Repairing and Restoration o f footpath, bollards, nosing and central verge and kerb colour work and other related work at TP-50, 51 & 213 area and other area of Bodakdev ward of North West Zone. (ARC) (Reinvite)

NAME OF WORK: Repairing and Restoration of footpath, bollards, nosing and central

verge and kerb colour work and other related work at TP-50, 51 & 213 area and other

area of Bodakdev ward of North West Zone (ARC) (Reinvite).

It. No. Item Description Qty Unit

Dismantling the following including loading, unloading and

disposal of unserviceable material for all lead or as directed by

Engineer-In-Charge and stacking the serviceable material and

backfilling the resulting trenches and pits complete.

a central verge -kerb stone 102 Rmt 8

Dismantling tiled or stone floors laid in mortar including stacking

2 of serviceable material and disposal of uservicalble material with 10 Smt 47.25

all lead and lifts. SOR 23-24 IT CD NO:20005

Demolition & disposal of unservisable material with all lead and

lift for unreinforeced concrete. SOR 23-24 IT CD NO:20001B

Demolition of brick work & stone masonry including stacking of

serviceable materials and disposal of unserviceable materials

with all lead and lift (1) In cement mortar. SOR 23-24 IT CD

Demolition including stacking of serviceable materials and

e disposal of unserviceable materials with all lead and lift. (I) 2 Cmt 1047.38

R.C.C work. SOR 23-24 IT CD NO:20002

Extra rate over item of excavation of earth for excavation of

asphalt pavement / RCC of thickness up to 0.20 meter including

3 demolishing the asphalt carpet, metal,s oiling/cutting

Reinforcement etc.comp. with stacking the material as directed.

(Based on Previously approved rate by C E sir )

a up to 0.20 meter thickness (By Manual) 100 Smt 71.1

0.20 to 0.30 meter (By any type of Breaker Machine or

b R.C.C.Cutter machine including cost of operator, fuel, & 20 Smt 177.76

transportation etc complete.

0.30 meter & above (By any type of Breaker Machine or

c R.C.C.Cutter machine including cost of operator, fuel, & 5 Smt 311.08

transportation etc complete.

Barricading the entire break down or excavated area on rental

basis using wooden ballies / M.S.angles at max. 2.00 meter

centre to centre, C.G.I. Sheet, reflective paint / Board out side to

avoid accident & for smooth traffic diversion & movement

4 including cautionary board etc. Item also includes for making 100 Rmt 79.99

temporary sufficient nos of lighting arrangement through out the

work with necessary required arrangement. ..The same shall be

removed after completion of work. (Only for break down work

from start to complete)

Box cutting the road surface to proper slope and camber for

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed upto

Conveyance charge of earth, lime, murrum, building rubbish,

manure, garbage, sludge, excavated rock, fly ash, aggregates of

6 any kind executed outside the road site. Rate also includes

spreading & levelling etc complete. Internal conveyance above

50 mt done within the work site is not payable.

a a) Lead up to 1 Km. 1 Cmt 23.38

b b) Lead From 1Km to 2 Km. 1 Cmt 30.94

c c) Lead From 2 Km to 3 Km. 1 Cmt 38.37

d d) Lead From 3 Km to 4 Km. 1 Cmt 45.52

e e) Lead From 4 Km to 5 Km. 1 Cmt 52.42

f f) Lead From 5 Km to 10 Km. 100 Cmt 78.54

g g) Lead From 10 Km to 15 Km. 70 Cmt 104.65

h h) Lead From 15 Km to 25 Km. 1 Cmt 224.99

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including premixing

the Material with water at OMC in mechanical mix plant carriage

7 of mixed Material by tipper to site, laying in uniform layers in sub- cmt 2010

base / base course on well prepared surface and compacting

with vibratory roller to achieve the desired density as per Codal

A Production & Supply of WMM 60 Cmt 1975

B Laying of WMM 60 Cmt 35

Repairing damaged M.H. and rasing M.H. up to road level incl.

removing damaged brick work and repairing by brick masonry in

8 C.M. 1:5 and plaster in C.M. 1:3 and fixing C.I. steps and

existing MH sheet cover, removing the debris from MH and

carting the same as directed.

a (A) up to 0.15 mt. (@ Two Coarse) 5 Nos. 728.82

b (B) up to 0.35mt. (@ Four Coarse) 2 Nos. 1155.44

c (C) up to 0.65 mt. (@ Seven Coarse) 1 Nos. 1786.49

d (D) up to 0.90 mt. (@ Ten Coarse ) 1 Nos. 2150.9

Repairing damaged I.C./ Raising removing damaged brick work

and repairing by brick masonry in C.M. 1:5 and plaster in C.M.

9 1:3 and fixing C.I. steps and existing chamber sheet cover, 5 Nos. 399.96

removing the debris from chamber and carting the same as

Providing, laying and jointing in true line and level UPVC pipe

10 (SCH-40) of following dia. Including fittings of standard make as

approved by Engineer-in-charge.

a 15mm (IT CD NO 23061) 1 Rmt 71.93

b 25 mm (IT CD NO 23062) 1 Rmt 90.93

c 40 mm (IT CD NO 23064) 1 Rmt 146.65

d 50 mm (IT CD NO 23065) 1 Rmt 193.73

Providing and supplying,and jointing ISI mark only standard

length stoneware pipes of following class and diameter including

excavation for laying of pipes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. compl.

(IS651/1989 or its latest revision) including labour work for

lowering, laying, joiting with cement mortar (1:1) proportion,

proper postion, grade and alignment and all level as directed by

engineer in charge including store to site of work jointing material

a 100 mm dia (IT CD NO 24001AA) 1 Rmt 211.05

b 150 mm dia (IT CD NO 24001BA) 1 Rmt 288.23

c 230 mm dia 1 Rmt 400.54

DI to PVC connection Making/ Reparing Connection work for the

following dia. PVC pipe

a 50 mm dia 1 No. 841.69

b 75 mm dia 1 No. 1006.12

c 90 mm dia 0 No. 2537.52

d 110 mm dia 0 No. 2878.82

Brick work using common burnt clay building bricks having

crushing strength not less than 35kg./Sq.Cm. In foundation and

13 plinth in Cement Mortar 1:5.(1- Cement: 5 -fine sand)(B) 1 Cmt 4011.66

Conventional.(R & B Building Road Bridge SOR 2023-24 Item

Code 06001BA,Item No.as per NBO-6.12 page no.70 )

Providing15mm thick cement plaster in single coat on Rough

(Similar) side of single or half brickwalls for interior plastering

upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) (R & B Building Road Bridge SOR

23-24 Item Code 17002A,Item No.as per NBO-17.6 page no.129

Providing F.R.C. MH seat cover incl. carting to the work site etc.

15 comp. Directed. (Based on rate of central store circular 01/2021-

F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers. Cover :

728mm ø & 100 mm thick circular cover, 35.00 MT load design,

100x2mm MS flat allround, 16mm ø plain round bar for lifting the

cover & should be fitted with plastic cups.

Carting and Fixing M.H., Chamber or Catchpite Seat and Cover

in line and level to match exisisting road level in C.C. 1:2:4 and

16 finishing smooth, watering and protecting for 7 days etc. 1 Nos. 746.59

complete as directed. M.H. seat cover will be supplied

byA.M.C.(from any store)

Constructing Bombay Pattern Type Catch Pit of size 0.60 x

depth up to 1 mt including excavation, B.B.C.C. (1:5:10), 23 cms

thick brick maso. wall in the prop. of CM (1:6) with 40 mm thick

IPS flooring in the prop M15 at bottom and 15 mm thick cement

plaster inside the catch pit in the proportion of CM (1:3) with out

jali etc. comp. as directed.

Catch Pit Jali Fixing P/F FRC catch pit jali with frame 600mm x

18 600mm clear opening etc. comp.. As directed by Engineer-in-

Charge and/or his authorized representative.

A 20 MT Capacity 1 Nos. 3178.57

B 35 MT Capacity 1 Nos. 3784.82

Supplying and fixing of 380 mm H x 300 mm L x 200 mm B Kerb

block for Central Verge in M-20 grade using 20 mm nominal size

black trap aggregate of Sevaliya/Timba or equivalent quality for

pre-cast blocks, reasonably exposed finish/ formwork, mould

with well equipped with vibratory system for kerb stones of

approved design including curing, etc. complete, including the

cost of formwork etc. complete. The rate shall also include

necessary cutting of asphalt, fixing the Kerb stones in line and

level on 5 cm thick sand bedding with necessary equipments

and materials. The rate shall also include the flush pointing in

CM (1:3) for all joints of the kerbstones. Filling of zari alone the

sides of the kerb stone fixed with Bituminous concrete mixed in

proper position as directed by Engineer in change to form a

portable mixture. In any case Gravel or such type of materials

shall not be allowed for productiona) Laying on 5 cm thick Sand

Supplying and fixing of 300 mm-L x 150 mm-B x 380 mm-H

Kerb block for Footpath in M-20 grade using 20 mm nominal size

black trap aggregate of Sevaliya/Timba or equivalent quality for

pre-cast blocks, reasonably exposed finish/ formwork , mould

with well equipped with vibratory system for kerb stones of

approved design including curing, etc. complete, including the

cost of formwork etc. complete. The rate shall also include

necessary cutting of asphalt, fixing the Kerb stones in line and

level on 5 cm thick sand bedding with necessary equipments

and materials. The rate shall also include the flush pointing in

CM (1:3) for all joints of the kerbstones. Filling of zari alone the

sides of the kerb stone fixed with Bituminous concrete mixed in

proper position as directed by Engineer in change to form a

portable mixture. In any case Gravel or such type of materials

shall not be allowed for production. a) Laying on 5 cm thick Sand

Providing, supplying and fixing pre cast C.C. blocks (M-20) edge

kerb having size of 75 x 300 x 300 mm depth and as per design

21 conveying it to the site, jointing into C:M 1:3 and racking out the 5 Rmt 195.54

joints incl. necessary excavation of asphalt, soil etc. completed. (

Pre cast concrete kerb Providing and fixing M25 Grade of

concrete precast exposed / Fair finish / texture finish kerb stones

of approved make as per approved sample of any size and any

type. Kerbs shall be fixed on the foundation prepared as per

approved design. The rate shall also include for erecting and

fixing the pieces in position for complete kerb system with

chamfered type of kerbs including necessary accessories of kerb

22 like radius kerb, angles and quadrant kerbs, droplet kerbs etc. 20 Rmt 1061.61

complete as per drawing. Kerb shall be fixed as paper joint

without any jointing material. However cement mortar shall be

provided at the backside of kerb stone joint. (Sample must be

approved) Cost of excavation, cutting , base , side filling shall

includes as directed engineer - incharge in above item

description as per BOQ (a) 450 hight x 600x 150 mm high

Pre cast concrete kerb Providing and fixing M25 Grade of

concrete precast exposed / Fair finish / texture finish kerb stones

of approved make as per approved sample of any size and any

type. Kerbs shall be fixed on the foundation prepared as per

approved design. The rate shall also include for erecting and

fixing the pieces in position for complete kerb system with

chamfered type of kerbs including necessary accessories of kerb

23 like radius kerbs, angles and quadrant kerbs, droplet kerbs etc. 150 Rmt 912.5

complete as per drawing. Kerb shall be fixed as paper joint

without any jointing material. However cement mortar shall be

provided at the backside of kerb stone joint. (Sample must be

approved) Cost of excavation, cutting , base , side filling shall

includes as directed engineer - incharge in above item

description as per BOQ (b) 380 x 600 x 150 mm high Footpath

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick

of M200 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1cement:3fine sand) etc complete. SOR 23-24 IT NO

Supplying and fixing for central verge 230 mm L x 235 mm

Width x 680 mm H Supplying & Fixing in M-20 grade using

mm nominal size black trap aggregate of sevaliya/timba or

equivalent quality for pre-cast blocks,reasonably exposed

finish/formwork,mould with well equipped with vibratory system

for kerb stones of approved design including

curing,etc.complete,including the cost of formwork

25 etc.complete.THe rate shall also include necessary cutting of 1 Rmt 1376.75

asphalt,fixing the kerb stones in line and level on 5 cm thick

sand bedding with necessary equipments and materials.The rate

shall also include the flush pointing in CM(1:3)for all joints of the

kerbstones.Filling of Zari alone the sides of the kerb stone fixed

with bituminous concrete mixed in proper position as directed by

engineer in charge to form a portable mixture.In any case gravel

or such type of materials shall not be allowed for production.

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size ; shape

(Usually Uni-Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for footpath, parking areas,

service lanes and other areas as mentioned in the drawing

/ instruction of engineer in charge. Cost includes formworks

using rubber mould, Rate providing and laying paver blocks as

per required grading and specification. The paver block shall be

26 mechanically compacted. The work of paving blocks shall be 150 Smt 501.6

executed in line and level by skill mason of flooring work only. It

should be laid in such a way that the no cutting of the paver

block to be necessary. if cutting of paver block necessary then it

should be cut by machine only and carting. The finished surface

of the paver block shall have resonably good, plain finished.

Paver blocks shall be compacted and shall be relaid if

necessary. Gravel or such type of materials shall not be allowed

for production. Laying on 5cms thick sand beddding.

Providing and laying of interlocking grey paver blocks of

high density 80mm thick made from M-40 grade concrete

using 6 mm to 20 mm machine crushed well graded stone

aggregate, sand of approved quality, OPC 53 grade cement with

contractor's own concrete mix design as approved by AMC, for

parking, road. Cost Includes formwork, using rubber/FRP mould,

laying paver block as per required grading and specification laid

paver block shall be mechanically compacted. The work of the

paving blocks shall be executed in line and level by skilled

mason of flooring work only. It should be laid in such a way that

the no cutting of the paver block to be necessary. Cutting of

paver block by machine cut only and carting to be done. The

Finished surface of the Paver Block shall have reasonably good

plain finish. Paver blocks shall be compacted and shall be re-laid

if necessary. Gravel or such type of materials shall not be

allowed for production. Laying on 5 Cms thick sand bedding.

Paver Block Providing and laying shot blasted Non -

interlocking, Paver blocks of specified thickness, size, grade

of concrete and colour machine made and blasting by automatic

shot blasting machine and high density of as per approved

sample of approved make for footpath, parking areas, service

lanes,cross over and other areas as mentioned in the drawing.

Including providing and laying 50 mm thick averave bedding

layer of coarse sand below paver block as per required grading

and specification. Laid paver block shall be mechanically

compacted. The work of the paving blocks shall be executed in

line and level by skilled mason of flooring work only. Small size

of paver block with same specification shall be used at residue

or at end. It should be laid in such a way that the no cutting of

the paver block to be necessary. If cutting of paver block shall be

required , than cut by machine only and laying to be done by

skilled flooring mason. The finished surface of the paver block

shall have coarse sand Texture Finish. Pave blocks shall be

compacted and shall be re-laid if necessary. Actual laid area

shall be measured and paid without any wastage. (A) 60 mm

thick M-35 grade Grey Paver block of size 200mm x 200mm.

Paver Block Providing and laying shot blasted Non -

interlocking, Paver blocks of specified thickness, size, grade of

concrete and colour machine made and blasting by automatic

shot blasting machine and high density of as per approved

sample of approved make for footpath, parking areas, service

lanes,cross over and other areas as mentioned in the drawing.

Including providing and laying 50 mm thick averave bedding

layer of coarse sand below paver block as per required grading

and specification. Laid paver block shall be mechanically

compacted. The work of the paving blocks shall be executed in

line and level by skilled mason of flooring work only. Small size

of paver block with same specification shall be used at residue

or at end. It should be laid in such a way that the no cutting of

the paver block to be necessary. If cutting of paver block shall be

required , than cut by machine only and laying to be done by

skilled flooring mason. The finished surface of the paver block

shall have coarse sand Texture Finish. Pave blocks shall be

compacted and shall be re-laid if necessary. Actual laid area

shall be measured and paid without any wastage. (A) 80 mm

thick M-35 grade Grey Paver block of size 200mm x 200mm.

Labour work of fixing kurb any design of central verge, (both

side) footpath kurb, items includes necessary excavation,

asphalt cutting of any thickness, erecting in line and position and

pointing with cement mortar (1:3), watering, etc complete, filling

with zari along the side of the kurb, the kurb stone fix prepared

with bitumnious top surface, as directed by engineer in charge.

Soil Filling for Gardening/Plantation Providing and laying good

quality garden soil, obtained from outside which can be useful for

all plants as per specification. Garden soil shall be mixture of

part Garden Sweet Soil 1 part Coco Peat: 1 part Well Rotted

Organic Compost (1:1:1) including laying of soil in required

quantity and in proper slope as mentioned in drawing, watering,

compacting and dressing etc. complete, as directed in

specifications and by engineer in charge.Law Garden Rate)

Providing and laying cement concrete 1:5:10 (1- Cement : 5- fine

32 sand : 10- graded brick bat aggregates 40mm nominal size) and 1 Cmt 2492.51

curing complete. SOR 23-24 IT NO 05006A

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

33 Coarse sand : 6- Hand broken stone aggregates 40mm nominal 0 Cmt 4006.15

size) and curing complete. SOR 23-24 IT NO :05005A

Ready mix concreteProviding and laying in position Ready mix

concrete/ batch mix concrete of specified grade for reinforced

cement concrete work, using cement content as per approved

design mix (Min cementitious level as per latest IS 456 shall be

maintained) manufactured in fully automatic batching plant and

transported to the site of work in transit

mixer for all lead having a continuous agitated mixer, for

reinforced cement concrete work including pumping from transit

mixer to site of laying; cost of admixtures in recommended

proportions as per IS: 9103 to accelerate,

retard the setting of concrete, improve workability without

impairing strength and durability; finishing, compacting, vibrating,

curing, dewatering (if required), etc, excluding the cost of

Formwork and reinforcement, etc complete for all elements, all

floors, all level, any heights/ depths, any lead and lift as directed

by Engineer Incharge.

A Concrete of M 15 grade (R & B SOR 23-24 IC: 5054 Page 66) 35 Cmt 3790.21

B Concrete of M 20 grade (R & B SOR 23-24 IC: 5055 Page 66) 12 Cmt 4793.1

C Concrete of M 25 grade (R & B SOR 23-24 IC: 5056 Page 67) 0 Cmt 4853.56

D Concrete of M 30 grade (R & B SOR 23-24 IC: 5057 Page 67) 0 Cmt 5043.66

Painting Two Coats on divider and footpath curb surface / New

Concrete Surface ( Painting two coats after filling the surface

with synthetic enamel paint in all shades on new plastered

concrete surfaces)

RETRO –REFLECTORISEED TRAFFIC SIGNCautionary

Warning Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel);

size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-

67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type- 4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand post of Iron

Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

36 frame fabricated from suitable size iron angle of 35 x 35 x 3mm; 1 Nos. 3867.51

painted with bestquality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting SOR 2324 IT CODE:26092B

Supplying And Fixing Jumbo bollard swiss type Made out of

1.5 cm crc sheet height 188 cms. Bottom dia 30 cms.

Top dia 18cm. With direction plate of 45cm dia.

37 Fabricated as per attached drawing, pre treated with 2 Nos. 6463.35

phospheting process painted with apoxy coating

reflectorised with retro reflective sheetings specified by

M.O.R.T & H.'s latest specification.(B) High Intensity Grade.

RETRO –REFLECTORISEED TRAFFIC SIGN Regulatory /

Mandatory Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel);

size 60 cms Dia Circle as per design of IRC- 67-2012. Pre

treated with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro refiectivesheeting

of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm

/ 65NB Circular MS Pipe as required and frame fabricated from

38 suitable size iron angle of 35 x 35 x 3mm; painted with 1 Nos. 4573

bestquality epoxy coatings in black and white bends. The details

of symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting SOR IT CO:26094C

Facility Informatory Sign :-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 80 x 60 cms. rectangular as per design of IRC- 7-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High Intensity rismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand post of Iron

Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm;

39 painted with bestquality epoxy coatings in black and white bends. 1 Nos. 3951.1

The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting. SOR 23-24 IT CD NO

Hazard Marker Sign :-Providing and fixing sign boards made out

of 2.0 mm aluminium sheet / 4 mm ACP (Aluminum composite

Panel); size 90x30 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 1.8mtr long stand post of 75 x

x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white bends.

The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

xcavation, curing etc.complete under the supervision of engineer

in charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A) Class-C

Type-11 Retro Reflective sheeting SOR 23-24 IT CODE:26102C

Give Way Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel);

size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-

67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x

x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white bends.

The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third party test lab for

the product offered shall be submitted by contractor. (A) Class-C

Type-11 Retro Reflective sheeting SOR 23-24 IT NO:26097c

Providing and fixing Swiss type bollard made out of

1.5mm CRC sheet ,height 140cms,bottom dia

23cm,top dia 12cm with direction plate of 30 cm dia

fabricated necessary anchors as directed and also provide

42 through out lengh pipe of 25 NB for the strenthing of 15 Nos. 3696

bollard and reflectorised Micro Prismatic Grade Sheet

(Type XI)and three yellow strip 6 Inches wide of Type XI

Retro reflective Sheeting, fixing with P.C.C M25 grade

concrete(Foundation size 30cm×30cm×35cm).

Direction (Junction) Sign :-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 244x122 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand

post of Iron Angle 75 x 75 x 6mm / 65NBCircular MS Pipe as

required and frame fabricated from suitable size iron angle of

50x50x5mm; painted with bestquality epoxy coatings in black

and white bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under the Supervision

of engineer in charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third party test lab for

the product offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting SOR 23-24 IT CODE 26098B

Providing TMT Bar FE500D reinforcement for R.C.C. Work

44 including bending,binding and placing in position complete upto 25 Kg 75.46

floor two level SOR 23-24 IT NO :05014C

Providing and setting 50 to 60 mm thick rouge kotah stone water

table in line, level and in required gradient including 25 mm thick

beddcing in C.M. 1:6 (1 Part of cement : 6 Part of coarse sand)

with sufficient ramming consolidation. Providing joints in C.M. 1:3

(1 Part of cement : 3 Part coarse sand) and smooth pointing in

C.M. 1:1 (1 Part of Cement, 1 Part of coarse sand) including

watering etc. complete and as per details in tender specification

& as directed by engineer in charge.

B Size : 1' x 1'(40 to 50 mm thick) 5 Rmt 103.52

Fabricating, supply and erecting in position Standard Structural

steel sections conforming to IS 2062 for railing , skywalk, stair,

or other works using ISMB, ISA, ISMC, MS plate, flat, square

bars, pipe, square pipe, rectangular sections, square section,

tube, etc. including welding, cutting, wastage, etc. complete. The

rate is inclusive of welding rod, supply & fixing of correct size nut,

bolts, washers, including one primer coat of red lead paint

46 conforming IS:102 Zinc chromate paint conforming to IS:104 10 Kg 126.68

followed by two coat of aluminium paint as per IS:2339 OR

enamel paint of color as selected by engineer incharge, with all

contractor's materials, labour, tools & plants, in bolted/welded

construction as directed by Engineer-in Charge. The waste cut

pieces shall not be included in the paying quantity. The work

shall be done as per drawing and specification. The work shall

be carried out as per IS:800, IS:816

Labour work for fixing interlocking blocks / any kind of pavement

47 on up to 50 mm th sand bedding, levelling, watering and fixing in 732 Smt 68.64

line & level as well cleaning the site etc.comp. as directed.

Supply and installation of concrete bollard of size 300mm

diameter x 900mm height, constructed using M-30 concrete and

4nos 8mm dia MS Fe500 reinforcement through the section as

directed by EIC including supply of all

Providing and fixing Tree Guard with grey exposed finish in

49 grade M-20 with nominal steel and wall thickness of 100mm.

(Approved Extra Item Rate)

a Outer Size 700X700 15 NO. 794.64

b Outer Size 900X900 15 NO. 1121

Total Amount Rs.

Total Amount Rs.