenches with excavated earth(other than rocky soils and boulders) with watering and tamping and removeing surplus earth from site of work , but excluding taxes & duties, etc. including Cost of Hydrostatic Filed Test Pressure, Cost of Site Welding, Jointing Materials, Cost of Transportation of Water, Emptying Pipe Line After Completion Of Field Testing for 600mm dia with 10mm thickness

Supply and delivery of Steel Reinforcement H.Y.S.D. confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc., complete for finished item of work but excluding taxes.of TATA,JiNDAL,SAIL and VSP make only

Thrust Blocks & Concrete pedestals for bends , Road crossings -Cement concrete(1:1.5:3) prop using 20mm gauge HG metal including cost and conveyance of all materials and labour charges etc.complete for finished item of work including testing and comissioning but excluding taxes.

Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per IS: 5312 / Part1 /2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings. Excluding transportation etc., complete for finished item of work including testing and comissioning but excluding taxes. 400mm dia PN 20

Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per IS: 5312 / Part1 /2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings. Excluding transportation etc.,complete for finished item of work including testing and comissioning but excluding taxes. 400mm dia PN 30

Supply & delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2008 certification and flow meter testing conforming to ISO 17025; Flow meter Tube: SS 304;Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement; Liner: Hard Rubber or PTFE suitable for drinking water application; Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316; Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition) with 5 years Warranty. (Make: M/s Krohne Marshall/Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/or equivalent make).complete for finished item of work including testing and comissioning but excluding taxes. 400mm dia on 400mm dia pipeline

Electrical and Mechanical Works for 180HP VT Pumpsets ( 2+1 ) At Chalki Intakewell : Supply, installation, testing & commissioning of Vertical Turbine pump motor set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity vertical solid shaft TEFC squirrel cage induction motor (with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1000 RPM along with column and bowl assembly, discharge head, base channel / RSJ etc. complete as per relevant IS M.O.C.: Impeller & Sealing Rings: CF8M, Bowl & Suction Bell: CI FG 260 IS: 210 with 2% Ni , Shaft with coupling: SS 410, Column Pipe: MS ERW, Mechanical seal (above 30 kw) ,Base Plate: MS, Line Bearing: Thordon, Suction Strainer: S.S. complete for finished item of pipeline work but excluding taxes. MECHANICAL Vertical Turbine Pumps/submerged vertical turbine pumps Design Manufacture supply Installing testing commissoning of Vertical Turbine Pumps of suitable rpm for following duty points as specified below conforming to IS: 1710 a Duty point discharge 7576 LPM b Duty point head: suitable to provide combined discharge at rated head as mentioned below. c These pumps should be suitable for parallel operation to deliver the required combined flow of LPM for 22 Hrs/Day continuous operation by running 2 pumps with 1 standby pump at Combined Duty point head 127m and as per relevant specifications for raw water application.With Inline Lubrication piping system with required fittings including strainer valves elbows bends etc Pump efficiency shall be as per HIS Curves 6.6 KV 3 Phase 50 Hz Vertical squirrel cage induction motor Design Manufacture supply erection testing and commissioning of 11KV 3 Phase 50 Hz Vertical squirrel cage induction motor suitable to the above pump. The motor shall be conforming to IS:325 IP-55 Class of protection TEFC/CACA type of enclosure Class -F insulation with a temperature rise limited to Class-B and as per the standard specifications.

Manufacture Supply and delivery erection testing and commissioning of 150 mm DI D/F Dual Plate Check Valves PN-25 Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG 400/15 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per requirement of dept.. Specification and Dimensions as per I.S 5312 or equivalent codes complete for finished item of work including testing and comissioning but excluding taxes.

Manufacture Supply and delivery erection testing and commissioning of 400 mm DI D/F Dual Plate Check Valves PN-25 Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG 400/15 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per requirement of dept.. Specification and Dimensions as per I.S 5312 or equivalent codes complete for finished item of work but excluding taxes.

Manufacture Supply and delivery erection testing and commissioning of DI D/F Sluice Valves of 150 mm did and PN-25 with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage complete for finished item of work but excluding taxes. Drilled as per IS:1538. 150mm

Manufacture Supply and delivery erection testing and commissioning of DI D/F Butterfly Valves of 150 mm dia,PN-25 following sizes with Equivalent grade as per I.S.3896-part 2 double eccentrically Disc. with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504 or BS 5155 or IS:13095. Drilled as per IS:1538/ISO as directed by the Engineer-In-Charge complete for finished item of work but excluding taxes.

Manufacture Supply erection testing and joining at site of works and testing of MS Pipe of 150 mm dia. including jointing of individual pump riser to common header complete conforming to detailed specification including providing applying of epoxy coating ( 2 coat as per the drawing Including connection between existing of 100 mm dia Wall Thickness :- 8 mm complete for finished item of work including Comissioningbut excluding taxes.

Manufacture Supply erection testing and joining at site of works and testing of MS Pipe of 400 mm dia. including jointing of individual pump riser to common header complete conforming to detailed specification including providing applying of epoxy coating ( 2 coat as per the drawing Including connection between existing of 100 mm dia Wall Thickness :- 10 mm complete for finished item of work including Comissioning but excluding taxes.

Manufacture Supply delivery laying and Jointing of Single Chamber 100mm DI Kinetic Air Valve of PN-25 with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions on pipe line including supply of Air valve PN-25 Grade and with isolated DI Sluice Valve of PN-25 DI Specials to suit the pressure class of pipe Valve should be electrostatically powder coated from inside outside as directed by the Engineer-In-Charge. Size :100 mm dia complete for finished item of work including Testing and Comissioning but excluding taxes.

Instrumentation Providing Supplying Erecting commissioning & testing Ultrasonic flow meter Clamp on type comprising of following Clamp on type sensors having Degree of protection IP 68 suitable for MS pipeline of DN 200...4000 Temperature range –20...+80 degree C. Flow Transmitter with Twoline LCD display Degree of protection IP 65 Accuracy ± 1% of reading. Output Analog 420mA complete for finished item of work including Comissioning but excluding taxes.

Manufacture Supply Installing testing and commissoning of 5 HP Vaccume Pump DV 40 Coupled set pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10% 3 Ph 50 Hz A.C. Also providinginstallingtestingcommissioning of adequate capacity piping system with required fittings (elbows bends reducer valves strainer etc.) 5 HP DV 40 Coupled set pump.Vaccume Pumps flow 34, Pressure 400 complete for finished item of work but excluding taxes.

Supply and delivery erection of MS Flanges for MS Pipe fitting in Delivery side as per IS 1538,150mmx 15mm complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply and delivery erection of MS Flanges for MS Pipe fitting in Suction side as per IS 1538,400mm x 18mm complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel made out of No.14/16 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges.Supply of 1000A 4 Pole, 50kA Air Circuit Breaker electrically fixed Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection.-1no.Supply of 400A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted-3Nos. Supply of 32A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted-2Nos. Supply of 63A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted-2Nos.Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.-4Nos.supply and Run of 40mm x 6mm Alluminium strip (Cuurrent Carrying Capacity 350A) including cost of all accessories and labour charges etc., complete. (0.644Kgs/1Mtr). Supply and erection of 0-100 / 200 / 400 / 600 /1000 Analog Ammeter of size 96x96mm on existing box / panel board including connections etc., complete.Supply and erection of L.T. 3phase Digital multifunction energy meter with 3 lines LCD display for measuring all the parameters (voltage / Current / Power / frequency / power factor / kw / kwh / KVAR/ KVARH/) on existing box panel board including connections etc., complete.Supply and erection of selector switch for voltmeter / Ammeter on the existing box / panel including connections etc., complete.Supply and erection of LED indicator lamps on the existing box / panel board.Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing box / panel including connections etc., complete.Supply and fixing of three phase Electronic energy Meter, 415V AC,50 HZ as per IS13010 up to 40A range with 200% over load capacity complete with connections etc., complete on the existing board.Supply and fixing of 53 KVAR multi stage Capacitor bank with connection etc complete.Fabrication and tarnsportation of panel with No.14/16 guage CRCA sheet after 7 tank process including compartments and suitable for fixing above switch gears, Bus bars and metering equipment as per CPRI test certificate etc., complete for finished item of work but excluding taxes.

Supply and run of 2 of 400 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of pipeline work including Testing and Comissioning but excluding taxes.

Supply and run of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work including Testing and Comissioning and excluding taxes.

Supply and run of 10Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work including Testing and Comissioning but excluding taxes.

Electrical and Mechanical Works of 100HP VT PUMPSETS( 2+1 ) at Mungi Chowrasta to NIMZ Sangareddy segment. Supply, installation, testing & commissioning of Vertical Turbine pump motor set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity vertical solid shaft TEFC squirrel cage induction motor (with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1000 RPM along with column and bowl assembly, discharge head, base channel / RSJ etc. complete as per relevant IS M.O.C.: Impeller & Sealing Rings: CF8M, Bowl & Suction Bell: CI FG 260 IS: 210 with 2% Ni , Shaft with coupling: SS 410, Column Pipe: MS ERW, Mechanical seal (above 30 kw) ,Base Plate: MS, Line Bearing: Thordon, Suction Strainer: S.S. complete for finished item of work but excluding taxes. - 2+1 MECHANICAL Vertical Turbine Pumps/submerged vertical turbine pumps Design Manufacture supply Installing testing commissoning of Vertical Turbine Pumps of suitable rpm for following duty points as specified below conforming to IS: 1710 a Duty point discharge 7576 LPM b Duty point head: suitable to provide combined discharge at rated head as mentioned below. c These pumps should be suitable for parallel operation to deliver the required combined flow of LPM for 22 Hrs/Day continuous operation by running 2 pumps with 1 standby pump at Combined Duty point head 84m and as per relevant specifications for raw water application.With Inline Lubrication piping system with required fittings including strainer valves elbows bends etc Pump efficiency shall be as per HIS Curves 6.6 KV 3 Phase 50 Hz Vertical squirrel cage induction motor Design Manufacture supply erection testing and commissioning of 11KV 3 Phase 50 Hz Vertical squirrel cage induction motor suitable to the above pump. The motor shall be conforming to IS:325 IP-55 Class of protection TEFC/CACA type of enclosure Class -F insulation with a temperature rise limited to Class-B and as per the standard specifications.

Manufacture Supply and delivery erection testing and commissioning of 150 mm DI D/F Dual Plate Check Valves PN-25 Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG 400/15 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per requirement of dept.. Specification and Dimensions as per I.S 5312 or equivalent codes complete for finished item of work but excluding taxes.

Manufacture Supply and delivery erection testing and commissioning of 400 mm DI D/F Dual Plate Check Valves PN-25 Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG 400/15 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per requirement of dept.. Specification and Dimensions as per I.S 5312 or equivalent codes complete for finished item of work but excluding taxes.

Manufacture Supply and delivery erection testing and commissioning of DI D/F Sluice Valves of 150 mm did and PN-25 with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. 150mm complete for finished item of work but excluding taxes.

Manufacture Supply and delivery erection testing and commissioning of DI D/F Butterfly Valves of 150 mm dia,PN-25 following sizes with Equivalent grade as per I.S.3896-part 2 double eccentrically Disc. with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504 or BS 5155 or IS:13095. Drilled as per IS:1538/ISO as directed by the Engineer-In-Charge complete for finished item of work but excluding taxes.

Manufacture Supply erection testing and joining at site of works and testing of MS Pipe of 150 mm dia. including jointing of individual pump riser to common header complete conforming to detailed specification including providing applying of epoxy coating ( 2 coat as per the drawing Including connection between existing of 100 mm dia Wall Thickness :- 8 mm complete for finished item of work including Comissioning but excluding taxes.

Manufacture Supply erection testing and joining at site of works and testing of MS Pipe of 400 mm dia. including jointing of individual pump riser to common header complete conforming to detailed specification including providing applying of epoxy coating ( 2 coat as per the drawing Including connection between existing of 100 mm dia Wall Thickness :-10 mm complete for finished item of work including Comissioning but excluding taxes.

Manufacture Supply delivery laying and Jointing of Single Chamber 100mm DI Kinetic Air Valve of PN-25 with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions on pipe line including supply of Air valve PN-25 Grade and with isolated DI Sluice Valve of PN-25 DI Specials to suit the pressure class of pipe Valve should be electrostatically powder coated from inside outside for finished item of work as directed by the Engineer-In-Charge. Size :100 mm dia.complete for finished item of work including Testing and Comissioning but excluding taxes.

Instrumentation: Providing Supplying Erecting commissioning & testing Ultrasonic flow meter Clamp on type comprising of following Clamp on type sensors having Degree of protection IP 68 suitable for MS pipeline of DN 200...4000 Temperature range –20...+80 degree C. Flow Transmitter with Twoline LCD display Degree of protection IP 65 Accuracy ± 1% of reading. Output Analog 420mA complete for finished item of work including transportation charges, loading, unloading and stacking but excluding taxes.

ManufactureSupplyInstalling testing and commissoning of 5 HP Vaccume Pump DV 40 Coupled set pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10% 3 Ph 50 Hz A.C. Also providinginstallingtestingcommissioning of adequate capacity piping system with required fittings (elbows bends reducer valves strainer etc.) 5 HP DV 40 Coupled set pump.Vaccume Pumps flow 34, Pressure 400 complete for finished item of work including transportation charges, loading, unloading and stacking but excluding taxes.

Supply and delivery erection of MS Flanges for MS Pipe fitting in Delivery side as per IS 1538,150mm complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply and delivery erection of MS Flanges for MS Pipe fitting in Suction side as per IS 1538, 150mm complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel made out of No.14/16 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges.Supply of 1000A 4 Pole, 50kA Air Circuit Breaker electrically fixed Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection.-1no.Supply of 400A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted-3Nos. Supply of 32A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted-2Nos. Supply of 63A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted-2Nos.Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.-4Nos.supply and Run of 40mm x 6mm Alluminium strip (Cuurrent Carrying Capacity 350A) including cost of all accessories and labour charges etc., complete. (0.644Kgs/1Mtr). Supply and erection of 0-100 / 200 / 400 / 600 /1000 Analog Ammeter of size 96x96mm on existing box / panel board including connections etc., complete.Supply and erection of L.T. 3phase Digital multifunction energy meter with 3 lines LCD display for measuring all the parameters (voltage / Current / Power / frequency / power factor / kw / kwh / KVAR/ KVARH/) on existing box panel board including connections etc., complete.Supply and erection of selector switch for voltmeter / Ammeter on the existing box / panel including connections etc., complete.Supply and erection of LED indicator lamps on the existing box / panel board.Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing box / panel including connections etc., complete.Supply and fixing of three phase Electronic energy Meter, 415V AC,50 HZ as per IS13010 up to 40A range with 200% over load capacity complete with connections etc., complete on the existing board.Supply and fixing of 53 KVAR multi stage Capacitor bank with connection etc complete.Fabrication and tarnsportation of panel with No.14/16 guage CRCA sheet after 7 tank process including compartments and suitable for fixing above switch gears, Bus bars and metering equipment as per CPRI test certificate etc., complete for finished item of work but excluding taxes.

Supply and run of 2 of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply and run of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply and run of 10Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work including Testing and Comissioning but excluding taxes.

Construction of approach bridge at Chalki intakewell Earthwork excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH complete for finished item of work but excluding taxes. Ordinary soil CF2 covered in intake well excavation For Footing CF1 For Footing CF1 For Footing CF1 For Footing CF3 For Footing CF3 For Footing CF3

Back Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work but excluding taxes. (APSS NO. 309 & 310) Excavated qty. For Footing CF1 PCC For Footing CF3 PCC For Footing CF2 PCC For Footing CF1 RCC For Footing CF3 RCC For Footing CF2 RCC For C2 For C2 For C1

Back Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work but excluding taxes. (APSS NO. 309 & 310) For Ramp triangle portion For Ramp triangle portion

Plain Cement concrete 1:3:6 prop (Cement : fine aggregate: coarse aggregate ) for foundation and under flooring bed using 40mm size (SS 5) Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , cost of seigniorage charges on all materials, all taxes, labour charges , for mixing , laying, concrete in foundation ramming in 15 cm layers, finishing top surface to the required level curing etc., as per (S.S. No. 402) complete for finished item of work but excluding taxes For Footing CF2 & CF3 For Footing CF1 Beam B5 for Gr. 4-10

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. For Laying of Concrete in foundations Footing Footing CF2 & CF3 For Footing CF1 Wing walls base

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. For Laying of Concrete for Columns Columns Grid1 Below GL C1 900 ∅ 510.7-511.00 Grid-1

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. For Laying of Concrete for Columns Columns Grid1 Below GL C1 900 ∅ 511-512 Grid-1

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. For Laying of Concrete for Columns Columns Grid1 Below GL C1 900 ∅ 512-513 Grid-1

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. For Laying of Concrete for Columns Columns Grid1 Below GL C1 900 ∅ 513-514 Grid-1

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication chargescomplete for finished item of work but excluding taxes. For Laying of Concrete for Columns Columns Grid1 Below GL C1 650 ∅ 514-515 Grid-3 Below GL C1 900 ∅ 514-515 Grid-1, Grid-2

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication chargescomplete for finished item of work but excluding taxes. For Laying of Concrete for Columns Columns Grid1 Below GL C1 650 ∅ 515-516 Grid-3 Below GL C1 900 ∅ 515-516 Grid-1, Grid-2

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication chargescomplete for finished item of work but excluding taxes. For Laying of Concrete for Columns Columns Grid1 Below GL C1 650 ∅ 516-517 Grid-3 Below GL C1 900 ∅ 516-517 Grid-1, Grid-2

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. For Laying of Concrete for Columns Columns Grid1 Below GL C1 650 ∅ 517-518 Grid-3 Below GL C1 900 ∅ 517-518 Grid-1, Grid-2

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. For Laying of Concrete for Columns Columns Grid1 Below GL C1 650 ∅ 518-521 Grid-3 Below GL C2 650 ∅ 518-521 Grid 4 to10 Above GL C1 900 ∅ 521-524 Grid-1, Grid-2 Above GL C2 650 ∅ 521-524 Grid 3 to 10

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication chargescomplete for finished item of work but excluding taxes. For Laying of Concrete for Columns Columns Grid1 Above GLC1 650 ∅ 524-524.8 Grid 3 to 10 Above GLC1 900 ∅ 524-524.8 Grid-1, Grid-2

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges fcomplete for finished item of work but excluding taxes. Tie beam Grid 1 Tie Beam at 512.6 for Grid-1

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication chargescomplete for finished item of work but excluding taxes. Tie beam Grid 1 Tie Beam at 514 for Grid-1

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Tie beam Grid 1 Tie Beam at 516.8 for Grid-1

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Tie beam Grid 1 Tie Beam at 519.2 for Grid-3 Tie Beam at 519.2 for Grid-2 Tie Beam at 519.2 for Grid-3 Tie Beam at 521 for Grid-1 Tie Beam B5Col. C2 Grid3-10 Beams deck slab level For beam B4 Deduction for column For beam B3 Deduction for column For beam B1 Deduction for column C1 Deduction for column C2 For beam B2 Deduction for beam B3

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Tie beam Grid 1 Kerb wall Handrail post Saddle PS1

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Tie beam Grid 1 Deck Slab

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication complete for finished item of work but excluding taxes. Tie beam Grid 1 Abutment at ond of FB Wing walls of FB

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Tie beam Grid 1 Abutment at ond of FB Wing walls of FB

Supply and delivery of Steel Reinforcement H.Y.S.D. confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc., complete for finished item of work but excluding taxes.

White washing inclusing of all charges complete for finished item of work but excluding taxes.

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, overhead charges & Contractors profit etc., complete but excluding VAT and seigorage charges for finished item of work as per APSS No.911 for external walls complete for finished item of work but excluding taxes. Column Above GL C1 900 ∅ Above GL C1 900 ∅ Above GL C2 650 ∅ Deck slab For beam B4 For beam B3 For beam B1 For beam B2 For beam B5 Slab Kerb wall Handrail post Saddle PS1 Bottom of beam Side protection

Flooring with CM(1:3) prop 20 mm thick over bed of 100 mm thick,CC (1:4:8) prop using 40mm HG metal including cost and conveyance of all materials and seignorage charges etc., complete for finished item of work but excluding taxes. Approach bridge

Plastering with 12mm thick with sponge finish first coat in CM(1:5) Prop 8mm thick and second coat in CM(1:3) prop 4mm thick including cost and conveyance of all materials and labour charges etc., complete for finished item of work but excluding taxes. Bottom of beam Side protection

Cost MS Angles,Beams, Plates & Channels fabrication includind cutting,welding , bending etc., complete for finished item of work but excluding taxes. IP-1 (1.192X300X10) IP-2 (150X150X10) IP-3 (200X200X10) Lugs Lugs Lugs

Stainless Steel Tubes,flates,plates,sheets and pipes of all sizes and diameters for 304 Grade including labour charges for fabrication using stainless steel welding rods including buffing,polishing,lacquer finish to present seamless finish complete for finished item of work but excluding taxes.

Synthatic Enamil paint including cost and conveyance of all the materials etc. complete for finished item of work but excluding taxes. Handrail pipe

Construction of Intakewell cum Pumphouse at Chalki Earthwork excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH complete for finished item of work but excluding taxes. For Intake well 0-3m (521.00-518.00)

Earthwork excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH complete for finished item of work but excluding taxes. For Intake well 3-6m (518.00-515.00)

Earthwork excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH complete for finished item of work but excluding taxes. For Intake well 6-12m (515.00-509.5)

Back Filling with (sand ) useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work but excluding taxes. (APSS NO. 309 & 310) Total Excavated Qty. Deduction for PCC+Raft Deduction for shaft portion

CC(1:3:6)using 40 mm 60% and 20mm 40% HBG metal icluding Cost and conveyance of the all materialsof all materials and labour charges ,seigniorage charges using concret mixer etc complete for finished item of work but excluding taxes. For Intake well For raft PCC 509.8 -509.5

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Raft of Intake well 509.8-510.7

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Side Walls 0.45 Mt Thick 517.00-518.00 3-4m 518.00-519.00 2-3m 519.00-520.00 1-2m 520.00-521.00 0-1m Channel Opening- 2nos 1-2m deduct tie beam @520.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Side Walls 0.45 Mt Thick 516.00-517.00 4-5m deduct tie beam @517.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Side Walls 0.45 Mt Thick 515.00-516.00 5-6m deduct column portion

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Side Walls 0.45 Mt Thick 514.00-515.00 6-7m deduct tie beam @514.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Side Walls 0.45 Mt Thick 513.00-514.00 7-8m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Side Walls 0.45 Mt Thick 512.00-513.00 8-9m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Side Walls 0.45 Mt Thick 511.00-512.00 9-10m Deduct for raft beam portion @ 510.70

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Side Walls 0.45 Mt Thick 510.70-511.00 10 to11m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Side Walls 0.30 Mt Thick (above GL) 521.00-524.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Side Walls 0.30 Mt Thick (above GL) 524.00-526.50

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 510.70-511.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 511.00-512.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 512.00-513.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 513.00-514.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 514.00-515.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 515.00-516.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 516.00-517.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 517.00-518.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 518.00-519.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 519.00-520.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 520.00-521.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 521.00-524.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 524.00-525.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 525.00-526.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns 526.00-526.50

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns Above Floor Level 526.50-527.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns Above Floor Level 527.00-528.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns Above Floor Level 528.00-529.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns Above Floor Level 529.00-530.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns Above Floor Level 530.00-531.00

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns Above Floor Level 531.00-531.50

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Stair landing slab 514-below GL 7-8m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Stair landing slab 517-below GL 3-4m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Stair landing slab 520-below GL 0-1m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Stair landing slab 523.00 Above GL-2m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Baffle Wall-Below GL 510.70-511.00-4-5m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Baffle Wall 511.00-512.00-5-6m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Baffle Wall 512.00-513.00-6-7m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Baffle Wall 513.00-513.7-7-8m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Floor Beams FB1 526.50-3-4mFB2 526.50-3-4m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Raft Beam

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Tie beam (Circular) 514.00-514.60-6-7m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work excluding taxes. 514.00-514.60 517.00-517.60-3-4m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. 517.00-517.60 520.00-520.60-0-1m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. 520.00-520.60 523.00-523.60 above GL-0-3m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Roof beam (Circular) 532-533 Dome level 11-12m RCC parapet over top dome 1

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Bracket Beam 530-531 9-10m

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Pedestals Pedestral (VS-1) Pedestral (PS-1) Pedestral (PS-2) Pedestral (PS-3) Saddle support (PS-4)

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. PUMP ROOM FLOOR SLAB 531.5-531.65 Balcony Parapet Deduct openings

Supply and placing of the Design M30 grade Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Top Dome 531.5-533.65

VRCC(1:1.5:3) using 20 mm HBG metal for Sun Shades of Size 75 mm thick at one end 50mm other end and 600mm width ,including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for finished item of work but excluding taxes. 529.30-529.6

Supply and delivery of Steel Reinforcement H.Y.S.D. confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc complete for finished item of work but excluding taxes.

Acco-proof Plastering with CM(1:3) prop12mm thick with 2% acco-proof powder including cost and conveyance of all the materials lalbour charges,seign. etc complete for finished item of work but excluding taxes. Over Top Dome 531.5-533.65 13-14 Mts

Plastering with 12mm thick with sponge finish first coat in CM(1:5) Prop 8mm thick and second coat in CM(1:3) prop 4mm thick including cost and conveyance of all materials and labour charges etc complete for finished item of work but excluding taxes. Area of Brick work 2 Deduction for Windows 7 Door 1 Rolling shutter 1 Ventilator 7

Flooring with CM(1:3) prop 20 mm thick over bed of 100 mm thick,CC (1:4:8) prop using 40mm HG metal including cost and conveyance of all materials and seignorage charges etc., complete complete for finished item of work but excluding taxes.. In intake well Flooring

Brick Msaonary with CM(1:6) using Second Class Bricks including cost and conveyance of all the materials etc., complete complete for finished item of work but excluding taxes. Brick work 230mm wall 526.5 - 527.00 5-6

Brick Msaonary with CM(1:6) using Second Class Bricks including cost and conveyance of all the materials etc., complete complete for finished item of work but excluding taxes. Brick work 230mm wall 527.00 - 529.50 6-8m Deduction for Rolling shutter Door Windows Steel Glazed opwnable Deduction for Column Tie beam at (+527.10)

Brick Msaonary with CM(1:6) using Second Class Bricks including cost and conveyance of all the materials etc., complete complete for finished item of work but excluding taxes. Brick work 230mm wall 529.5 -531.5 8-9m Tie beam at (+531.50) 1 Deduction for Column Steel Glazed fixed Deduction for Rolling shutter

White washing inclusing of all charges complete for finished item of pipeline work but excluding taxes.

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, overhead charges & Contractors profit etc., complete for finished item of work but excluding taxes. as per APSS No.911 for external walls Qty as per Plastering

Supply and fixing of Rolling shutter made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and out side locking with push pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work as per special spn: 1108 etc., complete for finished item of work but excluding taxes. Rolling shutter Rolling shutters

Synthatic Enamil paint including cost and conveyance of all the materials etc., complete for finished item of work but excluding taxes. Rolling shutters 1.25 Windows 1.5

Supply of 18 inches(450mm) ISI, 900RPM Heavy duty exhaust fan with metallic blades with mark of makes Crompton/almounard/Havells turbo force etc., complete for finished item of work but excluding taxes.

Construction of 1000Kl Sump at Mungi Chowrastha Earthwork excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH complete for finished item of work but excluding taxes.

Cement concrete (1:4:8)prop using 40 mm gauge HG metal including cost &conveyance of all materials and labour charges ,seigniorage charges using concret mixer etc., complete for finished item of work but excluding taxes. For PCC bed

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Bottom Raft Foundation Bottom Raft Foundation for slope portion

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Short Wall 600 mm Add portion of short wall at suction pit side Long Wall 600 mm Add portion of short wall at suction pit side

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Haunch Portion All Round

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Short Wall 300 mm Long Wall 300 mm

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Columns Air vent columns

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Air vent mesh concrete

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Air vent slab concrete

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work excluding taxes. Roof beams Short beams (4 no.s) -SRB1 Long beams (3 no.s) -LRB1

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Roof Slab

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Head room columns

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Head Room Beams-HRB2 Head Room Beams HRB1

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Over Head Room Roof Slab

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Staircase 1st Flight (Staircase)

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Staircase 1st Flight (Staircase)

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Staircase 1st Flight (Staircase)

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Staircase 1st Flight (Staircase)

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Staircase 1st Flight (Staircase)

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Staircase 1st Flight (Staircase)

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication chargescomplete for finished item of work but excluding taxes. Staircase 1st Flight (Staircase)

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges complete for finished item of work but excluding taxes. Staircase 1st Flight (Staircase)

Brick Masonry work for super structure with CM (1:6) with traditional brick size of 23X11X7 including cost and conveyance of all materials and labour charges etc., complete for finished item of work but excluding taxes. Head room long side wall Short side wall

Acco-proof Plastering with CM(1:3) prop12mm thick with 2% acco-proof powder including cost and conveyance of all materials and labour charges etc., for sump well complete for finished item of work but excluding taxes. as per standard specifications Inside wall plastering Short side Inside wall plastering Suction pit side Longer side wall Longer side wall Suction pit side Columns plastering 4 sides Sump bottom slab Stair case 1st Flight -Waist Slab bottom Waist slab Side face Steps portion-Sides Steps Portion -Tread Steps Portion -Rise Landing Slab-bottom Landing Slab top 2nd Flight -waist Slab portion Waist Slab Side face Steps portion-Sides Steps Portion -Tread Steps Portion -Rise

Acco-proof Plastering with CM(1:3) prop 20mm thick with 2% acco-proof powder including cost and conveyance of all materials and labour charges etc., as per standard specifications for sump well complete for finished item of work but excluding taxes outside wall plastering Short side Outside wall plastering longer side Top Slab Over Head Room Roof Slab

Plastering with 12mm thick with sponge finish first coat in CM(1:5) Prop 8mm thick and second coat in CM(1:3) prop 4mm thick including cost and conveyance of all materials and labour charges etc., complete for finished item of work but excluding taxes. for head room a) Head Room Inside Long Wall Side Short wall Side b) Head Room Outside Long Wall Side Short wall Side

Epoxy Paint including cost and conveyance of all materials and labour charges etc., as per standard specifications for sump complete for finished item of work but excluding taxes Sump Inside Side walls Longer side Side walls Longer side suction pit side Shorter side wall Shorter Side wall suction pit side Bottom Slab (Raft) To Columns all round Staircase 1st Flight -Waist Slab bottom Waist slab Side face Steps portion-Sides Steps Portion -Tread Steps Portion -Rise Landing Slab-bottom Landing Slab top 2nd Flight -waist Slab portion Waist Slab Side face Steps portion-Sides Steps Portion -Tread Steps Portion -Rise

Painting to walls with 2 coats of acrylic emulsion paint exterior grade of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc for external walls complete for finished item of work but excluding taxes . To Sump Sidewall Pump House Side Existing Sump Side Private Land Side Road side Top Slab Top Slab Outside Projection Longer side Shorter side Slab Sides Slab sides To Phenial Columns To Airvent mesh To Airvent Slab Head Room Inside Long Wall Side Short wall Side Slab Ceiling Head Room Outside Long Wall Side Short wall Side Slab projection ceiling Long Side Short Side Slab Sides Slab Sides

Providing of Stainless Steel pipe of grade 304 hand railing of including cost and conveyance of all materials and labour charges etc., complete To Clear Water Sump Top Slab All Round To Staircase Out side stair case

Providing Stainless Steel Fly Proof Mesh using 20mm gauge including cost and conveyance of all material and labour charges etc., complete for finished item of work but excluding taxes. fly proof mesh

Supply and delivery of Steel Reinforcement H.Y.S.D. confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc., complete for finished item of work but excluding taxes.

Construction of New Substation Work at Chalki Intakewell and Mungi Chowrastha. Supply and Transportation of 500KVA TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per IS : 1180 OCTC with Level - I with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes: Kirloskar / PETE / Esennar / Voltamp / Crompton / ABB / Schneider// SSE . 1.Quantity : 12. Rated KVA : ........KVA3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed7. Cooling : ONAN8. Temp Rise : 40⁰C in oil, 45⁰C by resistance9. Vector Group: Dyn 1110. Primary Connection : Delta11. Nominal Voltage / Current : ______12. Highest system Voltage: 12000V13. Primary Frequency :50 HZ +/- 3%14. Number of Phases : 3 15. Primary wires: 316. Secondary connection : Star17. Secondary Volts / Current : 433V18. Secondary phases : 319. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps 21. Terminal arrangement. a.HV: HT terminal box as per the site condition. b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable 22. LV:One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] --- as per IS 24. Total Losses at 100% Loading [Watts] [Max]--- as per IS 25.Percentage Impedance at 75 deg. C at ----- as per IS 26. No Load current: Less than 2% of full load current. 27. Standrad Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs:Two c. Off-circuit tap switch :One d. Earthing Terminals :Two e. Radiators ( Attachable) :Adequate f. Explosion vent with Diaphragm :One g. Conservator with Drain plug:one h. Oil filling hole with cap :One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10Cm dial thermometer(Rigid stem type) 500 KVA Copper Wound Transformer, complete for finished item of work but excluding taxes.

Supply and Transportation of 1000KVA TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per IS : 1180 OCTC with Level - I with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes: Kirloskar / PETE / Esennar / Voltamp / Crompton / ABB / Schneider// SSE . 1.Quantity : 12. Rated KVA : ........KVA3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed7. Cooling : ONAN8. Temp Rise : 40⁰C in oil, 45⁰C by resistance9. Vector Group: Dyn 1110. Primary Connection : Delta11. Nominal Voltage / Current : ______12. Highest system Voltage: 12000V13. Primary Frequency :50 HZ +/- 3%14. Number of Phases : 3 15. Primary wires: 316. Secondary connection : Star17. Secondary Volts / Current : 433V18. Secondary phases : 319. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps 21. Terminal arrangement. a.HV: HT terminal box as per the site condition. b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable 22. LV:One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] --- as per IS 24. Total Losses at 100% Loading [Watts] [Max]--- as per IS 25.Percentage Impedance at 75 deg. C at ----- as per IS 26. No Load current: Less than 2% of full load current. 27. Standrad Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs:Two c. Off-circuit tap switch :One d. Earthing Terminals :Two e. Radiators ( Attachable) :Adequate f. Explosion vent with Diaphragm :One g. Conservator with Drain plug:one h. Oil filling hole with cap :One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10Cm dial thermometer(Rigid stem type) 1000 KVA Copper Wound Transformer , complete for finished item of work but excluding taxes.

Supply, Installation, Testing and Commissioning of OLTC for transformers with RTCC etc., complete for finished item of work but excluding taxes. 1000 KVA & 500 KVA Copper Wound Transformer , complete for finished item of work but excluding taxes.

Supply, Fabrication, Transportation and erection of DP structure made with 2 Nos 175mm x 85mm ( ISMB Modified ) or equivalent about 30'-0 length / 9.1 mtrs length RS joist pole erection of the same Including excavation of pit in all kinds of soil including breaking stones, concreting with (1:3:6) mixture base plate, coil earthing back filling, 1:2:4 for couping including red oxide primary painting and two coats of aluminium painting etc., complete as required with following as per CEIG norms, complete for finished item of work but excluding taxes.

Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft and at the top and pedastal of above size with brick masonry duly plastered with 20mm thick including watering etc., complete for finished item of work but excluding taxes.

Providing CTPT plinth 600mm x 600mm x 2.1 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft and at the top and pedastal of above size with brick masonry duly plastered with 20mm thick including watering etc., complete for finished item of work but excluding taxes.

Supply of 95 Sqmm 3 Core HT XLPE (E) insulated 11000 V grade armoured Cable, as per IS specification confirming to IS 7098/II/85 with latest amendments. Makes : Torrent / Unicab / Universal / Polycab / Havells / KEI / Gloster, complete for finished item of work but excluding taxes.

Supply of 1600A 4 Pole, 50kA, electrically drawoutAir Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection , complete for finished item of work but excluding taxes. Makes : Siemens (Sentron- 3W) / LK U Power / Schneider Master Pact / ABB Emax / Legrand DMX3 / BCH / Eaton / Havells

Supply of 1000A 4 Pole, 50kA, electrically drawoutAir Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection, complete for finished item of work but excluding taxes. Makes : Siemens (Sentron- 3W) / LK U Power / Schneider Master Pact / ABB Emax / Legrand DMX3 / BCH / Eaton / Havells

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. Long connected with reducer providing G.I funnel with mesh enclosed in C.C/brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe gig earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) , complete for finished item of work but excluding taxes.

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc., as per IS specification 732/1982 (Part II) complete for finished item of work but excluding taxes

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe gig earth connection from electrode through flange with all accessories and labour charges as per IS specifications 732/1982 (Part II). , complete for finished item of work but excluding taxes.

Construction of approach bridge at Chalki intakewell Construction of Foot Bridge of 7.5m carriage width and 100 m length with RCC framed structure with M-30 grade mix (weigh batching) necessary foundations, coloums, beams, wearing coat to slab and plastering with Cement mortar and using Steel Reinforcement H.Y.S.D.( SAIL, VSP STEEL, TATA make only), as per schematic drawings (Part C of Vol-I) and as specified in item of Technical specification (Part B of Vol-I) including cost, Conveyance of all materials, labour charges etc., for finished item of work as per specifications, designes, approved by the department etc and as per instructions of Engineer in charge complete for finished items of the work, including Testing and Comissioning and excluding taxes.

Construction of Intakewell cum Pumphouse at Chalki Construction of Circular Intake Well cum pump house of 10mtrs dia for depth height as per field conditions and drawings approved by the department , with the specifications such as with M-30 grade vibrated reinforced cement concrete ( weigh batching) and using Steel Reinforcement H.Y.S.D.( SAIL, VSP STEEL, TATA make only), at site selected by the department ,and as per schematic drawings (Part C of Vol - I ) and pumphouse with positive suctin at intake well suitable to raw water sump , RCC framed structures, necessary foundations and Brick masonry walls plastering with CM, and using with best doors and windows and cement concrete flooring with RCC roof slab and as specified in technical specifications( Part B of Vol -I ) including earthwork excavation in wet or dry conditions including cost and conveyance of all materials, fixtures, CI pipes, specials, labour charges and testing the structure for water tightness etc.,for finished item of work as per specifications, designes, approved by the department etc and as per instructions of Engineer in charge complete for finished items of the work, including Testing and Comissioning and excluding taxes.

Construction of 1000Kl Sump at Mungi Chowrastha Construction of 1000 KL sump as per site selected by the department with vibrated reinforced cement concrete M-30 Grade (weight batching) and Fe500 ( of make of SAIL,JINDAL, VSP and TATA only) with Acco-proof Plastering with CM(1:3) prop. as per specifications, design and drawings approved by the department (Vol -I Part C) and as specified in technical specifications (volume I Part B) including earthwork excavation in all types of soils except rock requiring blasting in wet or dry conditions including cost and conveyance of all materials, fixtures, labour charges, inlet,outlet & over flow pipe arrangements as per specifications, designes, approved by the department etc and as per instructions of Engineer in charge complete for finished items of the work, including Testing and Comissioning and excluding taxes.

Laying of Pipeline From Chalki Intake Well to Yelgoi at NIMZ Construction of pipelines for water supply with centrifugally cast (spun) Ductile Iron S/S pipes as per IS 8329:2000 (including ammendments if any) with cement mortar lining inside the pipe as per IS 4179/1989 (including ammendments if any) with its amendments and revisions thereon and with rubber gaskets, including supply of pipes and rubber gaskets, mechanical joints as per IS:13382-1992(including ammendments if any) and jiffy joints, specials with DI as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, trench excavation in laterite soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing and comissioning etc. with trench size 1.5mx2.0m, complete., The rates are inclusive of cost and conveyance of all materials and labour charges complete for finished item of work but excluding taxes. From Chalki IW to Yelgoi @NIMZ 400 mm Dia, DI-K9 Pipe line for Lateriate Soil

Construction of pipelines for water supply with centrifugally cast (spun) Ductile Iron S/S pipes as per 8329:2000 (including ammendments if any) with cement mortar lining inside the pipe as per IS 4179/1989( including ammendtments if any) with its amendments and revisions thereon and with rubber gaskets as per IS:8329-2000(including ammendments if any), including supply of pipes and rubber gaskets, mechanical joints as per IS:13382-1992 (including ammendments if any) and jiffy joints, specials with DI as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, trench excavation (Earthwork excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing and comissioning etc.with trench size of 1.00 m x 1.4m , complete., The rates are inclusive of cost and conveyance of all materials and labour charges complete for finished item of work but excluding taxes. From Chalki IW to Yelgoi @NIMZ 400 mm Dia, DI-K9 Pipe line

Construction of Pipeline with MS pipes including Manufacture, supply and delivery of M.S Pipes conforming to IS 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe/food grade epoxy painting and out coating with cement mortar (1:3) 30mm thick by shortcreting or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labour charges, transportation to anywhere in T.G, but excluding all taxes. including Cost of Hydrostatic Filed Test Pressure, Cost of Site Welding, Jointing Materials, Cost of Transportation of Water, Emptying Pipe Line After Completion Of Field Testing and comissioning for finished item of pipeline work complete for finished item of work but excluding taxes. 400 mm Dia 10mm thickness -MS pipe

Supply, delivery, laying and Jointing of and DI D/F Kinetic DI air valve as per IS:14845 Heavy Duty with isolating valve bevel gear operated as per IS 14846 (including ammendments if any) on pipe line including supply of Air valve ,CI Specials to suit PN 25 pressure valves and construction of stem with DI D/F pipe of suitable dia and concreting all around the vertival pipe including testing and comissioning etc. complete for finished item of work but excluding taxes. On DI line 100mm Dia PN-25 Valve on 400mm dia DI pipeline

Manufacture, Supply and delivery of DI D/F Butterfly Valves with GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part 2-1985 (including ammendments if any) and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay, with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements. Face to face dimensions as per AWWA C 504 or BS 5155 or IS:13095. Drilled as per requirement of dept. complete for finished item of work including testing and comissioning but excluding taxes. 400mm Dia PN-25 Valve on 400mm dia DI pipeline

Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4 ( including all ammendments if any). All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept.including supply of Valve with dismantling joint, CI Specials to suit the pressure class of main line etc and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements.complete for finished item of work including testing and comissioning but excluding taxes. 200mm Dia PN-25 Valve on 400mm dia pipeline

Railway crossing/Road crossing/Canal crossing by adopting trenchless technology tunneling work through specialized pipe jacking method by erecting the equipment to true to the alignment and gradient, by hydraulic pipe jacking technique complete including tunneling, excavation in all types of soils excluding hard rock and construction of RCC chambers suitable to casing pipe pits, and conveyance charges of machinery and other required materials but excluding cost of encasing pipe, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in –Charge and Construction of Pipeline with MS pipes including manufacture, supply, delivery,of M.S Pipes conforming to is 3589/2001 ( including ammendments if any) including in lining with anti corrosive bitumen coat using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and out coating with anti corrosive bitumen coat including cost of all materials, labour charges, transportation ,lowering,laying and jointing of pipe lines true to alignment and gradient, trench excavtion for pipe lines in all soils except Rock requring blasting, and refilling trenches with excavated earth(other than rocky soils and boulders) with watering and tamping and removeing surplus earth from site of work , but excluding taxes & duties, etc. including Cost of Hydrostatic Filed Test Pressure, Cost of Site Welding, Jointing Materials, Cost of Transportation of Water, Emptying Pipe Line After Completion Of Field Testing etc complete for finished item of work including testing and comissioning but excluding taxes.

Supply and delivery of Steel Reinforcement H.Y.S.D.( SAIL, VSP STEEL, TATA make only) confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc., complete for finished item of work but excluding taxes.

Thrust Blocks & Concrete pedestals for bends , Road crossings -Cement concrete(1:1.5:3) prop (weigh batching) using 20mm gauge HG metal including cost and conveyance of all materials and labour charges etc.complete for finished item of work including testing and comissioning but excluding taxes.

Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per IS: 5312 / Part1 /2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings. Including transportation etc., complete for finished item of work including testing and comissioning but excluding taxes. 400mm dia PN 20

Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per IS: 5312 / Part1 /2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings. Including transportation etc.,complete for finished item of work including testing and comissioning but excluding taxes. 400mm dia PN 30

Supply & delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2008 certification and flow meter testing conforming to ISO 17025; Flow meter Tube: SS 304;Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement; Liner: Hard Rubber or PTFE suitable for drinking water application; Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316; Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition) ; Ingress Protection: IP 68 for sensor and IP 67 for transmitter; Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above; Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow; Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit; Surge Arrester: To be provided;Power Supply & Output: 230 V AC or 24 V DC as applicable to Site condition & 4-20 mA HART; Compatible to SCADA/WEB Based Data acquisition System; Flow meter test lab certification should be provided from NABL approved lab/FCRI ; Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall/Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make) including transportaion complete for finished item of work including testing and comissioning but excluding taxes. 400mm dia on 400mm dia pipeline

Electrical and Mechanical Works for 180HP VT Pumpsets ( 2+1 ) At Chalki Intakewell : Supply, installation, testing & commissioning of Vertical Turbine pump motor set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity vertical solid shaft TEFC squirrel cage induction motor (with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1000 RPM along with column and bowl assembly, discharge head, base channel / RSJ etc. complete as per relevant IS M.O.C.: Impeller & Sealing Rings: CF8M, Bowl & Suction Bell: CI FG 260 IS: 210 with 2% Ni , Shaft with coupling: SS 410, Column Pipe: MS ERW, Mechanical seal (above 30 kw) ,Base Plate: MS, Line Bearing: Thordon, Suction Strainer: S.S. complete for finished item of pipeline work but excluding taxes. MECHANICAL Vertical Turbine Pumps/submerged vertical turbine pumps Design Manufacture supply Installing testing commissoning of Vertical Turbine Pumps of suitable rpm for following duty points as specified below conforming to IS: 1710 a Duty point discharge 7576 LPM b Duty point head: suitable to provide combined discharge at rated head as mentioned below. c These pumps should be suitable for parallel operation to deliver the required combined flow of LPM for 22 Hrs/Day continuous operation by running 2 pumps with 1 standby pump at Combined Duty point head 127m and as per relevant specifications for raw water application.With Inline Lubrication piping system with required fittings including strainer valves elbows bends etc Pump efficiency shall be as per HIS Curves 6.6 KV 3 Phase 50 Hz Vertical squirrel cage induction motor Design Manufacture supply erection testing and commissioning of 11KV 3 Phase 50 Hz Vertical squirrel cage induction motor suitable to the above pump. The motor shall be conforming to IS:325 IP-55 Class of protection TEFC/CACA type of enclosure Class -F insulation with a temperature rise limited to Class-B and as per the standard specifications.

Manufacture Supply and delivery erection testing and commissioning of 150 mm DI D/F Dual Plate Check Valves PN-25 Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG 400/15 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per requirement of dept.. Specification and Dimensions as per I.S 5312 or equivalent codes complete for finished item of work including testing and comissioning but excluding taxes.

Manufacture Supply and delivery erection testing and commissioning of 400 mm DI D/F Dual Plate Check Valves PN-25 Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG 400/15 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per requirement of dept.. Specification and Dimensions as per I.S 5312 or equivalent codes complete for finished item of work but excluding taxes.

Manufacture Supply and delivery erection testing and commissioning of DI D/F Sluice Valves of 150 mm did and PN-25 with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage complete for finished item of work but excluding taxes. Drilled as per IS:1538. 150mm

Manufacture Supply and delivery erection testing and commissioning of DI D/F Butterfly Valves of 150 mm dia,PN-25 following sizes with Equivalent grade as per I.S.3896-part 2 double eccentrically Disc. with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504 or BS 5155 or IS:13095. Drilled as per IS:1538/ISO as directed by the Engineer-In-Charge complete for finished item of work but excluding taxes.

Manufacture Supply erection testing and joining at site of works and testing of MS Pipe of 150 mm dia. including jointing of individual pump riser to common header complete conforming to detailed specification including providing applying of epoxy coating ( 2 coat as per the drawing Including connection between existing of 100 mm dia Wall Thickness :- 8 mm complete for finished item of work including Comissioningbut excluding taxes.

Manufacture Supply erection testing and joining at site of works and testing of MS Pipe of 400 mm dia. including jointing of individual pump riser to common header complete conforming to detailed specification including providing applying of epoxy coating ( 2 coat as per the drawing Including connection between existing of 100 mm dia Wall Thickness :- 10 mm complete for finished item of work including Comissioning but excluding taxes.

Manufacture Supply delivery laying and Jointing of Single Chamber 100mm DI Kinetic Air Valve of PN-25 with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions on pipe line including supply of Air valve PN-25 Grade and with isolated DI Sluice Valve of PN-25 DI Specials to suit the pressure class of pipe Valve should be electrostatically powder coated from inside outside as directed by the Engineer-In-Charge. Size :100 mm dia complete for finished item of work including Testing and Comissioning but excluding taxes.

Instrumentation Providing Supplying Erecting commissioning & testing Ultrasonic flow meter Clamp on type comprising of following Clamp on type sensors having Degree of protection IP 68 suitable for MS pipeline of DN 200...4000 Temperature range –20...+80 degree C. Flow Transmitter with Twoline LCD display Degree of protection IP 65 Accuracy ± 1% of reading. Output Analog 420mA complete for finished item of work including Comissioning but excluding taxes.

Manufacture Supply Installing testing and commissoning of 5 HP Vaccume Pump DV 40 Coupled set pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10% 3 Ph 50 Hz A.C. Also providinginstallingtestingcommissioning of adequate capacity piping system with required fittings (elbows bends reducer valves strainer etc.) 5 HP DV 40 Coupled set pump.Vaccume Pumps flow 34, Pressure 400 complete for finished item of work but excluding taxes.

Supply and delivery erection of MS Flanges for MS Pipe fitting in Delivery side as per IS 1538,150mmx 15mm complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply and delivery erection of MS Flanges for MS Pipe fitting in Suction side as per IS 1538,400mm x 18mm complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel made out of No.14/16 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges.Supply of 1000A 4 Pole, 50kA Air Circuit Breaker electrically fixed Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection.-1no.Supply of 400A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted-3Nos. Supply of 32A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted-2Nos. Supply of 63A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted-2Nos.Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.-4Nos.supply and Run of 40mm x 6mm Alluminium strip (Cuurrent Carrying Capacity 350A) including cost of all accessories and labour charges etc., complete. (0.644Kgs/1Mtr). Supply and erection of 0-100 / 200 / 400 / 600 /1000 Analog Ammeter of size 96x96mm on existing box / panel board including connections etc., complete.Supply and erection of L.T. 3phase Digital multifunction energy meter with 3 lines LCD display for measuring all the parameters (voltage / Current / Power / frequency / power factor / kw / kwh / KVAR/ KVARH/) on existing box panel board including connections etc., complete.Supply and erection of selector switch for voltmeter / Ammeter on the existing box / panel including connections etc., complete.Supply and erection of LED indicator lamps on the existing box / panel board.Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing box / panel including connections etc., complete.Supply and fixing of three phase Electronic energy Meter, 415V AC,50 HZ as per IS13010 up to 40A range with 200% over load capacity complete with connections etc., complete on the existing board.Supply and fixing of 53 KVAR multi stage Capacitor bank with connection etc complete.Fabrication and tarnsportation of panel with No.14/16 guage CRCA sheet after 7 tank process including compartments and suitable for fixing above switch gears, Bus bars and metering equipment as per CPRI test certificate etc., complete for finished item of work but excluding taxes.

Supply and run of 2 of 400 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of pipeline work including Testing and Comissioning but excluding taxes.

Supply and run of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work including Testing and Comissioning and excluding taxes.

Supply and run of 10Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work including Testing and Comissioning but excluding taxes.

Electrical and Mechanical Works of 100HP VT PUMPSETS( 2+1 ) at Mungi Chowrasta to NIMZ Sangareddy segment. Supply, installation, testing & commissioning of Vertical Turbine pump motor set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity vertical solid shaft TEFC squirrel cage induction motor (with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1000 RPM along with column and bowl assembly, discharge head, base channel / RSJ etc. complete as per relevant IS M.O.C.: Impeller & Sealing Rings: CF8M, Bowl & Suction Bell: CI FG 260 IS: 210 with 2% Ni , Shaft with coupling: SS 410, Column Pipe: MS ERW, Mechanical seal (above 30 kw) ,Base Plate: MS, Line Bearing: Thordon, Suction Strainer: S.S. complete for finished item of work but excluding taxes. - 2+1 MECHANICAL Vertical Turbine Pumps/submerged vertical turbine pumps Design Manufacture supply Installing testing commissoning of Vertical Turbine Pumps of suitable rpm for following duty points as specified below conforming to IS: 1710 a Duty point discharge 7576 LPM b Duty point head: suitable to provide combined discharge at rated head as mentioned below. c These pumps should be suitable for parallel operation to deliver the required combined flow of LPM for 22 Hrs/Day continuous operation by running 2 pumps with 1 standby pump at Combined Duty point head 84m and as per relevant specifications for raw water application.With Inline Lubrication piping system with required fittings including strainer valves elbows bends etc Pump efficiency shall be as per HIS Curves 6.6 KV 3 Phase 50 Hz Vertical squirrel cage induction motor Design Manufacture supply erection testing and commissioning of 11KV 3 Phase 50 Hz Vertical squirrel cage induction motor suitable to the above pump. The motor shall be conforming to IS:325 IP-55 Class of protection TEFC/CACA type of enclosure Class -F insulation with a temperature rise limited to Class-B and as per the standard specifications.

Manufacture Supply and delivery erection testing and commissioning of 150 mm DI D/F Dual Plate Check Valves PN-25 Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG 400/15 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per requirement of dept.. Specification and Dimensions as per I.S 5312 or equivalent codes complete for finished item of work but excluding taxes.

Manufacture Supply and delivery erection testing and commissioning of 400 mm DI D/F Dual Plate Check Valves PN-25 Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG 400/15 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per requirement of dept.. Specification and Dimensions as per I.S 5312 or equivalent codes complete for finished item of work but excluding taxes.

Manufacture Supply and delivery erection testing and commissioning of DI D/F Sluice Valves of 150 mm did and PN-25 with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. 150mm complete for finished item of work but excluding taxes.

Manufacture Supply and delivery erection testing and commissioning of DI D/F Butterfly Valves of 150 mm dia,PN-25 following sizes with Equivalent grade as per I.S.3896-part 2 double eccentrically Disc. with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504 or BS 5155 or IS:13095. Drilled as per IS:1538/ISO as directed by the Engineer-In-Charge complete for finished item of work but excluding taxes.

Manufacture Supply erection testing and joining at site of works and testing of MS Pipe of 150 mm dia. including jointing of individual pump riser to common header complete conforming to detailed specification including providing applying of epoxy coating ( 2 coat as per the drawing Including connection between existing of 100 mm dia Wall Thickness :- 8 mm complete for finished item of work including Comissioning but excluding taxes.

Manufacture Supply erection testing and joining at site of works and testing of MS Pipe of 400 mm dia. including jointing of individual pump riser to common header complete conforming to detailed specification including providing applying of epoxy coating ( 2 coat as per the drawing Including connection between existing of 100 mm dia Wall Thickness :-10 mm complete for finished item of work including Comissioning but excluding taxes.

Manufacture Supply delivery laying and Jointing of Single Chamber 100mm DI Kinetic Air Valve of PN-25 with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions on pipe line including supply of Air valve PN-25 Grade and with isolated DI Sluice Valve of PN-25 DI Specials to suit the pressure class of pipe Valve should be electrostatically powder coated from inside outside for finished item of work as directed by the Engineer-In-Charge. Size :100 mm dia.complete for finished item of work including Testing and Comissioning but excluding taxes.

Instrumentation: Providing Supplying Erecting commissioning & testing Ultrasonic flow meter Clamp on type comprising of following Clamp on type sensors having Degree of protection IP 68 suitable for MS pipeline of DN 200...4000 Temperature range –20...+80 degree C. Flow Transmitter with Twoline LCD display Degree of protection IP 65 Accuracy ± 1% of reading. Output Analog 420mA complete for finished item of work including transportation charges, loading, unloading and stacking but excluding taxes.

ManufactureSupplyInstalling testing and commissoning of 5 HP Vaccume Pump DV 40 Coupled set pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10% 3 Ph 50 Hz A.C. Also providinginstallingtestingcommissioning of adequate capacity piping system with required fittings (elbows bends reducer valves strainer etc.) 5 HP DV 40 Coupled set pump.Vaccume Pumps flow 34, Pressure 400 complete for finished item of work including transportation charges, loading, unloading and stacking but excluding taxes.

Supply and delivery erection of MS Flanges for MS Pipe fitting in Delivery side as per IS 1538,150mm complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply and delivery erection of MS Flanges for MS Pipe fitting in Suction side as per IS 1538, 150mm complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel made out of No.14/16 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials & labour charges.Supply of 1000A 4 Pole, 50kA Air Circuit Breaker electrically fixed Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection.-1no.Supply of 400A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted-3Nos. Supply of 32A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted-2Nos. Supply of 63A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted-2Nos.Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.-4Nos.supply and Run of 40mm x 6mm Alluminium strip (Cuurrent Carrying Capacity 350A) including cost of all accessories and labour charges etc., complete. (0.644Kgs/1Mtr). Supply and erection of 0-100 / 200 / 400 / 600 /1000 Analog Ammeter of size 96x96mm on existing box / panel board including connections etc., complete.Supply and erection of L.T. 3phase Digital multifunction energy meter with 3 lines LCD display for measuring all the parameters (voltage / Current / Power / frequency / power factor / kw / kwh / KVAR/ KVARH/) on existing box panel board including connections etc., complete.Supply and erection of selector switch for voltmeter / Ammeter on the existing box / panel including connections etc., complete.Supply and erection of LED indicator lamps on the existing box / panel board.Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing box / panel including connections etc., complete.Supply and fixing of three phase Electronic energy Meter, 415V AC,50 HZ as per IS13010 up to 40A range with 200% over load capacity complete with connections etc., complete on the existing board.Supply and fixing of 53 KVAR multi stage Capacitor bank with connection etc complete.Fabrication and tarnsportation of panel with No.14/16 guage CRCA sheet after 7 tank process including compartments and suitable for fixing above switch gears, Bus bars and metering equipment as per CPRI test certificate etc., complete for finished item of work but excluding taxes.

Supply and run of 2 of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply and run of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work including Testing and Comissioning but excluding taxes.

Supply and run of 10Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work including Testing and Comissioning but excluding taxes.

Construction of New Substation Work at Chalki Intakewell and Mungi Chowrastha. Supply and Transportation of 500KVA TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per IS : 1180 OCTC with Level - I with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes: Kirloskar / PETE / Esennar / Voltamp / Crompton / ABB / Schneider// SSE . 1.Quantity : 12. Rated KVA : ........KVA3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed7. Cooling : ONAN8. Temp Rise : 40⁰C in oil, 45⁰C by resistance9. Vector Group: Dyn 1110. Primary Connection : Delta11. Nominal Voltage / Current : ______12. Highest system Voltage: 12000V13. Primary Frequency :50 HZ +/- 3%14. Number of Phases : 3 15. Primary wires: 316. Secondary connection : Star17. Secondary Volts / Current : 433V18. Secondary phases : 319. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps 21. Terminal arrangement. a.HV: HT terminal box as per the site condition. b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable 22. LV:One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] --- as per IS 24. Total Losses at 100% Loading [Watts] [Max]--- as per IS 25.Percentage Impedance at 75 deg. C at ----- as per IS 26. No Load current: Less than 2% of full load current. 27. Standrad Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs:Two c. Off-circuit tap switch :One d. Earthing Terminals :Two e. Radiators ( Attachable) :Adequate f. Explosion vent with Diaphragm :One g. Conservator with Drain plug:one h. Oil filling hole with cap :One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10Cm dial thermometer(Rigid stem type) 500 KVA Copper Wound Transformer, complete for finished item of work but excluding taxes.

Supply and Transportation of 1000KVA TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per IS : 1180 OCTC with Level - I with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes: Kirloskar / PETE / Esennar / Voltamp / Crompton / ABB / Schneider// SSE . 1.Quantity : 12. Rated KVA : ........KVA3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed7. Cooling : ONAN8. Temp Rise : 40⁰C in oil, 45⁰C by resistance9. Vector Group: Dyn 1110. Primary Connection : Delta11. Nominal Voltage / Current : ______12. Highest system Voltage: 12000V13. Primary Frequency :50 HZ +/- 3%14. Number of Phases : 3 15. Primary wires: 316. Secondary connection : Star17. Secondary Volts / Current : 433V18. Secondary phases : 319. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps 21. Terminal arrangement. a.HV: HT terminal box as per the site condition. b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable 22. LV:One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] --- as per IS 24. Total Losses at 100% Loading [Watts] [Max]--- as per IS 25.Percentage Impedance at 75 deg. C at ----- as per IS 26. No Load current: Less than 2% of full load current. 27. Standrad Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs:Two c. Off-circuit tap switch :One d. Earthing Terminals :Two e. Radiators ( Attachable) :Adequate f. Explosion vent with Diaphragm :One g. Conservator with Drain plug:one h. Oil filling hole with cap :One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10Cm dial thermometer(Rigid stem type) 1000 KVA Copper Wound Transformer , complete for finished item of work but excluding taxes.

Supply, Installation, Testing and Commissioning of OLTC for transformers with RTCC etc., complete for finished item of work but excluding taxes. 1000 KVA & 500 KVA Copper Wound Transformer , complete for finished item of work but excluding taxes.

Supply, Fabrication, Transportation and erection of DP structure made with 2 Nos 175mm x 85mm ( ISMB Modified ) or equivalent about 30'-0 length / 9.1 mtrs length RS joist pole erection of the same Including excavation of pit in all kinds of soil including breaking stones, concreting with (1:3:6) mixture base plate, coil earthing back filling, 1:2:4 for couping including red oxide primary painting and two coats of aluminium painting etc., complete as required with following as per CEIG norms, complete for finished item of work but excluding taxes.

Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft and at the top and pedastal of above size with brick masonry duly plastered with 20mm thick including watering etc., complete for finished item of work but excluding taxes.

Providing CTPT plinth 600mm x 600mm x 2.1 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft and at the top and pedastal of above size with brick masonry duly plastered with 20mm thick including watering etc., complete for finished item of work but excluding taxes.

Supply of 95 Sqmm 3 Core HT XLPE (E) insulated 11000 V grade armoured Cable, as per IS specification confirming to IS 7098/II/85 with latest amendments. Makes : Torrent / Unicab / Universal / Polycab / Havells / KEI / Gloster, complete for finished item of work but excluding taxes.

Supply of 1600A 4 Pole, 50kA, electrically drawoutAir Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection , complete for finished item of work but excluding taxes. Makes : Siemens (Sentron- 3W) / LK U Power / Schneider Master Pact / ABB Emax / Legrand DMX3 / BCH / Eaton / Havells

Supply of 1000A 4 Pole, 50kA, electrically drawoutAir Circuit Breaker Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit and earth fault Protection, complete for finished item of work but excluding taxes. Makes : Siemens (Sentron- 3W) / LK U Power / Schneider Master Pact / ABB Emax / Legrand DMX3 / BCH / Eaton / Havells

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. Long connected with reducer providing G.I funnel with mesh enclosed in C.C/brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe gig earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) , complete for finished item of work but excluding taxes.

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc., as per IS specification 732/1982 (Part II) complete for finished item of work but excluding taxes

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe gig earth connection from electrode through flange with all accessories and labour charges as per IS specifications 732/1982 (Part II). , complete for finished item of work but excluding taxes.