Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹51.9 L+₹4.9 L (10.4%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹53.1 L+₹6.0 L (12.8%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
30 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Aman Bhardwaj
Military Engineer Service Garrison Engineer (AF) No.1 Air Force Station No.1 Jamnagar 361 003
REPAIR TO MISC B/R WORKS AT AF STN SAMANA
2023_MES_630867_1
8261/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Samana
Please Refer Tender Documents
6 documents required · 6 mandatory
₹500
GE (AF) Jamnagar No. 1
₹90,000
Yes
20 Feb 2024
2 Dec 2023
6 Jan 2024
2 Dec 2023
30 Dec 2023
16 Dec 2023
Amount
M&L for complete removal of existing water proofing treatment including bedding / padding etc. complete of any thickness laid over RCC Roof / chajja, cleaning and washing of roof / chajja with water to remove dust etc as preparation to receive treatment, brooming down or steel wire brushing, scraping down smoke soot, mouls, moss and efflorescent salts and treating oil and greasy spots complete all as specified and as directed.
M&L for cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) in roof pading, coving,filling and mass concrete complete laid to required slope as directed and to be finished even and smooth (without using extra cement) all as specified and directed
M&L for screed bed / plastering 10 mm thick on concrete surface in CM 1:4, finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer's instructions complete all as specified and directed Note : Supply only WPC will be measured & paid separately.
Supply only Liquid water proofing compound.
M&L for cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied bituminous primer @ 0.40 Kg/Sqm conforming to IS : 3384 and applying a layer of APP based polymeric membrane not less than 3mm thick weighing not less than 3.50 Kg/Sqm, reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) and upper side of membrane thermally insulated with white gravel finish uniformly embedded during manufacturing process. It shall be laid by torch application having side over lap 100 mm and at the end 100 mm, all overlaps and joints shall be sealed by torch application, complete all as specified and as directed.
M&L for waterproofing treatment by water proofing liquid after proper cleaning of the new surface free of dust and applying the first coat (By Brush only)@ 4 Sqmt/Liter , allowing it to dry for 24 hrs and applying the second coat over it @ 4Sqm/Litre on horizontal and vertical surface complete all as specified and directed. Note: Application shall be carried out through authorised applicator of manufacturer only and as per guidelines of Manufacturer strictly.
S&F in repairs anodised aluminium snap grid frame work for false ceiling ( Size of grid 605 x 605mm) all as specified.
S&F in repair of mineral Fiber Acoustical suspended ceiling sheets with beveled regular edge tiles laid over existing grid system the tiles should have humidity resistance (RH) of 99% , NRC 0.5, Light reflectance > 87% , Thermal conductivity k=0.052-0.057 w/m K, colour white, fire performance UK class 0/Class 1 (BS 476 pt -6 &7) inmodule size of 600x600x20mm, suitable for green building applicatin, with recycled content of 30% complete all as specified Make : Armstrong or equivalent (Tile shall be model name classic Lite & Grid system shall be model Name suprafine XL 15 exposed or equivalent )
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
S&F 600x600mmx4mm thick false ceiling of Non esbestos fibre cement building boards (E Board) with and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm . The aluminium frame work will be supported on side wall with the use of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, including two coats of synthetic enamel paint over a coat of pink primer complete all as specified directed by the Engineer-in-Charge.
S&F Gypsum Board 12mm thick in ceiling fixed with screw, any sunk or raised moulding as per manufacturers instructions and applying two coat of OBD over two coat of wall care putty.
S&f Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Supply & Fix in repair 06 mm thick plain, multicavity poly carbonate sheet (coloured) in roof covering, fixed with and including aluminium fillets at joints and aluminium angles at the end, fixed with self drilled screws and standard fittings, fixtures and accessories complete all as specified and as per manufacturer's instructions.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S & F Steel work in tubular/rectangular MS Pipe such as vertical post,trusses, rafter, purlins etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240complete all as specified and directed Engineer-in-Charge
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to FE-410-W( Gde-E-250 )quality -A complete all as specified and directed Engineer-in-Charge
S&F Rolled mild steel in joist,channel, angles or tees with web and flanges cut to shape drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates, riveting etc. n.exc 10 kg each brackets conforming to FE-290 Gde-E-165 )complete all as specified and directed by Engineer-in-Charge
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces, exc 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide all as specified and as directed.
Demolition of brick / stone / PCC block masonry / RCC Jalli build/fixed in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.
M&L for providing precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.
M&L precast cement concrete Type C0 1:3:6 (12.5mm graded aggregate)louvres and jallies, 35mm thick (mea sured solid), in cluding all mouldings ,set in cement mortar 1:6, complete all as specified and directed.
Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 km but n.exc 2 Km, complete all as spd and directed
M&L for rendering 15 mm thick on stone masonary/brick / concrete surface of walls in cement plaster 1:6 complete all as spd and directed
M&L for preparing surafces plastered or unplastered of walls and applying two coats of oil bound distemper, white or tinted to match with existing work complete all as specified and directed
M&L for rendering 15 mm thick on stone masonary/brick / concrete surface of walls in cement plaster 1:4 complete all as specified and directed
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to a distance exc 1.5 km but n.exc 2 Km complete all as spd and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.
M&L Rendering 10mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing for skirting/dado etc complete all as specified and directed.
M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:6 complete all as spd and directed
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as spd and directed
M&L for Non skid, coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc laid over and pointed with coloured cement to match the tiles complete all as spd and directed
M&L for Non skid, ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors /skirting etc laid over and pointed with coloured cement to match the tiles complete all as spd and directed
M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/dado /skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd and directed
M&L Green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as spd and directed
M&L 15 -18mm thick granite stone slab of any type (cut, table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms and like , bedded & jointed with grey cement slurry & pointing with coloured cement using marble dust with admixture of pigment to match with marble shade; laid over complete all as spd and directed
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as spd and directed.
M&L Roof tiles, Mangalore pattern, interlocking at side joints, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as spd and directed
M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed.
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) of any descrition such as Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregates as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, culvert, cover slabs (for man holes/drain etc.) and similar articles with plain faces including any type of formwork /moulds etc complete all as spd Note:- Reinforcement steel will be measured & paid separately
M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregates as chajja, fins, lintels and similar articles with plain faces including any type of formwork /mould etc complete all as spd Note:- Quoted rate deemed to carryout work at height upto 8.00 m & Reinforcement steel will be measured & paid separately
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Formwork to rough finished surfaces of concrete of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed by Engineer-in-Charge
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as spd and directed
M&L for Applying coating (02 coats) of Pidifin 2k (of Make Dr Fixit or equivalant as approved by GE) @ (not less than) 1.54 kg/ Sq.m in two coats on sunken surfaces of toilet & bathroom and similar situation all as recommended by manufacturers complete over and including 10mm thick screed bed in cement sand mortar 1:4, finished even and smooth with using extra cement including mixing of liquid water proofing compound as per manufacturer's instructions, all as specified and directed by Engineer-in-Charge
M&L for cement concrete type E-2 ,1:5:10 (using 40 mm graded aggregate) as in foundation filling and mass concrete etc complete all as specified and directed
S&F in repairs 60cm long, 40mm dia Tubes, 'medium grade', galvanised, with all fitting; laid in wall for sunken foor complete all as spd and directed
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spd and directed
S&F in repairs 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spd and directed
S&F in repairs 32mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
Cutting chases, pinning in, making good to facings on stone concrete, block or slab wall, where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as spd and directed
S&F in repair 15mm size angular Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spd and directed
S&F in repair 15mm dia Stop valves, cast copper alloy,fancy type, chromium plated with long shank and cup (concealed type)screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spd and directed.
S&F in repair 15mm dia size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as spd and directed
S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spd and directed
S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge
S&F in repair Chromium Plated Grating doom 100mm dia with or without hole complete all as specified and directed.
S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including waste fitting and union complete all as specified and directed by Engineer-in-Charge
S&F in repair Vitreous Cliina wash basin, angle back, size 400 x 400 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, 32 mm dia brass waste coupling and, waste fitting and union complete all as specified and directed by Engineer-in-Charge.
S&F in repair vitreous china wash basin, white, Table top, size 540 mm x 360 mm x 115mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including waste fitting and union complete all as specified and directed by Engineer-in-Charge. ( Make Cera - Colmax or equivalent of makes as specified )
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as spd and directed
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap incl water closet seat cover of plastic,jet etc.complete incl necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge
S&F in repair vitreous china two piece wall hung extended EWC white with CI 'P' or 'S' trap incl attached cistern, water closet seat cover of plastic, etc.complete incl necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge. ( Make Cera - Cat No. : S1044144MW or equivalent as specified)
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer-in-Charge
S&F in repair 10 Litre capacity PVC symphonic action type flushing cistern, duel flush type (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as spd and directed
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as spd and directed
S & F in repair Low density polyethylene pipes (LDPE) 32mm dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc
S&F in repair brass chromium plated shower rose 100 mm of size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge
S & F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as spd and directed
S & F in repair Tubular towel rail, 20mm dia, D type, 600mm long between flanges brass chromium plated complete all as spd and directed
S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed by Engineer-in-Charge
S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.
S&F in repair PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed on walls or floors including clamp and taking down complete all as specified and directed
S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge
S&F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on walls or floors including clamp complete all as specified and directed
S & F in repairs 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
M&L in repairs for 75 mm dia of PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge
Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed Engineer-in-Charge.
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed
S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.
S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.
S&F 125 mm in size aluminium handles, cast type, anodized complete all as specified & directed.
S&F in repairs aluminium three track Powder coated of any color ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed by Engineer-in-Charge
S& f in repairs Anodised aluminium frame for doors, windows, ventilators powder coating of any colour (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F in repairs Anodised aluminium door shutters,powder coating of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F in repairs aluminium window and ventilator shutters or aluminium partition, powder coating of any colour (Thickness or powder coating not less than 50 micron),fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F in repairs Anodised aluminium window and ventilator shutters, powder coating of any colour (Thickness or powder coating not less than 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.
S&F in repairs 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality (plain/ floated/ frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square n.exc. 0.5 sqm in each pane complete all as specified & directed.
S&F 4 mm thick sheet glass, ordinary quality (plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square exc. 0.5 sqm in each pane complete all as specified & directed.
S&F in repairs Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.
M&L for Cutting holes in brick/stone walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, Type B-1 as required ,depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick but not exc one brick complete all as specified and directed.
S&F in repairs Door closer hydraulically regulated, designation No. 2, aluminium(die cast) body, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified & directed.
S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F in repairs 100 mm size mild steel body Mortise lock, vertical type, with 4 brass liver, fixed to aluminium door complete.
S&F in repair MS louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti for adjusting the louvers fixed in Aluminium ventilators with screws etc complete all as specified and directed by Engineer-in-Charge
S & F in repair floor door stopper 140mm size (overall length of cover plate) of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge
Dismantling Stone slabs and tiles of any description or thickness in floors,aprons etc laid, bedded and pointed in any mortar including removal of debries from the premise complete all as spd and directed.
M&L for Rubber moulded chequered cement concrete tile with grey cement and pigment (of approved tint) of size 30 cm x 30 cm x 25 mm thick , set, jointed and pointed in neat cement slurry complete.
M&L for outdoor coloured vitrified paving tiles, of size 300 mm x 300 mm x 8 to 10 mm thick as in floors etc laid over and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including laying over 25mm thick sand cushioning , including dismantling and taking down/out old unserviceable paver block complete all as specified and as directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15cm thickness below or above ground level, all as specified and as directed.
M&L for providing cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in fdn filling and mass concrete etc complete.
M&L for providing cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, coping etc, complete all as specified and directed.
M&L for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in floor / hard standing/Path ,etc complete all as specified & directed.
M&L for 75 mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in plinth protection etc complete all as specified and directed.
Jagdamba Engineering
Pooja Enterprise
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .