Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-Finance VILLAGE CHAATER PO JUGAHAN TEHSIL SUNDERNAGAR DISTT MANDI HP | L1 | Accepted-Finance Accepted | |
| 2 | L2₹10.8 L+₹1.1 L (10.8%)Rejected-Finance NO 1 HPPWD DIVISION DHARAMSHALA HIMACHAL PRADESH | L2 | Rejected-Finance Rejected | |
| 3 | L3₹10.5 L+₹72,970 (7.47%)Rejected-Finance CONTR VILLAGE BIHALI PO LARJI TEHSIL SAINJ DISTT KULLU HP | KULLU | HIMACHAL PRADESH | 172002 | L3 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | Mohan Lal L2 | Dinesh L3 | Bhadur Singh L1 |
|---|---|---|---|---|---|---|
| 1.00 | Suppliying of star delta control panel of 10 HP capacity consisting of suitable motor starter, ampere meter, voltammeter, OCB / MCB / MCCB. ON/OFF push button, circuit breaker, voltage monitor relay, bus bar chamber, capacitor & preventers per technical specification sheet attached complete in all respect. | 1 | Each | 28,000 ₹28,000 | 27,500 ₹27,500 | 27,000 ₹27,000 Lowest |
| 2.00 | Providing bal bearing SKF make no.6315C-3 BECBM complete in all respect and as per the entire satisfaction of Engineer In-Charge | 4 | Each | 13,000 ₹52,000 | 12,900 ₹51,600 | 12,000 ₹48,000 Lowest |
| 3.00 | Providing bal bearing SKF make no. 6317C-3 complete in all respect and as per the entire satisfaction of Engineer In-Charge | 4 | Each | 17,000 ₹68,000 | 17,000 ₹68,000 | 16,500 ₹66,000 Lowest |
| 4.00 | Providing bal bearing SKF make no.Nu207 ECKP/C-3 complete in all respect and as per the entire satisfaction of Engineer In-Charge | 4 | Each | 9,200 ₹36,800 | 8,500 ₹34,000 | 8,000 ₹32,000 Lowest |
| 5.00 | Providing bal bearing SKF make no.6211/VA 201 complete in all respect and as per the entire satisfaction of Engineer In-Charge | 1 | Each | 9,500 ₹9,500 | 9,400 ₹9,400 | 8,800 ₹8,800 Lowest |
| 6.00 | Providing bal bearing SKF make no. 6311 2RS1/C-3 complete in all respect and as per the entire satisfaction of Engineer In-Charge | 1 | Each | 9,200 ₹9,200 | 8,700 ₹8,700 | 8,000 ₹8,000 Lowest |
| 7.00 | Providing stain less steel pin & bush with nut and bolt to coupling RB 178/2 complete in all respect and as per the entire satisfaction of Engineer In-Charge | 60 | Each | 400 ₹24,000 | 350 ₹21,000 | 330 ₹19,800 Lowest |
| 8.00 | Disassembling of break down, MEI make ATS oil immersed starters, of 170 HP capacity by mean of manually, degreasing, cleaning, brushing of all dirt and rusted part of starter with chemical rust cleaner to make the part smooth and clean of both the starters and reassembling by making all the necessary connections with thimbles, nuts and bolts complete in all respect and as per the entire satisfaction of Engineer In-Charge | 2 | Job | 12,500 ₹25,000 | 15,000 ₹30,000 | 11,000 ₹22,000 Lowest |
| 9.00 | Providing approved make copper contact point sets male and female including other allied assesrious for ATS starters in including necessary screw nuts and bolts complete in all respect and as per the entire satisfaction of Engineer In-Charge | 2 | Set | 1,08,000 ₹2,16,000 | 1,10,000 ₹2,20,000 | 1,02,000 ₹2,04,000 Lowest |
| 10.00 | Providing gland packing of 10mm size complete in all respect and as per the entire satisfaction of Engineer In-Charge | 1 | Kg | 1,500 ₹1,500 | 1,500 ₹1,500 | 1,250 ₹1,250 Lowest |
Tender Value
₹9.6 L
EMD Value
₹19,183
Closing Date
4 Sept 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE Rampur
JSD Rampur
Restoration of Rain damages to various LWSS under JSSD Rampur
2025_HPIPH_113070_1
No.EE-JSD-RMP-E-ten/-5109-5159 dt 26.08.2025
Open Tender
Civil Works
Item Rate
30 days
Rampur
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹19,183
23 Sept 2025
27 Aug 2025
5 Sept 2025
27 Aug 2025
4 Sept 2025
27 Aug 2025
Amount
Suppliying of star delta control panel of 10 HP capacity consisting of suitable motor starter, ampere meter, voltammeter, OCB / MCB / MCCB. ON/OFF push button, circuit breaker, voltage monitor relay, bus bar chamber, capacitor & preventers per technical specification sheet attached complete in all respect.
Providing bal bearing SKF make no.6315C-3 BECBM complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing bal bearing SKF make no. 6317C-3 complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing bal bearing SKF make no.Nu207 ECKP/C-3 complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing bal bearing SKF make no.6211/VA 201 complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing bal bearing SKF make no. 6311 2RS1/C-3 complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing stain less steel pin & bush with nut and bolt to coupling RB 178/2 complete in all respect and as per the entire satisfaction of Engineer In-Charge
Disassembling of break down, MEI make ATS oil immersed starters, of 170 HP capacity by mean of manually, degreasing, cleaning, brushing of all dirt and rusted part of starter with chemical rust cleaner to make the part smooth and clean of both the starters and reassembling by making all the necessary connections with thimbles, nuts and bolts complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing approved make copper contact point sets male and female including other allied assesrious for ATS starters in including necessary screw nuts and bolts complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing gland packing of 10mm size complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing new MS bearing puller of approved make such as DE NEERS including nut and boltscomplete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing and filling of heavy duty transformer oil to star delta starter & oil circuit breaker at site of work complete in all respect and as per the entire satisfaction of Engineer In-Charge
Disassembling of break down, KSB Make centrifugal pump set, of 170HP capacity by mean of manually, degreasing, cleaning, brushing of all dirt and rusted part of PUMP with chemical rust cleaner to make the part smooth and clean of both the pump sets and reassembling and making alignment of pump set complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing laying suitable size of 95mm2 Copper PVC insolated armoured power cable 3 core confirming to BIS 1554 (part-1) 1998 or latest with up to date amendments Polycabe, Siemens, Gloster, Iccc, L&T, Haveles make from meter of HPSEB to OCB and OCB to bus bar switch and starters including all other electrical equipments, accessories such as thimble, flexible pipe, solder, nuts, bolts, cable gland, etc
Providing copper thimble 415 Amp of approved make such as Hevals, Kilburn, Siemens and L&T
Providing stain less steel pin & bush with nut and bolt to coupling RB 178/2 complete in all respect and as per the entire satisfaction of Engineer In-Charge
Re-winding of 40HP electric induction motor having 2900 RPM confirming to IS-325-1978 with upto date ammendments read with IS 900-1972 suitable for three phase electric supply and complete with replacement of nuts and bolts and to the enitre satisfaction of Engineer-in-charge .
Providing and fixing of ball bearing SKF 6312 C3 complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing and fixing MCB/Oil circuit breaker of 100 Amps capacity of reputed make such as Kilburn/ L&T/ L&K/MEI/Standard make on in coming feeder for motors offered by the tenderer conforming to BIS 2516-1985 latest with upto date ammendments with neutral linked under voltage release complete in all respect and as per the entire satisfaction of Engineer In-Charge
Suppliying of star delta control panel of 40 HP capacity consisting of suitable motor starter, ampere meter, voltammeter, OCB / MCB / MCCB. ON/OFF push button, circuit breaker, voltage monitor relay, bus bar chamber, capacitor & preventers per technical specification sheet attached complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing M/S pin &bush type coupling RB-178 to both the pump set of 40 HP capacity complete in all respect and as per the entire satisfaction of Engineer In-Charge
Providing stain less steel pin & bush with nut and bolt to coupling RB 178/2 complete in all respect and as per the entire satisfaction of Engineer In-Charge
Erection, Commissioning, and testing of pump set including carriage of pump set pump house to work shop and back complete in all respect and as per the entire satisfaction of Engineer In-Charge
Mohan Lal (BID ID -550420)
Dinesh (BID ID -550101)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .