PROVISION OF 04 X TYPE V MD ACCN FOR CIV OFFRS AT JODHPUR

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 20

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 21

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 22

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 25

Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT AND HANDSTANDING" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 26

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 28

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 29

Lump sum price worked out by the contractor for "FENCING AND GATE" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 31

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY AND HOT WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 33

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 34

Sch 'A' PART-XI (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL WATER SUPPLY S&F 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed

S&F 15mm bore CP central hole basin mixer popup waste system with 450mm long copper pipe and brass nuts ISI marked

S&F CP wall mixture 3-in-1 system including 1.50m long tele shower and overhead shower of size 150x150mm with WF

S&F over head shower rose 150x150mm of ABS body chrome plated with grey face plate & with arm having swivel joint cromium plated best quality

S&F 15mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout all as per sample

S&F health foucet with 1200mm long flexible mild steel tube 80mm dia with wall hook and complete all as specified and directed of Make Jaguar or equivalent make and as approved by GE.

INTERNAL ELECTRIFICATION S&F decorative mirror type LED tube light fitting 1x7 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed.

S&F decorative box type LED tube light fitting 1x20 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed.

S&F 9 watt LED Bulk Head light / Porch light with fitting complete fixed in ceiling/wall complete all as specified and directed

S&F energy saving 9 watt LED Bulb all as specified and directed.

S&F modular type T.V. Socket Outlet, including M.S. Box of size 100x100x65 mm with cover plate complete all as specified and directed

S&F modular type Telephone Socket Outlet, including M.S. Box of size 100x100x65 mm with cover plate

S&F MCCB Distribution board suitable for 100 Amp TPN 4 way, concealed flush to wall for mounting MCCBs and MCBs , factory made, fabricated out of CRCA sheet not less than 1.20mm thick fitted with DIN channel , neutral link ,DBs shall be semi glossy finished with epoxy polester based poeder paint process to ensure smooth finish and protection against corrosion atmosphere, the DBs shall be double door type with hinged door with locking arrangement. the DBs shall be of same make as MCCBs, DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all ways specified . the DBs shall be IP 43 protection class complete all as specified and directed

S&F Modular type Box incl. AC Socket with 25 Amp SPN MCB.

S&F heavy duty, exhaust fans of 300 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan

S&F exhaust fans of 250 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan.

S&F ceiling fans 1400mm sweep energy efficient five star rating BLDC technology incl down rods and connecting up with 3 runs of 1.5 sq mm, single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors IS 694 marked, from ceiling rose to fan omplete all as specified and directed.

S&F 5 watt LED recess mounted porch light all as specified and directed.

S& F Prepaid Electronic Energy meter 10-60 Amps, counter display, single phase, 230 Volt, 50Hz

S&F MCBs/MCCBs, IS-60898 marked of the undermentioned type and rating and fixing in DBs (DBs shall be measured & catered separately in respective Schedule :-

MCB SP 6 to 32 Amp, 10 KA

MCB SPN 40 /32 Amp, 10 KA

FENCING & GATE M&L for steel gate 1.8 meter wide and 1.25m high in wicket gate including pillars in brick/stone masonary including excavation and earthwork in any type of soil, plastering, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifed & directed as shown on Drg No CEJZ/TD/06 Sht 1/2 & 2/2.

M&L for steel gate 2.0 meter wide and 1.25m high in wicket gate including pillars in brick/stone masonary including excavation and earthwork in any type of soil, plastering, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifed & directed as shown on Drg No CEJZ/TD/06 Sht 1/2 & 2/2.

M&L for steel gate 5.5 meter wide and 1.25m high in double leaf including pillars in brick/stone masonary including plastering,distempering, excavation and earth work in any type of soil, wheel track, wheel and painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifed & directed as shown on Drg No CEJZ/TD/06 Sht 1/2 & 2/2

M&L for machine pressed precast concrete interlocking coloured block of 60 mm thick, M-35 grade (IS-15658-2006 marked) & rubber finished complete all as specified and directed.

Forming embankment including (or lowering) earth, spreading in layers n exc 30 cm thick, watering, ramming/rolling and finishing to required size, shape etc n exc 1.50 meter high from base including supply of approved soil brought from outside MD land involving any lead complete all as specified and directed.

M&L for marking 2.5 mm thick centre line, side line, stop line, dashes, arrows, brackets & similar work on road surfaces as per IRC pattern with thermo plastic paint of approved quality & make with 8% glass beads laid at temperature of 160 degree centigrade with a special applicator machine complete.

EXTERNAL ELECTRIFICATION Supply and laying 40 to 50 mm thick roughly hammer dressed Jodhpur stone slab cover 25 to 30 cm wide and not less than 60 cm long dry laid, abutting each other with gap between adjacent slabs not exceeding 10mm for protection of underground cable complete all as sepcified.

S&F LED street light 45 watt IP 65 with GI pipe 50 Sqmm light grade upto 1.5 mtr with nuts, bolts, GI clamps and all as directed by Engineer in Charge

S&F looping box of size 300 x 200 x 150mm factory made consisting of 3.15 mm thick MS sheet and AL bus bar 3 phase 4-wire system of capacity 200 A, MCB of capacity 6 Amp 10 KA braking capacity and proper locking arrangement and opening for incoming and outgoing cable all as specified and directed by Engineer in Charge

S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 10 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT 5700-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistaranded copper conductor sheathed cable of size 1.5 SQMM fixed with & copper conductor sheathed cable of size 1.0 SQMM fixed with & including bracket made of GI Pipe 25mm bore light grade , 1.5 Mtr long bent to shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed.

Supplying, install and errect in true vertical position steel tubular swaged welded pole, type 410, SP-31, 9.00 mtr long complete, conforming to IS-2713 part-II, type 410 SP-55, complete with cast iron/MS base plate 6mm thick and of size 300x300mm, finial taper, pole cap, bolts, nuts, washers & screws etc. pole made out of ERW M.S tubing including of holes required Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting six signal red and yellow colour bands alternatively from lower portion of exposed pole starting from plinth block, each band of 300mm height at 300mm spacing, painting pole number, letters/figures by black paint complete all as specified and directed.

Supply and install commissioning and testing of factory made cubical type floor mounted out door panel weather proof fabricated out of with MS sheet 16 SWG and angle iron frame (50x50x6mm) provn of frount and rear door shutter with locking arrangment complete duly painted with powder coated paint over a coat of primer provn of PCC founation as directed by Engineer in Charge complete comprising of following (for main panel) all as speicifed and directed :-

Supply and install commissioning and testing of factory made cubical type floor mounted out door panel weather proof fabricated out of with MS sheet 16 SWG and angle iron frame (50x50x6mm) provn of frount and rear door shutter with locking arrangment complete duly painted with powder coated paint over a coat of primer provn of PCC founation as directed by Engineer in Charge complete comprising of following all as speicifed and directed :-

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level, the earth electrod surrounded by adequate quantity of charcoal dust and salt to a packet thickness of 15 cm on all sides and including GI earth lead wire 4 mm dia bolted (with GI nuts, bolts & check nuts) and rivetted to earth plate electrod at one end and connected to main switch board/DB's at the other, earth wire protected by and incl GI pipe 15 mm dia(medium grade) from top of electrod to main switch board (upto 7.50 meter long) and also incl watering pipe GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrod complete with earth pit in PCC 1:2:4 type B-0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation & earth work etc all as shown on electrical plate No. 3 of SSR Part-I, complete all as specefied & directed.

M&L for Earthing of galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the plate not less than 1.5 metre below normal ground level connected to GI earth strip 25 x 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or Steel and earth strip protected by GI protection pipe light grade 40 mm (up to 7.5 Mtr ) and as shown in electrical plate No. 3 of SSR Part-I and connected to earthing test point including filling of alternate layer of charcoal or coke and salt around the electrode, necessary earth work, in any type of soil, PCC 1:2:4 type B1 using 20mm graded stone aggregate, funnel, GI watering pipe 20mm dia (light grade), 50mm thick RCC cover reinforced with 8mm dia CTD bars @ 150mm C/C both ways with 2 Nos. 10mm dia 150mm long MS handle emboded in to slab, wire mesh, etc complete and testing on completion all as specified and directed.

EXTERNAL WATER SUPPLY AND HOT WATER SUPPLY Supply, installation, connecting and testing sluice valve,non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 80 mm ISI marked (IS:14846:2000) having S.S spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc complete all as specified and directed.

S&F cast iron Non Return Valve flanged end of size 80mm dia with all fitting and accessoreis as specified and directed .

Supply, install , tset and commissioning of manufacturer's factory assembled and tested electric driven Monoblock/Centrifugal pump set of capable delivering 13.4 LPS at 12 meter head comprising of horizontal split casing pump single/multi stage CI body with CI impellers operating at 36000 RPM coupled directly to a electric driven 415 V, 3 phase motor 50 Hz, 3600 RPM not less than 3 HP (Work 1.5 WHP) complete mounted on common MS base frame and foundation of the pump sets including PCC faoundation, MS bolts with nuts abd anti-vibration pads complete all as specified and directed. Make:- Crompton Model: MIQ 52C or equivelent make as per Appx 'C'.

S&F DOL 3 phase 50 Hz starter in sheet steel enclosure type MK2 suitable for 3 HP Monoblock/centrifugal pump set complete all as specified and directed

M&L for valve Pit chamber of size 60x60x60 cm (internal dimension) one brick thick wall in CM 1:4 on 100mm thick PCC 1:4:8, type D2 (40mm graded aggregate) as in foundation, 15mm thick rendering in CM 1:4 internally, externally upto 15 cm below ground level, providing valve pit cover made out of 3 mm thick MS sheet/plate welded with 50x50x65mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long embedded in PCC 1:2:4 type B1 (20 mm graded aggregate) block of size 230/200/100mm and provision of hinges, handles and locking arrangement including 2 coats of anti corrosive paint over a coat of red oxide zinc chrome primer complete

Supply, installation, testing and commissioning of Solar Water Heating System indirect type with heat exchange provision of capacity 100 litre with electric backup heater of 3KW capacity per day at temprature 60 degree centigrade to 80 degree centigrade as per manufacturer's design suitable flat plate collectors having insulation of rock wool/mineral wool 50mm thickness at bottom and 25mm thickness on sides with toughened/tempered glass of 4mm thick and cladding with aluminium sheet 26 SWG, Insulated stainless steel Hot water storage tank non pressure capacity as per manufacturer's design of suitable gauge thick stainless steel plate ( having insulation of rock wool/mineral wool 100 mm thick and cladding with aluminium sheet 24 SWG), Provisions of electrical back up with minimum 3 KW heating element , Heat exchanger shall be cage type and made of stainless steel tube, and Rotational moulded polyethylene Cold water storage tank of capacity of 250 Ltr (cylindrical vertical with closed top) tripple layer wall construction hoisted and fixed in position with ball valve of suitable size alongwith stands for collectors, staging of suitable height (for easy flow of water) for cold water tank made out of 50x50x6mm angle iron with PCC (1:2:4) as required complete with temprature gauge 0 to 100 degree centigrade, brass gate valve for hot and cold water pipes, horizontal type strainer on incoming water line, complete all as specified and directed.

ARBORICULTURE Supply & plantation of GULMOHAR (Delonix Regia) with saplings of 1.2 to 1.5 mtr hight including excavation of suitable size pit (size of pit shall not less than 75 cm dia & 75-80 cm deep) to accomodate the roots of plants including provision of good earth by treating with farm yard manure in the ratio (4:1), fertilizers and pesticides (i.e Bevation and neem cake BHC 10% linson dust. Thimment or phorate,manures super and vermicompost) and making up the trench area to proper levels, for its growth and maintaining by regular watering and weeding etc and maintaining for one year from the certified date of completion of the work complete all as specified & directed.

Ditto all as per item No 53.00 here in before but NEEM (Azadirachta Indica).

NOTE FOR ITEM NO. 53.00 to 54.00 (i) Height of plant shall be measured from top of follage ( not from the isolated branch/leaf,main stem) to 150mm from top of root. (ii) Water will not be supplied by MES. Contractor has to make his own arrangement for watering to plants and grass. (iii) The rates quoted by the contractor deemed to include watering, maintenance of plants till 2 years after certified date of completion of work. (iv) During 2 years after completion if any plant is found dead, or not of satisfactory growth, plants of approved size and shape shall be provided without any extra cost to the state. Simillarly the grass shall also be replanted without any extra cost if no desired growth is achieved during the period of 2 years. (v) Supply and application of manure, sweet earth and pesticides, fertilizers, etc up to 2 years after completion are deemed to be included in the quoted unit rate. (vi) Tenderer to note that 20% cost of quotation against these items shall be retaied for 2 years after completion. In case of failure by the contractor to maintain the plants as above, the same shall be carried out by the department at his Risk and Cost and the expenditure shall be deducted from this retained amount. (vii) The plants shall be brought at site Six months before the date of completion of the work as per Work order.